Database Develop

Under (At) 30 Days, cracked screen

I was carrying a heavy box today against my body, I must have jammed a corner into my tilt, because afterwards the screen is all white with a black spot. I am pretty sure it is a cracked LCD.
1. Anyone have any advice on getting service through ATT? I heard they had a 30 day no questions asked policy. It is obviously a cracked screen, pretty sure they wouldn't deal with that.
2. It was paid for on a visa, do they have something I can take advantage of?
3. Where is a good/cheap place to buy the replacement parts? I am not too worried about digging in and fixing it myself.
4. What are my options for paying someone to fix it? HTC, ATT, or otherwise?
I really appreciate your help, I am terribly aggravated with myself for break it. Just trying to minimized the damage right now.

DBordello said:
I was carrying a heavy box today against my body, I must have jammed a corner into my tilt, because afterwards the screen is all white with a black spot. I am pretty sure it is a cracked LCD.
1. Anyone have any advice on getting service through ATT? I heard they had a 30 day no questions asked policy. It is obviously a cracked screen, pretty sure they wouldn't deal with that.
2. It was paid for on a visa, do they have something I can take advantage of?
3. Where is a good/cheap place to buy the replacement parts? I am not too worried about digging in and fixing it myself.
4. What are my options for paying someone to fix it? HTC, ATT, or otherwise?
I really appreciate your help, I am terribly aggravated with myself for break it. Just trying to minimized the damage right now.
Click to expand...
Click to collapse
1. They will charge you for breaking it.
2. No, you can only dispute a charge if they didn't hold up their end of the bargain, you broke the phone, its your problem now.
3. I dont know
4. I believe they will charge a lot, but still less than a whole new phone. See how much it costs and then also see how much you can get on eBay for your broken one and how much a new one will cost you.

Good luck, I had the same luck as well, wasnt even a week of having my tilt and it fell in a bunch of clothes and had a small crack the slowly did the same results of your screen, I had to go through hoops to get a replacement from AT&T, not my most favorite people to say the least.. :-\ Just got my replacement yesterday as the phone died Monday.

petard said:
1. They will charge you for breaking it.
2. No, you can only dispute a charge if they didn't hold up their end of the bargain, you broke the phone, its your problem now.
3. I dont know
4. I believe they will charge a lot, but still less than a whole new phone. See how much it costs and then also see how much you can get on eBay for your broken one and how much a new one will cost you.
Click to expand...
Click to collapse
Ya, they will charge you with either buying a refurb phone, let you get a junky replacement phone if you cant afford it, or 3, raise hell with 611, and in the local AT&T athorized store you bought it from.

I've seen a few replacement screens on ebay if you have the guts to take your phone apart you could try one of those.

petard said:
1. They will charge you for breaking it.
2. No, you can only dispute a charge if they didn't hold up their end of the bargain, you broke the phone, its your problem now.
3. I dont know
4. I believe they will charge a lot, but still less than a whole new phone. See how much it costs and then also see how much you can get on eBay for your broken one and how much a new one will cost you.
Click to expand...
Click to collapse
regarding 2, I heard that visa offers some sort of protection plan for items purchased with it. I wasn't planning on back charging it.
I was unable to find any screens on ebay, but I'll keep looking. I found a replacement service for $170.

Here is a link to a screen that i found on ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=270204138123&Category=41343

http://www.pocketpctechs.com/main~unit~ATT_Tilt-974~area~repairs~action~updateunit.htm
LCD and touchscreen replacement service.

A7LAS said:
Here is a link to a screen that i found on ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=270204138123&Category=41343
Click to expand...
Click to collapse
That doesn't look like too bad of an option. I need to read about what is involved to install it. I think i have seen some posts of people have issues even after replacing the screen (incompatability?).
Also, that is in Hong Kong, yuck. Perhaps I can find one that is in the US and includes the tools required.
Thanks for pointing me in the right direction though.

I just purchased this screen:
http://cgi.ebay.com/ws/eBayISAPI.dl...em=270204431330&_trksid=p3984.cTODAY.m238.lVI
Does anybody forsee any issues replacing it? I found directions online.

