Hi,
I can't connect my Xperia to my Pioneer car audio system. Can connect it as BT Audio device, but not as Hands free device.
I already tried to change registry values like i've done with my old XDA Orbit 1 (where it worked pretty well), unfortunately with no success. Still no way to get it going
I wonder, why it worked on the Orbit but not on the Xperia because the problem seems to be with WiMo, not with the devices itself.
Thanks for helping
Digging this thread up again...
I tried and tried but I still can't get it to work. Even updating to WinMo 6.5 doesn't change anything.
If there is no solution, I have to give the X1 away... unfortunately...
The Omnia HD or the HTC Hero hopefully will work... but never never nerver a WinMo Mobile device again!
Related
Hi guys,
I am at the end of my tether... I just bought a JVC head unit with on board bluetooth, so I can use it as a car kit. But I can't get my Treo 750 to pair with it! It just locks up after I enter the passkey... and the car kit just says "error" after a certain amount of time. I'm running a vanilla (extended ROM removed) version of the 3 Australia ROM.
So, I rolled back to Windows Mobile 5... same problem... UNTIL I went into the Bluetooth settings and setup an incoming COM port. Then it paired up perfectly and all was well.
So I've reinstalled WM6, but it doesn't have the option to create an incoming COM port. That's really annoying. I've googled a heap, and searched these forums a fair bit too, but haven't been able to find any sort of workaround. Is there a registry hack, third party program, or some other way I can tell it to allow an incoming connection from the car kit?
Thanks in advance!
Has anyone had any ideas on this? I have a real issue now, as I rolled back to a WM5 ROM which I found on these forums but I'm having awful problems with it - it drops calls all the time and sometimes they just go silent..... the call stays connected but I can't hear the person on the other end.
I really need to get either the original Telstra WM5 ROM, or a way of getting WM6 to work with my car kit! Any ideas... anyone??
Okay... now I really feel like I'm talking to myself but anyway.... thought I'd give an update.
After heaps of trial and error, I managed to install the Universal version of the Broadcomm bluetooth stack onto my device. And it pairs - hooray!
However... when I make a call, no sound comes through the speakers
No other version of the Broadcomm stack will run on my Treo, I just get the memory error that lots of other people have mentioned.
Chalk another person down who's royally annoyed with Palm for putting such a dodgy implementation of Bluetooth into these devices. It's my one and only bugbear to date.
I have exactly the same problem when pairing my WM6 Treo 750 to a Parrot MK6100 carkit. After entering the passcode on the Treo, the device just hangs. The carkit says it has connected succesfully, but nothing happens. After restarting it does not recognize the carkit at all.
Did you find a solution yet? I am also looking for a different Bluetooth stack that is guaranteed to work with the Treo.
Good to see I'm not the only one. No, I haven't found a solution yet unfortunately
The closest I've come is that hacked Broadcomm Bluetooth stack. My only hope is that some nice developer will help us develop something that works!
Hi Ben,
I solved my problem yesterday. I tried two suggestions.
1) Leave the passcode field blank (do not enter '0000') and press next
2) Install http://www.jetwaremobile.nl (fully functional 30-day trial)
After that pairing succeeded in a couple of seconds and all is working well. Let me know how it works out.
Thanks very much MattMax!
I had tried the Jetware software previously, and it didn't help. But I hadn't tried leaving the passkey field blank. Did that this morning... it popped up with a connection dialog asking if I wanted to allow the connection... went back to the passkey screen, I entered 0000 and away the sucker went. How simple was that!!
I just upgraded to the latest ROW2.23 WM6 ROM the other day, so I'm not sure if that made any difference either. But it's now paired and (seems to be) working well, just need to make and receive a few calls to make sure.
Thanks very much for your suggestion!
Good to hear that it worked out!
I had exactly the same experience, leaving the field blank, after that entering '0000' and it worked. I had just installed Jetware Mobile, but apparently that is not necessary for the solution.
I've been having some issues with my Tilt and my car's hands free setup (see: http://forums.wireless.att.com/cng/board/message?board.id=cingular&message.id=105410). The problems seems to lie with the Microsoft bluetooth stack on WM 6.1. HTC is no help with this issue so I want to take matters into my own hands. Is there a way to replace the default Microsoft bluetooth stack with another, more reliable compatible stack from a reliable company (not Microsoft or HTC)? I don't want to get rid of my Tilt, but I need it to work right in my car. I'm thinking of staying away from purchasing WM 6.1 smartphones because of this.
frustrated...
Wow, no one has answered my post here, at ATT, at Kenwood, or on tiltsite. HTC answered only to tell me that compatibility doesn't necessarily mean that it would work (bs). This is very frustrating. I've read post all over xda developers and the rest of the internet about tilt bluetooth problems yet no one has an answer. I've completely giving up on trying to get bluetooth to work right with any of my devices (car, computer, etc). I can't imagine buying another HTC product. Good luck to everyone else out there struggling to get bluetooth to work on their tilt while the motorola, blackberry, lg, samsung, and other phone users watch with amazement and pity. Keep fighting the good fight. Hopefully one of you will win. I've completely lost!
