So one of my friends at work had an att tilt. However his son dropped it out of his pants pocket and the screen popped off. Screen is still in one piece however completly seperated from the tilt mechanism and the ribbon cable is missing. So I told him instead of throwing it away (cause att does not offer insurance) to give it to me and I'd see what I can do (Gonna unlock it and use it as an upgrade for my wing ).
I've read some of the hardware manuals and can already see I'll need parts to fix it. But I have no ideas what ones. Or if it's even worth it to fix. I mean its basically a free tilt minus any repair costs. Any help?
wshader said:
So one of my friends at work had an att tilt. However his son dropped it out of his pants pocket and the screen popped off. Screen is still in one piece however completly seperated from the tilt mechanism and the ribbon cable is missing. So I told him instead of throwing it away (cause att does not offer insurance) to give it to me and I'd see what I can do (Gonna unlock it and use it as an upgrade for my wing ).
I've read some of the hardware manuals and can already see I'll need parts to fix it. But I have no ideas what ones. Or if it's even worth it to fix. I mean its basically a free tilt minus any repair costs. Any help?
Click to expand...
Click to collapse
Check thi site, there is a manual how to dismantle kaiser. Could be helpful:
http://michael-channon.spaces.live....smantling+%2f+Disassembling+Guides+HTC%2fETEN
Thank you, however thats actually the repair manual I looked at. However while looking for parts I have yet to find the ribbon cable that connects to the display.
This is basically what I have except the ribbon cable is missing. And alot of steps missing to get it this way.
wshader said:
Thank you, however thats actually the repair manual I looked at. However while looking for parts I have yet to find the ribbon cable that connects to the display.
This is basically what I have except the ribbon cable is missing.
Click to expand...
Click to collapse
OMG, that had to hurt.
Yeah, kid was playing basketball and fell out of his pocket. I guess the kid has broke 4 phones this month... curve, tilt, 2 pantec duos. Told my friend to get him a $20 go-phone now lol. And use the savings to get me a tilt
I dont know what kind of damage besides the physical the drop may have caused. Phone was not on at the time so that may have helped it (I hope)
wshader said:
Yeah, and I dont know what kind of damage besides the physical the drop may have caused. Phone was not on at the time so that may have helped it (I hope)
Click to expand...
Click to collapse
I hope u repair it. Wish u luck.
Without actually looking at it, its hard to say what exactly you need. But you for sure need a new flex cable. Unfortunately that is the hardest part to find. At least here in the US. I usually buy broken phones from people who don't want to pay for a repair. Then I use the parts from them. You can get a new housing easily enough if you need it but the flex cable will be your biggest hurdle.
I suggest trying to find one broken on ebay and using the 2 you have to make one working phone. Even a broken Tilt can run for $200 on ebay though.
Anyone notice that case has already been replaced at some stage as it has a camera hole (not standard for Tilts) a keyboard without the white part and no logo. Perhaps the replacement was weaker than the original one. If the O/P searches the forum here for LCD Screen replacements there's loads of links to different companies supplying parts for Kaiser variants. I have no experience using any of them though so cant suggest which ones are best.
@Planet Neo
Yeah I was thinking that but was hoping it wouldn't come to that. Would suck to spend $200 for parts just to find the motherboard is broke or something to that effect. Was hoping someone knew of a place to buy a new cable or had one to sell. Also was hoping someone with some experience could let me know if they think I'd need a new tilt assembly.
@Flying Kiwi
Lol, I used a picture from kaiser disassembly guide to show what i was referring to. It has the standard tilt case. I'll be taking pictures of what I have as soon as I have the phone in my possession.
Okay I assume that its going to be very hard to get the ribbon and you're going to need housing. I believe that it will be the same as making a new tilt, because the screen is as good as dead without the ribbon so all you could do is get new housing and a new screen and it should rack up about $150-200. Which in my opinion is much easier and faster and better than frustrating on getting a ribbon.
Just my 2 cents.
Kraize
Planetneo said:
Without actually looking at it, its hard to say what exactly you need. But you for sure need a new flex cable. Unfortunately that is the hardest part to find. At least here in the US. I usually buy broken phones from people who don't want to pay for a repair. Then I use the parts from them. You can get a new housing easily enough if you need it but the flex cable will be your biggest hurdle.
Click to expand...
Click to collapse
I'm sure you'll think I'm busting your balls / stalking you but hard to find? Hell no! Expensive, maybe ( $100) but hard to find? I think not. Good job you're not charging people for you expert advice else they'd be wanting refunds....how long did you say you'd been doing this for?
http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=tytn+flex&category0=
You need a TYTN II flex. There are many other suppliers and if you go direct they may be a bit cheaper. google is your friend....
To check the board - connect to a windoze computer with a mini USB cable and power up or press the soft reset button to boot it - it should ident and install then try to sync. It should boot fine even with no LCD if it's OK assuming the battery still holds some charge.
