Related
Hello,
I was today handed a fried XDA 2.
My boss had attemted to flash it and it failed for whatever reason.
Now i will say from the outset that i have only ever flashed my XDA1 with a XDA-Developers ROM and it was a breeze.
The ROM file HE flashed with was called.
Xda_II_Upgrade_v16050.exe
Now when you switch the thing on.. all you get is a a small amount of txt saying
'Serial'
'v1.06'
and nothing else..
What have i done? Well i have sifted through the articles on here.. and found this rom
XDA-developers-SER-v12.exe
I have installed this on an SD card using xdatools.. WHOLESALE.. i.e. no moding of the files...
I have looked at 'http://wiki.xda-developers.com/wiki/HimalayaRomFlashing'
but as i can boot into the device.. i cant get the info it requires.
I am open to any and all help. And I'll even buy you a pint!
I am really at a lose.
Thanks in advance Guys and Girls.
It may not be as bad as you think.
It is in bootloader mode - currently in Serial mode and if you put it in a cradle connected to a PC (with ActiveSync installed) the bootloader should change to USB v 1.06. From this point you should be able to load a normal ROM from the manufacturer.
I have an i-mate, so am not sure what the current ROM version for the XDA II is, but I'm sure others will chime in with this information.
I upgraded to this version, not knowing I already had this loaded. You need to check the extROM version before upgrading as this appears to be way the official upgrades seem to change.
I had no problems and it was done through the Active Sync process
The file can be found here if you haven't already got it... http://www.my-xda.com/downloads.html
Try it again. It does take about 90 mins.
Regards
Nope... Nadda... Zip... Zilch.
Roit...
When i dock the pesky thing in the USB craddle.. it does display USB and v.1.06.
Activesync shows NO sign of knowing the XDA is there.
The ROM found at http://www.my-xda.com/downloads.html as suggested by flintanis fails with a ERROR 100: MODEL ID ERROR.
BRosenow what do you mean by 'load a normal ROM form the manufacturer' is that not what i have just tried?
Once again a pint for all contributors.. and my first born to the dude with the solution.
Cheers.
ActriveSync won't activate because it's in Boot loader mode but you can download the latest ROM Update from the manufacturer or cellphone service provider and load that to flash the ROM and complete the process.
If it's a UK XDAII, get the update at www.my-xda.com .
It appears the previous user tried to flash it with a ROM from another manufacturer (Q-Tek/MDA II/i-mate). You are now receiving a Model/Country ID error. I have not experienced this myself, but I have read posts in this forum on how to fix it. Do a search and I bet you will find it.
- OR - any user who has experienced this and successfully flashed his ROM could chime in here and give jonathh some advice . . .
After much ado about nothing..
i have returned to again fix this XDA2 (the joys of pesky FT employment; make your minds up guys.. you want this XDA2 fixed or not?)
Right i *think* with quite a high level of certainty that the XDA2 currently in my grubby mitts was purchased in Malaysia/Sinapore.
Now.. am i correct in that flashing it Xda_II_Upgrade_v16050.exe from http://www.my-xda.com/downloads.html
Would cuase the problem i have now.. or at the very least wont go on on the XDA2 now because it is a UK ROM and a Malaysia XDA2?
I have flicked thru the pages on here.. and i cant seen to see how to solve this!!
PPllleeasseee help
*sobs, and gently rocks back and fourth*
I think there is a bit of confusion going on in this post!
The first ROM you tried (XDA-developers-SER-v12.exe) is for XDA1 - NOT XDA2.
The best place to get the latest UK XDA2 ROM is http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIRom.htm
and i *believe* that the place to download the Malaysia ROM is
http://www.myxda.com/XdaII/serviceandsupport/template/XdaIISoftwareUpgrade.vm (note the absence of the '-' between my and xda...this is the Asian O2 website)
See if the ROM from either of those sites will install
Hope that helps!
How about scrambled?
Ok, thanks 'pope'
*none* of the roms suggest work..
Xda_II_Upgrade_v16050.exe reports unknown country code..
and the recently suggested
Xda_II_LaunchROM_v10311.exe just sticks on the 'checking for information' left it for over an hour! BUT doesn't report unknown country code like the other one.
I cant get the XDA2 rom from the Asia site, as after i registerd my XDA2 it reports i dont need the damn update... anyone got it already?
