Database Develop

WM6 Pocket IE - Issues - wsp:// vs. http://

Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER

FREIMAURER said:
Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
Click to expand...
Click to collapse
I can assure you that PIE in WM6 opens http:// addresses too. I haven't tried connecting through GPRS, though. Only WiFi.
Maybe it's a DNS problem?

Hi Risidoro,
which WM6 are you using? I use the PDAVIET3 and I had the same issue with
the PDAVIET1.
DNS sounds good but it worked on the previous roms and I use the same settings as before. Maybe there is some registry entry in the PDAVIET causing
this phenomena!?
Thanks for helping!

im using the Original WM6 rom and im not having 1 problem.. maybe is PDAVIET3 rom.. i have been using PIE on Wifi and GPRS and it always connects

I'm using the BigBrother's rom AKA clean wm6 and i've no problem so far. IE works as always...that is: BAD (but at least it opens http)!
The best browser for WM, the real usable one, is Picsel Browser.
It can't be bought online (picsel only sells it to device manufacturers) but... WM6 couldn't be bought too... if you know what i mean

I do use pdaviet3 and have no problem opening http pages with GPRS in IE.

risidoro said:
The best browser for WM, the real usable one, is Picsel Browser.
It can't be bought online (picsel only sells it to device manufacturers) but... WM6 couldn't be bought too... if you know what i mean
Click to expand...
Click to collapse
Well, I searched for it and found it, will try it, Thanks....

vijovame said:
Well, I searched for it and found it, will try it, Thanks....
Click to expand...
Click to collapse
Is a little weird, but is very good, just don't like how to zoom the pages, I use PIE plus in desktop mode....

Here check your registry and see if it looks anything like this. My browser was acting up and saying that invalid url. so i fixed the settings and now everything works awesome on it. heres the thread http://forum.xda-developers.com/showthread.php?t=291580 . its the last post

vijovame said:
Is a little weird, but is very good, just don't like how to zoom the pages, I use PIE plus in desktop mode....
Click to expand...
Click to collapse
Double clic and move the stylus up or down. It's all explained in the first page that's shown when you start the program.
bye

risidoro said:
Double clic and move the stylus up or down. It's all explained in the first page that's shown when you start the program.
bye
Click to expand...
Click to collapse
Thanks for the tip Risidoro! This really is a GREAT browser!

vijovame said:
Well, I searched for it and found it, will try it, Thanks....
Click to expand...
Click to collapse
any hints as to where to search for it? ive been searching for an hour now and no luck... it seems like a really cool program from all the stuff ive read though lol

FREIMAURER said:
Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
Click to expand...
Click to collapse
I think you have bad gprs connection settings, as you wrote you can only open through wsp:// it means you are connecting to WAP service where only connection to internet is through APN (Access Point Name) so you have to use wsp (wireless session protocol). I'm assuming you set up your connections using some cab file, don't you? Go to Settings/Connections/Connections/Manage existing connections and check how many connections you have there if it's only one than it's for shure connection through WAP APN and you have to change it to normal internet connection if there are more than one connections check the proper settings for internet instead 'auto pick' if any of this does't work make your own settings as I can see for German O2 you have to only put APN name 'internet' and nothing else no passwd or login. Hope this info helps you

deviusdragger said:
Here check your registry and see if it looks anything like this. My browser was acting up and saying that invalid url. so i fixed the settings and now everything works awesome on it. heres the thread http://forum.xda-developers.com/showthread.php?t=291580 . its the last post
Click to expand...
Click to collapse
Hi deviusdragger,
tried your help but to no avail. The PDAVIET 3 really has different settings but changing them and rebooting did not really fix the problem.
The keys you are mentioning are only under HKLM did you also change yours there or do you have them under HKCU as well?
Thanks a lot anyway for your help!

