Related
:? Hi guys Just wondered if any of you guys are experienced problems with the Jabra bt800 working intermittently. Sometimes it works but most of the time it does'nt . I've upgraded to Broadcom 3900 and although blue tooth audio still crackles its not as bad.. The headset works alot better with my SPV C500.. Any ideas or experiences :?:
bt 800
hi i have xda2s with bt 800 working somtimes
i upgradeed to bt3900 but i see no change
somtime i takes 5-6 kye presss to unswerr a phone call
i do not have any audio problem the audio is ok
glad to know i am not the only one.. cheers for replying
did you try to contact jabra support???
I have a contact in GN Netcom so will have a chat with him next week and post the response here
thenks :wink:
:? Ok after talking to my contact in GN Netcom we have come to the conclusion (seings as it works fine with my Motorolla V3 and Nokia 6810 and 6820 and Siemens SK65) that the issue lies with the Bluetooth stack on my 2s.I did explain about this that i had upgraded it to the newer version and i personally believe they have not totally replicated the way the Bluetooth in the xda2s behaves the same as a normal bluetooth enabled phones.
I believe that because it works fine on most of the Manufacturers phones and the XDA's of this world are low priority to get it right.. I still believe it will be fixed in future Bluetooth upgrades on the xda2s.. doh still think that even though the display and buttons work intermittently it is still worth having for the DSP
The problem still exists!
I have Qrek 9090 and Jabra t800. Audio is very good and also on the good range.
BUT...
Main problem (even with Jabra 800 fix CAB file) is that I can't normaly answer the phone call. It takes about 5 or 6 times before I can reply the call. And also, it takes about 2 seconds before I can hear other side opponent.
I just wonder if you people have some kind of this problem. Any expirince. Could you please share with me some information.
I use Danghard rom 1.44 wit BT 3900.
Thanks a lot.
Leonid.
Update to Latest Ow2 ROM...the BT 3900 workd flaw lewssly.I hv tried BT with SE HBH 30/262 etc Blue Trek G2 and no problems....Also with Motorolla 810...
Moreover, Motorolla and Bluetrek supports voice dialing too :lol:
Thank you, but I'm talking about Jabra BT 800, cause it has so many features that I need. So, I would like that my Jabra headset will work fine with Qtek 9090.
Guys, please help! :lol:
Guys! Really need your help.
I used before another headset and didn't have any problems. But after I bought Jabra BT 800 I got serous problems. It really takes about 6 rings before I can answer a call. So, a lot of people just hang up and I have to call them back. :evil:
Nothing really helped. :evil:
I'm confused, cause I really like this headset and would like to use it.
HELP!
:lol:
Thanks!
hdubli said:
Update to Latest Ow2 ROM...the BT 3900 workd flaw lewssly.I hv tried BT with SE HBH 30/262 etc Blue Trek G2 and no problems....Also with Motorolla 810...
Moreover, Motorolla and Bluetrek supports voice dialing too :lol:
Click to expand...
Click to collapse
Voicedialing? How?
I have a HS810, it works fine, but how do you have voicedialing with it?
Moreover, Motorolla and Bluetrek supports voice dialing too
Voicedialing? How?
I have a HS810, it works fine, but how do you have voicedialing with it?
well I too own a Bluetreck G2R and a lot of crackling sound I have upgraded my BT stack to 3900 and most of my callers only hear the crackling so I have to swap my call to the phone and talk or have to call them back
also how do u use Voice dailing on the bluetreck for my xda IIs ???
can some one help me ?
Hi..use search,,,still this is how to do a voice dialling:
1) Install MS Voice command and assign a Hardware button(any) to activate the software so that it an listen to our commands.
2) Now, just press the "Call answer" button of your BT.By doing so it will activate the sound on your 2s.Then press that harware button of Voice command and speak...
It works flawlessly
Thanks
thank s
Ill def try going to Delhi, will return and sure thry Voice dial and re-install my BT stack to see if there is crackling sound still there
also how long can you try to distance your phone from the BT
I got one Jabra bt800
its superb and must say its a best one around with lots of features
Eehheh and you call that voice dialing?
If i had to do all of that to voice dial i could also press the button on the device and talk the name to it. And that would be one click less than with your solution.
I think the idea of voice dial with bluetooth is to keep the phone in your pocket and do the talking via bluetooth only.
hdubli said:
Hi..use search,,,still this is how to do a voice dialling:
1) Install MS Voice command and assign a Hardware button(any) to activate the software so that it an listen to our commands.
2) Now, just press the "Call answer" button of your BT.By doing so it will activate the sound on your 2s.Then press that harware button of Voice command and speak...
It works flawlessly
Click to expand...