A full housing will run you about $60. Some sellers have just front panels for about $40 though I'm unsure if these have the pivot.
M.S
Mysterious Stranger said:
I'm sure you'll think I'm busting your balls / stalking you but hard to find? Hell no! Expensive, maybe ( $100) but hard to find? I think not. Good job you're not charging people for you expert advice else they'd be wanting refunds....how long did you say you'd been doing this for?
http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=tytn+flex&category0=
You need a TYTN II flex. There are many other suppliers and if you go direct they may be a bit cheaper. google is your friend....
To check the board - connect to a windoze computer with a mini USB cable and power up or press the soft reset button to boot it - it should ident and install then try to sync. It should boot fine even with no LCD if it's OK assuming the battery still holds some charge.
A full housing will run you about $60. Some sellers have just front panels for about $40 though I'm unsure if these have the pivot.
M.S
Click to expand...
Click to collapse
Man, MS you really need to get off my nuts. It's getting creepy. I said in my post hard to find at least in the US. And the link you gave was for a seller in China. One more word of advice for the OP, Make sure this part actually works for the AT&T Tilt variant. I had a customer buy a Flex cable for the HTC Herald thinking it would work for the T-Mobile Wing but due to the modified button layout of the Wing it did not fit correctly. Much like this person HERE experienced.
Planetneo said:
Man, MS you really need to get off my nuts. It's getting creepy. I said in my post hard to find at least in the US. And the link you gave was for a seller in China. One more word of advice for the OP, Make sure this part actually works for the AT&T Tilt variant. I had a customer buy a Flex cable for the HTC Herald thinking it would work for the T-Mobile Wing but due to the modified button layout of the Wing it did not fit correctly. Much like this person HERE experienced.
Click to expand...
Click to collapse
These things are made in Shenzhen so where you think the parts come from?
Stop talking &*%(* and I'll stop correcting your posts Instead of saying something is a fact say it's your opinion. It's not a 'rare' part - and they ship WORLDWIDE. It's not as if he'll get one from a local mom and pop store - it's gonna be mail order wherever you get it from and looking at the seller's feedback is a good judge - all my parts come from China - so why pay a middleman such as yourself extra $ just so it has a US stamp on the package?
Someone needs to act as quality control on your posts and it looks like it's gonna have to be me if you keep posting [email protected]
M.S
Related
I was carrying a heavy box today against my body, I must have jammed a corner into my tilt, because afterwards the screen is all white with a black spot. I am pretty sure it is a cracked LCD.
1. Anyone have any advice on getting service through ATT? I heard they had a 30 day no questions asked policy. It is obviously a cracked screen, pretty sure they wouldn't deal with that.
2. It was paid for on a visa, do they have something I can take advantage of?
3. Where is a good/cheap place to buy the replacement parts? I am not too worried about digging in and fixing it myself.
4. What are my options for paying someone to fix it? HTC, ATT, or otherwise?
I really appreciate your help, I am terribly aggravated with myself for break it. Just trying to minimized the damage right now.
DBordello said:
I was carrying a heavy box today against my body, I must have jammed a corner into my tilt, because afterwards the screen is all white with a black spot. I am pretty sure it is a cracked LCD.
1. Anyone have any advice on getting service through ATT? I heard they had a 30 day no questions asked policy. It is obviously a cracked screen, pretty sure they wouldn't deal with that.
2. It was paid for on a visa, do they have something I can take advantage of?
3. Where is a good/cheap place to buy the replacement parts? I am not too worried about digging in and fixing it myself.
4. What are my options for paying someone to fix it? HTC, ATT, or otherwise?
I really appreciate your help, I am terribly aggravated with myself for break it. Just trying to minimized the damage right now.
Click to expand...
Click to collapse
1. They will charge you for breaking it.
2. No, you can only dispute a charge if they didn't hold up their end of the bargain, you broke the phone, its your problem now.
3. I dont know
4. I believe they will charge a lot, but still less than a whole new phone. See how much it costs and then also see how much you can get on eBay for your broken one and how much a new one will cost you.
Good luck, I had the same luck as well, wasnt even a week of having my tilt and it fell in a bunch of clothes and had a small crack the slowly did the same results of your screen, I had to go through hoops to get a replacement from AT&T, not my most favorite people to say the least.. :-\ Just got my replacement yesterday as the phone died Monday.
petard said:
1. They will charge you for breaking it.
2. No, you can only dispute a charge if they didn't hold up their end of the bargain, you broke the phone, its your problem now.
3. I dont know
4. I believe they will charge a lot, but still less than a whole new phone. See how much it costs and then also see how much you can get on eBay for your broken one and how much a new one will cost you.
Click to expand...
Click to collapse
Ya, they will charge you with either buying a refurb phone, let you get a junky replacement phone if you cant afford it, or 3, raise hell with 611, and in the local AT&T athorized store you bought it from.
