Why doesn't anybody cook this into roms? For that matter, why isn't this toggleable somewhere in Settings by default, huh Microsoft?!
Looks like someone didn't read the sticky...
[UPDATED] >> !! - ALL Important LINKS - !! < > !! Noobs and ALL read carefully !! <<
Before starting to post or even to modify your Device
read all carefully
VERY IMPORTANT - watch carefully
raduque said:
Why doesn't anybody cook this into roms? For that matter, why isn't this toggleable somewhere in Settings by default, huh Microsoft?!
Click to expand...
Click to collapse
As funny as dooby's reply was, oddly enough, some people do not like having the cabs stay on their device. It wastes space and is a bit annoying to navigate after reflashing a rom. With the advent of the UC capable roms, I would have to say that if you like keeping your cabs around, customize it into your setup. You can read about UC here and here.
phreke
dumpydooby said:
blah
Click to expand...
Click to collapse
You be quiet with that oversized waste of space post.
I was complaining about WM deleting cabs from my storage card. It doesn't bother me to delete them from the device itself. I still think it should be a toggleable setting at least to exclude the SD card.
Its actually kind of helps me to have the cabs delete themselves. I just keep a folder on my PC with all the cabs -- then when I put it on my Storage Card after a Hard Reset or New Rom, I can tell what is installed easy cuz the cabs disappear. I don't want them to stay on the phone. Just my preference.
raduque said:
You be quiet with that oversized waste of space post.
I was complaining about WM deleting cabs from my storage card. It doesn't bother me to delete them from the device itself. I still think it should be a toggleable setting at least to exclude the SD card.
Click to expand...
Click to collapse
I know what you were asking. I linked you to the video because "it is always better to reply than to start a new thread" and I think you should have made use of XDA's "best kept secret, the Search button."
The former would allow you to ask specific ROM makers why they don't include. The latter would have given you the answer you seek from the ROM makers themselves (since they've all been asked this question before).
You didn't actually think you were the first to ask this question, did you?
Nope, not that it matters. It was an open question to all, except smart asses like you. I wasn't asking rom makers specifically but everybody and their opinions.
I know how to Search, I do it all the time, except I don't have the time for it as I'm at work right now.
I thank you for wasting time ans space again, though, with a second 100% unhelpful post, my good sir.
Edit: I'm done here.
raduque said:
Nope, not that it matters. It was an open question to all, except smart asses like you. I wasn't asking rom makers specifically but everybody and their opinions.
I know how to Search, I do it all the time, except I don't have the time for it as I'm at work right now.
I thank you for wasting time ans space again, though, with a second 100% unhelpful post, my good sir.
Edit: I'm done here.
Click to expand...
Click to collapse
I for one did wanted to cook it into my past and current releases but never had any luck getting it to work. The only rom I've every used that had it working correctly was pdaviet roms. But I have spent some time with my up coming rom and was able to cook it into it. So my next release Open Touch v4.0 does have it included.
For me it has been a learning process working with the base rom itself and there are many things we want it to do but some times it just will not work the way we want it to.
Regards,
Well a read only cab file stays after installation. I assign all my cab files "read only" attributes, either from desktop PC before I put in on my phone, or use total commander to do that.
I didnt know this was a Debate just why it has access to remove the cabs from our memory cards. I myself hate cab delete because ive used a number of roms lately all of them Crash hard on me. I think i figured out what is going on but i work 12 hour shifts and if it freezes up and i have to hard reset at work i need to get the things i use most back up on the phone.
Try sprite backup...
After hard reset I can get back to the original state in minutes.
Backup folder
Just copy your cabs twice. Once to the phone for install, and once to your PIM backup folder. That way you'll always have a spare. You can copy those and reinstall your important apps anytime.
Related
How safe are they?
will they brick my phone?
I'm looking for the nice looking dialer screen the one that covers the screen with nice numbers and cyan and black background.
Well as you see this is the first time im using a smartphone.
I think i will have to read a whole noobie guide explaining everything and not just the basics.
Thank you very much.
I'm loving the Tilt a lot.
cabs
cabs are installer files similar setup files on a pc (very overly simplified). most cabs can be successfully by going to settings-system-remove programs so you can try it out and remove it if you don't like it.
if you have the right installer/cab files for your particular device (ppc, smartphones don't have touch screens) you will not brick your device.
you will not brick your device if you first HardSPL (see sticky) and use the files Dutty has collected and has available.
READ THE WIKI FIRST - most general questions can be answered by reading it.
Harkadenn said:
How safe are they?
will they brick my phone?
I'm looking for the nice looking dialer screen the one that covers the screen with nice numbers and cyan and black background.
Well as you see this is the first time im using a smartphone.
I think i will have to read a whole noobie guide explaining everything and not just the basics.
Thank you very much.
I'm loving the Tilt a lot.
Click to expand...
Click to collapse
A partial answer to your questions:
Regarding cab files. In general anything you find here will be relatively safe. BUT things do occassionally go wrong and indeed some cabs can change settings and change the behaviour of other applications in a way you do not like. For this reason you should (I would say MUST) use a good full backup application. I use SPB Backup but you might prefer Sprite. If you do a full backup before installing Cabs then you can always restore the backup if things go wrong. (It's also good practice anyway in case of fatal crashes or corruption)
The Kaiser is a PPC not a Smartphone (It's better he said controversially). There are differences, and indeed when googling for cabs and programmes you should go for the PPC (ARM) versions not the Smartphone versions.