shamus said:
I think you have bad gprs connection settings, as you wrote you can only open through wsp:// it means you are connecting to WAP service where only connection to internet is through APN (Access Point Name) so you have to use wsp (wireless session protocol). I'm assuming you set up your connections using some cab file, don't you? Go to Settings/Connections/Connections/Manage existing connections and check how many connections you have there if it's only one than it's for shure connection through WAP APN and you have to change it to normal internet connection if there are more than one connections check the proper settings for internet instead 'auto pick' if any of this does't work make your own settings as I can see for German O2 you have to only put APN name 'internet' and nothing else no passwd or login. Hope this info helps you
Click to expand...
Click to collapse
Hi shamus,
thank you for your reply! No I do not use a cab I perform the settings manually. There is more to it than entering a APN, here is all I do and how
it is documented in the depths of the german O2 website
modem: CELLULAR LINE GPRS
APN: wap.viaginterkom.de
USER/PASSWORD/DOMAIN: empty
PROXY: 195.182.114.52
HTTP: 195.182.114.52:8080
WAP: 195.182.114.52:9201
SECURE WAP: 195.182.114.52:9203
SOCKS: empty
Only by entering these informations I am surfing on the O2 wap flatrate and
by entering the proxy like this I can surf to http sites as well!!!
And exactly this feature seems to have been taken from me
Well not really as I can enter wsp://... I am still able to surf but using
google and hitting search results gets really anoying cause for every search result I will have to change the url from http to wsp !!!!
So if somebody out there might really have the antidote for my prob I'd
be most happy and if not I´ll consider switching back to Farias rom as this
WM6 stuff is only for evaluation
Thanks for helping!

Hmmm seems it's good lead. When your connection is through proxy server in this case 195.182.114.52 then you have to have all connection setup in "my work network" disable "My ISP" in connections/advanced/select networks by choosing only "My work network" in both fields then setup Proxy server and setup only HTTP proxy remember 8080 port, left all other protocols empty (wap, socks, secure wap). Try if it works, if not than try to setup WAP proxy to 8080 port also. Since browser connects all the time to wap apn in this way you can trick it. Other unusual possibility is your provider stoped to serve http proxy or changed some settings.

shamus said:
Hmmm seems it's good lead. When your connection is through proxy server in this case 195.182.114.52 then you have to have all connection setup in "my work network" disable "My ISP" in connections/advanced/select networks by choosing only "My work network" in both fields then setup Proxy server and setup only HTTP proxy remember 8080 port, left all other protocols empty (wap, socks, secure wap). Try if it works, if not than try to setup WAP proxy to 8080 port also. Since browser connects all the time to wap apn in this way you can trick it. Other unusual possibility is your provider stoped to serve http proxy or changed some settings.
Click to expand...
Click to collapse
Hi shamus,
tried all of your ideas but still it did not resolve this issue! I always choose "My work network" because the ISP does not let me set up the proxy.
My provider still features this service because if I use any of the normal WM5 roms everything works perfectly!
Thanks for helping!
PS: this is really starting to pi** me off

FREIMAURER said:
Hi shamus,
tried all of your ideas but still it did not resolve this issue! I always choose "My work network" because the ISP does not let me set up the proxy.
My provider still features this service because if I use any of the normal WM5 roms everything works perfectly!
Thanks for helping!
PS: this is really starting to pi** me off
Click to expand...
Click to collapse
Hey FREIMAURER....we met in another thread......
I had a similar problem...you may have to flash your factory rom just to get your provider network settings. Flash back to your current rom and then use that cab file to set your device up so that your carrier's settings show up in Connections. At this point you can modify the wap address and your proxy settings. This will get you on the internet.
MMS is another beast!
PDAviet3 does not include MMS....you have to install ArcSoft MMS for it to show up on your device. I recommend you install ArcSoft MMS before you install your carrier's settings cab because your carrier settings include MMS configurations but once they are installed...you can not change them. If your MMS works, you're good. If it doesn't, un-install ArcSoft MMS, re-install ArcSoft MMS and manually input your settings.
Sounds like alot of hard work but it's not that bad.
PM me if you need help

Cingular settings
Cingular settings CAB files can be found here:
http://forum.xda-developers.com/showthread.php?t=292245
5th post down

What happened....did everyone give up..?!?!

