Hi everyone!
Sad thing happend with me, 4 days ago i fell into a river and sadly ma diamond was in the pocket. I dryed it for three days, turned it on, everthing else works, besides the screen light. So i dissambeled the phone to bits and pieces, only i didn't took the LCD out(read it from somewhere that you can't put it back on afterwards so it will work). I reassambeled it and still same situation. If you look it from a angel you can see the icons and even touchscreen works. Only problem is still the backlight. So is there something i can do to make the backlight work again or i have to buy a new screen and is it hard to swap the screen ?
Hi,
Not sure if you will need to replace the screen, if you can get to the power settings you can see if the backlight has been manually turned down. If this fails and a screen replacement is required i will tell you how easy/difficult it is once i have replaced mine, due to unfortunate circumstances.
yeah, i got into the power settings, everthing is okey there like it should be , so i have to change the screen. Is there some kind on intrcutions for changing it? it would help me a lot
Related
About a month ago I got my Kaiser screen replaced as it was broken, now all of a sudden the screen is all whitish and I can hardly ready whats on it!
Is the screen broken again??
I'm fixing to replace the screen in a Kaiser i bought used with a broken screen. From the reading i've done, it sounds like one of the cables to the screen is loose. Trying pressing on the middle of your keyboard and see if anything happens. The big ribbon cable has a connector there.
hmmmm coming to think of it when I pressed the middle of the screen it used to do some funny effect (like when you press your TFT monitor) but now nothing happens!
Is your screen something like this?
jrask said:
Is your screen something like this?
Click to expand...
Click to collapse
last night i was woken up by a text, i looked at my phone and all of a sudden the screen went crazy. Started scrolling up and down (like a bad signal/wrong format ntsc/pal on a tv). Everything got all messed up and lines and dashes all over, kinda like your screen, it started acting wierder when i began applying pressure on the top of the device by the earpiece and d-pad. So i soft-reset the device and it was still doing it while boot up, leading me to believe it wasn't a software issue.
So in my half awake state i just left it on my nightstand. I woke up and its perfectly fine now, even when i press all around the screen.. wierd huh?
I didn't notice anything like you descriped, touch screen and everything else worked like before. Only the colors were like on the picture. Tried hard reseting but didn't help. Phone is still under warranty so sent it to be repaired, i can post what they did when i get it back.
Thanks jrask. Thats exactly how it looks.
I think i have some bad news for you, the screen was damaged and needed to be replaced. I think it was cracked under the frame.
Well ive had my phone for a while with hyperdragon iv iolite working completely fine without any hardware or software issues for months. Today i took out the battery of the phone, and put it back in and turned it on, but when the phone turned on, the touch scrren is not responding to anything. everything works fine with all the buttons and keyboard, but the touchscreen isnt working. What could have gone wrong just by taking out the battery. I also havnt dropped or damaged the phone in anyway so i dont see it being a hardware problem. Thanks. I really need help
I have heard of people who has been able to solve this problem by hard resetting the devise. I have had not such luck....comes to be that from sliding wear and tear the connector to the screen gets damaged. My screen is completely disable, I found someone that was able to buy a second hand phone on ebay and was able to switch the connector. Looks like to much of a hassle to me, so Im sticking with this until I switch phones.
Hey guys, I was wondering if somebody would be able to maybe help me diagnose the fault\problem part with my non-working diamond...
Basically I went to a club one night and the place was unbelievably steamy / humid. My phone was working one minute and then the next it wouldnt display anything on the LCD. The backlight was working however.
Since then I havent been able to get an image on the screen although when trying to turn it on, it seems to go through its startup sequence (backlight -> vibration -> beep (i think))
I havent had any power to the phone since a day after it broke (a few weeks ago).
I'd like to get it back working again but dont know exactly what part i would need to replace. I'm fairly competent with electronics .
Any help/advite would be appreciated!
Haha, ok that's odd...
I've plugged it into my pc to get some data files off about an hour ago.. forgot about it and just looked at it now and the screen is displaying!
It is displaying and accepting input although it was flickering at first (like pixel shifting). but i pressed the power button to standby the screen and pressed it again and the display is fine with no flickering ?
Ive moved the phone about and shook it quite hard to see if there's any loose connection but the display still seems fine..
Anybody have any ideas as to what it may be?
I'm not going to deem it as fixed until I know what the problem was/is lol
cheers guys
Ok screen actually keeps flickering nonstop, and sometimes 'fades away' to gray/white/black
comes back after a few seconds though
Looks like a faulty connector?
So my Screen broke and I bought a new one so I could replace it, the touch screen/digitizer didn't break though... at first the colors just started washing and fading untill the screen ended up completely dark, I could still use the touch screen and feel when I would unlock it, after a day the phone would not give me any feed back by vibrating or turning the orange light while charging, so I dismantled it using some tips from these videos:
http://www.youtube.com/watch?v=Hhj8Xs9vAyg
http://www.youtube.com/watch?v=hTRXSMQ-GJY&feature=related
After I put everything back together the phone is giving me feedback again and I can notice its charging because of the orange light, but the screen won't turn on. Does any one know if I might need to do something on the software side? like needing to re install anything? or do you think I just got a bad screen?
Update: I just took it apart again and reconnected the ribbons, its back together and the screen still won't turn on.
You have the AMOLED screen and not the LCD?
Did you compare the #'s on the old and new to see you got the right part?
Cables are the same, they look the same, part # and stickers are different...
What are the part numbers on your new and old screen? I just went through the same thing, but I'm fairly sure I got the wrong screen replacement. Will have to look more into it later tonight.
My screen wont turn on at all. I was so excited to get my N1 back in action as well.
Hello everyone,
I have got one problem... I broke digitizer of my HTC Desire 500. So I order new one and to be sure, also LCD screen. I replaced, and...
After turning on, everything works fine. Digitizer works properly, screen shows normal picture. But after few minutes - restarts (I don't remember well) backlight of my screen goes down and now it have no backlight at all. I rebooted phone many times, I remounted screen and digitizer to be sure that connections are fine - but no results. I restored factory settings of phone with no effect too. :/
Please help, what happend? What could be the source of problem? I don't want to order new sceen if it could beak too ;/ I read other threats about coil problem in other HTC, but I cannot find any coil in my Desire's motherboard (maybe it is hidden under plate that covers CPU and other parts). I performed tests of light sensor and it works fine. Buttons lights fine too. The problem refers only to LCD screen, and backlight doesn't respond during test.
Anyone help?
same situation
Hello kowal_luki,
I'm just in the same bad situation.
After a bad fall of the phone the screen broke so I ordered a new one for replacing it.
Opening the phone I noticed that also the LCD (and not only the external screen) was broke so had to order also the LCD.
As precaution tried to power-on my device without a complete assembly and everything seemed to be fine, so I decided to glue the LCD to the outer screen (the touch screen) with a LOCA TP-2500 glue.
Then I re-assembled it up: at first the image was a little bit disturbed but the back-light was working; after few second the back-light turned off. I checked the cable, after that the image went perfect but the back-light still dead.
Did you find a solution for this -still not explanable- problem?