I use my kaiser in conjunction with a voice activated parrot car kit.
Problem is when i attempt to make a call using it, the S2U software blocks the voice dial activator.
Is there a way around this?
alternatively, im running the manilla 2d software, and just need a keylock option on the main screen, and cant seem to find out how to get one!
any help greatly appreciated,
cheers
joropug,
While I don't have a solution, you may be interested to know that I have been using a Kaiser (XDA Stellar from O2) with a Parrot CK3100 car kit and S2U2-1.62-QVGA without any problems. Up until yesterday I had the stock WM6.1 ROM but just changed to the Hyperdragon IV Rhodium ROM, which it works well.
If you think it might help to compare, settings let me know.
Related
Hi all,
The TyTN was never great at this and it *appears* the Kaiser may be no better. Phone book sync with my TomTom occasionally works. With the Jaguar (factory fit bluetooth) it works fine. Most annoyingly with my SE HBH-DS980 it doesn't work at all.
Is this HTC's fault, WM6's fault or Sony's?????
Rich
sorry if this comes off as hi-jacking but since u mentioned bluetooth, for all of us TyTn 1 converts, how is voice command from microsoft on this? does it work throught the headset with no tweaks?
I have quite a bit of experience with the TyTN hermes tweaks to get Microsoft Voice Command to work with the Hermes but not only will the Kaiser NOT work without the tweaks - I can't get it to work with the tweaks.
I followed the exact instructions like I always have listed in the Hermes Wiki section titled Utilities and Software Tweaks (including Bluetooth Voice Command installation and the Registry changes). However after the changes I cannot initiate a Bluetooth instruction via the Bluetooth device. If I initiate the call via the handheld it works great as far as stability and sound quality.
I am going to post this as a new thread also.
Any ideas?
I have found this and a few other things that shohw mw there a quite a few differences between the Hermes with a WM6 rom and the Kaiser with it's shipped ROM.
Kaiser Bluetooth works on stock ROM Xda Stellar
I used to have it working on my i-tech mini ii but recently upgraded to Dutty's WM 6.1 just to see it failing. It was just a simple tap on the BT device and voice command worked perfectly. Im still at lost on how to resolve this and I just got Cyberon Voice Commander running on button 6 but the simple tap, i think it may need some registry tweaks.
Any ideas?
There have been several threads where members have commented that Voice Cmmd 1.6 worked very well on 8125 but not on Kaiser/tilt (or on the 8525)- the problem is poor recognition through the phone mic (not through BT) - VC worked great on the 8125 but not on either the 8525 or the 8529/tilt. admittedly some say they do not have the problem but others do (as do I on both the 8529 and 8525)and I can not find any explanation - it seems like the mic is either too sensitive or not enough - I have tried switching the ACG mic to either enabled or disabled with no clear difference in performance of VC recognition
Sooo..
- does anyone have any ideas ?
- are there any ways to adjust the mic other than just enabling/disabling ACG?
THANKS!
I can add that Voice Commander does not support the Kaiser as well.
?Glitch
?Glitch said:
I can add that Voice Commander does not support the Kaiser as well.
?Glitch
Click to expand...
Click to collapse
It works fine on my Att Tilt, VC version 1.6, no worries.
Voice command works just fine on my unlocked TyTN II
greg3d said:
Voice command works just fine on my unlocked TyTN II
Click to expand...
Click to collapse
Same here - works great.
Bratag said:
Same here - works great.
Click to expand...
Click to collapse
Same experience. In fact, mine works much better than it ever did on my Eten M600 and until recently my Dopod 838 Pro over WM6 (aka HTC Hermes/TyTN). Do that note that I use mine with a BT headset with the TyTN II (Kaiser) and I no longer have to install hacks for it to work when the BT headset button is pressed. Everything works after first install.
I replaced my 8125 with a tilt. I had VC1.6 on both. it works the same on both. both work well. people just like to whine
It works great on my AT&T Tilt as long as I use my headset. When I don't it's pretty crappy, by luckily for me only time I want to use voice command is with my headset.
the people that are having problems should turn on AGC. i dont have to as it's usually quiet around me and I speak loud and slow, without mumbling
I'm wondering if those that are having no problems with Voice command are finding the same one issue I have found. The one feature that does not work for me is the caller Id annoucement in your BT headset when a call comes in before you answer it. The VC features list states this is a feature but it has never worked for me. How about you guys?
Voice Command works MUCH better on tilt / kaiser if you turn "ON"
automatic gain control in phone settings.
DLD
I have to agree. I had AGC off and I had trouble with voice command, I read a thread that said to turn it on and now I do not have any problems.
Strangely, in my limited testing, I got better results with it off.
I have tried VC1.6 both with and without hacks and I am unable to get it working from the BT headset button. Worked fine on my Hermes though (with hacks).
I guess I might need to do a hard reset but then i have to contact Tomtom to get a new ID licence from them
I have TomTom or CoPilot open and take/make a call via my bluetooth headset. Both programs will then stop talking to me both during and after the call. I have to reset the device to get them to talk again (even restarting the program doesn't work). Sound on the device functions properly. Is there anyone else experiencing this and know of a fix?