I actually changed my mind about repairing the screen myself after reading the directions. It seems risky that I'd break it myself.
1. Do you recommend I get a 3rd party to repair it? Pocket pc techs is an option ($170)
2. I called HTC today, they said screen replacement starts at $193. I am guessing that it is worth the extra $20 to have it done by HTC, perhaps it won't void the (rest) of the warranty?
-Dan

Broken AT&T Tilt Screen

As this is my first post I would just first like to say thank you to everyone who has contributed to this forum, without it this new smart phone user/AT&T subscriber wouldn't have been able to figure anything out.
Long story short: I just bought a new Tilt like three weeks ago and the LCD is already cracked. AT&T doesn't offer insurance on this phone and I am not entirely sure about HTC's manufacturers warranty. I checked across the forums and found some good information regarding replacing broken Tilt LCD screens, it all just seems fairly old. What I am wondering is what is the cheapest, easiest way to fix the LCD on the Tilt? Right now the cheapest I can find the LCD/Touchscreen combo with the right tools is $69.99 plus $12.99 S+H. Is this the best bet? Any other options I haven't thought of yet?
Also, I can't seem to find detailed picture instructions regarding the LCD swap anywhere on the forum? So where are the best directions for this online?
Now, time for a little rant. How the hell does AT&T not offer insurance for a phone that retails for over $300 brand new? Let's get serious here, it's an expensive piece of gadgetry that I happen to pay a lot of money for to use every month. The least they could offer their highest paying customers is a chance for insurance. By not offering insurance to their customers AT&T is basically saying "Piss off, oh, and make sure you pay your bill on time!" with a permanent smile on their face as they walk to the bank with our money. I'm sick of phone companies saying "I'm sorry, theres nothing I can do for you" to the customers that finance their paychecks, vacations, and replacement trophy wives boob jobs. I understand it's a service based industry and everyone wants their service, giving them the ultimate upper hand in the situation. But let's start thinking a little bit more with our heads and a little less with our wallets. It's time for these places to realize how ridiculous they are sometimes.
Apologize for the missive their, but man did it feel good.

l3urton32 said:
As this is my first post I would just first like to say thank you to everyone who has contributed to this forum, without it this new smart phone user/AT&T subscriber wouldn't have been able to figure anything out.
Long story short: I just bought a new Tilt like three weeks ago and the LCD is already cracked. AT&T doesn't offer insurance on this phone and I am not entirely sure about HTC's manufacturers warranty. I checked across the forums and found some good information regarding replacing broken Tilt LCD screens, it all just seems fairly old. What I am wondering is what is the cheapest, easiest way to fix the LCD on the Tilt? Right now the cheapest I can find the LCD/Touchscreen combo with the right tools is $69.99 plus $12.99 S+H. Is this the best bet? Any other options I haven't thought of yet?
Also, I can't seem to find detailed picture instructions regarding the LCD swap anywhere on the forum? So where are the best directions for this online?
Now, time for a little rant. How the hell does AT&T not offer insurance for a phone that retails for over $300 brand new? Let's get serious here, it's an expensive piece of gadgetry that I happen to pay a lot of money for to use every month. The least they could offer their highest paying customers is a chance for insurance. By not offering insurance to their customers AT&T is basically saying "Piss off, oh, and make sure you pay your bill on time!" with a permanent smile on their face as they walk to the bank with our money. I'm sick of phone companies saying "I'm sorry, theres nothing I can do for you" to the customers that finance their paychecks, vacations, and replacement trophy wives boob jobs. I understand it's a service based industry and everyone wants their service, giving them the ultimate upper hand in the situation. But let's start thinking a little bit more with our heads and a little less with our wallets. It's time for these places to realize how ridiculous they are sometimes.
Apologize for the missive their, but man did it feel good.
Click to expand...
Click to collapse
Mike Channon has links to Disassembly guides. Try a search for "Kaiser Disassembly Guide." My expert opinion, remember advise it worth waht you pay for it , is that the $70 is a good deal.
EDIT: I'm in a good mood. Searched for you today. Kaiser Disassembly Guides.
And s response to your rant. See this is why Mobile Phone Companies have the WORSE customer service rating of ANY business.