That's a pretty strange story you've got there, because I have zero problems with my Tilt and bluetooth pairing to all manners of devices... on a regular basis, I connect my Tilt to my car's Pioneer stereo deck, to my laptop and desktop, and to my wireless headphones and I've had little to no difficulty. Actually, the easiest pairings so far have been between my Tilt and Pioneer Stereo Deck... At least for basic features - in order for the phone book entries to show on the deck's LCD display it required an upgrade from WinMo 6.0 to 6.1 and then in the deck itself I have to manually download the contact book. But that's the only troublesome thing I have to do, which is mostly an advanced feature any way that I could live (but prefer not to) without.
Sucks that you're having problems, all I can suggest is make sure you're doing everything properly... I've had no problems I couldn't overcome with my Tilt and bluetooth capable devices, especially since Windows Mobile 6.1 came out.
Hi,
I'm having the same problems, also when disconnecting from the BT carstereo after a phonecall, the device freezes up.
Anybody found a solution for this problem yet ?
Ny the way, my car stereo is a JVC KD-BT1
GRTZ,
Niels
@k4ever: Have you checked out this thread?
http://forum.xda-developers.com/showthread.php?t=285419
From what I can tell, they've ported the Widcomm BT stack to the Hermes and TyTN, so I imagine it's not far off from the Kaiser/TyTN-II, if it doesn't already work (my BT is working fine, so I'm not too likely to mes with my phone to find out-- but I hope this helps!)
-Weasel5i2
EDIT: Here's a CAB from the newer threads of the above post:
http://rs38.rapidshare.com/files/30721150/broadcomm_bt_stack.CAB
Thanks
Wow, thanks for the replies.
@ceosion
I got it working with a Pioneer deck in Best Buy. I was actually debating buying one, but I paid $500 for my Kenwood setup. All of my other phones work with it, to include other WM phone (not from HTC). I contacted Kenwood, but I have not recieved a reply.
@Weasel5i2
I tried the Widcomm stack when I used the stock ATT rom. It completely disabled bluetooth on the Tilt. I will try it with the PDA Corner rom I'm currently using (the best!) after the holiday weekend.
Thanks again for the replies!
k4ever said:
Wow, thanks for the replies.
@ceosion
I got it working with a Pioneer deck in Best Buy. I was actually debating buying one, but I paid $500 for my Kenwood setup. All of my other phones work with it, to include other WM phone (not from HTC). I contacted Kenwood, but I have not recieved a reply....
Click to expand...
Click to collapse
I am experiencing Bluetooth connection issues between the Tytn2 and a kenwood DNX8220BT As far as I've heard from kenwood the Tytn2 is only supported with the older version of Windows Mobile (6.0)
I've also tried the Kenwood with my wife's Touch Diamond (Also HTC but other CPU, don't know about the BT radio though) but that one is also experiencing trouble. I didn't get any indication when they would have a new firmware version ready.
You did indicate that you also tried another WM phone, which version of WM does that one operate on?
@Mautje
The other WM phone was a Samsung Blackjack II running WM 5. I downgraded my Tilt to the default WM 6 Rom from ATT, but I had the same problems. I'm running the PDA Corner WM 6.1 Rom now. Does matter which ROM I use, I get the same results on the Tilt.
widcomm stack a no-go
I tried the Widcomm stack. It did not work at all. Kept getting error that "there was not enough memory to run, please reset device" or something to that nature. Could not uninstall so I had to re-flash my ROM. Back to square one.
k4ever said:
The other WM phone was a Samsung Blackjack II running WM 5. I downgraded my Tilt to the default WM 6 Rom from ATT, but I had the same problems. I'm running the PDA Corner WM 6.1 Rom now. Does matter which ROM I use, I get the same results on the Tilt.
Click to expand...
Click to collapse
To bad. I was also looking into the other roms on this forum but it wil probably not work..
Kenwood is reporting that it should work with the rom version mentioned in the compatibility sheet.
In the sheet for version 1.43 firmware there is no mention at all of a rom version just the Tytn2.. I guess that's the WM 6.0 version
So I have an xperia, and I have a new JVC Bluetooth deck, I was so impressed how flawlessly it worked with my old phone the Kaiser/tilt, but to my surprise I have not been able to get it to properly pair up with my newer xperia. They will read each other and try to connect but I always end up getting an error. Sometimes it still shows up as connected but nothing works. I used my kaiser/tilt for both calls and streaming music through my new JVC bluetooth deck and I loved it, so its pretty dissapointing when I upgrade to what is/was one of the hottest & expensive windows mobile phones and it apparently has bluetooth issues.
I tried a few fixes already like changing the registry to read as a normal phone and I added in a missing bt profile, unfortunately nothings changed. I am curious tho because i had a magician and they had whole bt stacks that I messed around with, and I'm also wondering if a flash or two of a new rom may make a difference. Ocerall I'm really happy with the X1 (unlike my tilt/kaiser which had lots of problems) so much so that I don't really feel the need to flash a new rom, but if it might have a chance of fixing my bt I'm all for it.