Maybe give us your Rom and radio for help.
Sure its garmin's wm6.1 rom (v1.2 I think) with the radio that's 1.58... (I'm at work without my phone (I work in a prison) thus cannot check. But, this was a problem with TomTom on my tilt with the standard att rom before I changed to garmin also.
Thanks,
Alan
After updating my MDA2 from WM 2003 to WM 6.1 there will be no more sound connection with my original T-Mobile car kit. What the hell is changed in 6.1? Is there a registry tweak? If not, how can I downgrade to WM2003? I don´t find any ROMs for 2003 here. I can get a MDA2 with WM2003. Can I create a image from this one and restore my MDA?
Rolf
No, problem to get a T-Mobile WM 2k3 ROM, you can download it there:
http://www.xda-zone.de/thread.php?id=3373
or O2 ROM here: http://www.o2online.de/nw/business/hilfe/download/xdaupdate/older/xda2/index.html
Which of the 6.1 roms do you upgrade to? I have got a car kit too, but I usually don´t use it. I´ll try it if I can find some time to spend it, on it.
Interesting issue
Ups, that was my first double post, so I have to edit it.
Which FSE do you want to try? Mine is the original xda II car kit and it worked well with teijaks WM6.0 german rom, as I tried it last time.
Or do you miss the possibility use the phone without pressing it on your ear, if it to loud around like in a car. In this case try to install the small app speakerphone. It gives you back the (free speaking) function to switch the speaker loud.
BTW: It took me about seven seconds the links, by simply google (xda update rom download). And don´t be pissed:
There is a very strong medicine, to the most interesting issues, called: search in the top row of buttons of this forum.
So use you brain power, it the best weapon you have.
And a good hint for all the brave guys, who want to upgrade for the fist time:
First you have to collect all you need, to switch back to your original rom, cause:
The good girls go to heaven, but the bad girls go everywhere!
So, good luck
Sebastian
To Rolf PM me if you have probs to discuss.
Hello muckelmaus,
It´s the wm6_1_Himalaya_GER_rom_by_efsane.
You think it´s a bug in this ROM?
Do you have another?
But where can I download a T-Mobile 2K3 ROM?
I tried searching for hours in the net. Also in the WIKI. Nothing. Or I am blind?
The MDA will be charged, but there is no switch to the car speakers. Only the build in speaker is working. So the FSE is sinceless. So it must be the OS, cause it is no hardware switch. I checked with my XDA2i, and this is working. But the sound is bad. No basses. Maybe the FSE is only working with WM2003 (not with WM2003se)? I connect it with a high/low level adapter to my radio, and this is working fine with the MDA2 with WM2003. Great sound with Pocket Music. I also buyed a original XDA car kit at ebay for € 2,46 but didn´t test it at this time. I was really happy after finding the registry tweak that don´t cut my notes in the contacts, cuase everything seemed to be working, and now I am pissed.
So I really need help.
On you qestion of your fist post, there is a way to ripp your rom out of your device, as swampy395 described it, to recook roms, but then you are on the way to build your own rom.
I don´t know if it is a bug of this ROM you tried but ther are some other german rom in here:http://forum.xda-developers.com/showthread.php?t=379017 including my fully loaded version of Athers Dark Edition
Btw: which reg tweak you are talking about?
Hello Sebastian,
Thank´s for reply.
My FSE ist the original T-Mobile. Before upgrading to 6.1 my MDA2 is working fine with the car speakers. Now he is sending no sound to my radio, only the MDA internal speaker is working. Before I can listen to musik over my car radio, and a call is coming, he will switch to telefone, after ending, the musik is comming back. I don´t install the added speaker, cause I want to hear stereo. So the HL/LL adapter.
The links that you found are WM2003se links. But I am looking for WM2003.
Wait, I send you a PM.
Martell
EDIT: Found T-Mobile WM2003 at [URL="https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_2.htm[/URL].
Downgrade and now car kit is working.
But why?
Hi,
I'm using HTC Kaiser (WM6.0)and car unit Clarion CZ309E.
I can play music via A2DP make a call but can't enter via BT to my phonebook for any contacts
Is there any chance if I upgrade Rom or Radio to solve this problem?
I'm mad of knowing these all functions all working with other dump-phone like Sonyerricson, old Nokia etc.
Bluetooth Car Unit
I've had the same problem...
What I found was this software from www.jetwaremobile.com
After I installed the software, I had no connection problems and was able to upload my contacts from WM6 and was even able manually use both BT Phone & BT Audio at the same time [Listen to music from phone while WM6 phone is connected....
I'm not sure but I think they may still have a 30 day trial.
This may correct or move you in the wright direction...
Good Luck!
Thanks for that.
I knew about JETWARE but I still don't try it.
I just only hoped in another solution... like WM (Microsoft) can't be so stupid in implementing possible features to own operating system
Hello,
I do have the same unit and the same problem.
While appairing is working good, I can't access to my contacts via this unit (CZ309E clarion) with both phones (Polaris WM6.5 customized and Leo stock).
I do have checked all cross on the phones but no access possible yet.
I haven't tried third party software yet.