Database Develop

New ROM released - ROM: 1.34.251.1 Radio: 1.38.00.10

Available at least in www.myqtek.se and www.myqtek.fi.
Changes: Updated client for streaming media. New radio version.
Although I cannot get upgrade to start properly, always gives me error 262 at 0%.

Thanks for the update! I've downloaded and will flash the new software in the morning (I want to charge the battery a bit first).
I hope radio is more stable with this software - I've been to Denmark and the UK this week and in both countries call were broken and the phone lost connection with the mobile network (No service and Searching). Same problem that I've had before, even though I have tried changing the sim card. If it wasn't for these problems it would be a great smartphone, but now I find it to be a very crappy phone. Let's see if that changes now!

what's the AKU of the new ROM?

Finally got the update to work, had to do it according to these instructions: http://forum.xda-developers.com/showpost.php?p=1050547&postcount=6.
OS version is now: 5.1.465 (Build 15673.3.3.1), BUT radio is 1.29.00.10 and not 1.38.00.10 as it says on the ROM package. Can someone confirm this? As I had the 1.32 IU Test version installed previously and although I went first back to 1.30 I didn't check what the Radio version was so I don't know if 1.29 radio is something that was left from the 1.32 version or if 1.34 just has the same radio as 1.32.
1.32 was pretty promising version and I hope this one will be even better. I've had no major issues with these newer versions, although just a few days ago the phone ate the battery from 100% to about 15% in two hours when I was in a movie theater and the phone was not supposed to be doing anything!

I too have problems upgrading - I get error 262 at the beginning of the flashing. When I restart the MTeoR it starts WM as usual, so it seems it hasn't started flashing yet. This happens on two different computers. Any suggestions, please?
Note: I am able to flash 1.30.251.1 with any of the above computers. Only the new 1.34 is a problem. Could the install program be faulty? If so, it is pretty bad considering it is an official release.

New Rom
Hi,
Can you put it on rapidshare of megaupload ???
cor

http://rapidshare.com/files/22706498/852727-mteor_upgrade_2.zip.html

New Rom
Thanks for putting it on rapidshare.
I found the problem about the 262 error.
Just use a older update program with the new
rom file and everything is OK.

What language include new rom?

I didn't know how to do that , but after having checked a number of threads etc this is what I did:
1. Extracted the files in the exe file RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP using WinRAR.
2. Did the same with RUU_BREE100_1.30.251.1_1.16.00.10_HTCEUR_Ship
3. Removed the nbh file from the 1.30 directory and replaced it with the file from the 1.34 directory.
4. Ran ROMUpgradeUt.exe
It all worked, and I have now upgraded the Rom. Thanks!
jpalo: radio is 1.38.00.10, just as the file name says.

My radio didn't update first time either.
I found I had to use the 1.30 installer and it would only update the second attempt when it was already in the bootloader.
I then used the 1.34 updater and it then updated the radio.

Well I just updated mine and Yippeeee!!!!! Finally I have the EDGE "E" at the top. 'Bout freakin' time. My radio does still say 1.29 but I have noticed that before the update my phone was only on 2 bars, now it's steady on 4. Browsing seems to be much quicker now as well. Time to start reloading and testing.

Try updating with the 1.34 .exe and .nbh once you have managed to get to 1.34 the first time (ie just run the updater direct as you should normally)
My OS is 5.1.465 (Build 15673.3.3.1)
Radio Version is 1.38.00.10
So I guess that would make it AKU 3.3.1
No problems with it so far and have unlocked it to import the Vodafone settings as I would before, now to restart my mission to actually be able to load the UK Vodafone wap sites.

Dl also, and will try it out.