I've seen a few replacement screens on ebay if you have the guts to take your phone apart you could try one of those.
petard said:
1. They will charge you for breaking it.
2. No, you can only dispute a charge if they didn't hold up their end of the bargain, you broke the phone, its your problem now.
3. I dont know
4. I believe they will charge a lot, but still less than a whole new phone. See how much it costs and then also see how much you can get on eBay for your broken one and how much a new one will cost you.
Click to expand...
Click to collapse
regarding 2, I heard that visa offers some sort of protection plan for items purchased with it. I wasn't planning on back charging it.
I was unable to find any screens on ebay, but I'll keep looking. I found a replacement service for $170.
Here is a link to a screen that i found on ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=270204138123&Category=41343
http://www.pocketpctechs.com/main~unit~ATT_Tilt-974~area~repairs~action~updateunit.htm
LCD and touchscreen replacement service.
A7LAS said:
Here is a link to a screen that i found on ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=270204138123&Category=41343
Click to expand...
Click to collapse
That doesn't look like too bad of an option. I need to read about what is involved to install it. I think i have seen some posts of people have issues even after replacing the screen (incompatability?).
Also, that is in Hong Kong, yuck. Perhaps I can find one that is in the US and includes the tools required.
Thanks for pointing me in the right direction though.
I just purchased this screen:
http://cgi.ebay.com/ws/eBayISAPI.dl...em=270204431330&_trksid=p3984.cTODAY.m238.lVI
Does anybody forsee any issues replacing it? I found directions online.
I actually changed my mind about repairing the screen myself after reading the directions. It seems risky that I'd break it myself.
1. Do you recommend I get a 3rd party to repair it? Pocket pc techs is an option ($170)
2. I called HTC today, they said screen replacement starts at $193. I am guessing that it is worth the extra $20 to have it done by HTC, perhaps it won't void the (rest) of the warranty?
-Dan
As this is my first post I would just first like to say thank you to everyone who has contributed to this forum, without it this new smart phone user/AT&T subscriber wouldn't have been able to figure anything out.
Long story short: I just bought a new Tilt like three weeks ago and the LCD is already cracked. AT&T doesn't offer insurance on this phone and I am not entirely sure about HTC's manufacturers warranty. I checked across the forums and found some good information regarding replacing broken Tilt LCD screens, it all just seems fairly old. What I am wondering is what is the cheapest, easiest way to fix the LCD on the Tilt? Right now the cheapest I can find the LCD/Touchscreen combo with the right tools is $69.99 plus $12.99 S+H. Is this the best bet? Any other options I haven't thought of yet?
Also, I can't seem to find detailed picture instructions regarding the LCD swap anywhere on the forum? So where are the best directions for this online?
Now, time for a little rant. How the hell does AT&T not offer insurance for a phone that retails for over $300 brand new? Let's get serious here, it's an expensive piece of gadgetry that I happen to pay a lot of money for to use every month. The least they could offer their highest paying customers is a chance for insurance. By not offering insurance to their customers AT&T is basically saying "Piss off, oh, and make sure you pay your bill on time!" with a permanent smile on their face as they walk to the bank with our money. I'm sick of phone companies saying "I'm sorry, theres nothing I can do for you" to the customers that finance their paychecks, vacations, and replacement trophy wives boob jobs. I understand it's a service based industry and everyone wants their service, giving them the ultimate upper hand in the situation. But let's start thinking a little bit more with our heads and a little less with our wallets. It's time for these places to realize how ridiculous they are sometimes.
Apologize for the missive their, but man did it feel good.
l3urton32 said:
As this is my first post I would just first like to say thank you to everyone who has contributed to this forum, without it this new smart phone user/AT&T subscriber wouldn't have been able to figure anything out.
Long story short: I just bought a new Tilt like three weeks ago and the LCD is already cracked. AT&T doesn't offer insurance on this phone and I am not entirely sure about HTC's manufacturers warranty. I checked across the forums and found some good information regarding replacing broken Tilt LCD screens, it all just seems fairly old. What I am wondering is what is the cheapest, easiest way to fix the LCD on the Tilt? Right now the cheapest I can find the LCD/Touchscreen combo with the right tools is $69.99 plus $12.99 S+H. Is this the best bet? Any other options I haven't thought of yet?
Also, I can't seem to find detailed picture instructions regarding the LCD swap anywhere on the forum? So where are the best directions for this online?
Now, time for a little rant. How the hell does AT&T not offer insurance for a phone that retails for over $300 brand new? Let's get serious here, it's an expensive piece of gadgetry that I happen to pay a lot of money for to use every month. The least they could offer their highest paying customers is a chance for insurance. By not offering insurance to their customers AT&T is basically saying "Piss off, oh, and make sure you pay your bill on time!" with a permanent smile on their face as they walk to the bank with our money. I'm sick of phone companies saying "I'm sorry, theres nothing I can do for you" to the customers that finance their paychecks, vacations, and replacement trophy wives boob jobs. I understand it's a service based industry and everyone wants their service, giving them the ultimate upper hand in the situation. But let's start thinking a little bit more with our heads and a little less with our wallets. It's time for these places to realize how ridiculous they are sometimes.