Trying to get Vodaphone Live to work on HTC branded TytnII

Hi guys - need some help.
Been following the guide on how to get Vodaphone Live to work on the HTC branded TytnII.
Done the registry editor changes to it now appears to be an Nokia N95... but every time I try to copy the Browsers.dll file across to the windows directory I get a write permissions error.
Any ideas?
Cheers
Tony

Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.

kaiserchief said:
Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.
Click to expand...
Click to collapse
Thanks you're a Star... Resco explorer worked like a charm...

Vodaphone Live and HTC TytnII.
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'

nikosroy said:
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'
Click to expand...
Click to collapse
Hiya this is the guide I used:
http://www.modaco.com/Vodafone-Live-Settings-t259142.html

I tried the settings in the thread Wise1 gave but it didn't work. Has anyone got vodafone live to work on the TyTnII?

Use the cab in here...
It uses the same browser.dll and reg settings as mentioned in the guide, but only takes two seconds (and a soft reset).
Oh, and always remember that you have to connect to the internet via the *WAP* settings before you can get on to Vodafone Live! - you'll get an error if you're connected via the "Internet" settings.
Enjoy!

It Worked!!!!
Thanks Sub69 it worked. I had spent hours trying to get Mobile TV.
Just thought I'd add one note though for those people that download the cab and then expend the Internet browser to work.
Once you have installed the cab go to START, Settings, Connections, then click on Connections icon. Click on Advanced and Select Networks. On programs that automatically connect to the Internet, select Contract WAP from the dropdown menu.
Next goto Internet Exployer and type http://live.vodafone.net. It should then work.
p.s. turn off WiFi as this will stop internet streaming on vodafone live

Thank you for this...
This worked perfectly for me, although I had to enter wsp://live.vodafone.com before it loaded the vodafone live! homepage (http:// at the start didn't work).
Amazing isn't it how Vodafone happily sell Windows Mobile devices but don't support them with Vodafone live and Pocket IE!

Personally, I use: http://live.vodafone.co.uk but as long as it all works, that's the main thing!
And yes, you must be connected via the *WAP* settings otherwise you get a "service is not responding at this time" error.
Bit of a pain that - I've tried all sorts of fiddling with the exception list etc. and I just can't get it to switch connection settings automatically when navigating to the Vodafone pages.

app to devellop...
If a dev guys could write a little apps with two big button to switch to :
* Vodafone Live wap
* Defaut internet
it's would be nice if you can setup within the applic 2 network config something like:
Button1(I):
Internet connect with : ....
Work connect wit : ....
Button 2(WAP):
Internet connect with : ....
Work connect wit : ....
and an option to start PIE to another web page ... with button 2...

Still not working...even with the .cab
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.

The cause is just your tricks to use exception...! Don't try to use it, even if it connect right...do a manual connect you will see the difference

I got those sorts of error messages when I was trying to work out how to use the exception list too. Very long "loading" times, followed by IE timeout errors.
Should work fine if you set your connections so that the "Programs that automatically connect to the Internet" are using the "Contract WAP" settings...

Same here?!
Deepdivedog1 said:
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.
Click to expand...
Click to collapse
Same here?! Kaiser (Vario III) with Dutty´s Kaiser Final 2 (TouchFlo). Running fine.
What happened:
Try to establish internet connection. "wap.vodafone.de" (without Proxy)
- Vodafone Mail works fine (POP)
- IE (only http://www.vodafone.de) works fine
- Every other page (also wsp://live.vodafone.de) The page cannot be found. Check the name and try again.
Add Proxy 139.007.029.001 like it is written in some "Threads":
- Vodafone Mail --> did not work any longer. Sync error (Could not establish connection)
- No IE connection is possible.
Any idea?
Thanks. Bye.