Electronic Punk said:
Try updating with the 1.34 .exe and .nbh once you have managed to get to 1.34 the first time (ie just run the updater direct as you should normally)
My OS is 5.1.465 (Build 15673.3.3.1)
Radio Version is 1.38.00.10
So I guess that would make it AKU 3.3.1
No problems with it so far and have unlocked it to import the Vodafone settings as I would before, now to restart my mission to actually be able to load the UK Vodafone wap sites.
Click to expand...
Click to collapse
Do you mean you "application" unlocked it? When I tried the old tired and true way of running SDA Unlock tool it tells me it can't be unlocked. I also can't make any registry edits, it won't save my changes and gives an error. What did you use to unlock it? Thx.

I ran the registry editor (same as before), made three registry changes.
Rebooted, ran the unlocker (which is now allowed)
Rebooted again and ran the unlock tool and said my phone was unlocked.
The steps I followed are here:
http://www.modaco.com/Mteor-application-unlock-solution-t244205.html

staffann said:
...I've been to Denmark and the UK this week and in both countries call were broken and the phone lost connection with the mobile network (No service and Searching). Same problem that I've had before, even though I have tried changing the sim card. ...
Click to expand...
Click to collapse
I had the same problems with my phone really bad. Finally got fed up and sent it for repair.
Got it back about 10 days ago, and haven't had any problem since. I'll wait another week or so before I really give it a clean bill of health.
The fix was quite simple... They replaced the mainboard... So it seems like there really was a hardware problem.
Royan

Royan said:
I had the same problems with my phone really bad. Finally got fed up and sent it for repair.
Got it back about 10 days ago, and haven't had any problem since. I'll wait another week or so before I really give it a clean bill of health.
The fix was quite simple... They replaced the mainboard... So it seems like there really was a hardware problem.
Royan
Click to expand...
Click to collapse
Sent in one last week, same problem, it cuts calls and cant find network and so on.

Royan and BarateaU: please keep me posted!
I'll try to let you know as well if the ROM upgrade solved my problems.

Looks like the 1.34 update has been removed from www.myqtek.fi and www.myqtek.se (although it is still available via some URL tweaking).
Running the ROM update again now succeeded without any 262 errors and radio was also updated to 1.38. Thanks for help.

No network after new ROM :(

I just flashed my Diamond with the: RUU_Diamond_HTC_NOR_2.03.409.1_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I'm an norwegian that's in the US studying, so they only gave me the norwegian version. Anyways, everything worked fine until flash, but now my phone refuses to register on the network (AT&T)!
Took the sim-card back to the at&t nokia phone, worked the first time...
I really wants to use my Diamond instead of the crappy nokia, but it would be a shame to downgrade to 1.93 (which worked just fine...).
Someone, please have a solution for me?

simply install a new radio....try 1.00.25.07 that seems to be the only quadband radio..
(you have to flash an hspl before)

It's stuck on 0% and won't continue... Tried several roms :-/

no service?????
is there a soution to this no network problem
THERE IS A CROSS IN THE RECEPTION BAR AND WHEN YOU DIAL OUT IT SAYS "OPERATION FAILED"
any replies appreciated

Quite bad if the official RUU more or less bricks the device, at least turns into just a little computer

It screwed up my Diamond aswell The gprs is completely dead, been up all night trying to fix it, several hard resets etc, nothing helps... if it was a cooked rom I could tolerate it but official roms screwing up our phones this easily pisses me off.

Mine worked again, with the old 1.93 rom!!
What the hell did they do to 2.03? I suppose the radio rom is different at least... But I couldn't change to the old radio when I had 2.03, tried using the HardSpl...
Is it possible to flash _once_ with everything from 2.03, but the 1.00.25.05 radio (which is the one from 1.93)? Doing it sequentually doesn't work.

So what I did, as the final solution:
Flash with stock 2.03 rom
HardSPL
Flash with 1.05.25 radio
Works perfect!

Hmm i did the other way round with my o2 XDA Diamond (1.93 Stock)
1. Hard SPL
2. New Radio Rom (1.09.25.23)
3. 2.03 official Ger HTC Rom (without vendor lock)
works great as well

I've seen this issue a couple of times too. With 1.93 as well as with 2.03. Did not figure out what was the cause but never had a chance to bring the device back to life with some uninstallation or radio flash. I always went back to the SPB Backup from the night before it stopped working propperly.

help!When I use the Ion, my G1 lost the signal and it can't find it anymore

Just as the title, I restart the phone and it can't find the signal either.So I recovery the RC29, and It can catch the signal after the system is up, but in a while , the signal become bad and lose it again.So does any body know what I can do?