Apologize for the missive their, but man did it feel good.
Click to expand...
Click to collapse
Mike Channon has links to Disassembly guides. Try a search for "Kaiser Disassembly Guide." My expert opinion, remember advise it worth waht you pay for it , is that the $70 is a good deal.
EDIT: I'm in a good mood. Searched for you today. Kaiser Disassembly Guides.
And s response to your rant. See this is why Mobile Phone Companies have the WORSE customer service rating of ANY business.
yea I cracked my screen as well about a month after having it.. I ended up buying a screen replacement for 115 off of ebay...
But now be careful... When i broke my screen, I thought that was the only damage the phone took... well the impact was right above where the sim tray is... and it damaged it as well.. my phone wasn't able to read sim cards anymore after replacing the screen... So I did a bold move, and told AT&T warranty support that my phone all of a sudden didnt read my card anymore.. i sent it back to them, and they sent me a replacement...
they could have charged me $400 for sending them a broken "out-of-warranty" item but i lucked out
l3urton32 said:
..How the hell does AT&T not offer insurance for a phone that retails for over $300 brand new? Let's get serious here, it's an expensive piece of gadgetry that I happen to pay a lot of money for to use every month...
Click to expand...
Click to collapse
That is exactly why they don't provide insurance for it. I asked a friend who works for them and he said that was the main reason. However if you live in dc metropolitan area there is a company called "Simply wireless" that offers insurance for any kind of mobile device and its 60 or 70 bucks upfront one time and insurance is good until something happens to device. Didn't get it myself but could be worth looking into.
p.s. i was also going to refer you to micheal but i Jimmy's already done it
Thanks to both of you already. Jimmy thanks for posting those directions, they look a little more intense than I thought but I don't think I'll have a problem replacing it myself. the $70 is way cheaper than the $170 from pocketpctechs.com
How would I make sure everything else is working fine on my phone? It's still syncing fine with my laptop and sends/receives calls, so I imagine its still fine. Is there a SIM access point through WMDC? Just to check that?
Also, anyone know any other ways to possibly get around this warranty here? The screen broke this morning, and I'm still not entirely sure how it happened. I had left my wall charger back home and only had my usb plug to charge my phone from. I woke up to the screen cracked and my phone being really really hot. The phone was at the foot of my bed, so I am not ruling anything out like me accidentally pushing in the screen, but has there ever been issues with the Kaiser's over heating and popping their LCD screen?
Thanks
Thanks to both of you already. Jimmy thanks for posting those directions, they look a little more intense than I thought but I don't think I'll have a problem replacing it myself. the $70 is way cheaper than the $170 from pocketpctechs.com
How would I make sure everything else is working fine on my phone? It's still syncing fine with my laptop and sends/receives calls, so I imagine its still fine. Is there a SIM access point through WMDC? Just to check that?
Also, anyone know any other ways to possibly get around this warranty here? The screen broke this morning, and I'm still not entirely sure how it happened. I had left my wall charger back home and only had my usb plug to charge my phone from. I woke up to the screen cracked and my phone being really really hot. The phone was at the foot of my bed, so I am not ruling anything out like me accidentally pushing in the screen, but has there ever been issues with the Kaiser's over heating and popping their LCD screen?
I used to work for Simply Wireless, and Mobile Solutions.. both a crooks.. dont buy from them, and definietly dont buy their insurance...
even though they are trying to clean their act up, their are 100% sales driven and dont give a f*ck bout their customer... trust me like i said, i worked for them...
if ur in the DC metro area, check out Wireless Jungle, they are located in Burke, Manassas, Herndon, and other parts of NoVA, they are excellent imo
l3urton32 said:
Thanks to both of you already. Jimmy thanks for posting those directions, they look a little more intense than I thought but I don't think I'll have a problem replacing it myself. the $70 is way cheaper than the $170 from pocketpctechs.com
How would I make sure everything else is working fine on my phone? It's still syncing fine with my laptop and sends/receives calls, so I imagine its still fine. Is there a SIM access point through WMDC? Just to check that?
Also, anyone know any other ways to possibly get around this warranty here? The screen broke this morning, and I'm still not entirely sure how it happened. I had left my wall charger back home and only had my usb plug to charge my phone from. I woke up to the screen cracked and my phone being really really hot. The phone was at the foot of my bed, so I am not ruling anything out like me accidentally pushing in the screen, but has there ever been issues with the Kaiser's over heating and popping their LCD screen?
Click to expand...
Click to collapse
honestly i doubt heat caused it... looking at my phone, i have enough room to stick my fingernail under the casing sourrounding the screen, so there is alittle room to move in case heat does expand the internals. My phone has gotten pretty damn hot before, to the point where i couldnt hold it (forgot it in the car with wifi bt and gps on... in 105F temp) and it was still fine....