yea I cracked my screen as well about a month after having it.. I ended up buying a screen replacement for 115 off of ebay...
But now be careful... When i broke my screen, I thought that was the only damage the phone took... well the impact was right above where the sim tray is... and it damaged it as well.. my phone wasn't able to read sim cards anymore after replacing the screen... So I did a bold move, and told AT&T warranty support that my phone all of a sudden didnt read my card anymore.. i sent it back to them, and they sent me a replacement...
they could have charged me $400 for sending them a broken "out-of-warranty" item but i lucked out

l3urton32 said:
..How the hell does AT&T not offer insurance for a phone that retails for over $300 brand new? Let's get serious here, it's an expensive piece of gadgetry that I happen to pay a lot of money for to use every month...
Click to expand...
Click to collapse
That is exactly why they don't provide insurance for it. I asked a friend who works for them and he said that was the main reason. However if you live in dc metropolitan area there is a company called "Simply wireless" that offers insurance for any kind of mobile device and its 60 or 70 bucks upfront one time and insurance is good until something happens to device. Didn't get it myself but could be worth looking into.
p.s. i was also going to refer you to micheal but i Jimmy's already done it

Thanks to both of you already. Jimmy thanks for posting those directions, they look a little more intense than I thought but I don't think I'll have a problem replacing it myself. the $70 is way cheaper than the $170 from pocketpctechs.com
How would I make sure everything else is working fine on my phone? It's still syncing fine with my laptop and sends/receives calls, so I imagine its still fine. Is there a SIM access point through WMDC? Just to check that?
Also, anyone know any other ways to possibly get around this warranty here? The screen broke this morning, and I'm still not entirely sure how it happened. I had left my wall charger back home and only had my usb plug to charge my phone from. I woke up to the screen cracked and my phone being really really hot. The phone was at the foot of my bed, so I am not ruling anything out like me accidentally pushing in the screen, but has there ever been issues with the Kaiser's over heating and popping their LCD screen?

Thanks
Thanks to both of you already. Jimmy thanks for posting those directions, they look a little more intense than I thought but I don't think I'll have a problem replacing it myself. the $70 is way cheaper than the $170 from pocketpctechs.com
How would I make sure everything else is working fine on my phone? It's still syncing fine with my laptop and sends/receives calls, so I imagine its still fine. Is there a SIM access point through WMDC? Just to check that?
Also, anyone know any other ways to possibly get around this warranty here? The screen broke this morning, and I'm still not entirely sure how it happened. I had left my wall charger back home and only had my usb plug to charge my phone from. I woke up to the screen cracked and my phone being really really hot. The phone was at the foot of my bed, so I am not ruling anything out like me accidentally pushing in the screen, but has there ever been issues with the Kaiser's over heating and popping their LCD screen?

I used to work for Simply Wireless, and Mobile Solutions.. both a crooks.. dont buy from them, and definietly dont buy their insurance...
even though they are trying to clean their act up, their are 100% sales driven and dont give a f*ck bout their customer... trust me like i said, i worked for them...
if ur in the DC metro area, check out Wireless Jungle, they are located in Burke, Manassas, Herndon, and other parts of NoVA, they are excellent imo

l3urton32 said:
Thanks to both of you already. Jimmy thanks for posting those directions, they look a little more intense than I thought but I don't think I'll have a problem replacing it myself. the $70 is way cheaper than the $170 from pocketpctechs.com
How would I make sure everything else is working fine on my phone? It's still syncing fine with my laptop and sends/receives calls, so I imagine its still fine. Is there a SIM access point through WMDC? Just to check that?
Also, anyone know any other ways to possibly get around this warranty here? The screen broke this morning, and I'm still not entirely sure how it happened. I had left my wall charger back home and only had my usb plug to charge my phone from. I woke up to the screen cracked and my phone being really really hot. The phone was at the foot of my bed, so I am not ruling anything out like me accidentally pushing in the screen, but has there ever been issues with the Kaiser's over heating and popping their LCD screen?
Click to expand...
Click to collapse
honestly i doubt heat caused it... looking at my phone, i have enough room to stick my fingernail under the casing sourrounding the screen, so there is alittle room to move in case heat does expand the internals. My phone has gotten pretty damn hot before, to the point where i couldnt hold it (forgot it in the car with wifi bt and gps on... in 105F temp) and it was still fine....
I dont condone this... but when i broke my screen, i was extreemly careful in replacing it, and made sure not to add any additional scratches... once i was done, the phone looked like it did on day 1... so when i sent it back to AT&T there was no way they could tell it had been cracked open...
if ur phone still rings, and u can answer the calls, u should be ok...

