msvc over headset - Tilt, TyTN II, MDA Vario III General

has anybody got msvc working over headset? if so what are you using? the program I was using with the hermes doesn't work on the tilt. thanx

MSVC 1.6 works out of the box as advertised. No need for any Hermes hacks (chances are they'll break something).

I've mapped mine to the voice activation key (the one with the speach bubble) but it won't start with my BT headset.

msvc 1.6 doesn't work out of the box! when I hold down button on my headset the dialpad opens and I can hear the headset connect but the msvc doesn't start. I have added a 6 buton in the reg to replace ptt with the voice command.
goestoeleven said:
MSVC 1.6 works out of the box as advertised. No need for any Hermes hacks (chances are they'll break something).
Click to expand...
Click to collapse

Well, VC does work out of the box, but you probably need to re-map buttons. On the TyTN II, Button 6 was Voice Speed Dial, and I needed to change that. On the Tilt, it's PTT and you'll need to change that.
But once I made that change, it worked like a charm without any issues on my TyTN II. I'm using a Plantronics Discovery 655, which also might matter - perhaps deleting and re-partnering with your headset might help.
With PTT re-mapped to VC you're having a problem?

LuXx said:
has anybody got msvc working over headset? if so what are you using? the program I was using with the hermes doesn't work on the tilt. thanx
Click to expand...
Click to collapse
Give this a shot
http://forum.xda-developers.com/showthread.php?t=333260

I too have had no issues with MS Voice Command 6 on Kaiser. I was never able to get it to work reliably on my Hermes, but notifications and all commands work great over my BlueAnt headset. I currently don't have a button on the phone mapped to it, I only use the headset buton.

MSVC & Plan. 655
PerfAlbion said:
Well, VC does work out of the box, but you probably need to re-map buttons. On the TyTN II, Button 6 was Voice Speed Dial, and I needed to change that. On the Tilt, it's PTT and you'll need to change that.
But once I made that change, it worked like a charm without any issues on my TyTN II. I'm using a Plantronics Discovery 655, which also might matter - perhaps deleting and re-partnering with your headset might help.
With PTT re-mapped to VC you're having a problem?
Click to expand...
Click to collapse
I am using the same headset with the Tilt (Att Rom) and I am not very pleased with the BT setup. I do not get notifications through the headset like I used to; and with the BT ROM available, I have no way to click on announcements through the headset. One other problem is that now the reception distance with the 655 is about 6ft at best. Any recommendations on what I can change?
I may flash over to HTC ROM, but I am a little scared as to doing that plus I would have to re-install all my apps (I think).

LuXx said:
msvc 1.6 doesn't work out of the box! when I hold down button on my headset the dialpad opens and I can hear the headset connect but the msvc doesn't start. I have added a 6 buton in the reg to replace ptt with the voice command.
Click to expand...
Click to collapse
Sorry, I neglected to mention that I also completely disabled Cyberon VoiceDialer and disabled PTT before intstalling MSVC. Then it works out-of-the-box perfectly... even notifications!

On a Tilt, it did not work at first, but when I did the registry edit to allow for changing the PTT button, and set that button to VC, it works.

Thanks for pointing me in the right direction. Working great!
kavi said:
Give this a shot
http://forum.xda-developers.com/showthread.php?t=333260
Click to expand...
Click to collapse

Related

MS Voice Command 1.6 Retail runs on AKU3.2

FYI
Just installed MS Voice Command 1.6 Retail (1.60.4622.0) and it seems to run fine on my AKU3.2 1.3.2
Does it work over bluetooth handsfree voice dial activation?
Mr_Ding
do you use bluetooth handsfree to voice dial?
i have been trying to get it working with IIs with no luck (I use ITech mini II bt handsfree + XDA IIs)
If not, I guess Cyberon voice dialer is better than VC1.6 - less memory and very accurate.
cheers
No, haven't tried bluetooth handsfree.
I defined 1 hardware button as Voice Command, press it, then I say "Call Mary at home" for example.
Will try next week (have my BT headset at work, since I hardly use it)
joseph.sapri said:
Mr_Ding
do you use bluetooth handsfree to voice dial?
i have been trying to get it working with IIs with no luck (I use ITech mini II bt handsfree + XDA IIs)
If not, I guess Cyberon voice dialer is better than VC1.6 - less memory and very accurate.
cheers
Click to expand...
Click to collapse
Check this thread for a cab file that allowed me to get VC to work via BT...
http://forum.xda-developers.com/showthread.php?t=283412&page=5
more questions
ercave1,
Thanks for the info. I checked the forum and got the cab file. At the moment I have not tried it, however got some questions:
1. After installing VC1.6, wireless icon disappear from the tray... where has it gone? does it affect wireless funct? After uninstalling, the icon comes back... weird...
will try the cab later and give feedback...
cheers