Please Search and post in the right thread/forum. Thank you.

Mine did that to until I just flashed to the radio on Haykuro's blog and it worked fine from then on. Hope this helps

It's very strange, as the radio version was the newest when I use Ion. And I meet this problem before, this problem was fixed after I flash G2's radio. And this problem seams always happened when I use the network. I don't know whether it has the matter with the order that I flash the rom. I just recovery to RC29 and flash the radio and flash ADP1.5 rom. Thanks any way.

flashed HardSPL on Cyan 4.0.1, no more wifi : (

I am using Cyanogen 4.0.1.
I recently flashed the new radio and then flashed the HardSPL and ever since then I have not been able to scan for Wifi networks. That appears to be the only problem I am experiencing at the moment.
Any one else have similar issues, or know of how to fix this.
Thanks in advance.

The SPL doesn't have anything to do with wifi. What does the baseband say in about phone. wifi, 3g etc. are powered by the radio, try to reflash that. Also link to the new radio you flashed. Doesn't hurt to check the md5 of your download.

I would definitely start with reflashing the radio image from Haykuro's site. If you are going to continue to use Cyanogen's amazing ROM, I would NOT flash Haykuro's SPL. Stay with the HardSPL to reduce chance of bricking on accident.

evilkorn said:
The SPL doesn't have anything to do with wifi. What does the baseband say in about phone. wifi, 3g etc. are powered by the radio, try to reflash that. Also link to the new radio you flashed. Doesn't hurt to check the md5 of your download.
Click to expand...
Click to collapse
I flashed the radio from Haykuro's site, I re-flashed and I still do not get any wifi.
The wifi function will turn on fine but then when I try to scan for my network and it will display a message saying "unable to scan for wifi networks" and then the wifi function will turn itself off.
btw, I am now running CM 4.0.2

I'm running Cyanogen 4.0.1 with Haykuro's radio+HardSPL and wifi works find and everything else. wipe and reflash.

something similar happened to me on my tmobile dash.
i flashed the spl wrong or idk and then my wi-fi broke

People have had similar experiences with wifi on the xROM. Many people weren't able to get wifi up and running with HardSPL, but then upgraded to Haykuro's SPL and it started working fine.
I don't think this is mere coincidence... even though neither dev requires the newest SPL, it seems that wifi doesn't work without it.
For what it's worth, update your radio (I'm sure you're on the latest radio, but for posterity's sake, just do it again), then update to the new SPL, then reflash your ROM.
Report back... I'm guessing you'll be a happy camper.

I've never had a problem but i upgraded to hardspl before cyans newest roms. maybe something in their updates kills the functionality
you should have put the newest radio before you flashed a cupcake rom

Any updates antirock? If it's still not working after a wipe and reflash, I would recommend reflashing the newest radio and flashing Haykuro's SPL. Check my sig for more info.

uansari1 said:
Any updates antirock? If it's still not working after a wipe and reflash, I would recommend reflashing the newest radio and flashing Haykuro's SPL. Check my sig for more info.
Click to expand...
Click to collapse
Ok, here is what I did.
wiped and reflashed radio and it still didn't work.
So I reverted back to Cyanogen 4.0, reflashed radio, reflashed spl, wiped, reflashed CM 4.0.2...and now wifi is working.
However, the vibrate funciton on my soft keyboard doesn't work. I figure that it is the rom, but no one else seems to be having this problem in the CM 4.0.2 thread.
Thanks for all of your help!!

