Hi all,
The TyTN was never great at this and it *appears* the Kaiser may be no better. Phone book sync with my TomTom occasionally works. With the Jaguar (factory fit bluetooth) it works fine. Most annoyingly with my SE HBH-DS980 it doesn't work at all.
Is this HTC's fault, WM6's fault or Sony's?????
Rich
sorry if this comes off as hi-jacking but since u mentioned bluetooth, for all of us TyTn 1 converts, how is voice command from microsoft on this? does it work throught the headset with no tweaks?
I have quite a bit of experience with the TyTN hermes tweaks to get Microsoft Voice Command to work with the Hermes but not only will the Kaiser NOT work without the tweaks - I can't get it to work with the tweaks.
I followed the exact instructions like I always have listed in the Hermes Wiki section titled Utilities and Software Tweaks (including Bluetooth Voice Command installation and the Registry changes). However after the changes I cannot initiate a Bluetooth instruction via the Bluetooth device. If I initiate the call via the handheld it works great as far as stability and sound quality.
I am going to post this as a new thread also.
Any ideas?
I have found this and a few other things that shohw mw there a quite a few differences between the Hermes with a WM6 rom and the Kaiser with it's shipped ROM.
Kaiser Bluetooth works on stock ROM Xda Stellar
I used to have it working on my i-tech mini ii but recently upgraded to Dutty's WM 6.1 just to see it failing. It was just a simple tap on the BT device and voice command worked perfectly. Im still at lost on how to resolve this and I just got Cyberon Voice Commander running on button 6 but the simple tap, i think it may need some registry tweaks.
Any ideas?
Related
Can i get link to MMS fix and Bluetooth fix? thank you
Here they are:
http://forum.xda-developers.com/search.php
http://wiki.xda-developers.com/
still not clear
I understand u want me to read the links, i have been to those links and they do not say anything specific about how to make the bluetooth stable. Also i installed MS voice command and it give me a message to reinstall it, any ideas on this? it talks after reboot "voice command is ready", then the error pop up. Anyone experienced this yet?
BLUETOOTH HEADACHE
Hi, i aplogize if this is just another repeat, but i need help with my bluetooth, it keeps disconnecting, it unchecks itself, ad it is just unreliable. I have WM5 installed with the button fixes installed. Please if someone can direct me to the solution for a patch that makes my bluetooth reliable and stable, no more disconnecting, and also how can i route audio to the bluetooth headset, when it is on, so i can use voice command from the headset. Thank you for your help, i am a newbie, the links posted above don't take me to the solution, can i get the cab file for the stable bluetooth fix? or is there something you guys to keep it running? i have tried the checkbox and clikc on start>today, was not working
He is suggesting that you read the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_FAQ
Except from one of the wiki's
Why is it that Bluetooth disconnects after 10 minutes of turning off my device?
There is currently not a solution to use Voice Command or listen mp3 files through your Bluetooth Headset (Did not work under wm2003se either)
These are known problems. No solutions yet.
Bluetooth Headache
Well from my readings, Mamaichi and others have been extracting bluetooth stacks and having some problems, it is just that their solutions so far are spread across so many topics and boards that i am confused. i use HBH-300, could that be the problem? If bluetooth stacks can be extraced fromoter devices, can it be extracted from the razr phone and customized to fit MDAIII, cause my bluetooth on my razr phone is SOLID, no glitches what so ever. And any news on audio diversion to bluetooth?
What ???
I installed Voice Command 1.5 and it worked great with WM5. Had no problmes with VC.
downgrade
i have had WM5 for over 3weeks but it not worth it for me. I am back to 2003SE. WM5 is very unstable for me, i have all the patches and stuff, but it is slow, calls don't come in, so i will be using 2003 again. Good job to Buzz and Mamaichi and those who made WM5 possible. Is there a way to have picture caller ID with 2003SE? I had it when i first bought the system, so is there another one i can download? Thanks
FYI
Just installed MS Voice Command 1.6 Retail (1.60.4622.0) and it seems to run fine on my AKU3.2 1.3.2
Does it work over bluetooth handsfree voice dial activation?
Mr_Ding
do you use bluetooth handsfree to voice dial?
i have been trying to get it working with IIs with no luck (I use ITech mini II bt handsfree + XDA IIs)
If not, I guess Cyberon voice dialer is better than VC1.6 - less memory and very accurate.
cheers
No, haven't tried bluetooth handsfree.
I defined 1 hardware button as Voice Command, press it, then I say "Call Mary at home" for example.