Many asked why Voice Cmmd works well on 8125 but not Kaiser/tilt

There have been several threads where members have commented that Voice Cmmd 1.6 worked very well on 8125 but not on Kaiser/tilt (or on the 8525)- the problem is poor recognition through the phone mic (not through BT) - VC worked great on the 8125 but not on either the 8525 or the 8529/tilt. admittedly some say they do not have the problem but others do (as do I on both the 8529 and 8525)and I can not find any explanation - it seems like the mic is either too sensitive or not enough - I have tried switching the ACG mic to either enabled or disabled with no clear difference in performance of VC recognition
Sooo..
- does anyone have any ideas ?
- are there any ways to adjust the mic other than just enabling/disabling ACG?
THANKS!
I can add that Voice Commander does not support the Kaiser as well.
?Glitch
?Glitch said:
I can add that Voice Commander does not support the Kaiser as well.
?Glitch
Click to expand...
Click to collapse
It works fine on my Att Tilt, VC version 1.6, no worries.
Voice command works just fine on my unlocked TyTN II
greg3d said:
Voice command works just fine on my unlocked TyTN II
Click to expand...
Click to collapse
Same here - works great.
Bratag said:
Same here - works great.
Click to expand...
Click to collapse
Same experience. In fact, mine works much better than it ever did on my Eten M600 and until recently my Dopod 838 Pro over WM6 (aka HTC Hermes/TyTN). Do that note that I use mine with a BT headset with the TyTN II (Kaiser) and I no longer have to install hacks for it to work when the BT headset button is pressed. Everything works after first install.
I replaced my 8125 with a tilt. I had VC1.6 on both. it works the same on both. both work well. people just like to whine
It works great on my AT&T Tilt as long as I use my headset. When I don't it's pretty crappy, by luckily for me only time I want to use voice command is with my headset.
the people that are having problems should turn on AGC. i dont have to as it's usually quiet around me and I speak loud and slow, without mumbling
I'm wondering if those that are having no problems with Voice command are finding the same one issue I have found. The one feature that does not work for me is the caller Id annoucement in your BT headset when a call comes in before you answer it. The VC features list states this is a feature but it has never worked for me. How about you guys?
Voice Command works MUCH better on tilt / kaiser if you turn "ON"
automatic gain control in phone settings.
DLD
I have to agree. I had AGC off and I had trouble with voice command, I read a thread that said to turn it on and now I do not have any problems.
Strangely, in my limited testing, I got better results with it off.
I have tried VC1.6 both with and without hacks and I am unable to get it working from the BT headset button. Worked fine on my Hermes though (with hacks).
I guess I might need to do a hard reset but then i have to contact Tomtom to get a new ID licence from them

Anyone successful with VoiceCommand 1.6 and Parrot CK3100?

My Jabra BT500 works great, the CK3100 has nothing but trouble Parrot US support is being particularly unhelpful - curious if anyone has made it work or not.
This the stock AT&T Tilt ROM with the retail shipped VC 1.6.
Richard
the parrot itself is working for me, but my stereo (06 Saab 9-3) doesn't play well. VC does work, just not great but I believe that it's due to my car. I'm just using the Parrot's voice command
spartanrob said:
the parrot itself is working for me, but my stereo (06 Saab 9-3) doesn't play well. VC does work, just not great but I believe that it's due to my car. I'm just using the Parrot's voice command
Click to expand...
Click to collapse
Yeah, that's Parrot USA's "solution" - but MS Voice Command is soooooo much better I can't go back. I'll literally change BT car kits first
Did your Parrot work with other phones previously? My CK-3100 in this car ran great with my Hermes/8525 - the Tilt sets it atwitter though.
Richard
My parrot has been consistent among all phones, it's really more of an issue with the stereo in the Saab. Ask me again in 6 months when my lease is up and I move the parrot to a new vehicle
My CK3100 works fine with TyTN II and Voice Commander 1.6
"What is my battery level" , "What song is this" etc
...very cute !
eegboplegin said:
My CK3100 works fine with TyTN II and Voice Commander 1.6
"What is my battery level" , "What song is this" etc
...very cute !
Click to expand...
Click to collapse
Would you mind telling me some things about your setup?
Sounds like you're running the stock HTC ROM?
What revision Parrot firmware are you on?
What's the full version of your Voice Command? 1.6.xxxx <- what's the xxxx
Stupid but obvious question - have you tried making a voice-dialed call and then trying another VC operation? E.g. press Green button on parrot, "Call voicemail at work" have call progress, press Red button on parrot, wait a moment, then press Green button again and try something like "What are my appointments tomorrow?"
Thanks a million!
Richard
when you say it works well, does that mean that sound is routed through carspeaker?
when I press green button and say 'what time is it' I get the answer only through Tytn loudspeaker
Let me give a tip I found for my Parrot CK3000 & VoiceCommand.
If you have any voicetags in your Parrot... it won't pass the ball to VoiceCommand.
So I just wiped its memory (it's Green+Red on mine) then just paired it once more with my kaiser, and stop here! (do not save any contacts/voicetag in the kit)
At this point, when you'll press the Green button, it will get the VoiceCommand prompt
thanks Sebbes (I did that already).
But will the audio be routed to the carspeaker?(or still through the phones inbuilt speaker?)
VoiceCalls : yes (VC invit, and your actual calls)
Any other audio : no (like GPS voices etc)
I have installed two versions of 1.6 on my Tilt. The newest one fixes the announcements but seams to break BT voice command.
The announcements don't work on the older one but BT voice command does.
I will live without announcements...
Later, Lew
P.S. Working BT Voice command v1.60.4622.0
lewcamino said:
P.S. Working BT Voice command v1.60.4622.0
Click to expand...
Click to collapse
Thanks, which Parrot kit and which f/w revision on it?
Richard