antirock said:
Ok, here is what I did.
wiped and reflashed radio and it still didn't work.
So I reverted back to Cyanogen 4.0, reflashed radio, reflashed spl, wiped, reflashed CM 4.0.2...and now wifi is working.
However, the vibrate funciton on my soft keyboard doesn't work. I figure that it is the rom, but no one else seems to be having this problem in the CM 4.0.2 thread.
Thanks for all of your help!!
Click to expand...
Click to collapse
So you're still on HardSPL? If others aren't having this problem, then try Haykuro's SPL if you meet the requirements.
I had two G1s for a while... one of them flashed to JACxROM fine, but on the other, wifi wouldn't work. They both had the same radio and HardSPL. Flashing Haykuro's SPL to that phone and suddenly everything worked fine.
I don't know why these phones are like that... maybe its some small difference with the actual hardware inside the phone, or the downloaded file you're trying to flash, or maybe whether or not you flash when there's a full moon. Your guess is as good as mine. Point is that MAYBE the newer SPL will work for you.

It's funny how wiping, uninstalling and reinstalling usually fixes everything.

how important is radio

dear developers,
i have a question about my HD. i've updated my spl booter, now i can install new roms from de cooks from the SD card. but i've now several problems.
i tried almost every roms thats available here on the forum but i get everytime the same problems.
- phone freeze's, so i have to reset the phone each time several times a day
- 3g/hspda connections lost, like on msn,email etc. again each time reset needed
those are 2 most important problems, you think you have a working phone but its frozen till you see it. its very disturbing
after this problems i went back to the original rom from the htc site. but now i get the same problems back.
so my question is how important the radio? is this maybe the reason of my problems or has other persons the same problems? or do i have a broken phone?
only the miri rom v38 isnt freezing but still the other problems
thanks in advance

mkurt68 said:
dear developers,
i have a question about my HD. i've updated my spl booter, now i can install new roms from de cooks from the SD card. but i've now several problems.
i tried almost every roms thats available here on the forum but i get everytime the same problems.
- phone freeze's, so i have to reset the phone each time several times a day
- 3g/hspda connections lost, like on msn,email etc. again each time reset needed
those are 2 most important problems, you think you have a working phone but its frozen till you see it. its very disturbing
after this problems i went back to the original rom from the htc site. but now i get the same problems back.
so my question is how important the radio? is this maybe the reason of my problems or has other persons the same problems? or do i have a broken phone?
only the miri rom v38 isnt freezing but still the other problems
thanks in advance
Click to expand...
Click to collapse
What ROM are you using? What radio version do you have?
The radio isn't necessarily that important, although it is always a good idea to flash the latest. This sounds more like a flashing problem. When you flashed the ROM, did you hard reset? Have you tried using Task29 before flashing? This can also help you update your radio as you can use the latest version for this (and ensure a clean install).

those are data i get when start up right corner
R 1132524
G 52622534u
D 15621903
what do you mean by task29?
i copy the file to sd card. then boot and install the rom. after that i always hard reset by vol up and vol down and put the phone on.
shoull i flash different then?
thanks in advance

mkurt68 said:
those are data i get when start up right corner
R 1132524
G 52622534u
D 15621903
what do you mean by task29?
i copy the file to sd card. then boot and install the rom. after that i always hard reset by vol up and vol down and put the phone on.
shoull i flash different then?
thanks in advance
Click to expand...
Click to collapse
What you need to look at is the About Phone and software in the Settings Tab. That will tell you what you have installed.
Look in the main ROM thread for task29 for information on this and how to use it.
I assume that you have used HSPL to flash your ROM.

Radio IS IMPORTANT!
Not every radio is good for area where you live / mostly use your phone. Or provider you're using...
1. Every stock ROM installs radio and rilphone.
2. Almost none of the cooked ROMs install radio and/or rilphone.
3. Not every combination radio / rilphone is working good. Rule is that you use same or closest rilphone version with your radio.
In my area I have tried almost every radio from 1.12 up, and I'm most satisfied with 1.14. 1.17 gives me sometimes better phone reception, fastest GPS lock but eats battery fastest. So you have to test what fits you best...