Click to collapse
Re: Thanks
spread_smiles said:
thank s
Ill def try going to Delhi, will return and sure thry Voice dial and re-install my BT stack to see if there is crackling sound still there
also how long can you try to distance your phone from the BT
I got one Jabra bt800
its superb and must say its a best one around with lots of features
Click to expand...
Click to collapse
But can you tell me. Do you also have such problems with Jabra 800 as I have. The sound of BT and range is best. But what about time to answer the call. I press answer button hundred times to be able to speake with opponent.
Hi again guys.
Still can't solve my problem with BT 800.
I contacted with several companies but didn't get any correct answer.
Really don't know what to do.
Can you please tell what exactly this CAB file from FTP fixes cause nothig changed since I installed it.
Thank you and please foget me for bothering you.
Leo.
Gentlemen,
After a week or so exploring this forum and experimenting with my Logitech bluetooth hands free I've got a feeling that the only possible solution for the moment is to prevent the BA from getting into the sleep mode. Use ScreenLock or Mort Saver instead.
Solid_Lynx said:
Gentlemen,
After a week or so exploring this forum and experimenting with my Logitech bluetooth hands free I've got a feeling that the only possible solution for the moment is to prevent the BA from getting into the sleep mode. Use ScreenLock or Mort Saver instead.
Click to expand...
Click to collapse
Well, thank you.
But as I understood from different threads in forum this is one way.
But... I'll kill battery of PDA very quickly. Really don't think that it's a good idea.
People from Jabra told me that new firmware will come soon and will help to solve this problem.
So.. I think that it's not the fault of PDA or ROM... :?
has anybody got msvc working over headset? if so what are you using? the program I was using with the hermes doesn't work on the tilt. thanx
MSVC 1.6 works out of the box as advertised. No need for any Hermes hacks (chances are they'll break something).
I've mapped mine to the voice activation key (the one with the speach bubble) but it won't start with my BT headset.
msvc 1.6 doesn't work out of the box! when I hold down button on my headset the dialpad opens and I can hear the headset connect but the msvc doesn't start. I have added a 6 buton in the reg to replace ptt with the voice command.
goestoeleven said:
MSVC 1.6 works out of the box as advertised. No need for any Hermes hacks (chances are they'll break something).
Click to expand...
Click to collapse
Well, VC does work out of the box, but you probably need to re-map buttons. On the TyTN II, Button 6 was Voice Speed Dial, and I needed to change that. On the Tilt, it's PTT and you'll need to change that.
But once I made that change, it worked like a charm without any issues on my TyTN II. I'm using a Plantronics Discovery 655, which also might matter - perhaps deleting and re-partnering with your headset might help.
With PTT re-mapped to VC you're having a problem?
LuXx said:
has anybody got msvc working over headset? if so what are you using? the program I was using with the hermes doesn't work on the tilt. thanx
Click to expand...
Click to collapse
Give this a shot
http://forum.xda-developers.com/showthread.php?t=333260
I too have had no issues with MS Voice Command 6 on Kaiser. I was never able to get it to work reliably on my Hermes, but notifications and all commands work great over my BlueAnt headset. I currently don't have a button on the phone mapped to it, I only use the headset buton.
MSVC & Plan. 655
PerfAlbion said:
Well, VC does work out of the box, but you probably need to re-map buttons. On the TyTN II, Button 6 was Voice Speed Dial, and I needed to change that. On the Tilt, it's PTT and you'll need to change that.
But once I made that change, it worked like a charm without any issues on my TyTN II. I'm using a Plantronics Discovery 655, which also might matter - perhaps deleting and re-partnering with your headset might help.
With PTT re-mapped to VC you're having a problem?
Click to expand...
Click to collapse
I am using the same headset with the Tilt (Att Rom) and I am not very pleased with the BT setup. I do not get notifications through the headset like I used to; and with the BT ROM available, I have no way to click on announcements through the headset. One other problem is that now the reception distance with the 655 is about 6ft at best. Any recommendations on what I can change?
I may flash over to HTC ROM, but I am a little scared as to doing that plus I would have to re-install all my apps (I think).
LuXx said:
msvc 1.6 doesn't work out of the box! when I hold down button on my headset the dialpad opens and I can hear the headset connect but the msvc doesn't start. I have added a 6 buton in the reg to replace ptt with the voice command.
Click to expand...
Click to collapse
Sorry, I neglected to mention that I also completely disabled Cyberon VoiceDialer and disabled PTT before intstalling MSVC. Then it works out-of-the-box perfectly... even notifications!
On a Tilt, it did not work at first, but when I did the registry edit to allow for changing the PTT button, and set that button to VC, it works.
