i tried to unlock kais130 with KaiserUnlocker it overite boot
then when second step selected it was stuck
then i tried other app for unlock
kaiser-simunlocker it contains three folders
it has almost same methord when it was overiting boot it was stuck at 85 %
when i re-starten kaiser it was permenently on boot
i tried mtt boot command it was on normal mode
but still when turn off and then back on it stucks on boot
i cant even unlock it
it stucks on 0%
please help me .
Related
I flashed my HTC 3600 over a weekago but all then for no reason my phone will only go to the splash screen displaying the HTC logo.
I have tried to reflash but the reflash gets to 1% before failing with corrupt rom message on the pc and the phone rebooting to the htc logo again..
has anyone go any ideas..
Thanks Steve
Try a hard reset.
tried a hard reset but the phone only goes to the splash screen
Try booting into bootloader, the key combination is on the Wiki. From there you can flash all again.
sorry for being an idoit but i dont understand i have the bootlader screen up,
but the flash refuses at 1% what is wiki?
http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets
Bootloader mode: Hold side Camera and POWER buttons together and reset with stylus.
Thanks for that i have tried this and it bring the bootloader up fine then when i flash it says corrupt rom, with all the roms not just one,
someone says i can reflash using mtty?
Hi guys,
Just as a preamble, I have read and attempted the stickied tutorials regarding HardSPL and Flashing ROM. During each attempt I have encountered problems.
When trying to HardSPL, using the standard method, I was not able to successfully complete the update. The phone would go as far as the progress bar, and just stop and sit there at 0%. I left the phone for over 20 minutes without any indication of success. The HardSPL program will go to a fail and ask me to step-by-step restart the process.
I was, however, able to successfully up date the phone by using HardSPL, and booting the phone with the Vol- & Power pressed down. Now, when I boot the phone, the Vol- & Power method shows
Code:
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
If I use the HardSPL to enter the bootloader, it shows
Code:
KOVS110 MFG
SPL-0.52.0liNex
MicroP1-787
MicroP2-707
I found this odd. In the system information shows that the phone was updated to R3A011, it was R3A010.
Anyways, now when I go to flash the ROM, using the SD method, it goes as far as the grey loading screen, and sits there and does nothing. I've tried multiple different ROMs, thinking the ROM was the problem, but nothing changes.
I just tried HardSPL again, and now it says there is an update to 1.9.0, should I do it the same way I did above, or no? What is wrong here? Why don't roms load in the bootloader?
Thanks in advance.
Adam
Hard-SPL is not applyed to your phone
If it does not want to work with the standard method, try this one:
-stop your phone
-Vol Down + start buttons to start the phone in tricolor mode
-connect USB cable from your PC
-run X1_HardSPL.exe
-follow the instructions
after the ruu files ..
the device does not turn the screen remains black after the logo of a solution
Could you explain a bit more what you did ?
If you tried to unlock your bootloader, normaly you should just restart your nexus one at the end of the process.
Gyz mine phone (moto g2) got bricked
I was flashing official Lollipop using mfastboot method
Suddenly
When I was flashing
Sparsechunk.0
It failed
I re tried but nothing happened
Then I disconnected that USB cable
Nothing happening... Phone got stuck on boot loader mode... I am trying to force reboot (continuously pressing power button) nothing happens
Tried holding power and volume down for 1 minutes nothing happened...
Please guys help me out.. I will try black flash.bat but it's needs phone off
I will also try to opening boot loader mode but how will I turn my phone off... It us stuck on boot loader menu.... I am also using volume Down and up button on boot loader menu....Nothing happens..
Plz suggest me what to do ??*?* plzzz
AmanNawaz said:
Gyz mine phone (moto g2) got bricked
I was flashing official Lollipop using mfastboot method
Suddenly
When I was flashing
Sparsechunk.0
It failed
I re tried but nothing happened
Then I disconnected that USB cable
Nothing happening... Phone got stuck on boot loader mode... I am trying to force reboot (continuously pressing power button) nothing happens
Tried holding power and volume down for 1 minutes nothing happened...
Please guys help me out.. I will try black flash.bat but it's needs phone off
I will also try to opening boot loader mode but how will I turn my phone off... It us stuck on boot loader menu.... I am also using volume Down and up button on boot loader menu....Nothing happens..
Plz suggest me what to do ??*?* plzzz
Click to expand...
Click to collapse
if holding the power button for a period LONG he does not turn off ( TRY VERY VERY VERY )
You'll have to open the phone and remove the battery ... and put off again
Well it's simple .
Just need the right key and a tutorial on the Internet
************************ tries fastboot reboot command ...
Fastboot reboot :good:
The phone has 0% charge and not charging( when i connect to charger it show battery logo and stays at 0 ),
i have changed boot logo in order to get rid of boot loader unlocked warning, now i want to give it to service center is there any way to change the logo to stock?
cant flash anything via fastboot coz of low battery, if i enter twrp the phone automatically reboots and shows bootlogo only please help..........