Regarding dialer skins - use the search button or go to the "Search XDA-Dev using Google" sticky post for other search possibilities.
Don't forget to read the Wiki - linked on the brown bar near the top of the screen.
Also don't forget that most apps and reg changes that apply to WM6 will apply well to the Kaiser. So if you search and find a WM6 cab or such on a forum for another device - it will likely be ok to install ok on your Kaiser. (But don't forget my backup suggestion above!)
Cheers
Mike
PS Welcome on-board, enjoy
EDIT: I see Apposite beat me to some of the above!!
Thanks very much.
Well a thing is I don;t know how to do backups.
I also tried downloading the colored kyeboard cab, but it didn't worked.
Anyways thanks again.
I'll be posting often
i always backup with spb backup,
it's quite good and i'm very satisfied.
I just started reading the Wiki
Fast question
What does flash do?
and from your last replay, Spb? backup
yes of course spb backup
No no I meant what is the SPB backup?
What it does/stand for, and how do i get it?
Messenger/AOL/Yahoo MSN
Every time I try to connect to any of this, It loads for a long times but never connects me.
Am I loosing something?
Harkadenn said:
No no I meant what is the SPB backup?
What it does/stand for, and how do i get it?
Click to expand...
Click to collapse
Hello,
Go to the Spb Software House website site. Just google it and then you will find Spb Backup. I am new to the pocket pc world myself but try not to get in a hurry and install all the cool stuff (cabs) on this website. Make sure you understand what these programs are before installing. I made that mistake and after HOURS of reading and installing... I had to do a hard reset.
For backups I use Sprite, but will probably one day use Spb Backup as I use three of there products and all are GREAT! While on their website check out Spb Pocket Plus... It's AWESOME, IMHO
Many thanks for the help.
Another battery thread...
I know i know... a millions of threads asking issues and stuff about the battery.
Believe me, I have been looking deep into this site for battery threads but non have helped me.
I just want to know what is the best solution for my battery to last more than a day?
This phone drains it way to fast.
Is there any battery that can last a lot longer for this phone so I can order?
Thanks...
Harkadenn said:
I know i know... a millions of threads asking issues and stuff about the battery.
Believe me, I have been looking deep into this site for battery threads but non have helped me.
I just want to know what is the best solution for my battery to last more than a day?
This phone drains it way to fast.
Is there any battery that can last a lot longer for this phone so I can order?
Thanks...
Click to expand...
Click to collapse
It made a huge difference for me when I installed the 10 button comm manager and turn off 3G during the day. I only turn it on when I'm using the web browser or downloading something. Battery now lasts 2x as long.
what the 10 Button manager does?
I already shut the 3g and wi-fi.
What is this cab called?
http://i12.tinypic.com/4zu14xe
Is the dialing screen the one im looking for.
Third Picture on the top from left to right.
Also where do i get it?
is it here?
http://www.cinetsystems.com/xda/index.php?path=Kaiser+Cab+Collections/
its the file i am attaching. reference this page: http://forum.xda-developers.com/showthread.php?t=311225&highlight=retouched
I think the dialer is what your looking for.
-McMex
YEAH! it worked! finally the dialer lol!
Thanks a lot!
Hey I have another question...
I already downloaded this http://forum.xda-developers.com/showthread.php?t=350700
But I'm afraid something happens to my Tilt, and I don't know how to run flashes and stuff.
I downloaded a backup SPB but dont know how to use it.
The main reason I downloaded that big rom is because I just read somewhere around this forums that it's the best bettery saver rom ever.
Help...
Im learning abit more, just downloaded the 10 com mannager and disabled the same as you did.
Hope this helps.
You need to CID unlock to put that rom on your tilt.
Hey y'all, I'd just thought I'd introduce myself to the Kaiser world seeing as I'm going to be spending a lot of time here. I'm a freshman at Notre Dame, and needed (..wanted) a smart phone to help me organize this mass of everything happening around me. Being the technology geek I am, I looked quite a bit into it and decided that the "Tilt" was far superior to my dad's heralded and suggested iPhone (plus I kinda loathe Apple. So eh. lol) Anyway, I received my Tilt as a gift last night, and realized that it came bloated with AT&T's crap and didn't look like the same home screen I saw on HTC's website. After spending more than a couple of hours here, I was successful in blindly following different instructions I found in at least 3 different threads to flash the Dutty's HTC ROM to my Kaiser, and I absolutely love it. Problem is though, I have no idea what hell is going on here. I don't know what a .RUU even is, and even though a .CAB was easy to figure out, I have no idea where to put them on phone. And before I get lambasted with the mantra of "use the searchbar" venerated by web forum's loyal users, I'd like to point out that if you take a step back, look at all of this info on here, and pretend you don't understand any of it, it's pretty damn hard to decipher this stuff. So if you guys know of any "Pocket PC New Users" guide written by knowledgable ppl on the web, and any XDA-Beginner guides or anything, please point them in my direction. I'm more than happy to read. However, reading 33 forum pages to figure out how to do 8 lines of instructions for one thing is extremely time consuming, cumbersome, and not that helpful. So again, it's nice to meet you all, and maybe y'all could help point me out in the right direction.