I dont condone this... but when i broke my screen, i was extreemly careful in replacing it, and made sure not to add any additional scratches... once i was done, the phone looked like it did on day 1... so when i sent it back to AT&T there was no way they could tell it had been cracked open...
if ur phone still rings, and u can answer the calls, u should be ok...
I actually had the insurance prior to switching over to the tilt in October. In December my screen cracked and I called them and they said that since I was a long standing customer, they would replace it. they sent me a refurbished phone in 2 days.
I broke the scren again in February and this time I did not call immediately. about a month later I went past the store and told him the situation and he said to call again. I did and they sent me another one. they canceled my policy because I had two claims in one year. but they told me that I could pick it up again in a year.
Moral: always ask...you never know!
Awesome, more good info from everyone. I'm from the Rochester, NY area. Any idea if theres some sort of place that will insure any branded phones in my area? Google is failing me here. Also, do these places have to check your phone before they insure it? If theres some way I can get around that and put insurance on my phone I would just wait like a week and send it in...
yea if they "forget" to remove the insurance plan... or if u ask a stupid rep to add it, and they do... ur golden, and they will replace ur phone... I'm still grandfathered in with my insruance
btw kendall sent u a pm
so maybe AT&T is getting a little smarter. I called and got 4 different customer service reps and all of them told me it was ineligible...no luck with the bull**** approach. HTC USA said no go on everything too... I am getting a little fed up here. I have had this phone for only 3 weeks and everywhere I go everybody pretty much just dismisses me. My favorite dialog of the day came with one AT&T rep who was pissed off at more than just me trying to get an answer from her. And this is after she already told me the Tilt was ineligible for insurance
Me: So basically what your trying to say is that if I break my phone I'm pretty much screwed
AT&T Lady: umm... well. You can apply to get insurance on your phone and than you would be covered.
Me: you just told me I can't put insurance on my phone at all and you can't fix it for me
AT&T Lady: Wait. You can't put insurance on this? Hang on. (here she put me on hold to, what I assume at least, check her facts again) Alright Mr. Davis we can't insure your phone. Can I offer you a replacement Tilt at full retail price?
Let's get it it together AT&T, support the customers that pay your bills. We don't get the corporate discounts you get so it's a little ridiculous having to deal with all this crap.
Suggestion here...add an LCD Replacement walk-through to the Kaiser specific Wiki...or perhaps a whole section concerning DIY repairs and mods...Just something concise so it's a little easier to find. Thanks again to everyone though.
Lcd Screen
the cheapest i found was $65 for the lcd and $8 Shipping from. WWW.HTCLCD.COM comes with the tools to replace it.
Good instructions also on their website.
belize2004 said:
the cheapest i found was $65 for the lcd and $8 Shipping from. WWW.HTCLCD.COM comes with the tools to replace it.
Good instructions also on their website.
Click to expand...
Click to collapse
Thanks a lot! I'm ordering now and will see how it all works out.
I found a new place that will replace the screen with quick turnaround for $125
www.northbayelectronics.com
I am sending mine today!
well my screen cracked... anyone think of a reason this replacement screen won't work? I bought it just now, $14, no big deal if it isn't what I need... but can anyone see how this might not be what I need?
http://cgi.ebay.com/TOUCH-SCREEN-FO...NameZWD4VQQcmdZViewItemQQ_trksidZp1638Q2em124
that auction appears to just be for the touch screen overlay, not the LCD screen.
ericmcintire said:
well my screen cracked... anyone think of a reason this replacement screen won't work? I bought it just now, $14, no big deal if it isn't what I need... but can anyone see how this might not be what I need?
http://cgi.ebay.com/TOUCH-SCREEN-FO...NameZWD4VQQcmdZViewItemQQ_trksidZp1638Q2em124
Click to expand...
Click to collapse
I'm trying it. Please see:
http://forum.xda-developers.com/showthread.php?t=337102&page=10
and the page after. Should be interesting.
i ordered from htclcd.com (redirects to blackberry8100parts.com) on tuesday afternoon; i just received it from DHL. came in two separate boxes, one was the screen and tool, the other was another tool (different sizes). price was 68.80 including shipping from omaha, ne to knoxville, tn. regrettably i left the tilt at home so i can't do the replacement in the office today; i'll update when i've done the replacement (successfull or otherwise...) this evening or tomorrow morning. i'll try to remember to take some pics.