I have extracted the core files from both these exe's and tried to copy them to an SD card(the NBF fille) using XDAtools.. and xdatools report the files are invalid.
I am lost and clueless!
HHHEEELLLPPPPP
Well that didn't work...
I got my grimmy grits on another XDA2 and using XDAtools sucked the ROM off of that.. and then.. again using XDAtools squirtted it out onto an SD card..
But i am unsure what i have to do then? is this latest approach possible??
Comments welcome![/code]
Love to help… but
My UK O2 XDA II has exactly the same problem. I died whilst flashing the UK O2 1.60 ROM, and now I can't do anything with it. Identical symptoms. Identical complete lack of success (eight hours and counting).
How can I find out the country ID of my device when my XDAII is dead?
mark8barnes said:
Love to help… but
My UK O2 XDA II has exactly the same problem. I died whilst flashing the UK O2 1.60 ROM, and now I can't do anything with it. Identical symptoms. Identical complete lack of success (eight hours and counting).
How can I find out the country ID of my device when my XDAII is dead?
Click to expand...
Click to collapse
O2 will fix this for you if it happened as a result of flashing with their rom.
By they way, in case anyone was concerned when I said " I died whilst flashing the UK ROM", I did of course mean "it died..." ;-)
But I have solved my own problem! How come you can spend hours trying to find a solution, and as soon as you ask for help, you sort it out straight away??!!
I hope this works for you if you're still struggling.
1) Download the latest i_Mate ROM from http://www.clubimate.com/Support/RUU172126WWE_imate.exe
2) Download the XDAII Rom Editor from http://wiki.xda-developers.com/uploads/ER2003Edit_1_2_20.msi
3) Extract the files from the IMate ROM, and use the ROM Editor to change the Operator to 02. Get the instructions here and the password here
4) Flash the ROM as normal. It worked for me You could experiment with using the O2 extended ROM files rather than the T-Mobile ones, but I was just glad to get the thing working. Perhaps I'll feel braver later.
I did feel braver, and copied the O2 Cabs into the IMate Extended ROM file. Then I deleted the IMate cabs I didn't want, modified config.txt and prayed! Everything seems to have gone fine, and I'm now re-installing all the software. Already there seems to be a significant speed increase over 1.60.
I'd recommend taking this step before you flash the ROM, rather than doing it twice like I did.
mark8barnes is the man!
I didn't do the mods.. just as per your original post.. and it worked!! Yay
Thanks mate you da man!
Now i do have a query tho.. if i did suck the rom off using XDATools.. how would i get it bck on again?
Cheers all you guys..
Fried XDA
Hello Mark
Me too, I flashed my ROM with the UK version with the same result.
The link to the iMate ROM no longer exists, can you help me please. I'm a real novice at this.
Thank you
Ben (Aust)
mark8barnes said:
By they way, in case anyone was concerned when I said " I died whilst flashing the UK ROM", I did of course mean "it died..." ;-)
But I have solved my own problem! How come you can spend hours trying to find a solution, and as soon as you ask for help, you sort it out straight away??!!
I hope this works for you if you're still struggling.
1) Download the latest i_Mate ROM from http://www.clubimate.com/Support/RUU172126WWE_imate.exe
2) Download the XDAII Rom Editor from http://wiki.xda-developers.com/uploads/ER2003Edit_1_2_20.msi
3) Extract the files from the IMate ROM, and use the ROM Editor to change the Operator to 02. Get the instructions here and the password here
4) Flash the ROM as normal. It worked for me You could experiment with using the O2 extended ROM files rather than the T-Mobile ones, but I was just glad to get the thing working. Perhaps I'll feel braver later.
Click to expand...
Click to collapse
I have downloaded this, and I would like to upgrade my qtek to this release. Can I just run the BaUpgradeUT or is there additional work that I would need to do. I bought it in the UK and its SIM unlocked. I have already upgraded the Radio ROM to 1.08.
my devicedata.txt reads as follows
PH20B 0 B WWE E DANGA001 1.22.00 0 0 1.22.162 1.06.00 06.00
NOTE: This was just before the Radio 1.08 upgrade.
What I can't seem to understand is if I need to do some cooking especially considering that my device is a QTEK and is WWE
I would appreciate your responses.