---Holy crap, that's a lot of text. Basically, hey y'all, nice to meet you, and do you think you could help out a newb who's able and willing to learn?
use the search bar!!!! hahahaha jk.....just read the wiki
As well as what's already been suggested, take time to read the manual and play around with the ppc. The importance of experiential learning can't be understated when it comes to these things. Unlike with full sized PCs, performing a hard reset to restore the ppc to an out of the box state is easy work.
So quick question. When I'm copying .CAB files or .EXE files onto my kaiser, where do I put them? I'm installing the iPhone app posted by Grumps, and I don't know where I should put it. Should I just make a file tree for every program I put on there under Program Files?
Hi, a .CAB file is just an executable installer. So best place it in the root of your storage card and delete it after installation of the app. During installation you will be asked where to install the app, PPC memory or storage card. Selecting the storage card will of course save memory, but for some reasons some apps don't work from storage card. You will have to try...
fightin4theirish said:
So quick question. When I'm copying .CAB files or .EXE files onto my kaiser, where do I put them? I'm installing the iPhone app posted by Grumps, and I don't know where I should put it. Should I just make a file tree for every program I put on there under Program Files?
Click to expand...
Click to collapse
I normally keep all my .cab files on my storage card so when I hard reset or re-flash I know where they are. Doesn't matter where you put them - I created a directory called (unoriginally) My Cabs. When you touch on them they will install to the necessary directory on the ppc, and can be uninstalled from the settings menu.
The .exe files could be a bit different. Some need to be installed from your pc - they will then install to the ppc next time you connect with activesync, and can be uninstalled in the same way as .cab files. Other .exe files can be stored anywhere on your ppc or storage card and will run each time you select them.
Heya. Let me be an opportunist and troll your thread to introduce myself here, too. hey all, homies n gyals, I'm Creiz, yes, it's my real name, pleased to meet y'all.
As for your quick question, If you use windows XP with dotNet framework 2, you can use this niifty utility called CabViaAciveSync to directly install your .cab files from the PC.
Right click the .cab => CabViaActiveSync.
Magic.
;P i´m noob too if you dont mine i'll use this thread to intruduce me too hehe and make a question. if i put a new rom my guarantee expires? and is good to change the default rom? what do you "kaiserians" think is the best rom for kaiser and how it works, if i make hard-reset the default rom appears? sorry but im really a noob in pocket things...
well i'm ricardo o/
fightin4theirish said:
Hey y'all, I'd just thought I'd introduce myself to the Kaiser world seeing as I'm going to be spending a lot of time here. I'm a freshman at Notre Dame, and needed (..wanted) a smart phone to help me organize this mass of everything happening around me. Being the technology geek I am, I looked quite a bit into it and decided that the "Tilt" was far superior to my dad's heralded and suggested iPhone (plus I kinda loathe Apple. So eh. lol) Anyway, I received my Tilt as a gift last night, and realized that it came bloated with AT&T's crap and didn't look like the same home screen I saw on HTC's website. After spending more than a couple of hours here, I was successful in blindly following different instructions I found in at least 3 different threads to flash the Dutty's HTC ROM to my Kaiser, and I absolutely love it. Problem is though, I have no idea what hell is going on here. I don't know what a .RUU even is, and even though a .CAB was easy to figure out, I have no idea where to put them on phone. And before I get lambasted with the mantra of "use the searchbar" venerated by web forum's loyal users, I'd like to point out that if you take a step back, look at all of this info on here, and pretend you don't understand any of it, it's pretty damn hard to decipher this stuff. So if you guys know of any "Pocket PC New Users" guide written by knowledgable ppl on the web, and any XDA-Beginner guides or anything, please point them in my direction. I'm more than happy to read. However, reading 33 forum pages to figure out how to do 8 lines of instructions for one thing is extremely time consuming, cumbersome, and not that helpful. So again, it's nice to meet you all, and maybe y'all could help point me out in the right direction.
---Holy crap, that's a lot of text. Basically, hey y'all, nice to meet you, and do you think you could help out a newb who's able and willing to learn?
Click to expand...
Click to collapse
Hi:
I am really a newbie too, only had the Tilt for 2 weeks now. But, I have read hundreds of threads here already, so I'm learning. My suggestion to you is, be sure to install Kaiser Tweaks, it is a great app, which will make it very easy to perform certain registry edits on your phone. The most important of which being, it enables you, with one click to enable hsdpa (faster than 3G internet). For some insane reason AT&T has this disabled on the Tilt. Although, maybe with your new ROM on there you may not need it. I am still using the AT&T ROM, so I'm not sure which features are or aren't on Dutty's ROM.
Anyway, just keep reading, it's amazing how much there is to learn here
My suggestions for best apps for the Tilt are:
Kaiser Tweaks (one click reg edits for many useful items)
SPB Pocket Plus (today screen interface, which looks cool, and is so useful for quick access to programs, files etc.)
