Hi all,
I have a very annoying quirk with the way the Touch Pro sends a reply to an email. When you type an email and space down to start a new paragraph on a new line it looks fine when you type it but when you send it it pulls all the spaces out of the email making the entire thing one big paragraph. My Jasjam does not do this and I am wondering if anyone has a solution.
The strange thing is that it only does it on replies. If i start a fresh email it will actually send it maintaining the same structure I typed it in. Its the same thing regardless of whether i use the original shipped or cooked 6.1 or 6.5 roms.
Anyones help or ideas would be most welcome. Thanks.
Has nobody noticed this issue? or is it not so annoying?
It happens on all of your devices I would expect as I have seen a couple of devices do it. Its possibly a reg tweak somewhere that could fix it.
I have this problem too and it is annoying, but if you click on Edit sender's message while composing it'll send the whole message in plain text, including your line breaks. You'll lose any HTML formatting in the original message.
Many thanks for the tip. I just tried it and it worked fine. It would be good if MS or HTC or someone really clever here could find a system fix for it.
Thanks again for your help.
No problem. I've no idea why it does that, I had to mess around with it for a while and accidently found that workaround. My Hermes and Kaiser didn't have this problem.
Related
I had this problem on my 8525 after flashing one of many ROM's and now have it on my Tilt with stock ROM. When sending a new sms or replying to one, the screen defaults below the address part onto the bottom of the text portion of the screen. I know this is a reg hack that is needed, but for the life of me I can not find it in a search. This was a common problem on the 8525's after a certain ROM upgrade if anyone remembers.
you mean where it cuts off the person's info you are replying to?
Yeah its annoying!
Doesn't cut it out, but when you open the window to reply, it defaults to only showing the text area, and uses the bottom part of the screen as the point that it sets to show. Thus, the top part of the text reply window is off the screen.
And yes, it is very annoying. I gotta find the reg hack to fix this!
As I recall it happens when the reg is set to use the right and left nav buttons to page down when using IE, it causes the sms to open at the bottom of the screen and you have to scroll back.
This question was asked by another Kaiser user.....guess you guys have all been busy flashing ROMs
The answer IS a reg hack, and here's a link to the reply I posted - the OP hasn't responded to say whether the problem is now cured, but if it's the same issue I experienced on my Hermes, the above answer will work.
Post back....I'd like to know if it works (I'll be getting my Kaiser next month, so this will be something to add to the "Tips and Tricks" document I'm compiling from everyone else's posts )
Cheers,
Mark.
My reg value is already set to 1 in this file. So, only option, set to 0 and lets see what happens!
Was just skimming through some threads and stumbled upon this. That problem was driving me crazy but i hadn't gotten to the point of searching for a solution yet.
This worked for me on my Hermes.
Thanks ^_^
Raptor567 said:
Was just skimming through some threads and stumbled upon this. That problem was driving me crazy but i hadn't gotten to the point of searching for a solution yet.
This worked for me on my Hermes.
Thanks ^_^
Click to expand...
Click to collapse
Are you referring to the hack listed in the response above? Because on the Tytn II this value is already set as stated in that thread.
No this is not the same issue the Hermes had when you set the D pad to scroll in IE that issue was the "text curser" would be all the way at the bottom of a screen no matter what cutting off half of emails and what ever else text was sent to you. there is nothing to fix this issue as of now. BUT when I compose a new SMS it ALWAYS starts at the address line not sure why your don't
Hey Everyone,
I am looking to send a single sms to specific multiple contacts. I understand that the sms feature in WM6 allows you to autocomplete a contact by typing theyre name as you go, I am looking for however a CAB file or something that will allow me to do something like tick the people i want to send to?
I hope they're is something like this out for WM6, otherwise its a long time sending about 200 mobiles a new number ha ha.
I'm not a often poster, but long time viewer, and i know you all know your stuff and i'm thankful for anything you can tell me!
Sean Saunders
In Duttys 6.1 rom there is something called groupsms, I dont know how/if it works...but I know its there , may be what you are looking for
SeanSaunders said:
Hey Everyone,
I am looking to send a single sms to specific multiple contacts. I understand that the sms feature in WM6 allows you to autocomplete a contact by typing theyre name as you go, I am looking for however a CAB file or something that will allow me to do something like tick the people i want to send to?
I hope they're is something like this out for WM6, otherwise its a long time sending about 200 mobiles a new number ha ha.
I'm not a often poster, but long time viewer, and i know you all know your stuff and i'm thankful for anything you can tell me!
Sean Saunders
Click to expand...
Click to collapse
Don't know if you'd only be satisfied with ticking multiple names, but the auto-complete thing does allow you to type in more than one name. I assume you realized that? Alternatively you can just continually click on "add recipient" and select them all one-by-one, though that's a pain in the ass. I've found the autocomplete for multiple recipients to be pretty fast. Do you not find that to be the case?
I was chatting to a few people on palringo's MoDaCo group and one user suggested Jeyo Mobile Companion 2.0 Demo. It does exactly what i wanted to do on the phone but on windows XP!