Hi NinjaMan. Where did you get this update? Please let me know how I can get same update. Thank you for you help.
[email protected]
Please browse the forum, it's all here...
To the both of you, read my thread here:
http://forum.xda-developers.com/viewtopic.php?t=18128
It's all in there...easy heh?
Frontpage, I downloaded it from the FTP site here, however there has been some problem were someone has accidentally/deliberately deleted most of the files. However I just tried uploading the file back but got an "Upload failed" error. Basically, I couldn't create a directory to upload to nor could I upload to an already created director. I wil try and figure out another way to get you the file.
HappyGoat, believe me, I have read that thread, and I have also read the wiki getting started, this is how I upgraded to the versions displayed in my signature. The reason why I asked the question is because I cannot see the answer in the WIKI getting started or in your thread. This could be because I am DIM, which I don't have a problem accepting. Nonetheless, I would appreciate some help even if it a yes or no to the question I originally posted.
If someone with more knowledge tells me if it is possible for me to just run the upgrade based on the information I have provided in my original post, the plan would be to install and give my feedback as to performance. I just don't want to do it unless I am confident it would work.
HappyGoat, if you know the answer then please share, if the answer is in the thread you posted perhaps you can point me specifically to its whereabouts in the thread. I can't see it
the complete kpn files are in the root of the ftp site
However i didn't manage to install using baupgrade.
There was a folder in extended roms with the extended rom files from kpn. With the util to unlock and unhide the extended rom directory on your pda you be able to delete the old files and replace the kpn extended rom files. After that you can do a hard reboot and you have the kpn version. However it is better to edit the extended rom files a bit if you are not using KPN telecom as provider because it has some setupfiles that auto setup to kpn as provider. GPRS and MMS.
Ok, now i need some help
I disassembled baupgrade.exe and RUU.dll
Anyone can help change it a bit so it stops checking language and provider ¿ I think only baupgrade needs to be changed because ruu.dll is th file that contain's the routines to upgrade and reboot and get pda info and place's it into bootloader mode.
Looks to me that the only real difference, is the Extended ROM version...and as you probably know, the Ext. ROM contains mostly files that are put there by the Telco's.
What is does read in the thread I gave you, is that MDAIIIuser pulled this complete package apart and we all agreed that the contents of the Ext. ROM version were not shockingly different to the one you have right now...
Additionally, you could end up with a phone with dutch settings, KPN spash, and other custom KPN/dutch things. So, in my point of view, it is not worth the trouble.
But technically, you should have no problem upgrading, as the KPN ROM is WWE as well.
Hope that helps.
And eh, what is a "DIM"...?
Thanks Vastloper and Thanks HapyGoat.
O.K if the Real difference is in the Extended ROM version, then you gusys are probably right - its not worth the trouble. I don't really have any issues with my current setup apart from some bluetooth problems.
One last question - Is it worth upgrading my bluetooth to 3900. What are your experiences with 3900
bluetooth
If your bluetooth headset is making crackling noise when it is away more then 20 cm from your device then it is worth upgrading.
You need the bt3900 upgrade
ftp://xda:[email protected]/BlueAngel/Bleutooth CABS/BroadcomCorp_BT1.0.0.3900.cab
After installing it you also need BA_OEM_AudioGW.CAB
http://forum.xda-developers.com/download.php?id=3320
this is for better audio.
Also, this is covered in several threads on this forum...the jury is still out as people experience different things for some reason.
Thanks Guys, appreciate your help. I do in fact experiencing the crackling noise, but I thought it could be to do with my BT Headset which is a cheap no name model.
I will give 3900 a go.
Thanks again guys
Dear friendly XDA-Developer,
Three days back, I tried to upgrade my ASIA IIs radio from 1.02 to 1.12. It all went smoothly, but however, my IIs had been without signal and all it says is No Service. I've tried to search through the forums, but to no avail. Kindly please help... I'm at my wits end.
Thank you all!!!
Not sure were or what files you used, if they were type I or II, so I would just sugesst that you Reflash using the files of wiki.
Hi, thanks! I practically tried all the other radio roms for BA thats available on the ftp://xda-developers, but all give same results... Is it something to do with the radio rom or my phone?
You can't try all roms of the download site for they wont work unless you know what you are doing, (correct rom type ect).