take off the four outer screws, and GENTLY GENTLY GENTLY pry the outer plastic bezel/frame off. you have to remove a philips head screw inside and to the left of the ear-peice speaker (as you look at the board from the back of the ear-peice (i.e. the inside of the bezel); i did not put this screw back on when re-assembling, i did pry the ear-piece connectors up a little to make sure they had enough stroke to make contact. you will need to remove GENTLY the adhesive that holds the sim-carrier to the back of the screen. once the parts are apart you can see the plug to remove the screen from the back of the button pad. reverse to reassemble. you do not have remove any peices from the main body or remove the screen from the main body IF you are only replacing the touch screen. i'll have my pics uploaded some time tomorrow. FYI, htclcd.com did not include the "plastic tool" that you are to use to pry the bezel off with but judicious use of a micro-driver and a guitar pick got the job done; for 20$US less than the competition and 2 day delivery, i am very happy with my purchase from them (htclcd.com = blackberry8100parts.com).
cheers all!
mine's gotten pretty beat up. how hard is it to a) find replacements for and b) replace the:
housing/body
digitizer
trackball
and could a noob do it? the only other device I've done a case swap on was a psp 3000.
and I don't have a warranty, so that isn't an issue.
and how do I know if something like this is authentic?
http://cgi.ebay.com/Original-Housin...wItemQQptZPDA_Accessories?hash=item3a586212fb
gonintendo said:
and how do I know if something like this is authentic?
Click to expand...
Click to collapse
I don't think you could just walk into any store and find a housing for the G1 or nearly any phone for that matter. Maybe a wireless shop that deals with all types of phones might be able to get there hands on it.
As far as knowing whether that ebay ad is authentic, you really can't say. I would contact the seller and ask him personally. Also, 22 bucks isn't bad at all.
anyone else?
I'm also interested in this issue as I want to switch from black to white. Anybody?
bump...............
It has to say OEM in the description (original equipment manufacturer) if you want it to be authentic. Here's a link on dissasembly. It's straight from HTC
mejorguille said:
It has to say OEM in the description (original equipment manufacturer) if you want it to be authentic. Here's a link on dissasembly. It's straight from HTC
Click to expand...
Click to collapse
thank you.
has anyone here ever done it? any tips/tricks/warnings about doing it?
Not too hard, you just have to be really careful not to damage/remove internals xP
protomanez said:
Not too hard, you just have to be really careful not to damage/remove internals xP
Click to expand...
Click to collapse
ooh, well I took apart a psp once for the same reason and I broke the connector for the screen's ribbon cable (apparently super glue is not a conductor b/c i was able to super glue it back on and it worked from then on) but I guess I now know to make sure to try moving the little lever in both directions and not to apply force.
If anyone has ever taken apart a psp, how does this compare to it?
gonintendo said:
ooh, well I took apart a psp once for the same reason and I broke the connector for the screen's ribbon cable (apparently super glue is not a conductor b/c i was able to super glue it back on and it worked from then on) but I guess I now know to make sure to try moving the little lever in both directions and not to apply force.
If anyone has ever taken apart a psp, how does this compare to it?
Click to expand...
Click to collapse
bump please, I am interested in this as well... I have customized/built computers, fixed iphones, xbox remotes, xbox and xbox 360s ...not to mention took apart a TV, and a few laptops....
anything compareable in that list at all?
What would you rate the difficulty of replacing the entire housing on the G1 ? Please advise me..
I am getting ready to undertake this task as well. I ordered a complete replacement from Hong Kong OEM branded, the works. I will be documenting the process step by step, and may even make a youtube video, and link them here, to contribute to the HTC G1 community. It'll be at least 3 weeks before it comes, though, most likely. If you haven't done it by then, look for my work.
Ninjineer said:
I am getting ready to undertake this task as well. I ordered a complete replacement from Hong Kong OEM branded, the works. I will be documenting the process step by step, and may even make a youtube video, and link them here, to contribute to the HTC G1 community. It'll be at least 3 weeks before it comes, though, most likely. If you haven't done it by then, look for my work.
Click to expand...
Click to collapse
I will be looking forward to that!...
...................
i was thinking about doing this but i never really got to it because none of the sellers had a manual on how to do it. ive taken apart ipods and whatnot but i love my g1 and i really dont want to mess it up :l.
I cracked my screen so I decided to order a new one and fix it myself, while in the process I accidentally tore the top flex circuit board and now I can't find spare parts other than screens anywhere. Does anyone know where I can get some or have one that is broken I am willing to pay ...
Hate when **** like that happens. . . try to fix something and something doesn't go right.
Not sure where you can get the parts you're looking for, but wanted to give props to you for taking the initiative to try and fix it yourself. Alot of people will be like "that's what you get for not just sending it back to HTC and having them fix it." How're you going to appreciate the intricacies of something if you don't take the occasional risk like this?
Hope you find what you're looking for.
Ps. Have you looked at http://www.monoprice.com/home/index.asp to see if there's anything you could repurpose to work?