All SPB products are pretty cool, and there are several to choose from depending on your needs
S2U2 (slide to unlock program, very useful, although the Tilt seems locked when in suspend mode, it really isn't)
PS: You're right alot of people do just tell you to go search, but believe it or not, there are MANY people here, who are willing to help a newbie, and understand that sometimes searches don't give us the answers we need. I have received tons of help from very nice people here.
Reason For this thread:
New easy to find Quick alternative for NEWBIES wanting to know ho to obtain a safe fast responding Tilt without messing the Device.
I THINK AT&T SCREWEDUP this beautifull piece of TECH with the Bloatware and not including HTC custom add on.
Have to say my Tilt was ok out of the box BUT NOW IS WAY BETTER.
Now I'm not expert (I'm more of a newbie) but theese is something I did and is really True and it WORKED.
I kindly ASK
***** Only people with FACTS/EXPERIENCE will POST HERE what they think is not HERE***********
****** NEWBIES with NO EXPERIENCE or with NO FACTS DO NOT POST HERE just READ, so we can keep it clean for all people without knowledge and no time to read QUESTIONS******
What to do:
Just:
1. Hard Reset
2. Soft Reset before the count down of 3 secs end.
So the AT&T SLOWING BLOATWARE (Crap Software from AT&T like Stupid DEMOS and Tricky Charging services, etc.) are not installed.
All this BLOATWARE make your Tilt SLOW.
Bennefits:
1. Faster Respponse "Overall" and I mean "Overall"
2. The so mentioned Slow DIALER, is no more SLOW, now it respond FASTER.
And let me tell you that I have over 300 contacts in my Tilt.
3. Way more free space for you to install direct to the device all Plugins and tools You Want.
4. When accessing WINDOWS folder, is FASTER.
5. Notice Faster Camera auto focus Shoot.
ETC, ETC, ETC, ETC, ETC.................................
Now I know there are some people who post already discussed topics.
How do I know this? BECAUSE I READ ABOUT IT ABOUT 100's of time about it.
And Because I read and someone should put toguether some specific threads (already saw some of them). And is very hard for me to read a thread that is maybe 80% guessing, I don't know, maybe, I heard of, etc, etc, etc.
I did this for all those people that DON't have time to go thru a Thread with over 50 posts mostly of craps and finding the answer somere in the post # 41.
NOW FOR YOU THAT HAVE A LOT OF EXPERIENCE and PLEASE!!!! no "GUESSING" Tell us about additional beneffits, or what important APPS are missing once You REJECT the BLOATWARE if any by replying to this POST and using the Title:
Title: Beneffits
or
Title: Missing
Thanks!!! to all of you.
Thank you for your effort. I didn't know fo all the benefits from rebooting at the 3-second count, I am to used to the custom ROM's, but this is great guide for those who want to stick with the AT&T ROM.
Its already been talked out many times here and on the ATT forums. Its even been added in the Tilt Specific WiKi already at the bottom and shows the difference an whats installed before and after the bloatware removal:
http://wiki.xda-developers.com/index.php?pagename=TiltSpecificWikiPage
But basically the
Benefit: It removes all the trial ware that you'd probably never buy and frees up space.
Missing: Still not as good as a custom rom that has all the performance tweaks to speed up the device (although the newest official ROM is close). If you know what your doing most of these can be fixed afterwards like the registry tweaks. But if your going to go through all that trouble you might as well just cook your own ROM or find one thats set up to your liking.
True
PsyOpWarlord said:
Its already been talked out many times here and on the ATT forums. Its even been added in the Tilt Specific WiKi already at the bottom and shows the difference an whats installed before and after the bloatware removal:
http://wiki.xda-developers.com/index.php?pagename=TiltSpecificWikiPage
But basically the
Benefit: It removes all the trial ware that you'd probably never buy and frees up space.
Missing: Still not as good as a custom rom that has all the performance tweaks to speed up the device (although the newest official ROM is close). If you know what your doing most of these can be fixed afterwards like the registry tweaks. But if your going to go through all that trouble you might as well just cook your own ROM or find one thats set up to your liking.
Click to expand...
Click to collapse
But the Problem is that some like to play safe, and I think those are the people without time to read long threads because all the questions.
Then after alot of time reading (again long confusing threads) when you think you found what you where looking for, somewhere appears a known problem you don't want to have.
In my case for example wouldn't like to lose Basic Dialer Alternatives and still confused if it will aslo remove those options if I install any of the dialers or if it will create conflicts and so on, like ohhh!!!!! I install some app and now I'm having problems with something, and then GUESS WHAT, somtimes people end up HARD RESETTING.
Another thing is for example pop up messages that are shown in a specific color that match your theme, then you install something, and BAM POP UP MESSAGES WITH PINK COLORS and so on.
My intention was to make an easy to find info for newbies. Believe me I have read but not alot of time to play, and try to go thru previous POSTS but no response.
Now I put this new threads and for the replies I recived I think I had better results than by going thru old post and actualy thanks for the replies I know that probably people will read this and now will be directed to the wikki.
Like I will do, just Hopping it is complete and accurate info.
Thanks for replies.