Just make your life easy and go over wiki, download, read and install, its worked for many before you.
Read below this
Dear MDAIIIUser,
Like what you've said, I've read through the wiki BA guide, over and over again. I've followed throught the tutorial carefully and still, it didn't solve my problem.
I've some queries here:-
Firstly, if I use an incompatible radio version, would it affect my XDA IIs? I mean, I've successfully upgraded my CE Rom to 1.40 WWE previously and it worked flawless with cooked 1.40 Ext Rom, however, the moment I upgraded my radio rom, my phone feature cannot be utilised. It just says No Service. I've seen on the forum Asian users using Qtec 1.08 radio rom.
Secondly, my understanding on the Oper and WWE is that by setting them correctly with XDA3tools, I can then upgrade them to my XDA without facing any country code errors or such. But would it affect my XDA functionality?
Lastly, can you make any recommendations on which is the most appropriate CE/Radio ROM version I should use for my XDA IIs based on WWE & O2ASI001?
THanks a millions! Believe me, I've really tried very hard to get my IIs to work and have throughly read through the guide, but to no avail...
I recommend that you just download a FULL, fresh, 1.40 Shipped EXE (I recommend the I-Mate one) and upgrade with it.
Use the first method described here to upgrade.
Dear TheLastOne,
I'll try that now! I'll post the results after that.
Thanks a millions!
I've successfully flashed my XDA IIs with I-Mate shipped exe. All went smoothly, but the same problem persist. No service. I guess I can pronounce my IIs official dead... Sob Sob
khngaroo
Could it be that your device is sim locked or that your sim card is no good?
Dear MDAIIIUser,
I believe that my SIM is not locked as I can make calls using the same SIM with another phone. When I insert my SIM card into my XDA, there wasn't any prompt or indication of my device being locked... Is there another way to verify that?
Thanks!
khngaroo said:
I've successfully flashed my XDA IIs with I-Mate shipped exe. All went smoothly, but the same problem persist. No service. I guess I can pronounce my IIs official dead... Sob Sob
Click to expand...
Click to collapse
Hi KHNGAROO... I am not an expers as TLO and MDAUser..but you can give a try downloading the 1.10 radio and downgrading your 1.40 istallation thet contains 1.12 radio to 1.10... I experienced a lot of problems on my device ( low signal or no signal) with the 1.40+1.12 radio combination..and I solved with hios trick..Dont know if can work for you..but maybe you can try..byez
khngaroo
The fact that you have no service would or could indercate that it is beining rejected by your network operator.
Alas, I have no Idea what message you get when a BA is locked to a sim.
(as in the provider has SIM locked your device so that you can only use it with that sim on his network).
The fact that you can use your sim in a different phone proves that the sim is not faulty however that does not verify if the Phone is sim locked.
Thus can you insert a sim from another device that you know that works into your BA and use it.
I have no idea what you had on the phone before you upgraded it nor if it worked, nor if you have also changed your sim so its just a bit hard to work out your probem.
At the moment it could be a locked device or a faulty instaltion of the radio rom.
You might have to go back to your Shipped version to verify if the device still works.
Then upgrade the OS only and check again
Then cook the Extromn to make sure you are not downgrading anything with the new 1.40 OS
Then upgrade the radio to a higher version 1.10 to verify if it works
The upgrade to 1.12 to prove or disprove vicer's very good suggestion.
Have fun
Be careful with the files that you use as you can't use Type I upgrade files to upgrade a Type II rom. Thus you will need to always download the files based on wiki and not reuse the old ones.
Dear MDAIIIUser,
I've flashed my original shipped asian rom back to my device. Got the SD bootable from my pal holding the same phone. Didn't work, still says No Service. I guess either my device is locked or the hardware is screwed.
Is there anything I can do to unlock my SIM on my XDA, should it be my XDA being locked. Or do I really have to bring it down to the service center to get the whole thing fixed?
Thanks a millions for all your help... Appreciated...
You still have not asnswerd the question of the sim. So I still dont know if it is the original sim or if you are using another on on a locked device.
So based on what I do know:
If you flashed the original Rom and have the correct sim and it does not work then your device needs to be sent back to the shop (which will be no problem as you have the original rom in it).