Ha yea, I am definitely a DIY-er. Unfortunately this is a risk I knew I was taking heading into it, wasn't too worried though because I have fixed a lot of cell phones in the past, just got a little too careless with prying open with a flat head screw driver, it slipped and cut right into the flex circuit board. Should have been a little more careful haha. New screen looks great though! Now only if I could get it to power on! Of course HTC tells me it will cost up to $300 to send it to them to fix it.
http://www.lunacommerce.com/154-nexus-one
http://www.google.com/support/forum/p/android/thread?tid=7921c16b7b46096e&hl=en
Not sure exactly, but is this what you are looking for? http://cnn.cn/shop/google-nexus-digitizer-p-8252.html
Yea I tried that number and also that lunacommerce site is located in China, no prices on their website, no way to purchase anything other than contacting them first (which I have tried to no avail...). You would think some online store somewhere would have started selling spare refurbished parts. Whatever, guess I will have to pay HTC to fix it, kinda sucky.
If you find somewhere that can help you, please post back. I just had a similar experience, replaced the digitizer and the display wouldn't work afterwards. Figured I had damaged the AMOLED, so purchased another. Problem still persisted.
I've decided that I must have damaged the AMOLED connector on the logic board.
The upside is I can still use the phone when connected to a PC and using Android Screen Monitor.
So now I've ordered another Nexus One, I find it hard to get by without my daily Android.... it became an expensive drop of the phone.
Kman Gymrat said:
Not sure exactly, but is this what you are looking for? http://cnn.cn/shop/google-nexus-digitizer-p-8252.html
Click to expand...
Click to collapse
No that is what I replaced in the first place. I am looking for the Logic Board. I will keep searching and update this thread if I ever figure it out. Going on 3 days without a phone and only being able to use Google Voice via my computer is starting to drive me insane!
Hello
I recently dropped my Samsung Captivate. First time it had purple spots on the screen in 1 day the whole screen went purple and the next day the whole screen went black The sensor and everything else is working.
How do you think, what may be the issue of this? is the screen completely screwed or there may be another, less important damage.
Lejolasho said:
Hello
I recently dropped my Samsung Captivate. First time it had purple spots on the screen in 1 day the whole screen went purple and the next day the whole screen went black The sensor and everything else is working.
How do you think, what may be the issue of this? is the screen completely screwed or there may be another, less important damage.
Click to expand...
Click to collapse
My guess is that you'll have to replace the digitaliser. You can do it yourself or contact mobiletechvideos.com for the job.
If you have any experience in it though, you can try opening your phone and see if anything isn't correctly connected.
BWolf56 said:
My guess is that you'll have to replace the digitaliser. You can do it yourself or contact mobiletechvideos.com for the job.
If you have any experience in it though, you can try opening your phone and see if anything isn't correctly connected.
Click to expand...
Click to collapse
did you mean the whole lcd?
Pretty sure it would be easier to replace the digitizer + screen, since I think they're glued together on the captivate? (correct me if I'm wrong).
It's about $75. http://www.ebay.com/itm/Samsung-Cap...izer-i896-AT-T-Galaxy-S-Display-/160787040070
Lejolasho said:
did you mean the whole lcd?
Click to expand...
Click to collapse
x0ne215 said:
Pretty sure it would be easier to replace the digitizer + screen, since I think they're glued together on the captivate? (correct me if I'm wrong).
It's about $75. http://www.ebay.com/itm/Samsung-Cap...izer-i896-AT-T-Galaxy-S-Display-/160787040070
Click to expand...
Click to collapse
You would have to replace both, yes.
BWolf56 said:
You would have to replace both, yes.
Click to expand...
Click to collapse
At the cost of replace them both i can buy a captivate in better condition i did hope, that there could be another issue. thank you guys.
You can...? Please shoot me a link...haha .
x0ne215 said:
You can...? Please shoot me a link...haha .
Click to expand...
Click to collapse
Yeah, I'd like to grab a spare if they are sitting that cheap now.
Sent from my SGH-I897 using xda app-developers app
As far as I've seen, the cheapest I got mine was $80. Bad idea, too many issues, wasted money. Buying anywhere but swappa they're about 150$+. Swappa has one for $135 (hoping to buy that one actually, but either have to wait a week and hope someone doesn't buy it, or sell my pantech crossover faster so I have the money haha).
x0ne215 said:
As far as I've seen, the cheapest I got mine was $80. Bad idea, too many issues, wasted money. Buying anywhere but swappa they're about 150$+. Swappa has one for $135 (hoping to buy that one actually, but either have to wait a week and hope someone doesn't buy it, or sell my pantech crossover faster so I have the money haha).
Click to expand...
Click to collapse
You just have to put "i897" or similar as an ebay saved search that notifies you when new products matching that description are posted.
I bought 1 cappy for $60 from ebay seller alltechwholesale, out of Texas I think. In my experience, they do a good job inspecting the phones first so you know what your going to get. In my experience and many others, the phone arrived in better condition than described....Then I picked up two more sold together on ebay for $70 that were listed as one bad digitizer and the other bad charge port. I got them as parts phones. The one with the "bad digitizer" ended up being just a bad search button because the screen lifted on that corner a little. A 50 cent tube of adhesive fixed that. Then the second of the two just had a dirty charge port and a squirt of crc electronics cleaner fixed it...Now I have a main phone, a backup flashed to be identical, and a media device!!