I just updated my rom to
RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe
I'm trying to remove the bloatware BUT it reinstalls it everytime. Is there something in the new ROM that prevents me from removing it or is there something new I need to do.
I had no problems removing it from the previous ROM. Thanks
JerryG said:
I just updated my rom to
RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe
I'm trying to remove the bloatware BUT it reinstalls it everytime. Is there something in the new ROM that prevents me from removing it or is there something new I need to do.
I had no problems removing it from the previous ROM. Thanks
Click to expand...
Click to collapse
You must do the soft reset before the 3 second countdown.
From what I know of the trick to soft reset worked only with WM6 ROMS, not with the newer WM6.1 ones.
soft reset works with WM6.1
I am one of the "play it safe" guys and the soft reset does work with WM6.1, you just have to catch it BEFORE the customize 3 second countdown even appears. I have used registry tweaks and jacked up my phone plenty, resulting in hard resets and each time i catch it before the countdown. if you miss it, just soft reset and start over again.
Newbs Unite!
Its really not that hard to flash a custom rom, besides you think your device is fast now? Well flash a rom.
kilrah said:
From what I know of the trick to soft reset worked only with WM6 ROMS, not with the newer WM6.1 ones.
Click to expand...
Click to collapse
I'll second that. I've tried soft resetting at every imaginable point after the restore and every time it just resets and goes right back into the customization garbage.
**After reading Stu's post I'm going to try it one more time. I'll post my results.**
Yessir..it does work. Thanks Stu!
this works on dutty's rom even while it shows the countdown...
Hi everyone! I recently bought a T-mo Wing on ebay and as it's my first pda phone I did exactly the same every newbie does: I've messed things up.
The first problem was that I started to download and install every app I thought I would use. Soon realized that IN FACT I would use 10% of all that ans started uninstalling things. Till there, I was good, but then I found pocket mechanic pro and its "registry tweaker & cleanup" killed my voice command and made the phone loop forever on bootup unless I remove the memory card. Besides, I have memory shortage problems and lots of things I will never use like myFaves, t-zones, tons of icons and silly images .... So my questions are ....Is there any T-mo "official" ROM with all the T-mo stuff removed?? I don't have problems with the rest of the apps and bricking the phone is not an option: I'm latin american!! used wing was really a financial effort for me!! The second question would be: Is there any way to restore the registry keys that pocket mechanic erased?? I know the answers might have been already posted but I've been browsing the forums for about 6 hours with no success ..... Can anyone help me on this??
Thanks
Wow.... really long
alvarete62 said:
Hi everyone! I recently bought a T-mo Wing on ebay and as it's my first pda phone I did exactly the same every newbie does: I've messed things up.
The first problem was that I started to download and install every app I thought I would use. Soon realized that IN FACT I would use 10% of all that ans started uninstalling things. Till there, I was good, but then I found pocket mechanic pro and its "registry tweaker & cleanup" killed my voice command and made the phone loop forever on bootup unless I remove the memory card. Besides, I have memory shortage problems and lots of things I will never use like myFaves, t-zones, tons of icons and silly images .... So my questions are ....Is there any T-mo "official" ROM with all the T-mo stuff removed?? I don't have problems with the rest of the apps and bricking the phone is not an option: I'm latin american!! used wing was really a financial effort for me!! The second question would be: Is there any way to restore the registry keys that pocket mechanic erased?? I know the answers might have been already posted but I've been browsing the forums for about 6 hours with no success ..... Can anyone help me on this??
Thanks
Wow.... really long
Click to expand...
Click to collapse
The easiest way to go back is to do a hard reset. (Hold the two softkeys and press the soft reset key.) As far as "official" ROM, there isn't, but there are a lot of third party ROMs. If you hardSPL your phone (which runs the slight risk of bricking your phone) then you brick-PROOF your phone.
Wow!! I can't believe you ...I mean YOU, took som time to answer my post!! I read lots of stuff here made by you. Thanks man! I'm really honored.
The thing is that if I hard reset my wing all the T-mo stuff will be there again, and some of it is non removable. There are lots of pictures and icons that I won't ever use. What if I take the latest T-mo ROM and delete all that without modifying anything else?? I mean, no t-zones, no my faves and no TONS of avatar pictures.... would that be possible?? Again, thanks for answering
alvarete62 said:
Wow!! I can't believe you ...I mean YOU, took som time to answer my post!! I read lots of stuff here made by you. Thanks man! I'm really honored.
The thing is that if I hard reset my wing all the T-mo stuff will be there again, and some of it is non removable. There are lots of pictures and icons that I won't ever use. What if I take the latest T-mo ROM and delete all that without modifying anything else?? I mean, no t-zones, no my faves and no TONS of avatar pictures.... would that be possible?? Again, thanks for answering
Click to expand...
Click to collapse
lol. Thanks for thinking so highly of me.
It's possible, you have to dump the ROM and then recook it, though.
You could also wait for my SuperJustKitchen and build your own custom ROM. ^_^ But either way, you HAVE to HardSPL. There are no ROMs that can be flashed with the stock SPL other than the stock one.