Reversing the Vodafone cab file
Hi Sub69
I have been able to use Vodafone Live TV fine on my TyTn II for sometime but recently I wanted to look on a site that won't work as it said that my phone had been detected as a Symbian S60 unit and wanted me to download a .sis file which obviously won't work on the TyTn II. Have you got a cab file that does the reverse of the vodafone Live cab file and reverts the TyTn back to a WM6 device as far as some programs are concerned. I will then be able to toggle between the 2 as and when I need to.
Thanks

How to connect to internet using OPERATOR

I am from slovakia and I use O2 as my operator. How can I set up the internet that I can receive wheather information in soft like PointUI or touch commander.
What does it cost ?
Is it expensive to download these wheather data?
I am a complete noob in things about mobile internet. Never use it

Well it depends upon your service provider..give them a call or contact them asking for the Data charges
as for ur seconds requests..Install HTC Connection manager ( if u cant find it tell me)..and select your service provider settings ..soft reset and Enjoy Internet on ur Hima

is the problem solved?

Search for "Network wizard" cab file
I think "its right" post some where
Here it is in post no. 7
http://forum.xda-developers.com/showthread.php?t=324320

MDA Compact IV - O2 GPRS Internet

I have an unlocked T-mobile MDA Compact Iv (aka Touch Diamond) which is now on O2 with a web bolt on. I've configured it as per the instructions from O2 but I can not get the internet to work.
If I select IE, input a web address it says 'cannot connect'.
It does come set up with T-Mobile Web N Walk and when I go into connection settings it says T-Mobile Internet 'this connection is pre-configured and can not be modified' but it does allow me to add a new modem connection (which is what the O2 instructions say to do).
I'm guessing its trying to use the pre-configured T-mobile settings. How can I get it to use the new O2 connection I've just set up?

try this (see attached cab) it from my o2 ignito!
there is a cab on the forums somewhere ! i cant rememer the exact name its something like "setup operator" or "operator config" just do a search
oh yeah im assuming yopur in the uK with that cab

You may wish to look at the link in my signature if you're using the HSDPA (3G) connection from o2 UK.

idrisito said:
try this (see attached cab) it from my o2 ignito!
there is a cab on the forums somewhere ! i cant rememer the exact name its something like "setup operator" or "operator config" just do a search
oh yeah im assuming yopur in the uK with that cab
Click to expand...
Click to collapse
Thanks. Can I install that straight on to my phone. Its still running the original T-mobile themed ROM. Should I back anything up first or will it just install a new app (which app is it).
I've found this on the forum -
Advanced Configuration Tool 2.1.0.0 [cab, 396 KB]
http://htc-diamond.sosref.com/downlo...ol_2.1.0.0.cab
Was this the one you were refering to.

dont bother with that cab just tried it on mine ! installs but doesnt work
the other point, No im not refering to advance config! i wll try to look for it again! in the meantime may be some else can find it for you

Managed to get it working.
If you go into Settings-> Connections->Connections
It say 'T-Mobile Internet. This connection is pre-configured and can not be modified'. You then have 'My Work Network' which is were I added the O2 settings but this wasn't working.
If you click the Advanced Tab and then 'Select Networks' the first question is 'Programs that automatically connect to the internet should connect using -' and there is the choice of T-Mobile Internet (the default) and my Work Network. By changing this to 'My Work Network' it will pick up the O2 connection I have added under Work Network getting round the pre-configured T-Mobile settings.

prevent the diamond using 3g / gprs etc

hi, i remember reading a post on here about someone being able to make / prevent the htc diamond from using the WWW services whilst they are roaming.
however forum searches have not prevailed, can anybody help me find the necessary software or regestry edits needed to make this happen to my phone? im going away soon, and dont want to be raped by my mobile provider!
many thanks!

a google search found my answer! see below:
Originally Posted by docraj
you could go to settings->connections->connections->advanced->select networks and choose "my work network" for both internet and work. this will ensure that your device will not seek a connection for GPRS etc.
i think this may work.

You could've used search or google for this one. Search for MoDaco NoData, that's the program you need I guess.

i just deleted the GPRS settings
if you dont want to use GPRS than this works