After taking this phone completely apart a few times it gets pretty easy to see it really is a mini computer and most of the major parts can be bought on ebay for decent prices and replaced fairly easy....The ribbons that connect the various parts can bend and break easily so that is something to keep in mind. I broke the ribbon for the headphone jack assembly but a little hunting on ebay and I had one on it's way for $1.50 after shipping lol.
rmntruexjr said:
You just have to put "i897" or similar as an ebay saved search that notifies you when new products matching that description are posted.
I bought 1 cappy for $60 from ebay seller alltechwholesale, out of Texas I think. In my experience, they do a good job inspecting the phones first so you know what your going to get. In my experience and many others, the phone arrived in better condition than described....Then I picked up two more sold together on ebay for $70 that were listed as one bad digitizer and the other bad charge port. I got them as parts phones. The one with the "bad digitizer" ended up being just a bad search button because the screen lifted on that corner a little. A 50 cent tube of adhesive fixed that. Then the second of the two just had a dirty charge port and a squirt of crc electronics cleaner fixed it...Now I have a main phone, a backup flashed to be identical, and a media device!!
After taking this phone completely apart a few times it gets pretty easy to see it really is a mini computer and most of the major parts can be bought on ebay for decent prices and replaced fairly easy....The ribbons that connect the various parts can bend and break easily so that is something to keep in mind. I broke the ribbon for the headphone jack assembly but a little hunting on ebay and I had one on it's way for $1.50 after shipping lol.
Click to expand...
Click to collapse
Haha yes, I can relate to the mini computer aspect. Just spent my day repairing about 8 hp Touchsmarts, the cappy compared to that, is a dream lmao. Much less to deal with . I planned on using the cappy I have now as a spare part phone anyway, unless I can somehow get it to work. But I didn't know about the whole ebay thing. I shall do that now, thanks a TON :fingers-crossed:
EDIT: Just checked alltechwholesale ebay store, SO MANY CAPPYS FOR SALE!!! All around the same price, seems they put it up for 0.99 and someone keeps jacking it up to $70 shortly after. My only thing -- I hate auctions . But great share and bookmarked
x0ne215 said:
Haha yes, I can relate to the mini computer aspect. Just spent my day repairing about 8 hp Touchsmarts, the cappy compared to that, is a dream lmao. Much less to deal with . I planned on using the cappy I have now as a spare part phone anyway, unless I can somehow get it to work. But I didn't know about the whole ebay thing. I shall do that now, thanks a TON :fingers-crossed:
EDIT: Just checked alltechwholesale ebay store, SO MANY CAPPYS FOR SALE!!! All around the same price, seems they put it up for 0.99 and someone keeps jacking it up to $70 shortly after. My only thing -- I hate auctions . But great share and bookmarked
Click to expand...
Click to collapse
yeah, alltech is just auctions but I just took time to read conditions and saved a bunch and you'll find that they go for different prices depending on what's wrong and even depending on the day or time of day lol......That's why I suggested saving the search too. I use the ebay app and when there is new listings of my saved searches I get a notification so I go and look. If your quick, You can possibly snag a "buy it now" at a decent price depending on the condition your looking for. I really couldn't believe I ended up with 3 100% working phones and maybe I just got lucky, but I'd say it's worth a try lol.
I'd say it was a combination of good research, and amazing luck hahaha. But I do appreciate it a lot, thanks for the info, cheers
Lejolasho said:
At the cost of replace them both i can buy a captivate in better condition i did hope, that there could be another issue. thank you guys.
Click to expand...
Click to collapse
Sorry we kind of got off the subject, But for the digitizer try what Bwolf said about the connections.
Once when I was testing the power button I soldered on my old cappy I didn't get one of the ribbons all the way on (i believe it was the ribbon near the power button), and the screen flashed a few different colors.
There is at least one probably more youtube vids with pointers on how to get the cappy apart in a way that wont do damage.
I know there's a tare-down guide here, and there was a YouTube video where someone replaced the screen, if I can find it on my history I'll edit this post
rmntruexjr said:
Sorry we kind of got off the subject, But for the digitizer try what Bwolf said about the connections.
Once when I was testing the power button I soldered on my old cappy I didn't get one of the ribbons all the way on (i believe it was the ribbon near the power button), and the screen flashed a few different colors.
There is at least one probably more youtube vids with pointers on how to get the cappy apart in a way that wont do damage.
Click to expand...
Click to collapse
i have checked and now i am sure, that the screen is broken. I live in a state, that is not supported by paypal and and where can i buy used captivate for parts with my credit card?
The only place I can think of would be ebay, if you can find a seller who accepts things other than paypal. Or you can try craigslist.