I actually had the insurance prior to switching over to the tilt in October. In December my screen cracked and I called them and they said that since I was a long standing customer, they would replace it. they sent me a refurbished phone in 2 days.
I broke the scren again in February and this time I did not call immediately. about a month later I went past the store and told him the situation and he said to call again. I did and they sent me another one. they canceled my policy because I had two claims in one year. but they told me that I could pick it up again in a year.
Moral: always ask...you never know!

Awesome, more good info from everyone. I'm from the Rochester, NY area. Any idea if theres some sort of place that will insure any branded phones in my area? Google is failing me here. Also, do these places have to check your phone before they insure it? If theres some way I can get around that and put insurance on my phone I would just wait like a week and send it in...

yea if they "forget" to remove the insurance plan... or if u ask a stupid rep to add it, and they do... ur golden, and they will replace ur phone... I'm still grandfathered in with my insruance
btw kendall sent u a pm

so maybe AT&T is getting a little smarter. I called and got 4 different customer service reps and all of them told me it was ineligible...no luck with the bull**** approach. HTC USA said no go on everything too... I am getting a little fed up here. I have had this phone for only 3 weeks and everywhere I go everybody pretty much just dismisses me. My favorite dialog of the day came with one AT&T rep who was pissed off at more than just me trying to get an answer from her. And this is after she already told me the Tilt was ineligible for insurance
Me: So basically what your trying to say is that if I break my phone I'm pretty much screwed
AT&T Lady: umm... well. You can apply to get insurance on your phone and than you would be covered.
Me: you just told me I can't put insurance on my phone at all and you can't fix it for me
AT&T Lady: Wait. You can't put insurance on this? Hang on. (here she put me on hold to, what I assume at least, check her facts again) Alright Mr. Davis we can't insure your phone. Can I offer you a replacement Tilt at full retail price?
Let's get it it together AT&T, support the customers that pay your bills. We don't get the corporate discounts you get so it's a little ridiculous having to deal with all this crap.
Suggestion here...add an LCD Replacement walk-through to the Kaiser specific Wiki...or perhaps a whole section concerning DIY repairs and mods...Just something concise so it's a little easier to find. Thanks again to everyone though.

Lcd Screen
the cheapest i found was $65 for the lcd and $8 Shipping from. WWW.HTCLCD.COM comes with the tools to replace it.
Good instructions also on their website.

belize2004 said:
the cheapest i found was $65 for the lcd and $8 Shipping from. WWW.HTCLCD.COM comes with the tools to replace it.
Good instructions also on their website.
Click to expand...
Click to collapse
Thanks a lot! I'm ordering now and will see how it all works out.

I found a new place that will replace the screen with quick turnaround for $125
www.northbayelectronics.com
I am sending mine today!

well my screen cracked... anyone think of a reason this replacement screen won't work? I bought it just now, $14, no big deal if it isn't what I need... but can anyone see how this might not be what I need?
http://cgi.ebay.com/TOUCH-SCREEN-FO...NameZWD4VQQcmdZViewItemQQ_trksidZp1638Q2em124

that auction appears to just be for the touch screen overlay, not the LCD screen.

ericmcintire said:
well my screen cracked... anyone think of a reason this replacement screen won't work? I bought it just now, $14, no big deal if it isn't what I need... but can anyone see how this might not be what I need?
http://cgi.ebay.com/TOUCH-SCREEN-FO...NameZWD4VQQcmdZViewItemQQ_trksidZp1638Q2em124
Click to expand...
Click to collapse
I'm trying it. Please see:
http://forum.xda-developers.com/showthread.php?t=337102&page=10
and the page after. Should be interesting.

