The biggest problem I find in flashing ROMs is setting up my four email accounts, signatures etc. each time. Most other program installations I can cope with easily.
I'm sure these account details must be stored in an easily accessible registry key but I really can't figure out where.
Is there any easy way to backup these details (not the messages themselves, it's the settings I'm interested in) so that I can restore them easily when trying a new ROM?
golightlygl said:
The biggest problem I find in flashing ROMs is setting up my four email accounts, signatures etc. each time. Most other program installations I can cope with easily.
I'm sure these account details must be stored in an easily accessible registry key but I really can't figure out where.
Is there any easy way to backup these details (not the messages themselves, it's the settings I'm interested in) so that I can restore them easily when trying a new ROM?
Click to expand...
Click to collapse
Did you search? Did you try google?
Let me do that for ya
PIM Backup, SPB Backup, Sprite Backup, Resco Backup, Sashimi.......
SEARCH!!!!!!!!
Yes I did search. Yes I did google. I did research. and I am a responsible member of this community and respect a lot of what you and others (including myself) contribute to this forum.
I also read questions carefully before I reply. Had you done the same, you might have realised that the solutions you refer to do not do what I want. I am not interested in backing up the messages themselves but rather the settings of the accounts: servers, download schedules, logon names etc.
As you say:
Never ASSUME anything as it makes an ASS out of U and ME so perhaps you should be more careful before you flame. But thanks for taking the time to try and help.
golightlygl said:
Yes I did search. Yes I did google. I did research. and I am a responsible member of this community and respect a lot of what you and others (including myself) contribute to this forum.
I also read questions carefully before I reply. Had you done the same, you might have realised that the solutions you refer to do not do what I want. I am not interested in backing up the messages themselves but rather the settings of the accounts: servers, download schedules, logon names etc.
As you say:
Never ASSUME anything as it makes an ASS out of U and ME so perhaps you should be more careful before you flame. But thanks for taking the time to try and help.
Click to expand...
Click to collapse
Been one of those days were I seem to get constantly contacted by noobs or see posts by them all looking for basics. I'm always the first to admit it when I'm wrong, so my apologies.
In response to your query I also did a bit of searching, unfortunately with no solution.
Understandable - just didn't want you to confuse me with one of them! Thanks again for trying to help.
hello,
If your rom is UC compliant the following link might give you some tips.
http://forum.xda-developers.com/showpost.php?p=1897000&postcount=3
See [EMAIL2 CSPs] Part.
Sorry for not giving you a real solution...
frha said:
Sorry for not giving you a real solution...
Click to expand...
Click to collapse
thank you very mach, work great, nothing to sorry for, solution is real
sashimi has a tool included, which can backup your email accounts and your settings for wireless connections. its called makisu
the best is, to use sashimi together with makisu
so rom flashing becomes very easy after setting up the application
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
yes I'd also recommend sashimi +makisu (the latter is included in the sashimi package as well, but can also be downloded seperately). Makisu let you backup your email and wlan configurations in an xml file and restore it with a new flashed ROM. Sashimi supports many other config burdens after flashing: cab autoinstallation, registry settings, file operations and skripts. And it is working very accurate
PS ... but for signatures I havent seen anything in it... but will work, if the signature is file based or part of an ini-file (with sashimi)
dmode90 said:
thank you very mach, work great, nothing to sorry for, solution is real
Click to expand...
Click to collapse
It would be wonderfull, if you can elaborate more and give us a sort of How-To.
TIA
Try this...
After setting up your email accounts and before a sync, take a backup using Sprite (or what ever) but only backup your email settings. Then you can restore from this on your new ROM. I've been doing this but dont use signatures so not sure of that of that.
I've used SettingsSavior in the past. Works ok for 6.1 - bit flaky with 6.5.
It looks a bit like an abandoned project, but still works OK for email accounts and common registry settings. I don't have a link, just google and usually find it. (It's free)
Related
How safe are they?
will they brick my phone?
I'm looking for the nice looking dialer screen the one that covers the screen with nice numbers and cyan and black background.
Well as you see this is the first time im using a smartphone.
I think i will have to read a whole noobie guide explaining everything and not just the basics.
Thank you very much.