That's exactly what I'm going to do!! I'll wait for your SuperJustKitchen and remove all unneeded stuff from the latest official T-mo Rom. In the meantime, I will try to recover my voice command without hard resetting just for fun. I really don't need it because my spoken english is horrible and by the time it worked, almost never recognized what I said . Anyway, it really annoys me that a supposed registry cleanup made by pocket mechanic messed up the system that way. The Wizcode forum has a solution that actually works just for the full version of MVC. Nor upgrade nor OEM are fixed by that "patch". I would like to know if there's any way to decompile it and make the corrections manually. It's supposed to restore some deleted registry keys but I couldn't find wich ones ....Would that be possible??
If it's a cab, it can turned into a OEM/EXT package which lets you see the registry keys by themselves.
Sorry for the delay....
Hi again! It was not a .CAB .... It was a [email protected] .exe file. Tried to open with winRAR and 7zip but with no success. Finally i found the dump of the .reg file that voice command uses. I was not able to import it (there are some path errors and I know NOTHING about reg scripting), so i had to write all the keys and values manually. It worked!!!! After a soft reset voice command was there! After that I disabled it because my english sucks and VC could not understand what i said ..... but still works!! Still waiting for your kitchen to make a new ROM for my wing .... Thanks again for taking the time to answer me ...
I don't know well, but...
Maybe you can have good luck in hard-resetting and do not enter into customization, but soft-resetting.
Another way is going into Extended ROM and analizing the .cab files there, and erasing some of them (better if you save them into another place).
Please wait till someone "better than me" will confirm those data I told.
On the other way, if you don't like T-Mo ROMs the best you can do is Hard-SPL and flashing a new radio+ROM. You by yourself realized Ivan has good ROM's. And the one I'm using now is also good.
OK, my first post so be gentle.
I have MDA Vario that has been flashed with TPCElite series V11 MEGA wm6.5 23017. It also has the touchflo GUI running. Now having tried it for a week (only just purchased it a week ago) I can say that I'm not a fan of the touchflo prog. It seems to hang on occasions and I often end up selecting something I didn't want only to find the phone connecting to the net. So I have switched it off. There is a windows default one that is working fine, but I can't see a way to customise the menu so I can add what I want to it.
So my dilemma. Do I flash with a "lite" rom and add a GUI myself afterwards - this way I can uninstall it if I don't like it. Or should I just leave it deselected and install a new one? Will this have any performance/memory issues - ie is the lite rom a better way to go.
I had a Mio PDA with iLauncher on it and I liked the ability to add my own shortcuts etc.
If I should flash can anyone recommend a stable reliable rom. Also is there a better GUI? Been looking at Manila 2D v2 but I want to be able to customise the main menu and I don't want it sluggish.
One final thing. Is it possible to get the phone to ask permission before connecting via gprs rather than scurrying around for the disconnect. I've looked through the menus but can't find anything. Don't mind using it if I want it, just fed up of it dialing it by mistake -(I have sausage fingers.)
i recommend the t.i.r element v5 rom. ive been thru many roms including the tpc series that you have tried and i find that t.i.r element v5 is the best w/ smooth graphics, great gui (full landscape support etc.) i cant post a link as of now since i am new to posting on xda so please look it up and give it a shot!
Is there a CLI version of a rom for this phone or is someone just trying too sound fancy? Since when is touchflu a GUI? I am totally confused.
Do I flash with a "lite" rom and add a GUI myself afterwards
Click to expand...
Click to collapse
Uh my head is hurting make it stop.. SOMEONE REPLIED TO THIS?? awmg
If I should flash can anyone recommend a stable reliable rom. Also is there a better GUI
Click to expand...
Click to collapse
I am so confused, it's like trying to mess with a womans bra (Full Landscape support) for the first time, what do I do.. do I call her new hair doo a pair of panties? AAAHHHHHHHH
Stylez close this **** down.. REASON.... Doesn't make any sense at all..
I used the GUI version of this forum to reply.. Thanks.
hi DTBrum,
touchflo - i never liked it too, don't know which files are responsible for its running and if it could be removed, seems like it's part of needed htc drivers to me, but this will switch it off completely:
[HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings]
"EnableScroll"=dword:00000000
"EnableCube"=dword:00000000
you need a registry editor to change those values.
===
you can't replace gui, or you can theoretically but what you mean is sort of launcher, or today manager. I tried more and didn't like any, they all seems to be laggy to me.
windows in default uses today screen and start menu, it's the same way as in pc edition, there are folders with shortcuts in them for start menu
look in \windows\start menu folder. and on today screen, you can set what you want to see there in settings/today
I use start replacement called quickmenu which is a very small prg with lots of tweaks.
if you don't like those fancy launchers and controls, better you make your own rom. it's very easy with tools from xda. nearly all custom roms lite or full you'll find here have some kind of launchers and today replacement already in them and it's hard to remove or disable them.
there is a lot of different apps like iLauncher, you can install/uninstall.
no one will recommend you any custom rom here, you need to go through trying one after another because everybody's preferences differs. look in wiki.
automatic connect. no, there is no way to disable this. you can use app called 'nodata' but then you'll have to run it to enable/disable every time you want to use internet. But it solves problems in roaming.