i ordered from htclcd.com (redirects to blackberry8100parts.com) on tuesday afternoon; i just received it from DHL. came in two separate boxes, one was the screen and tool, the other was another tool (different sizes). price was 68.80 including shipping from omaha, ne to knoxville, tn. regrettably i left the tilt at home so i can't do the replacement in the office today; i'll update when i've done the replacement (successfull or otherwise...) this evening or tomorrow morning. i'll try to remember to take some pics.

take off the four outer screws, and GENTLY GENTLY GENTLY pry the outer plastic bezel/frame off. you have to remove a philips head screw inside and to the left of the ear-peice speaker (as you look at the board from the back of the ear-peice (i.e. the inside of the bezel); i did not put this screw back on when re-assembling, i did pry the ear-piece connectors up a little to make sure they had enough stroke to make contact. you will need to remove GENTLY the adhesive that holds the sim-carrier to the back of the screen. once the parts are apart you can see the plug to remove the screen from the back of the button pad. reverse to reassemble. you do not have remove any peices from the main body or remove the screen from the main body IF you are only replacing the touch screen. i'll have my pics uploaded some time tomorrow. FYI, htclcd.com did not include the "plastic tool" that you are to use to pry the bezel off with but judicious use of a micro-driver and a guitar pick got the job done; for 20$US less than the competition and 2 day delivery, i am very happy with my purchase from them (htclcd.com = blackberry8100parts.com).
cheers all!

Broke Tilt in half

So one of my friends at work had an att tilt. However his son dropped it out of his pants pocket and the screen popped off. Screen is still in one piece however completly seperated from the tilt mechanism and the ribbon cable is missing. So I told him instead of throwing it away (cause att does not offer insurance) to give it to me and I'd see what I can do (Gonna unlock it and use it as an upgrade for my wing ).
I've read some of the hardware manuals and can already see I'll need parts to fix it. But I have no ideas what ones. Or if it's even worth it to fix. I mean its basically a free tilt minus any repair costs. Any help?

wshader said:
So one of my friends at work had an att tilt. However his son dropped it out of his pants pocket and the screen popped off. Screen is still in one piece however completly seperated from the tilt mechanism and the ribbon cable is missing. So I told him instead of throwing it away (cause att does not offer insurance) to give it to me and I'd see what I can do (Gonna unlock it and use it as an upgrade for my wing ).
I've read some of the hardware manuals and can already see I'll need parts to fix it. But I have no ideas what ones. Or if it's even worth it to fix. I mean its basically a free tilt minus any repair costs. Any help?
Click to expand...
Click to collapse
Check thi site, there is a manual how to dismantle kaiser. Could be helpful:
http://michael-channon.spaces.live....smantling+%2f+Disassembling+Guides+HTC%2fETEN

Thank you, however thats actually the repair manual I looked at. However while looking for parts I have yet to find the ribbon cable that connects to the display.
This is basically what I have except the ribbon cable is missing. And alot of steps missing to get it this way.

wshader said:
Thank you, however thats actually the repair manual I looked at. However while looking for parts I have yet to find the ribbon cable that connects to the display.
This is basically what I have except the ribbon cable is missing.
Click to expand...
Click to collapse
OMG, that had to hurt.

Yeah, kid was playing basketball and fell out of his pocket. I guess the kid has broke 4 phones this month... curve, tilt, 2 pantec duos. Told my friend to get him a $20 go-phone now lol. And use the savings to get me a tilt
I dont know what kind of damage besides the physical the drop may have caused. Phone was not on at the time so that may have helped it (I hope)

wshader said:
Yeah, and I dont know what kind of damage besides the physical the drop may have caused. Phone was not on at the time so that may have helped it (I hope)
Click to expand...
Click to collapse
I hope u repair it. Wish u luck.

Without actually looking at it, its hard to say what exactly you need. But you for sure need a new flex cable. Unfortunately that is the hardest part to find. At least here in the US. I usually buy broken phones from people who don't want to pay for a repair. Then I use the parts from them. You can get a new housing easily enough if you need it but the flex cable will be your biggest hurdle.
I suggest trying to find one broken on ebay and using the 2 you have to make one working phone. Even a broken Tilt can run for $200 on ebay though.