I'm loving the Tilt a lot.
cabs
cabs are installer files similar setup files on a pc (very overly simplified). most cabs can be successfully by going to settings-system-remove programs so you can try it out and remove it if you don't like it.
if you have the right installer/cab files for your particular device (ppc, smartphones don't have touch screens) you will not brick your device.
you will not brick your device if you first HardSPL (see sticky) and use the files Dutty has collected and has available.
READ THE WIKI FIRST - most general questions can be answered by reading it.
Harkadenn said:
How safe are they?
will they brick my phone?
I'm looking for the nice looking dialer screen the one that covers the screen with nice numbers and cyan and black background.
Well as you see this is the first time im using a smartphone.
I think i will have to read a whole noobie guide explaining everything and not just the basics.
Thank you very much.
I'm loving the Tilt a lot.
Click to expand...
Click to collapse
A partial answer to your questions:
Regarding cab files. In general anything you find here will be relatively safe. BUT things do occassionally go wrong and indeed some cabs can change settings and change the behaviour of other applications in a way you do not like. For this reason you should (I would say MUST) use a good full backup application. I use SPB Backup but you might prefer Sprite. If you do a full backup before installing Cabs then you can always restore the backup if things go wrong. (It's also good practice anyway in case of fatal crashes or corruption)
The Kaiser is a PPC not a Smartphone (It's better he said controversially). There are differences, and indeed when googling for cabs and programmes you should go for the PPC (ARM) versions not the Smartphone versions.
Regarding dialer skins - use the search button or go to the "Search XDA-Dev using Google" sticky post for other search possibilities.
Don't forget to read the Wiki - linked on the brown bar near the top of the screen.
Also don't forget that most apps and reg changes that apply to WM6 will apply well to the Kaiser. So if you search and find a WM6 cab or such on a forum for another device - it will likely be ok to install ok on your Kaiser. (But don't forget my backup suggestion above!)
Cheers
Mike
PS Welcome on-board, enjoy
EDIT: I see Apposite beat me to some of the above!!
Thanks very much.
Well a thing is I don;t know how to do backups.
I also tried downloading the colored kyeboard cab, but it didn't worked.
Anyways thanks again.
I'll be posting often
i always backup with spb backup,
it's quite good and i'm very satisfied.
I just started reading the Wiki
Fast question
What does flash do?
and from your last replay, Spb? backup
yes of course spb backup
No no I meant what is the SPB backup?
What it does/stand for, and how do i get it?
Messenger/AOL/Yahoo MSN
Every time I try to connect to any of this, It loads for a long times but never connects me.
Am I loosing something?
Harkadenn said:
No no I meant what is the SPB backup?
What it does/stand for, and how do i get it?
Click to expand...
Click to collapse
Hello,
Go to the Spb Software House website site. Just google it and then you will find Spb Backup. I am new to the pocket pc world myself but try not to get in a hurry and install all the cool stuff (cabs) on this website. Make sure you understand what these programs are before installing. I made that mistake and after HOURS of reading and installing... I had to do a hard reset.
For backups I use Sprite, but will probably one day use Spb Backup as I use three of there products and all are GREAT! While on their website check out Spb Pocket Plus... It's AWESOME, IMHO
Many thanks for the help.
Another battery thread...
I know i know... a millions of threads asking issues and stuff about the battery.
Believe me, I have been looking deep into this site for battery threads but non have helped me.
I just want to know what is the best solution for my battery to last more than a day?
This phone drains it way to fast.
Is there any battery that can last a lot longer for this phone so I can order?
Thanks...
Harkadenn said:
I know i know... a millions of threads asking issues and stuff about the battery.
Believe me, I have been looking deep into this site for battery threads but non have helped me.
I just want to know what is the best solution for my battery to last more than a day?
This phone drains it way to fast.
Is there any battery that can last a lot longer for this phone so I can order?
Thanks...
Click to expand...
Click to collapse
It made a huge difference for me when I installed the 10 button comm manager and turn off 3G during the day. I only turn it on when I'm using the web browser or downloading something. Battery now lasts 2x as long.
what the 10 Button manager does?
I already shut the 3g and wi-fi.