Some programs can be set to not auto dial. and another option is, you can set a fake internet connection, make it default and then when you want to go online you'll dial the real one manually. But you may find that some programs would not want to use other then default connection.
and don't get discouraged here on forum, some people are smart here, true, but not all of us here get born that way.
Thankx for the replies.
What I found with touchflo was that there are occasions where I try to scroll from left to right and nothing happens, then all of a sudden I find it has selected something like maps or internet and the phone is trying to connect to the net. Then it starts responding normally. So as a front end user interface for me I'm not that keen on it. Also I can't see a way to remove the categories sucj as maps, and add my own. I have a registry editor and will try changing the values suggested and see if that helps. I'll do a search for the other bits recommended.
Apologies ChumleyEX, not sure if I used the correct terminology. For me a program such as touchflo is an alternative GUI that sits on top of the windows GUI. Just want to know if there are better, more reliable ones. Doesn't have to be fancy. I want to be able to customise it and for it to be quick and responsive.
Sorry I'm sure I was too harsh, I was feeling a little too good last night.
No problem ChumleyEX - no harm done.
Papo - thanks for you time and help, you cleared a few things up for me. Registry edited and touchflo now disabled.
As I said I've only had this device a week and only just found this site recently, so I'm not really up on the terminology so I'm hoping you can look past my shortcomings please. I'll get there. I'm no novice with pc's or pda's but I'm not in the same league as most people on here I admit.
My question about installing an alternative to touchflo was because some of these other programs such as ilauncher like to be installed to the device memory rather than storage card. I don't want to find I start running low on resources so I was contemplating flashing the phone with a wm6.5 lite version with all the MS bloatware removed and adding a launcher/today screen manager afterwards. At least this way if I don't like a particular one I could un-install that. I have no option to remove touchflo.
I was hoping that by describing what I was after people would recommend something that fits the bill. But for now I keep looking at the roms and reading the comments until I find one I like the look of. There is some really nice work here on this site - so tempted to give it a go. I guess we all like different things so it's a matter of personal choice really. Key for me is functionality/responsiveness. It's no good if the interface gets in the way no matter how good it looks.
Off to read some reviews of roms on here now. I'll check out t.i.r element v5 as suggested by agent1001 first.
dude, stop fretting and just try out as many ROMs as you can...and remember to search and read a LOT! it will help in the long run to build your concepts.
i have TWO more suggestions/clarifications for you:
1. you might have big fingers, but what i suspect is that you are using your device as if it has a capacitive screen...which it doesn't. the kaiser (like many htc phones) has a resistive screen. essentially, what this means is that the screen will respond best with a good amount of pressure, applied at a point. so the best suggestion i can give you that will tremendously improve your experience with the device is...use your finger NAILS! the effect is as if you are using a stylus and once you get used to it, any "GUI" will become usable.
2. what you call a "GUI" is not a GUI, technically. this is what chumleyex was alluding to. these "GUIs" run as today screen plugins. they are just that...they are "today screen plugins"...also called "home screen" in other contexts of discussion. you can have many such plugins installed on your device. you can even have many such plugins running at once on your today screen. however, some take over the today screen completely, so you can only use them exclusively. manila2d/manila3d, spb mobile shell, and quite a few others are such kinds of today screen plugins. installing multiple such plugins only takes up storage space. RUNNING multiple such plugins is like running many applications at once...which will consume memory and may slow down the phone, etc, etc.
as always, you should have read the forum rules...which clearly state that "best of" threads or "suggest me a <insert requirement here>" style threads are against the forum rules. which leads me to believe that you probably haven't read the other "stickies" and "wikis" either. start there and then you'll find yourself asking a lot less basic questions that clutter up the forum. don't be surprised if this thread is closed soon by a forum mod. cheers.
Thanks ASCIIker - screen is more responsive with more pressure. Guess I was worried about cracking it.
I did do loads of reading before posting - mainly to do with how to, hard spl, soft spl, roms, radio threads. Sorry if I missed the bit about asking for recommendations.
DTBrum said:
I don't want to find I start running low on resources so I was contemplating flashing the phone with a wm6.5 lite version with all the MS bloatware removed and adding a launcher/today screen manager afterwards. At least this way if I don't like a particular one I could un-install that.
Click to expand...
Click to collapse
I get the feeling that you think those fancy things in full custom ROMs are taking up space. they are not. and not using them, disabling them, or deleting shortcuts from start menu would do the same as uninstalling.
you've got:
flash memory - (ROM)
int. memory - think about it as HDD: depends, typicaly little over 100MB
RAM, operating memory, like on PC another 100MB: to be used by progs.
those names differs, to add confusion, some refers to int.memory as ROM
MS bloatware & fancy stuff from custom ROMs which you don't want could still rest in peace in ROM and not bothering you. you'll still have your 100MB int.mem. And as long as they are not actively running you still will have 100 RAM and no processor power used. but exactly like mentioned every plugin on today screen means it's running too. get an fdc task manager or alternative to see all processes and other stuff running. (not just tasks) You can find a way to disable nearly everything.
I have no option to remove touchflo.
Click to expand...