MS VoiceCommand over BT Headset

Alright, I'm probably going to get flamed to high-hell for this one, but I know someone must do this, and I did a search but it matched on a whole crapload of posts, and I didn't want to go through every single page, so sorry.
Anyway, I have a bluetooth headset and MS VoiceCommand 1.6. I'm trying to make it so that I can give voice commands (such as calling someone) over the headset, and possible hear the announcer over the headset as well. Can someone PLEASE steer me in the right direction.
TIA
Not sure what you need. Install it, make sure your headset is paired, either activate voice command on the phone itself and give instructions (I have mine mapped to "hold PTT - Button 6") OR when I push my multi function button (Blue Ant Z9), the voice command beeps...I then state "Call John Smith" - Voice command responds with either "Call John Smith?" (If I have only one number for Smith) or "Call John Smith Mobile or Business". Then answer the question either 1) yes or 2) mobile. Voice Command dials. You can find all the available instructions in your documentation or at the Voice Command site. Let me know if you have any other issues. I'm a total newbie and it was pretty easy to get used to it and I love the program now.
yeah you would think it would be that easy, but I just cannot get it to work. The BT works, and VoiceCommand works, but they don't work together....strange.
Yep, was 'automatic' for me too. as soon as i recorded voice tags for my contacts i just hit the command button on the headset, wait for the prompt and say the name. it is played back and then the number dialled.
sweeeeet.
quote from another post here:
"Here is what I did:
1. Open BT Voice Command Config from Programs. Uncheck XCSdm
2. I put in 2 strings under HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand
Default = "\Program Files\Voice Command\voicecmd.exe"
Path = "\Program Files\Voice Command\voicecmd.exe"
I put "" around the strings - and the voicecmd.exe is SMALL case voicecmd not VoiceCmd.exe
3. Deleted the other keys under VoiceCommand
4. deleted the BT headset pairing - the paired jawbone headset again... perfect.
;-)
Don't know if you need both reg entries... but it is 5 am here... i have been up all night trying to fix this... Happy now."
http://forum.xda-developers.com/showthread.php?t=333260&page=15
schwags said:
yeah you would think it would be that easy, but I just cannot get it to work. The BT works, and VoiceCommand works, but they don't work together....strange.
Click to expand...
Click to collapse
Sorry for the totally simplistic answer. Thought you just didn't get how to work it (been working with someone who is totally clueless on this locally). I think the above thread should provide the help for you. Also, try a reinstall. Mine wasn't automatic at first. When I reinstalled after I flashed my first ROM, worked fine.
I had some problems at first getting voice command to work with my bluetooth headset. If you paired your headset before installing voice command, unpair and re-pair the headset with the phone. Hopefully that will work. Also, make sure your phone isn't set to vibrate or mute. This may cause voice command to work, but you can't hear the voice prompts.
Try the Bluetooth extensions from JetWare. I have seen that take what I considered to be a useless headset into one that works quite well.
I have been thru MANY dozens of headsets and I have come to the conclusion that in this case more than most...you get when you pay for.
Hence, I have the Jawbone and the Sony Ericsson HBH DS980. Both work great.
Brad
Brad- I am also have a ds980. It works fine with voice command. However I have problems in that it often seems to drop the bluetooth connection after a call or as I am initiating a call. I can press the play button and it eventually reconnects. It works fine for listening to music and never just drops the connection. Have you had any issue with this? If so what did you do to resolve it?
Alright, just got it working guys! The post above from kaluzu doesn't fully work, however it contains the original post where I found the full fix. First I did what was in the kaluzu post.
And then I did this:
Originally Posted by Edvard_Greig
Hallelujah! I finally figured it out- so it did have to do with the XCSDM setting I believe... so here is what I did for anyone else that is wondering:
1. Installed MSVC 1.6 (from the link in the TNT ROM posted earlier)
2. Soft Reset
3a. Made registry change to set Path = \Program Files\Voice Command\voicecmd.exe (no quotes)
3b. Change button assignment (assigned to Button 6/PTT in my case)
4. Soft Reset
5. Enable XCSDM
6. Soft Reset
7. Disable XCSDM
8. Soft Reset
9. Pair Bluetooth Headset
It seems to be working...the best I can figure is that when it initially gets installed the XCSDM doesn't have any value at all, but by enabling it, and then disabling it, it actually turns it off as opposed to having a null value. Also note that since I am using Alex's 'UltraClean' ROM, there were never any Cyberon installation traces, and therefore I ignored those sections.
In any case it seems to be working great and I'm very happy.
Thank you everyone for all your help, and hopefully what I listed above will help someone else.