What is this cab called?
http://i12.tinypic.com/4zu14xe
Is the dialing screen the one im looking for.
Third Picture on the top from left to right.
Also where do i get it?
is it here?
http://www.cinetsystems.com/xda/index.php?path=Kaiser+Cab+Collections/
its the file i am attaching. reference this page: http://forum.xda-developers.com/showthread.php?t=311225&highlight=retouched
I think the dialer is what your looking for.
-McMex
YEAH! it worked! finally the dialer lol!
Thanks a lot!
Hey I have another question...
I already downloaded this http://forum.xda-developers.com/showthread.php?t=350700
But I'm afraid something happens to my Tilt, and I don't know how to run flashes and stuff.
I downloaded a backup SPB but dont know how to use it.
The main reason I downloaded that big rom is because I just read somewhere around this forums that it's the best bettery saver rom ever.
Help...
Im learning abit more, just downloaded the 10 com mannager and disabled the same as you did.
Hope this helps.
You need to CID unlock to put that rom on your tilt.
Why doesn't anybody cook this into roms? For that matter, why isn't this toggleable somewhere in Settings by default, huh Microsoft?!
Looks like someone didn't read the sticky...
[UPDATED] >> !! - ALL Important LINKS - !! < > !! Noobs and ALL read carefully !! <<
Before starting to post or even to modify your Device
read all carefully
VERY IMPORTANT - watch carefully
raduque said:
Why doesn't anybody cook this into roms? For that matter, why isn't this toggleable somewhere in Settings by default, huh Microsoft?!
Click to expand...
Click to collapse
As funny as dooby's reply was, oddly enough, some people do not like having the cabs stay on their device. It wastes space and is a bit annoying to navigate after reflashing a rom. With the advent of the UC capable roms, I would have to say that if you like keeping your cabs around, customize it into your setup. You can read about UC here and here.
phreke
dumpydooby said:
blah
Click to expand...
Click to collapse
You be quiet with that oversized waste of space post.
I was complaining about WM deleting cabs from my storage card. It doesn't bother me to delete them from the device itself. I still think it should be a toggleable setting at least to exclude the SD card.
Its actually kind of helps me to have the cabs delete themselves. I just keep a folder on my PC with all the cabs -- then when I put it on my Storage Card after a Hard Reset or New Rom, I can tell what is installed easy cuz the cabs disappear. I don't want them to stay on the phone. Just my preference.
raduque said:
You be quiet with that oversized waste of space post.
I was complaining about WM deleting cabs from my storage card. It doesn't bother me to delete them from the device itself. I still think it should be a toggleable setting at least to exclude the SD card.
Click to expand...
Click to collapse
I know what you were asking. I linked you to the video because "it is always better to reply than to start a new thread" and I think you should have made use of XDA's "best kept secret, the Search button."
The former would allow you to ask specific ROM makers why they don't include. The latter would have given you the answer you seek from the ROM makers themselves (since they've all been asked this question before).
You didn't actually think you were the first to ask this question, did you?
Nope, not that it matters. It was an open question to all, except smart asses like you. I wasn't asking rom makers specifically but everybody and their opinions.
I know how to Search, I do it all the time, except I don't have the time for it as I'm at work right now.
I thank you for wasting time ans space again, though, with a second 100% unhelpful post, my good sir.
Edit: I'm done here.
raduque said:
Nope, not that it matters. It was an open question to all, except smart asses like you. I wasn't asking rom makers specifically but everybody and their opinions.
I know how to Search, I do it all the time, except I don't have the time for it as I'm at work right now.
I thank you for wasting time ans space again, though, with a second 100% unhelpful post, my good sir.
Edit: I'm done here.
Click to expand...
Click to collapse
I for one did wanted to cook it into my past and current releases but never had any luck getting it to work. The only rom I've every used that had it working correctly was pdaviet roms. But I have spent some time with my up coming rom and was able to cook it into it. So my next release Open Touch v4.0 does have it included.
For me it has been a learning process working with the base rom itself and there are many things we want it to do but some times it just will not work the way we want it to.
Regards,
Well a read only cab file stays after installation. I assign all my cab files "read only" attributes, either from desktop PC before I put in on my phone, or use total commander to do that.
