Hi,
i tried rooting following the guide Here and it was ok until i had to start and run update.zip i just got a message saying it doesnt exist and since then i have not been able to boot, it goes straight into system recovery.
i did this about an hour ago and have been looking for a solution since and i cant find one on how to reflash my phone back without the need of transfering files as my computer wont recognise the phone other then in odin.
please help
EDIT: please ignore problem solved
i followed the flash part of http://forum.xda-developers.com/showthread.php?t=769400
I dont know whether i have asked a dumb question or not but i've searched for all the forum, it's all "discussing" and too much scattered thing that i still cant see the specified way for my phone.
Yes, again this question, I tried to flash Energy Rom on my phone, by USB and by SD card, everytime i reboot or turn off my phone, i will need to connect through USB to boot on, or not it will display tri-color screen and flash No Image File. I copied the image file to SD card and now when i boot the phone it tell me to update the rom on SD card... And if i delete this image on my SDｃａｒｄ then...it's again, nothing too much to say...
Is there any way to let my phone boot on without USB wired and no tri-color screen (i guess i hate that much).
Hope getting help from you all, and please tell me step by step, i'm newbie anyway, please.
By the way, anything related to mtty or HardSPL, SoftSPL i still dont work it out. Please give me some tips.
xgenvn said:
I dont know whether i have asked a dumb question or not but i've searched for all the forum, it's all "discussing" and too much scattered thing that i still cant see the specified way for my phone.
Yes, again this question, I tried to flash Energy Rom on my phone, by USB and by SD card, everytime i reboot or turn off my phone, i will need to connect through USB to boot on, or not it will display tri-color screen and flash No Image File. I copied the image file to SD card and now when i boot the phone it tell me to update the rom on SD card... And if i delete this image on my SDｃａｒｄ then...it's again, nothing too much to say...
Is there any way to let my phone boot on without USB wired and no tri-color screen (i guess i hate that much).
Hope getting help from you all, and please tell me step by step, i'm newbie anyway, please.
By the way, anything related to mtty or HardSPL, SoftSPL i still dont work it out. Please give me some tips.
Click to expand...
Click to collapse
Firstly, you have not written what happens to you very clearly...its is all very confusin..from what i understand, your phone boots only if you connect it to the PC via USB...With WHAT METHOD did u FLASH your phone for the FIRST time??
Im also no expert, but i wil make an attempt...what is ur current status...does your phone start at all??
circleofomega said:
Firstly, you have not written what happens to you very clearly...its is all very confusin..from what i understand, your phone boots only if you connect it to the PC via USB...With WHAT METHOD did u FLASH your phone for the FIRST time??
Im also no expert, but i wil make an attempt...what is ur current status...does your phone start at all??
Click to expand...
Click to collapse
As i pay attention to the bootloader, i'm sure that it's already made the HardSPL and the phone can recognize the image on the SD Card or by USB method. The first ROM was flash on the phone is not me, this is my friend's phone, I'm just trying to help him around then.
I tried to flash the rom by USB method, but when i restarted the phone without the USB connected to PC, it did show the bootloader (i just touch the power button, not volumn button or any other key)~ then i plug USB which connect the phone to pc, soft reset it and it boot to the system again.
I try to flash it by SD-card method but it still the same. I mean that the phone can be flashed new ROM, but it's just keeping get into the bootloader everytime i restart the phone
If the image is on the SD Card it'll tell me to upgrade ROM, if the image is not on the SD Card then "No Image File!" was flashed on~
Any ideas? My friend tells me that this happened when he tried to install Sogou - chinese input application. Is there any conflicted that cause this matter?
for little detail, the phone always shows up Successfully, but it still enter the bootloader mode at next restart. Is my flash-job done or just a mistake one?
additionally, this may be bad... remove the battery doesnt work. Please help.
help me please, do i have to hardspl again? I still cant enter WM unless i have a usb wire connected phone to pc and softreset it. Any idea?
xgenvn said:
help me please, do i have to hardspl again? I still cant enter WM unless i have a usb wire connected phone to pc and softreset it. Any idea?
Click to expand...
Click to collapse
hm, since you said the first flashed job was not yours, i think it's better that you repeat the whole procedures again starting from hardspl. but make sure you're using the correct version. re-download again if you're not sure.
also while most people rarely done so, it's bad to have multiple rom image exist in any root folder in your phone, storage card and your pc flashing tool folder (.nbh, .rom, etc), but sometimes people do forget or **** just happens.
I recommend that you remove both sim & microsd card before going any further.
then try to boot into wm with usb cable connected like you said.
take a quick look at folder and file structure in the rom. from here i would do it slightly different than others, with no battery pulls, just using the reset button. (imho, every battery pull may cause unforeseen damage especially with power still running.)
a. push hard reset combo button (don't let go) and push reset for a few secs to hard reset.
b. after hard reset rebooting the phone, push bootloader/rom update combo buttons and hit reset for a few sec. remember to keep pushing those buttons while you release the reset pin.
c. reflash hardspl, repeat step b, reflash rom. allow rom to finish doing its job. some rom may go to sleep while installing/customizing, don't let that happend.
d. just do random thing like play a game or whatever for a few minutes or more. then soft reset or power down.
e. turn on phone and wait, if problem's solved. if it is, hard reset again. continue as usual. if it's not, try other rom (ask people for md5 checksum, compare with your download). if none works, find more help.
D-jack said:
hm, since you said the first flashed job was not yours, i think it's better that you repeat the whole procedures again starting from hardspl. but make sure you're using the correct version. re-download again if you're not sure.
also while most people rarely done so, it's bad to have multiple rom image exist in any root folder in your phone, storage card and your pc flashing tool folder (.nbh, .rom, etc), but sometimes people do forget or **** just happens.