Will try next week (have my BT headset at work, since I hardly use it)
joseph.sapri said:
Mr_Ding
do you use bluetooth handsfree to voice dial?
i have been trying to get it working with IIs with no luck (I use ITech mini II bt handsfree + XDA IIs)
If not, I guess Cyberon voice dialer is better than VC1.6 - less memory and very accurate.
cheers
Click to expand...
Click to collapse
Check this thread for a cab file that allowed me to get VC to work via BT...
http://forum.xda-developers.com/showthread.php?t=283412&page=5
more questions
ercave1,
Thanks for the info. I checked the forum and got the cab file. At the moment I have not tried it, however got some questions:
1. After installing VC1.6, wireless icon disappear from the tray... where has it gone? does it affect wireless funct? After uninstalling, the icon comes back... weird...
will try the cab later and give feedback...
cheers
There have been several threads where members have commented that Voice Cmmd 1.6 worked very well on 8125 but not on Kaiser/tilt (or on the 8525)- the problem is poor recognition through the phone mic (not through BT) - VC worked great on the 8125 but not on either the 8525 or the 8529/tilt. admittedly some say they do not have the problem but others do (as do I on both the 8529 and 8525)and I can not find any explanation - it seems like the mic is either too sensitive or not enough - I have tried switching the ACG mic to either enabled or disabled with no clear difference in performance of VC recognition
Sooo..
- does anyone have any ideas ?
- are there any ways to adjust the mic other than just enabling/disabling ACG?
THANKS!
I can add that Voice Commander does not support the Kaiser as well.
?Glitch
?Glitch said:
I can add that Voice Commander does not support the Kaiser as well.
?Glitch
Click to expand...
Click to collapse
It works fine on my Att Tilt, VC version 1.6, no worries.
Voice command works just fine on my unlocked TyTN II
greg3d said:
Voice command works just fine on my unlocked TyTN II
Click to expand...
Click to collapse
Same here - works great.
Bratag said:
Same here - works great.
Click to expand...
Click to collapse
Same experience. In fact, mine works much better than it ever did on my Eten M600 and until recently my Dopod 838 Pro over WM6 (aka HTC Hermes/TyTN). Do that note that I use mine with a BT headset with the TyTN II (Kaiser) and I no longer have to install hacks for it to work when the BT headset button is pressed. Everything works after first install.
I replaced my 8125 with a tilt. I had VC1.6 on both. it works the same on both. both work well. people just like to whine
It works great on my AT&T Tilt as long as I use my headset. When I don't it's pretty crappy, by luckily for me only time I want to use voice command is with my headset.
the people that are having problems should turn on AGC. i dont have to as it's usually quiet around me and I speak loud and slow, without mumbling
I'm wondering if those that are having no problems with Voice command are finding the same one issue I have found. The one feature that does not work for me is the caller Id annoucement in your BT headset when a call comes in before you answer it. The VC features list states this is a feature but it has never worked for me. How about you guys?
Voice Command works MUCH better on tilt / kaiser if you turn "ON"
automatic gain control in phone settings.
DLD
I have to agree. I had AGC off and I had trouble with voice command, I read a thread that said to turn it on and now I do not have any problems.
Strangely, in my limited testing, I got better results with it off.
I have tried VC1.6 both with and without hacks and I am unable to get it working from the BT headset button. Worked fine on my Hermes though (with hacks).
I guess I might need to do a hard reset but then i have to contact Tomtom to get a new ID licence from them
I'm having a rather odd problem using Dutty's 6.1 rom with Microsoft Voice & my bluetooth.
While it works fine when it comes to initiating itself appropriately, once the connection between VC and the bluetooth are supposed to terminate, they don't, and consequently all sounds are routed to my BT after using VC.
I'm assuming it's something to do with an incompatability between WM 6.1 and Voice Command because I didn't have this issue with Dutty's WM6-based V4 rom.
Any ideas?
I remember seeing some sort of registry tweak that could fix certain problems with VC, but I can't find the thread using the same search keywords I used before.
Still struggling with this one. Thus far the only way to get the BT to turn off is to either power down the Kaiser, the Bluetooth, or disable BT on the Kaiser.
I use my kaiser in conjunction with a voice activated parrot car kit.
Problem is when i attempt to make a call using it, the S2U software blocks the voice dial activator.
Is there a way around this?
alternatively, im running the manilla 2d software, and just need a keylock option on the main screen, and cant seem to find out how to get one!
any help greatly appreciated,
cheers
joropug,
While I don't have a solution, you may be interested to know that I have been using a Kaiser (XDA Stellar from O2) with a Parrot CK3100 car kit and S2U2-1.62-QVGA without any problems. Up until yesterday I had the stock WM6.1 ROM but just changed to the Hyperdragon IV Rhodium ROM, which it works well.
If you think it might help to compare, settings let me know.