I didnt know this was a Debate just why it has access to remove the cabs from our memory cards. I myself hate cab delete because ive used a number of roms lately all of them Crash hard on me. I think i figured out what is going on but i work 12 hour shifts and if it freezes up and i have to hard reset at work i need to get the things i use most back up on the phone.
Try sprite backup...
After hard reset I can get back to the original state in minutes.
Backup folder
Just copy your cabs twice. Once to the phone for install, and once to your PIM backup folder. That way you'll always have a spare. You can copy those and reinstall your important apps anytime.
Hi All
In my contacts lists I have the windows contacts and the SIM contacts, all there to confuse me.
is there anyway i can only show the windows / outlook contacts when accessing the contacts on my phone ? I dont really want to delete the SIM contacts as I use them in another phone occasionally
Any ideas ?
Cheers
one idea for you, SEARCH
The answer is easy to find. You gotta work for your knowledge on this site.
waste of post instead of helping...i guess so is mine but i would help if i knew or not post at all..
well documented that setting must be cooked into a Rom. If you simply toggle the Registry Key it will reset itself!
Kaiser tweak setting does it for me when advanced cong did not work.
Cosmic Blue said:
Kaiser tweak setting does it for me when advanced cong did not work.
Click to expand...
Click to collapse
Reboot, many reports that it doesn't survive a soft reset/power-down & up.
kyphur said:
Reboot, many reports that it doesn't survive a soft reset/power-down & up.
Click to expand...
Click to collapse
It has worked for me when I have reboot numerious times, after flashing 3 different roms L26, Dutty's and others. Some of the programs I use require soft resets after installation. I usually have to got through at least 4 resets to get my programs and tweaks installed properly.
ChumleyEX said:
one idea for you, SEARCH
The answer is easy to find. You gotta work for your knowledge on this site.
Click to expand...
Click to collapse
Nice Answer and terribly helpful that.
I did infact try a search which brought little that would help other than a hundred or so posts containing the odd word.
Please stop having a go at those who want some seemingly simple help advice. If you know it GIVE IT.....
I use a range of different forums and all have been great to use with a wealth of information to help and guide us mortals out of a hole as well as offering info on how to make the best of things. These forums are backed up by some pretty knowledgeable folk. This is one of the best I've used.
However its also one of few forums where some of its members who deem themselves as gods regularly seem to want pound those who simply want some help.
I often read posts on here where people have asked a pretty simple question and got berrated for it. All they get as a response is '...SEARCH..SEARCH...SEARCH......SEARCH.... ' JUST HELP for godsake
C'mon man, theres soooo much info on here ,IT CAN BE hard to search for the right answer especially if the correct search terms or keywords arent being used, it can become frustrating for anyone seeking help and therefor easier just to create a new post. No ones fault just the sign of a great forum.
Please though....have patience and offer help. We're not all gods
Cheers
use the file under my attachment. it will hide ur sim contacts and it will survive soft resets/power down. This cab was posted under L26's V9 thread.
Christian87n said:
use the file under my attachment. it will hide ur sim contacts and it will survive soft resets/power down. This cab was posted under L26's V9 thread.
Click to expand...
Click to collapse
Cheers for that.
Works a treat !!
Steve
Glad you found it ssunstone. Some people in these forums can be really anal about giving out info and get off on telling them to search. Sometimes its valid but I see many times when it isnt.
I agree for new users to the site it can be incredibly confusing due to the shear volume of info and threads, added to this is the fear that doing something wrong may brick your expensive device its no wonder that people ask for conformation.
Hi there,
I'm fairly new to my Diamond but I love it a great deal.
There is one thing that disturbs me though and that is that I can't sort my phone book other than Name, which is "Last, First", and by Company (I don't bother about Company). I would like to be able to sort my contacts in First, Last Name order, I have a about 300 names in my list and it is really confusing when I don't find who I'm looking for anymore.
I would like to hear with you if there is a way to hack the register or any other solution for my issue.
And no, 3rd party application is not an option, sure, it would do the trick but I want to use and have easy access from the Contact tab.
All help appreciated.
Thanks!
there is a way, but it's not going to be fun, and you may want to do it on the computer in outlook instead.