I recommend that you remove both sim & microsd card before going any further.
then try to boot into wm with usb cable connected like you said.
take a quick look at folder and file structure in the rom. from here i would do it slightly different than others, with no battery pulls, just using the reset button. (imho, every battery pull may cause unforeseen damage especially with power still running.)
a. push hard reset combo button (don't let go) and push reset for a few secs to hard reset.
b. after hard reset rebooting the phone, push bootloader/rom update combo buttons and hit reset for a few sec. remember to keep pushing those buttons while you release the reset pin.
c. reflash hardspl, repeat step b, reflash rom. allow rom to finish doing its job. some rom may go to sleep while installing/customizing, don't let that happend.
d. just do random thing like play a game or whatever for a few minutes or more. then soft reset or power down.
e. turn on phone and wait, if problem's solved. if it is, hard reset again. continue as usual. if it's not, try other rom (ask people for md5 checksum, compare with your download). if none works, find more help.
Click to expand...
Click to collapse
I've just tried out the task29, it's done normally, then flash the new rom.
1. I dont think the rom are buggy, because i changed between 2 roms and it's the same matter.
2. I dont need to use bootloader/rom update combo button because it's directly entered whenever i turn on the phone (without connected to pc) (i really really dont know why)
3. Hard reset and i have my WM work again but it's still the romupdate at boot time.
I wonder if jumpSPL did all this problems, I tried mtty by task 0 and set 14 0 but it wont restart the phone, tried to format the ROM by mtty (task 32) but it wont weep out, errors given: bad... at address...
Why does it always want me to update the ROM? Is there anything wrong with jumpSPL?
the problem still, please help me give a look to this.
ouch, last time I use mttty were ancient wm2003 era. i'll try to look for info, but can't promised anything.
at this point it's recommended to reflash the complete original stock rom, undo hardspl.
check the hardspl thread about restoring to factory default. best luck to you.
So..i finally got mtty working. I don't really know how but i got it working despite the code 10 error while installing.But i decided to install the rom thorugh custom RUU after the task 29 format. So i did everything the mtty tutorial said but now, i can't flash the custom ruu.Whenever I try, it gives me 240 error. I cannot access my internal storage, activesync will not recognize my phone. I cannot boot into anything it gets blocked at the Touch Diamond screen. Did a hard reset..nothing worked. Please help me with a solution! i just want to flash a rom onto it so i can use it. Momentarily I can't do nothing with it...
EDIT : GOT IT! I had to reinstall the official rom back. after that everything back to normal.
Hey guys, I've encountered quite the problem with my N7.. I was flashing PA onto it, and it didn't work out, so I tried going back to what I had before, but my folders had gotten all messed up for some reason, and long story short, whenever I flash a new ROM while factory resetting, it doesn't work (can't access folders, can't connect via usb (or when I can I can't edit files or move stuff onto there), managed to get a file manager installed but when I put my CWM backup in the right spot it wouldn't restore.. **** hit the fan), and I can't get my computer to recognize it in fastboot mode, help?
For the record at this point I'm okay with relocking the bootloader and unlocking it for a full and complete wipe, but it won't even let me do that much..
Nvm finally with the help of a toolkit i got fastboot to reply... guess it just needed to be polled a bunch of times, was really weird :S
So, basically, i have ****ed up my device. it wouldnt boot after i did a reboot(using the ressurection remix ROM from this forum), so, i have tried to restore a backup and it didnt work(forgot to wipe everything) now, i can boot into TWRP but the screen wont response, i have tried to boot into TWRP via ADB but nothing works, im just stuck on that put password screen, any sugestions?
Did you remove the system password/lockscreen before upgrading?
If not, can you get in to twrp file manager?
As far as I can see with my limited knowledge you may need to remove the password lock in twrp file manager.
If that is it, you'll need to do some searching.
As long as the phone does something, there is still hope
SvenHee said:
Did you remove the system password/lockscreen before upgrading?
If not, can you get in to twrp file manager?
As far as I can see with my limited knowledge you may need to remove the password lock in twrp file manager.
If that is it, you'll need to do some searching.
As long as the phone does something, there is still hope
Click to expand...
Click to collapse
So, ive no acess to TWRP at all, cant reinstall it and cant acess anything on it because the screen wont work(the problem is NOT with the display itself), i cant even do that slide thing to unlock the screen when it turns off.
I did some research and i couldnt find any way to delete that password without root acess(looks like ive lost it during the **** ive done), so to try this you have told me, i have to root my cellphone totally from ADB, without doing anything on recovery, any ideas?
Update1: remembered the simple pull comand and were able only to pull locksettings.db, twrp still asks for the password.
Update2: ive managed to install the stock recovery and then flash TWRP again, now its working. THX for all!
Videiraa said:
So, ive no acess to TWRP at all, cant reinstall it and cant acess anything on it because the screen wont work(the problem is NOT with the display itself), i cant even do that slide thing to unlock the screen when it turns off.
I did some research and i couldnt find any way to delete that password without root acess(looks like ive lost it during the **** ive done), so to try this you have told me, i have to root my cellphone totally from ADB, without doing anything on recovery, any ideas?
Update1: remembered the simple pull comand and were able only to pull locksettings.db, twrp still asks for the password.
Update2: ive managed to install the stock recovery and then flash TWRP again, now its working. THX for all!
Click to expand...
Click to collapse
Hey there can you please tell me how you managed to install stock recovery ??