Wiki has a how to unlock (but like I said I dont know if that is your problem)
To all whom had helped me along the way (esp. MDAIIIUser & TheLastOne & vicer)
Brought my XDA IIs to Accord Dist and got it fixed. Now its back. I was told by the customer service operator that they had replaced the whole mainboard altogether. They didn't tell me what was the exact problem. Guess it was the hardware all along. But I was wondering, how on earth can flashing a ROM cause so much damage?
Therefore, here is a warning to those who wish to flash their XDAs, please do so only f you know what exactly you are doing. Please read wiki carefully before you try anything, or you might end up just like me, hee...
Well glad you solved your problem. There are a lot and I mean a lot of people that have been able to falsh thier device via this forum. But as you said you need to read and understand what you are doing.
So what rom do you have now and are you going to keep it?
(Not sure based on your sig)
Dear MDAIIIUser,
Weel, I've upgraded my CE rom to 1.40. However, I've decided to maintain my radio rom as it is (1.02), its kinda like once bitten twice shy. Quite sceptical that my IIs might end up in heaps again, lol.
Thanks again for all your help and concern.
khngaroo, I'm glad all your problems have been fixed. If it is indeed a hardware problem, then you should not hesitate to upgrade your rom.
(Besides, if the problem returns, you know they'll fix it )
TheLastOne said:
khngaroo, I'm glad all your problems have been fixed. If it is indeed a hardware problem, then you should not hesitate to upgrade your rom.
(Besides, if the problem returns, you know they'll fix it )
Click to expand...
Click to collapse
Dear TheLastOne,
I took your word for it and gave it another shot! Followed all the instructions found at WIKI and presto, it worked and now my IIs is running on 1.40 CE and 1.12 Radio.
Many, many, thanks to all of you who had helped along the way!
khngaroo
Great, Happy for you.
The 1.40 rom has a few issues that can be found on the wiki Upgrade page that you need to be aware of.
Hello, my name is Kc and I'm new to these forums. I just purchased a Siemens SX66 on the Cingular network. I noticed that there is a ROM upgrade of version 1.40. I have looked around these forums for info but I'm not really familiar with the lingo so I'm not making much progress on my own. Can someone please help me to understand how to update my ROM for my SX66?
ROM Version: 1.32.10 WWE
ROM Date : 12/17/04
Radio Vr. : 1.02.10
Protocol Vr. : 1337.35
ExtROM Vr. : 1.32.115 WWE
Model # : PH20B1
Any help would be great, thank you much.
Read Wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Use the first method.
Still a problem.
First off, thank you TheLastOne, but I'm still having a problem. I tried to install the new Dutch ROM but after I click the update it goes to the next screen telling me what version of stuff I have on my phone then it attempts the update, and then brings up a screen telling me that the country ID is wrong. Did I miss something? Also another question, my display seems to be a little wierd as of late, I have a black boarder around the entire display as if the OS isn't set for the right resolution. Is there a way to make it fit the whole screen?
Thanks again.
~Kc
Figured it out.
Well after a few hours on my phone no longer working I really decided it was time to dig deep and figure it out on my own. I got it up and running with the new Dutch ROM and I'm really happy with it, especially the WiFi, it finds networks much faster now. I have a new question though. I don't use GPRS at all for connecting to the internet, and I have no connections set up. I just want to use WiFi, but I have the annoying 'G' symbol at the top of my PPC. Anyone know of a way for me to get rid of that? Thanks for making this site, and thanks to all the people who contribute. I'm a software developer and you can expect some releases for PPC now that I have one myself.
help with upgrade
its seem that you learn fast so please help me
i also own a cingular sx66 where can i download the dutch rom and how you skip the contry id problem many thank
Did you miss the 2nd post in this thread, seems to have worked for SmearedBlackInk
for mr nobody sunrise swiss
r u missing your mind in the second post it only 1.40 upgrade and not the dutch rom ?????????????
so next time check your post and dont be rude
israel
I'll try to explain
Well it's going to be hard to explain. I used a mix of method 1 and 2 on the page:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
The ROM I used can be downloaded here:
ftp://xda:[email protected]_DT_WWE_DutchRetail_14000_556_11300_Ship.zip
I tried to use method 1 but it just kept giving me a country ID error, so I nuked my ROM, then tried to install using method 2, but it kept stoping halfway through. I mixed my files a bit and used method 1 and some files from method 2 to form a new install folder and voila it worked.