Outlook on your PC and Windows mobile default to filing contacts as Last Name, First Name as you have found.
however, if you edit a contact, they both have a File as option. here you can select various different options, one of which being first name last name.
it's a bastard having to do it on all contacts, which is why you might want to do it on the computer instead.
hopefully, someone knows of a reg edit that'll fix it.
rhedgehog said:
there is a way, but it's not going to be fun, and you may want to do it on the computer in outlook instead.
Outlook on your PC and Windows mobile default to filing contacts as Last Name, First Name as you have found.
however, if you edit a contact, they both have a File as option. here you can select various different options, one of which being first name last name.
it's a bastard having to do it on all contacts, which is why you might want to do it on the computer instead.
hopefully, someone knows of a reg edit that'll fix it.
Click to expand...
Click to collapse
I developed an Outlook form a few years back that goes through all Contacts and sets the File As fields to First Name Last Name. Is this what you're after? I still have it but haven't used it in ages. Worked perfectly back then.
Feel free to try it (attached and I would recommend backing up your Outlook contacts in a PST first)
mkhattab said:
I developed an Outlook form a few years back that goes through all Contacts and sets the File As fields to First Name Last Name. Is this what you're after? I still have it but haven't used it in ages. Worked perfectly back then.
Feel free to try it (attached and I would recommend backing up your Outlook contacts in a PST first)
Click to expand...
Click to collapse
Thanks! This should prove helpful.
L o r d R a j said:
Thanks! This should prove helpful.
Click to expand...
Click to collapse
Please post some feedback if you try it as I''m curious to know
Thanks for the all input and quick replies.
mkhattab said:
I developed an Outlook form a few years back that goes through all Contacts and sets the File As fields to First Name Last Name. Is this what you're after? I still have it but haven't used it in ages. Worked perfectly back then.
Feel free to try it (attached and I would recommend backing up your Outlook contacts in a PST first)
Click to expand...
Click to collapse
I will definitely try your form and I really hope that it does the trick.
But I think there should be a register hack out there somewhere.
- Mikael -
In your contacts, on the Diamond, you have the option : "save as", but you've gotta do it manually for each one. Open a contact, tab the right soft-key (menu) choose edit, there you go
There is already an existing thread for this topic.
MrDerrickC said:
There is already an existing thread for this topic.
Click to expand...
Click to collapse
There is?
And I thought that I search the forum in every possible way!
Can you please provide me with a URL to the already started thread?
- Mikael -
m1kael said:
There is?
And I thought that I search the forum in every possible way!
Can you please provide me with a URL to the already started thread?
- Mikael -
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=269316
Search terms: outlook search first name
Try using the Google search of the site - it is very powerful
Hi there,
using a touch Diamond and some time ago went through a ROM upgrade and used Sprite Backup.
On the messagign screen I now have some phantom mail boxes on the right hand side. If you click on the envelope it will come up saying "no Messages". If you then click on inbox it will take you to the Select an Account screen (as the selected account doesn't actually exist)
If you go through to the Windows Mobile interface you can only see the current mailboxes which are configured.
I have looked into the option of creating a new backup and hard reset and restore without the mail and configure all over again but would like to avoid this as I have found in the past this leaves me with duplicate records (due to sycing with multiple machines).
I am looking to find where I need to go to remove the phantom mailboxes. Looking around I am assuming there must be some configuration files or registry elements for TouchFlo which tells it to display the folders.
Does anyone know where this information is to edit or delete? All ideas are welcome and encouraged.
Thanks in advance
ghost email
i have the same problem.Did you find the solution for this?Please post.
I have the exact same problem and it's quite anoying
i had the problem once too, and then I was advised to use the file i'm posting here. Copy to phone and run the .exe from phone.
I got it from another thread here on XDA-Devs, but don't remember who to credit.. Post if successful.
chribruu said:
i had the problem once too, and then I was advised to use the file i'm posting here. Copy to phone and run the .exe from phone.
I got it from another thread here on XDA-Devs, but don't remember who to credit.. Post if successful.
Click to expand...
Click to collapse
Thanks alot, this worked perfectly
Worked like a charm...
works a treat, thanks.
this is excellent. thank you very much.
Easy to use. Thanx!