Thanks for pointing me in the right direction. Working great!
kavi said:
Give this a shot
http://forum.xda-developers.com/showthread.php?t=333260
Click to expand...
Click to collapse
There have been several threads where members have commented that Voice Cmmd 1.6 worked very well on 8125 but not on Kaiser/tilt (or on the 8525)- the problem is poor recognition through the phone mic (not through BT) - VC worked great on the 8125 but not on either the 8525 or the 8529/tilt. admittedly some say they do not have the problem but others do (as do I on both the 8529 and 8525)and I can not find any explanation - it seems like the mic is either too sensitive or not enough - I have tried switching the ACG mic to either enabled or disabled with no clear difference in performance of VC recognition
Sooo..
- does anyone have any ideas ?
- are there any ways to adjust the mic other than just enabling/disabling ACG?
THANKS!
I can add that Voice Commander does not support the Kaiser as well.
?Glitch
?Glitch said:
I can add that Voice Commander does not support the Kaiser as well.
?Glitch
Click to expand...
Click to collapse
It works fine on my Att Tilt, VC version 1.6, no worries.
Voice command works just fine on my unlocked TyTN II
greg3d said:
Voice command works just fine on my unlocked TyTN II
Click to expand...
Click to collapse
Same here - works great.
Bratag said:
Same here - works great.
Click to expand...
Click to collapse
Same experience. In fact, mine works much better than it ever did on my Eten M600 and until recently my Dopod 838 Pro over WM6 (aka HTC Hermes/TyTN). Do that note that I use mine with a BT headset with the TyTN II (Kaiser) and I no longer have to install hacks for it to work when the BT headset button is pressed. Everything works after first install.
I replaced my 8125 with a tilt. I had VC1.6 on both. it works the same on both. both work well. people just like to whine
It works great on my AT&T Tilt as long as I use my headset. When I don't it's pretty crappy, by luckily for me only time I want to use voice command is with my headset.
the people that are having problems should turn on AGC. i dont have to as it's usually quiet around me and I speak loud and slow, without mumbling
I'm wondering if those that are having no problems with Voice command are finding the same one issue I have found. The one feature that does not work for me is the caller Id annoucement in your BT headset when a call comes in before you answer it. The VC features list states this is a feature but it has never worked for me. How about you guys?
Voice Command works MUCH better on tilt / kaiser if you turn "ON"
automatic gain control in phone settings.
DLD
I have to agree. I had AGC off and I had trouble with voice command, I read a thread that said to turn it on and now I do not have any problems.
Strangely, in my limited testing, I got better results with it off.
I have tried VC1.6 both with and without hacks and I am unable to get it working from the BT headset button. Worked fine on my Hermes though (with hacks).
I guess I might need to do a hard reset but then i have to contact Tomtom to get a new ID licence from them
My Jabra BT500 works great, the CK3100 has nothing but trouble Parrot US support is being particularly unhelpful - curious if anyone has made it work or not.
This the stock AT&T Tilt ROM with the retail shipped VC 1.6.
Richard
the parrot itself is working for me, but my stereo (06 Saab 9-3) doesn't play well. VC does work, just not great but I believe that it's due to my car. I'm just using the Parrot's voice command
spartanrob said:
the parrot itself is working for me, but my stereo (06 Saab 9-3) doesn't play well. VC does work, just not great but I believe that it's due to my car. I'm just using the Parrot's voice command
Click to expand...
Click to collapse
Yeah, that's Parrot USA's "solution" - but MS Voice Command is soooooo much better I can't go back. I'll literally change BT car kits first
Did your Parrot work with other phones previously? My CK-3100 in this car ran great with my Hermes/8525 - the Tilt sets it atwitter though.
Richard
My parrot has been consistent among all phones, it's really more of an issue with the stereo in the Saab. Ask me again in 6 months when my lease is up and I move the parrot to a new vehicle
My CK3100 works fine with TyTN II and Voice Commander 1.6
"What is my battery level" , "What song is this" etc
...very cute !
eegboplegin said:
My CK3100 works fine with TyTN II and Voice Commander 1.6
"What is my battery level" , "What song is this" etc
...very cute !
Click to expand...
Click to collapse
Would you mind telling me some things about your setup?
Sounds like you're running the stock HTC ROM?
What revision Parrot firmware are you on?
What's the full version of your Voice Command? 1.6.xxxx <- what's the xxxx
Stupid but obvious question - have you tried making a voice-dialed call and then trying another VC operation? E.g. press Green button on parrot, "Call voicemail at work" have call progress, press Red button on parrot, wait a moment, then press Green button again and try something like "What are my appointments tomorrow?"
Thanks a million!