Let me know if anyone has any suggestions, tia.
Hi everyone !
As "happy" owners already know - Xperia X2 does NOT have/support Bluetooth rSAP (remote SIM access) profile therefore it can't be paired with any modern car build in audio hands free systems.
I've try already all of proposed (for X1) solutions but unfortunatelly noone worked. All described in the forum BT_SAP.cab's have installed succesfully, afterwards I have pair it with my Mercedes Benz SAP V3 - yes 16 digit code is accepted but afterwards when they try to pair you get message on the X2 screen: "Connection Failed. Please try again when phone is ready!"
Any suggestions ?
Anyone help pls ?
timekille said:
Anyone help pls ?
Click to expand...
Click to collapse
try this little cab and read here i remember a while ago someone had a problem with a car kit and he solved it using this little app
Hi everyone,
How can i tranfer the files after connect with other devices via Bluetooth ?
I tried to tranfer with some models like Nokia but only can received files, couldn't tranfer it
mathiosn said:
i remember a while ago someone had a problem with a car kit and he solved it using this little app
Click to expand...
Click to collapse
Thanks your effort man! Unfortunately it didn't work - it's NOT Bluetooth rSAP as well. Bluetooth rSAP profile "borrows" phone SIM card ID to the car Audio hands free kit and phone goes in stand by mode...
All NOKIA's have it, also HTC (Windows Mobile), iPhone, SAMSUNG have it etc etc... but SE no - may be X2 is targeted specially for users who don't drive cars ... unfortunately for me - it wasn't written in user manual, so I bought it by mistake...
Anyone help pls ? C'mon guys - somebody must find the solution for this...
Xperia X1 used Texas Instruments Single Chip Bluetooth as far as I remember.
I read somewhere Xperia X2 is using a new Qualcomm (? not 100% sure) Single Chip Bluetooth.
That seems to be the reason that previously used rSAP cabs don't work on X2.
So we need to find somebody who knows if any HTC phone or other WM6.5 phone is using such Qualcomm single chip bluetooth.
HTC's HD2 or Touch Pro2 for instance is using a Broadcom bluetooth...That would not work either I guess.
Anyone find a solution ? c'mon guys, some of you are smart enough and ca do it...
timekille said:
Hi everyone !
As "happy" owners already know - Xperia X2 does NOT have/support Bluetooth rSAP (remote SIM access) profile therefore it can't be paired with any modern car build in audio hands free systems.
I've try already all of proposed (for X1) solutions but unfortunatelly noone worked. All described in the forum BT_SAP.cab's have installed succesfully, afterwards I have pair it with my Mercedes Benz SAP V3 - yes 16 digit code is accepted but afterwards when they try to pair you get message on the X2 screen: "Connection Failed. Please try again when phone is ready!"
Any suggestions ?
Click to expand...
Click to collapse
Same for me .... I need the rSAP functionality, together with reading contact informations via bluetooth, so that phone numbers of contacts show in the carkit.
harry
Business offer: If someone can make the damn cab fixing Bluetooth rSAP functionality - it can post it on Windows Mobile Marketplace and make a LOT of money -c'mon guys, somebody do something...
i face the same problem with sony ericsson mw600 and i solve it with this applciation :
JETware
http://www.jetwaremobile.com/
i have cracked version if you need it i will search in my PC and get it back to you
That looks like a really good application ... especially if it allows using voice dialing with the X2 ...
Anyone tried it on an X2? Waiting for a fully functioning version ...
try this
wait your feedback
NOTHING Works for Bluetooth with X2!
Have to say that this does NOT work either! Nothing works so far! Sound is just not routed through the bluetooth...no matter what!
Even if you have the wired set plugged in, sometimes sounds still come out of the speaker rather, ie. camera sound!
Nothing will connect to the bluetooth, no voice commander, no voice command, not nothing... the only time the sound connects is during a regular phone call (if the bluetooth stays connected that is ;-)
If anybody has a PROOVEN solution.... kindly let's hear
http://forum.xda-developers.com/showthread.php?t=479234
can be?
we are talking about X2(!) not X1 here!
What is your posting mean???
We are talking about the X2(!), not the X1. That is in regards to the Bluetooth Situation -among other things- A TOTAL DIFFERENT ISSUE!
With my X1 all worked perfectly fine. With my X2 now, NOT!
So I don't understand you posting....
Hi there,
I have been lookimg for a couple of days to try to resolve the bluetooth problem with my SE X1 but i can't find any sollution for this.
Can someone here help me with this?
Greetings, Dennis
What kind of problem have you got?
Thank you for your interest in this,
it seems to be impossible to pair with hands free kit.
in this case it is a navigon 2150 max.
the x1 has found the navigon, and the navigon sometimes doesnt find the x1.
both are tested with other bluetooth device (htc phone).
now i have been reading the last couple of days about this problem and i do know that i am not the only one with this.
sone ericsson x1 and bluetooth are not realy friends.
also i have tryed with al kinds of BT programs found here on XDA dev. but nothing seems to work.