Anyone notice that case has already been replaced at some stage as it has a camera hole (not standard for Tilts) a keyboard without the white part and no logo. Perhaps the replacement was weaker than the original one. If the O/P searches the forum here for LCD Screen replacements there's loads of links to different companies supplying parts for Kaiser variants. I have no experience using any of them though so cant suggest which ones are best.

@Planet Neo
Yeah I was thinking that but was hoping it wouldn't come to that. Would suck to spend $200 for parts just to find the motherboard is broke or something to that effect. Was hoping someone knew of a place to buy a new cable or had one to sell. Also was hoping someone with some experience could let me know if they think I'd need a new tilt assembly.
@Flying Kiwi
Lol, I used a picture from kaiser disassembly guide to show what i was referring to. It has the standard tilt case. I'll be taking pictures of what I have as soon as I have the phone in my possession.

Okay I assume that its going to be very hard to get the ribbon and you're going to need housing. I believe that it will be the same as making a new tilt, because the screen is as good as dead without the ribbon so all you could do is get new housing and a new screen and it should rack up about $150-200. Which in my opinion is much easier and faster and better than frustrating on getting a ribbon.
Just my 2 cents.
Kraize

Planetneo said:
Without actually looking at it, its hard to say what exactly you need. But you for sure need a new flex cable. Unfortunately that is the hardest part to find. At least here in the US. I usually buy broken phones from people who don't want to pay for a repair. Then I use the parts from them. You can get a new housing easily enough if you need it but the flex cable will be your biggest hurdle.
Click to expand...
Click to collapse
I'm sure you'll think I'm busting your balls / stalking you but hard to find? Hell no! Expensive, maybe ( $100) but hard to find? I think not. Good job you're not charging people for you expert advice else they'd be wanting refunds....how long did you say you'd been doing this for?
http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=tytn+flex&category0=
You need a TYTN II flex. There are many other suppliers and if you go direct they may be a bit cheaper. google is your friend....
To check the board - connect to a windoze computer with a mini USB cable and power up or press the soft reset button to boot it - it should ident and install then try to sync. It should boot fine even with no LCD if it's OK assuming the battery still holds some charge.
A full housing will run you about $60. Some sellers have just front panels for about $40 though I'm unsure if these have the pivot.
M.S

Mysterious Stranger said:
I'm sure you'll think I'm busting your balls / stalking you but hard to find? Hell no! Expensive, maybe ( $100) but hard to find? I think not. Good job you're not charging people for you expert advice else they'd be wanting refunds....how long did you say you'd been doing this for?
http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=tytn+flex&category0=
You need a TYTN II flex. There are many other suppliers and if you go direct they may be a bit cheaper. google is your friend....
To check the board - connect to a windoze computer with a mini USB cable and power up or press the soft reset button to boot it - it should ident and install then try to sync. It should boot fine even with no LCD if it's OK assuming the battery still holds some charge.
A full housing will run you about $60. Some sellers have just front panels for about $40 though I'm unsure if these have the pivot.
M.S
Click to expand...
Click to collapse
Man, MS you really need to get off my nuts. It's getting creepy. I said in my post hard to find at least in the US. And the link you gave was for a seller in China. One more word of advice for the OP, Make sure this part actually works for the AT&T Tilt variant. I had a customer buy a Flex cable for the HTC Herald thinking it would work for the T-Mobile Wing but due to the modified button layout of the Wing it did not fit correctly. Much like this person HERE experienced.

Planetneo said:
Man, MS you really need to get off my nuts. It's getting creepy. I said in my post hard to find at least in the US. And the link you gave was for a seller in China. One more word of advice for the OP, Make sure this part actually works for the AT&T Tilt variant. I had a customer buy a Flex cable for the HTC Herald thinking it would work for the T-Mobile Wing but due to the modified button layout of the Wing it did not fit correctly. Much like this person HERE experienced.
Click to expand...
Click to collapse
These things are made in Shenzhen so where you think the parts come from?
Stop talking &*%(* and I'll stop correcting your posts Instead of saying something is a fact say it's your opinion. It's not a 'rare' part - and they ship WORLDWIDE. It's not as if he'll get one from a local mom and pop store - it's gonna be mail order wherever you get it from and looking at the seller's feedback is a good judge - all my parts come from China - so why pay a middleman such as yourself extra $ just so it has a US stamp on the package?
Someone needs to act as quality control on your posts and it looks like it's gonna have to be me if you keep posting [email protected]
M.S

Tilt motherboard!?!