Richard
when you say it works well, does that mean that sound is routed through carspeaker?
when I press green button and say 'what time is it' I get the answer only through Tytn loudspeaker
Let me give a tip I found for my Parrot CK3000 & VoiceCommand.
If you have any voicetags in your Parrot... it won't pass the ball to VoiceCommand.
So I just wiped its memory (it's Green+Red on mine) then just paired it once more with my kaiser, and stop here! (do not save any contacts/voicetag in the kit)
At this point, when you'll press the Green button, it will get the VoiceCommand prompt
thanks Sebbes (I did that already).
But will the audio be routed to the carspeaker?(or still through the phones inbuilt speaker?)
VoiceCalls : yes (VC invit, and your actual calls)
Any other audio : no (like GPS voices etc)
I have installed two versions of 1.6 on my Tilt. The newest one fixes the announcements but seams to break BT voice command.
The announcements don't work on the older one but BT voice command does.
I will live without announcements...
Later, Lew
P.S. Working BT Voice command v1.60.4622.0
lewcamino said:
P.S. Working BT Voice command v1.60.4622.0
Click to expand...
Click to collapse
Thanks, which Parrot kit and which f/w revision on it?
Richard
Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
I use Voice Command, that allows voice dialling through my Jawbone Headset.
fmohiy said:
Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MSVC does by replacing the the dll with it's own.
My rom also does by replacing dll from HD.
Me too, I use MS Voice Command with SonyEricsson HBH sets and all work by pressing the button on headset which brings up the mic from voice command to command-the-phone
fmohiy said:
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MS Voice Command 1.6 here. It works about 75% of the time. Sometimes it doesn't work. No idea why.
Of course, I also have no idea why the Bluetooth disconnects randomly, for no apparent reason.
The same Parrot CK3100 works 100% of the time with a Nokia E71-2, and it works 100% of the time with an old Motorola Q9h.
No idea what the freak is wrong w/the Xperia.
Both the Voice Command issue (25% failure) and the Bluetooth disconnection happens with both the X1a and the X1i that I just sold.
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
michaelthemage said:
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
Click to expand...
Click to collapse
I'm on the UK R2A that was dated 20 Feb 2009. Bluetooth is still buggy.
There still seems to be some occasion that the phone goes into some kind of standby mode that causes Bluetooth not to be instantly available, and no doubt this affects the performance of Voice Command.
But, having said that: There are still times that you know the phone's not in standby, and Bluetooth + Voice Command is still buggy. Sometimes the phone responds with the Xperia speaker, and sometimes the phone responds w/the car speakers, and there doesn't seem to be any rhyme or reason to it.
fmohiy said:
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
Click to expand...
Click to collapse
I did not have to do anything special to get it to work the way that I wanted, except to assign the right silver button to Voice Command.
Can anyone tell how to make voice command or voice2go work with bluetooth headset?
Can you use all the available commands of MSVC?
Hi all, I have also installed the MSVC on my Xperia and the voice dial feature works fine, but I have tried to use other voice commands (just say "help" for a list of available commands) like "What time is it?" and it doesn't work.
Has anyone else tried it?
Update: I figured it out: you have to enable the "Status" option in MSVC settings!
MS VC R3AA013 & Jawbone Prime
Hi All
Had MSVC 1.6 on my x1 (R2a), all working fine, just been given a Jawbone Prime (thought result), BT linked up no worries. Tried to use MSVC over BT & not a thing. Can make a call manually n Jawbone picks it up, can use VC on my phone n Jawbone will pick it up, but picking up my phone with a BT sort of defeats the object of the exercise. Have looked all over XDA, and get a mixed impression, does a BT headset work with an X1 & MSVC?
Tried a couple of registry tweaks & nothin & I've now updated to R3 to see if that makes a difference but no joy.
Have I missed something here? Or am I just special?
I missed something!
I was using the wrong button, gotta use the assassin button & not the talk button. D'oh.
Having same issue as original post. WM6.5 w/ voice command loaded. Can't get bluetooth headset to initate voice command prompt. I have had to attach it to one of the buttons on the phone - but not ideal b/c of the incoming handsfree laws here.
Any suggestions?
Ok so I'm having a similar problem here. I have the X1a with WM 6.1 and MS Voice command 1.6 and my bluetooth is a Nokia BH-212. My blue tooth has a volume rocker and one master button for all functions. My issue is that yes I can answer with my bluetooth by pressing once, I can hang up the same way. If I press twice quickly it redials the last number. However when I hold the function button for the right amount of time (you get a long tone) it is supposed to activate the voice command prompt but instead i simply get the dialer on my screen. No prompt, nothing.
I have looked into the phone as much as I can to try and find something with no luck. I am a newbie so please be gentle. I just want that feature to work and my phone will do almost everything I want it to. Thanks all