voice dial through bluetooth headset?

Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
I use Voice Command, that allows voice dialling through my Jawbone Headset.
fmohiy said:
Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MSVC does by replacing the the dll with it's own.
My rom also does by replacing dll from HD.
Me too, I use MS Voice Command with SonyEricsson HBH sets and all work by pressing the button on headset which brings up the mic from voice command to command-the-phone
fmohiy said:
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MS Voice Command 1.6 here. It works about 75% of the time. Sometimes it doesn't work. No idea why.
Of course, I also have no idea why the Bluetooth disconnects randomly, for no apparent reason.
The same Parrot CK3100 works 100% of the time with a Nokia E71-2, and it works 100% of the time with an old Motorola Q9h.
No idea what the freak is wrong w/the Xperia.
Both the Voice Command issue (25% failure) and the Bluetooth disconnection happens with both the X1a and the X1i that I just sold.
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
michaelthemage said:
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
Click to expand...
Click to collapse
I'm on the UK R2A that was dated 20 Feb 2009. Bluetooth is still buggy.
There still seems to be some occasion that the phone goes into some kind of standby mode that causes Bluetooth not to be instantly available, and no doubt this affects the performance of Voice Command.
But, having said that: There are still times that you know the phone's not in standby, and Bluetooth + Voice Command is still buggy. Sometimes the phone responds with the Xperia speaker, and sometimes the phone responds w/the car speakers, and there doesn't seem to be any rhyme or reason to it.
fmohiy said:
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
Click to expand...
Click to collapse
I did not have to do anything special to get it to work the way that I wanted, except to assign the right silver button to Voice Command.
Can anyone tell how to make voice command or voice2go work with bluetooth headset?
Can you use all the available commands of MSVC?
Hi all, I have also installed the MSVC on my Xperia and the voice dial feature works fine, but I have tried to use other voice commands (just say "help" for a list of available commands) like "What time is it?" and it doesn't work.
Has anyone else tried it?
Update: I figured it out: you have to enable the "Status" option in MSVC settings!
MS VC R3AA013 & Jawbone Prime
Hi All
Had MSVC 1.6 on my x1 (R2a), all working fine, just been given a Jawbone Prime (thought result), BT linked up no worries. Tried to use MSVC over BT & not a thing. Can make a call manually n Jawbone picks it up, can use VC on my phone n Jawbone will pick it up, but picking up my phone with a BT sort of defeats the object of the exercise. Have looked all over XDA, and get a mixed impression, does a BT headset work with an X1 & MSVC?
Tried a couple of registry tweaks & nothin & I've now updated to R3 to see if that makes a difference but no joy.
Have I missed something here? Or am I just special?
I missed something!
I was using the wrong button, gotta use the assassin button & not the talk button. D'oh.
Having same issue as original post. WM6.5 w/ voice command loaded. Can't get bluetooth headset to initate voice command prompt. I have had to attach it to one of the buttons on the phone - but not ideal b/c of the incoming handsfree laws here.
Any suggestions?
Ok so I'm having a similar problem here. I have the X1a with WM 6.1 and MS Voice command 1.6 and my bluetooth is a Nokia BH-212. My blue tooth has a volume rocker and one master button for all functions. My issue is that yes I can answer with my bluetooth by pressing once, I can hang up the same way. If I press twice quickly it redials the last number. However when I hold the function button for the right amount of time (you get a long tone) it is supposed to activate the voice command prompt but instead i simply get the dialer on my screen. No prompt, nothing.
I have looked into the phone as much as I can to try and find something with no luck. I am a newbie so please be gentle. I just want that feature to work and my phone will do almost everything I want it to. Thanks all

Categories

Resources