Click to collapse
I don't think there is any. even with ultra lite, i could be mistaken with this, but i tried hard and it looks like it's part of required htc drivers. so you only could disable it...at least! i hated it too no matter about fingers. it seems better on htc pro2 anyway.
But for now I keep looking at the roms and reading the comments until I find one I like the look of.
Click to expand...
Click to collapse
yep, the look would be the main difference i'll say.
but if you want functionality/responsiveness, than you probably better stick with using start button and today screen without unnecessary additions.
* installing on SD card means it will go much slower and (at least on my kaiser) will sometime create errors on card from crashed apps and when I dropped phone or it died w/o shutdown or when contacts on SD card get loosed. many times I even lost complete SD contents.
You have 100MB of int.mem!! it would love to be used by progs.
I suggest you to try all of available and up-to-date custom ROMs then after getting an idea of what is doing what, just mix your own rom. it's a matter of check-in what you want inside basically. and you can add your own stuff too. like programs you buy or are not in any ROM. I have over 110MB of programs fitted in ROM and still 100MB int.mem. and speed of the device and ram is not affected too, because i let only 3 - 4 apps from that running in background.
Well I've tried flashing it and had to visit the toilet as things didn't go well.
I flashed with a lite rom, plan being to leave enough free space on the device to install a nice front end/today screen/touchflo etc to the device when I settled on one I liked.
Rom flashed fine - quite like it.
Radio didn't go well. Got stuck at the dreaded tri coloured screen.
Mtty.exe didn't recover it either.
Visited toilet.
Flashed back to standard rom from manufacturer. All now back up and running.
Have changed underpants.
At least I was able to use the info on here to get it back up and running OK.
Problem was a write error flashing the suggested radio - at 99% got an error 226.
DTBrum said:
plan being to leave enough free space on the device to install
Click to expand...
Click to collapse
check my previous post.
try flashing from SD card, a lot of troubles with cable/pc/connector
format small (256MB) SD card with FAT32,
rename ruu_signed.nbh file to KAISIMG.NBH place on root of SD
hold camera button and start or reset pda
I think to be honest I'm a little paranoid about keeping the device memory free. The reason is my wife has an O2 Orbit which was running wm5. It has been updated to WM6 and she has very little free storage memory at all on the device to the point where we have struggled getting some programs installed. I know most give you the option to install to storage card or device, but some don't. Also the ones that do install on the storage card often put some files onto the device, such as help or configuration files.
I know this HTC has a lot more memory so it probably isn't an issue in reality.
I'm up to speed about the different types of memory and whether an app is consuming processing power or just storage space depending upon if it running or not. I just didn't have a chance to read your reply before I posted- wife wanted the PC back. And I was relieved just to have the phone back working.
Papo - thanks for you help. Really appreciate it.
I had my tilt for 2 years and never worried about memory.
OK, flashed the phone a couple of times yesterday and I've now found a rom I like a lot. Even the GUI - touchflo - works like a dream and with the programs that came with the rom I can even customise it how I like. It's smooth, quick and I am yet to discover a bug.
I'll give it a run for a couple of weeks and if I decide to keep this then I'll donate.
Interestingly I flashed back to stock rom from T Mobile through links I found on here. Worked without a problem, provided a 6ft+ 16stone bloke is happy with everything in pink. So I then flashed back to the standard HTC rom wm6.1 and had lots of problems. Basic things like selecting tick boxes didn't even work well.
I understand that everyone wants different things from their phones, how they look etc and that is why it is impossible to say which rom is best. But through this site, I have a customised phone that runs so smooth and quickly and looks damn smart. So at the moment I am well chuffed.
The only really difficulty I encountered was I lost all my contacts. Activesync wouldn't restore them and the backup I took was incomplete as I only backed up the sim and not the phone. D'oh. Anyway I've now sorted this out as I found all the old contacts in outlook deleted items. I restored them back to the contacts folder and synced them again and it's all now back up and running.
Off to have a play
If she lets me I may even flash the wifes O2 Orbit XDA. It's been upgraded from wm5 to wm6 and the new rom leaves very little free memory on the device itself and we do struggle at times getting some software onto it. The version of TomTom I have doesn't let you choose where to install it to, it just goes onto the device. I have manually moved it back to the SD card and made new shortcuts etc, but I feel a new rom from this site would be the way to go.
Thank you to all who helped me.
DTBrum said:
difficulty I encountered was I lost all my contacts. Activesync wouldn't restore them
Click to expand...
Click to collapse
activeSync & outlook played tricks on me too, deleting or doubling all contacts... even easier than backing up by backup program, is to copy 'RAW' database in pda before re-flashing. it's all in one file called PIM.VOL in root of phone. calendar is there as well. you can copy this to SD and upon reflashing copy back to root of pda and see what PC's outlook will have to say to it. or just keep on SD as 2nd backup.
note, the file may be locked by running programs (contacts, messages, home plugin) kill them from taskman in that case.
The version of TomTom I have doesn't let you choose where to install it to, it just goes onto the device.
Click to expand...
Click to collapse
tomtom app is two files tomtom nav.exe and data.chk, put them anywhere you like and the rest, config files, will be created by it.
but it runs really slow from SD. and taking 13MB, so again, it's best to have them in ROM.