Hey guys, have searched everywhere, both my boards are fried in my tilts... one my screen gets all weird colors after i wake it up from sleep... (fine after i reboot but once i sleep and come back on the color gets really funky) and the other the keyboard light is ON ALL the time, closed or open keyboard light is on all the time.... I have taken them both apart to no avail, im figuring the motherboards might have gotten a little fried while i was in the hottub and the steam got to them? Anyone know where to get them?

really?....
None knows where to get a motherboard or fix these problems?...

Did you ever find a source for a motherboard? I'm in need of one too...

www.ppctechs.com

jdwilson said:
www.ppctechs.com
Click to expand...
Click to collapse
I saw everything BUT motherboads. Did I miss something?
Thanks for the reply.

I'm in need of a board too because, of all things, my reset button broke. It appears that your best bet is to buy a broken screen phone or something similarly damaged but still functional.

anyone have any luck on this?

I just found this place on Google. But why pay $175 when you can get a Tilt on Ebay or Craigslist for that amount.

WillardZ said:
I just found this place on Google. But why pay $175 when you can get a Tilt on Ebay or Craigslist for that amount.
Click to expand...
Click to collapse
Nice find. But I agree, for the price, I would not pay that for just the Motherboard. I called them to see if they would sell the MB without labor, and they said no, they only offer parts with services. For less money, I will end up buying another Tilt on eBay and then have extra parts for future repairs.

I would try Craigslist first, you might find one close to you that you can see/hold before buying. Good luck.

Anybody think this prototype edition screen will work?

So I have had a Nexus 6 with a broken LCD sitting in a drawer for a while because screen prices (in addition to Motorola repair options) are much more than I would like, in addition to the phone running a custom ROM with an unlocked bootloader. So today I decided to look on ebay and screen prices are still pretty high, except this one.
http://www.ebay.com/itm/OEM-Motorol...sh=item3d1e0d1aaf:g:8dkAAOSw8RJXCR70#viTabs_0
Looks like this guy got his hands on one of those prototype LCD assemblies. I'm not sure who would part out and sell one of these but, here it is. I was wondering if this was worth a try or if I should just leave it dead in my drawer. The dude doesn't seem to know what he is selling but, mentions the ribbon cable is a bit short. If anyone can guide me on this, I would appreciate it.
EDIT: Meant to say Prototype rather than Developer, my apologies. If a mod wants to come through and fix the title, that would be great.
Thanks, TriguyRN

TriguyRN said:
So I have had a Nexus 6 with a broken LCD sitting in a drawer for a while because screen prices (in addition to Motorola repair options) are much more than I would like, in addition to the phone running a custom ROM with an unlocked bootloader. So today I decided to look on ebay and screen prices are still pretty high, except this one.
http://www.ebay.com/itm/OEM-Motorol...sh=item3d1e0d1aaf:g:8dkAAOSw8RJXCR70#viTabs_0
Looks like this guy got his hands on one of those prototype LCD assemblies. I'm not sure who would part out and sell one of these but, here it is. I was wondering if this was worth a try or if I should just leave it dead in my drawer. The dude doesn't seem to know what he is selling but, mentions the ribbon cable is a bit short. If anyone can guide me on this, I would appreciate it.
EDIT: Meant to say Prototype rather than Developer, my apologies. If a mod wants to come through and fix the title, that would be great.
Thanks, TriguyRN
Click to expand...
Click to collapse
Assuming you can do the repair yourself, I would just shell out the extra bit of cash to get a legit LCD. But, if you want to take the risk to save a buck, nothing is holding you back. It did say something about flex cables being different, in which case you would have a bit of trouble. Cheers!