So my Screen broke and I bought a new one so I could replace it, the touch screen/digitizer didn't break though... at first the colors just started washing and fading untill the screen ended up completely dark, I could still use the touch screen and feel when I would unlock it, after a day the phone would not give me any feed back by vibrating or turning the orange light while charging, so I dismantled it using some tips from these videos:
http://www.youtube.com/watch?v=Hhj8Xs9vAyg
http://www.youtube.com/watch?v=hTRXSMQ-GJY&feature=related
After I put everything back together the phone is giving me feedback again and I can notice its charging because of the orange light, but the screen won't turn on. Does any one know if I might need to do something on the software side? like needing to re install anything? or do you think I just got a bad screen?
Update: I just took it apart again and reconnected the ribbons, its back together and the screen still won't turn on.
You have the AMOLED screen and not the LCD?
Did you compare the #'s on the old and new to see you got the right part?
Cables are the same, they look the same, part # and stickers are different...
What are the part numbers on your new and old screen? I just went through the same thing, but I'm fairly sure I got the wrong screen replacement. Will have to look more into it later tonight.
My screen wont turn on at all. I was so excited to get my N1 back in action as well.
Related
Hello,
I have the htc 8925. a couple of weeks ago, my screen turned whitish blue. it completely washed out... i did a soft reset and it came back to normal. however a couple of days later, it happened again... i took out the battery, let it rest, and all was fine... but the white screen came back.
this is my problem. if the white screen were permanently there, i would have no issues with buying another screen. but it seems as though this is a "connector" issue and not my screen. sometimes, i just tap the screen and it turns white, i tap it again and it goes back to normal.
i have browsed through all of Mike Channon's posts and his website, i have dismantled my phone twice. everything seemed secure.... what would help me is if anyone knew exactly where the connector issue for the white screen on the kaiser where coming from.
i would appreciate all responses from anyone, expert or not. i dont want to buy a new screen because it seems as though my screen is fine, but just placed wrongly.
thanks again
Jennifer
also
i just noticed also that when i apply pressure to the lower right corner of the screen, the white screen goes away, but when i let go, it comes back... just wanted to add that
Had the same thing happen to a Tilt I bought from AT&T on the second day. Not sure what was wrong with it but they just sent me a new one. From my reading it seems to have something to do with the flexible video cable.
Hi everyone!
Sad thing happend with me, 4 days ago i fell into a river and sadly ma diamond was in the pocket. I dryed it for three days, turned it on, everthing else works, besides the screen light. So i dissambeled the phone to bits and pieces, only i didn't took the LCD out(read it from somewhere that you can't put it back on afterwards so it will work). I reassambeled it and still same situation. If you look it from a angel you can see the icons and even touchscreen works. Only problem is still the backlight. So is there something i can do to make the backlight work again or i have to buy a new screen and is it hard to swap the screen ?
Hi,
Not sure if you will need to replace the screen, if you can get to the power settings you can see if the backlight has been manually turned down. If this fails and a screen replacement is required i will tell you how easy/difficult it is once i have replaced mine, due to unfortunate circumstances.
yeah, i got into the power settings, everthing is okey there like it should be , so i have to change the screen. Is there some kind on intrcutions for changing it? it would help me a lot
About a month ago I got my Kaiser screen replaced as it was broken, now all of a sudden the screen is all whitish and I can hardly ready whats on it!
Is the screen broken again??
I'm fixing to replace the screen in a Kaiser i bought used with a broken screen. From the reading i've done, it sounds like one of the cables to the screen is loose. Trying pressing on the middle of your keyboard and see if anything happens. The big ribbon cable has a connector there.
hmmmm coming to think of it when I pressed the middle of the screen it used to do some funny effect (like when you press your TFT monitor) but now nothing happens!
Is your screen something like this?
jrask said:
Is your screen something like this?
Click to expand...
Click to collapse
last night i was woken up by a text, i looked at my phone and all of a sudden the screen went crazy. Started scrolling up and down (like a bad signal/wrong format ntsc/pal on a tv). Everything got all messed up and lines and dashes all over, kinda like your screen, it started acting wierder when i began applying pressure on the top of the device by the earpiece and d-pad. So i soft-reset the device and it was still doing it while boot up, leading me to believe it wasn't a software issue.
So in my half awake state i just left it on my nightstand. I woke up and its perfectly fine now, even when i press all around the screen.. wierd huh?
I didn't notice anything like you descriped, touch screen and everything else worked like before. Only the colors were like on the picture. Tried hard reseting but didn't help. Phone is still under warranty so sent it to be repaired, i can post what they did when i get it back.
Thanks jrask. Thats exactly how it looks.
I think i have some bad news for you, the screen was damaged and needed to be replaced. I think it was cracked under the frame.
last night my x1s screen was going all fuzzy like different colours and cut out a few times. now today notthing. the screen is blank. backlight comes on i think. the phone starts up normal as i can hear the start up sound and i can accept calls. i think this is failure of the felx cable. Is this true? and if so is i worth get on and fiting it myself or going to a repair shop. im on the cheap here so any fix will do.
rocklobster666 said:
last night my x1s screen was going all fuzzy like different colours and cut out a few times. now today notthing. the screen is blank. backlight comes on i think. the phone starts up normal as i can hear the start up sound and i can accept calls. i think this is failure of the felx cable. Is this true? and if so is i worth get on and fiting it myself or going to a repair shop. im on the cheap here so any fix will do.
Click to expand...
Click to collapse
I have had the second part of your problem before where screen doesn't come on but the back light and everything else works. A couple of months back when I was at college I dropped my phone really hard at a party( I was wasted ) and the next morning the screen wouldn't come on. So what I did was I looked up the guide to how take the X1i apart and luckily one of my buddies had the same screwdrivers that I needed because he uses it on his the Blackberry Storm 2. So what I did was went to where the Flex ribbon cable was located unattached it, then reattached it, and put my phone back together and the screen came back on and still works to this day. If this helps press thanks.
http://forum.xda-developers.com/showthread.php?t=535664
i'm having a Problem too.
the to lines in the top of my screen are blue ^^
i think its a problem with the connection, but as it isn't really big and i don't have a newer phone i will dissasemble it later ;-)
please replace the * with t,or copy it without h**p:// (can't post outside links yet ^^)
h**p://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/296861_222070397844215_100001237692896_682738_4498500_n.jpg
So, I was trying to replace my Nexus 5s camera and I disassembled the main motherboard. Replaced my camera and everything but after I reassembled the phone, I found out that there's no display. The LEDs work fine, because I see them light up and I see that the screen is black but it's a bright black and the screen is on. So after tampering with it, I found that the little USB charger port wire board wire thst connects just above the battery (idk how to describe it, its the orange strip that locks the battery in place) had a direct correlation with the display. If I unplugged it, the screen would go dark and off. If I replugged it, it would be on again. After doing this a few times, I actually got my phone's display to show for a little while before it went away to black again. So will buying a new orange strip part work or would I have to go to the bottom where the little screen digitizer is? I'm sorry if the problem is unclear because I really don't know how to say it or explain any better. Please help.