Wow, I just read that and it doesn't really help at all does it.
I think the real trick is just to wipe your ROM before installing. I'd back it up first though, because it's kind of scary when your phone just sits in serial or usb mode and that's it. Sorry I couldn't be of more help.
more help
first many thank for all the links
i change the deviceid=1 and pass the first rom but in the second he stuck
and still give me country error can u help me how u mix the two option
israel
Read wiki. Method one says to download the ROM you want, follow by MaUpgradeUt_noID.ZIP. Unzip MaUpgradeUt_noID.ZIP into your ROMs folder, and run MaUpgradeUt_noID.exe twice and presto...
yop
yes its work many thank as it look a lot better on my first feeling the
wi-fi improve and also the radio bt
hope some more improvement will come in
Can't download MaUpgradeUt_noID.ZIP
broken link???
Sorry my powers are failing me, did you have a link in mind or was this a general why does not somebody search the whole of the site (as in all posts as well as the ftp site and wiki) to work out which link to that file does not work.
ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
broken link???
Well not for me, link works fine, opens up a save file dialog.
I get connection refused whilst trying to connect to....
Unplugged router, connected pc directly to modem, worked fine then!
How are you doing this?
Are you in a ftp program and if so have you logged on with the correct user/pwd.
Are you just clicking the link and you firewall software is refusing the download?
Its a problem on your side, the link works fine for me, as is, as posted by you.
PS do you need an answer in the other thread as well?
Hi to all the expert out there,
I just recently owe my very first PDA phone - CHT9110 and yes is from Taiwan, therefore it is all in mandarin (chinese). I've been reading alot about flashing ROM and hearing alot from friend about this as well.
However after such research and reading I still couldnt figure out how exactly I should do it. I hope you guys here can help me out.
From my understanding, to flash a ROM you need to do the following
1 - Unlock SSID
2 - Update Radio
3 - Install the new ROM
Are these steps correct?
My friend told me not to simply flash my phone because if the ROM I used is not compatible then I will get "Invalid Vendor ID" where I have to send it back to the shop I bought to get it fix, is it? Or is there anyway I can fix it myself? He also told me that P3600i ROM is meant for P3600i not CHT9110. If If I wanna flash CHT9110 I have to use CHT9110 ROM, is that true?
I've search around this board and also www but failed to locate any update on this ROM for CHT9110, I would appreciate it if anyone of you can share some thought with me here.
*Note that I have to get a clear picture of what I am doing before flashing it as I wouldn't want to send my phone back to the shop because I'm from other country and it will be troublesome to do so.
Thank a million!
wssoo said:
Hi to all the expert out there,
I just recently owe my very first PDA phone - CHT9110 and yes is from Taiwan, therefore it is all in mandarin (chinese). I've been reading alot about flashing ROM and hearing alot from friend about this as well.
However after such research and reading I still couldnt figure out how exactly I should do it. I hope you guys here can help me out.
From my understanding, to flash a ROM you need to do the following
1 - Unlock SSID
2 - Update Radio
3 - Install the new ROM
Are these steps correct?
My friend told me not to simply flash my phone because if the ROM I used is not compatible then I will get "Invalid Vendor ID" where I have to send it back to the shop I bought to get it fix, is it? Or is there anyway I can fix it myself? He also told me that P3600i ROM is meant for P3600i not CHT9110. If If I wanna flash CHT9110 I have to use CHT9110 ROM, is that true?
I've search around this board and also www but failed to locate any update on this ROM for CHT9110, I would appreciate it if anyone of you can share some thought with me here.
*Note that I have to get a clear picture of what I am doing before flashing it as I wouldn't want to send my phone back to the shop because I'm from other country and it will be troublesome to do so.
Thank a million!
Click to expand...
Click to collapse
till today still no any tools to do..you have to wait like many people.
That's sad..
So I just can't use other ROM for other model to do flashing?
Well can this be use anyway
http://www.xanda.org/index.php?page=flashing-rom-or-upgrade-guide
It stated is for P3600i not CHT9110
I know is the same device and spec and everything but for some reason, my friend did it once where he flash CHT9100 with P3600 ROM and ended up getting Invalid Vendor ID.. Therefore I need confirmation to proceed or at least what can be done when I get the error..
Thank alot..