I only really needed it as a one off but i would recommend it as a solutions especially if your going to use it reguarly
Thanks for your comments and suggestions though, your all good people!
Sean Saunders
you can try this software SMS Assistant from QimSoft
http://www.qimsoft.com/
After install, it will add one Menu item "Add Recipients" at the bottom of Menu
Click it then it allow you to multi select contact
yeah I use group sms as well you can find it in the development thread. didn't realize it was included in the 6.1 rom as well.
SeanSaunders said:
I was chatting to a few people on palringo's MoDaCo group and one user suggested Jeyo Mobile Companion 2.0 Demo. It does exactly what i wanted to do on the phone but on windows XP!
I only really needed it as a one off but i would recommend it as a solutions especially if your going to use it reguarly
Thanks for your comments and suggestions though, your all good people!
Sean Saunders
Click to expand...
Click to collapse
Don't worry mate there is an ultimate solution for GRoup SMS... Although i already answer this query in this forum before but anyway...
You definitely need a RJV SMS SCHEDULER OR SHUBAROO'S GROUP SMS 1.4.4 ...
just goto www.freewarepocketpc.net and search it there
cheers...
Anyone been able to work a fix for this? WM 6 would underline numbers in received e-mail, calendar etc etc one could dial the numbers directly from within the mail?
The paste function has also been removed from the dialpad
ROM 1.37.421.3
This thread has an interesting solution.
http://forum.smartphoneexperts.com/showthread.php?t=165787&highlight=dial
Surur
this is bugging me bigtime!
im going try change the phone skin to the old wm6 version with advanced config, seeing as the function was there before on older phones then it should work here too.
can someone provide a solution??
The same problem for me.
I realized that when you have the status opened (it opens while you are talking) in the menu you have the paste option... but it is useless.
I also want to paste some numbers in the phone to call them... it is very annoying not to have this option (sometimes I need to copy also some numbers from internet pages... but now it is impossible!!!).
Can someone help?!?
Thnx.
Urosh
Hi Surur,
Good one thx for the link, i think this was a serious oversight from MS, this is the one reason i would chuck the phone.
So far i have enjoyed the phone, i think it works well, but as i said its virtually useless if you cant paste numbers on the dialpad.
This limitation is really annoying me now; and still, a month down the line it's the only unforgivable problem I have with this otherwise fantastic little phone.
I was hoping it was a simple oversight, and would have been fixed by now. Has any of the later ROMs addressed the issue? If not, has anyone came up with a solution, or at least a realistic work around that doesn't involve pen and paper?
for over 3 years i am using a dialer "contact breeze".
the dialer himself is also of value but i am reinstalling it each time only for this tweak. long press anywhere in a meeting or task and it will offer any of the telephone numbers in it. no need of any other spaces, tlf:, etc. just type the number and it will be offered for dialing after a long press. the prog cost a few $. it worth it!
Thanks, sounds like a usable work around, I'll check it out.
Still hoping for a real solution though... Anyone?
studz said:
Thanks, sounds like a usable work around, I'll check it out.
Still hoping for a real solution though... Anyone?
Click to expand...
Click to collapse
Yes. Anyone?
Hi there,
using a touch Diamond and some time ago went through a ROM upgrade and used Sprite Backup.
On the messagign screen I now have some phantom mail boxes on the right hand side. If you click on the envelope it will come up saying "no Messages". If you then click on inbox it will take you to the Select an Account screen (as the selected account doesn't actually exist)
If you go through to the Windows Mobile interface you can only see the current mailboxes which are configured.
I have looked into the option of creating a new backup and hard reset and restore without the mail and configure all over again but would like to avoid this as I have found in the past this leaves me with duplicate records (due to sycing with multiple machines).
I am looking to find where I need to go to remove the phantom mailboxes. Looking around I am assuming there must be some configuration files or registry elements for TouchFlo which tells it to display the folders.
Does anyone know where this information is to edit or delete? All ideas are welcome and encouraged.
Thanks in advance
ghost email
i have the same problem.Did you find the solution for this?Please post.
I have the exact same problem and it's quite anoying
i had the problem once too, and then I was advised to use the file i'm posting here. Copy to phone and run the .exe from phone.
I got it from another thread here on XDA-Devs, but don't remember who to credit.. Post if successful.
chribruu said:
i had the problem once too, and then I was advised to use the file i'm posting here. Copy to phone and run the .exe from phone.
I got it from another thread here on XDA-Devs, but don't remember who to credit.. Post if successful.
Click to expand...
Click to collapse
Thanks alot, this worked perfectly
Worked like a charm...
works a treat, thanks.
this is excellent. thank you very much.
Easy to use. Thanx!
Manilla is showing that I have 1 unread sms, when I check there is not. I click "all messages" to get to the WM inbox but there are no unread messages in there.
I have tried to go to tools and "clear SMS/MMS", this wipes all messages, and when I look in the inbox it's empty, but when i click on the "inbox"tab to show the whole sms tree I see inbox with a blue "1" in brackets. I have also tried a sof reset, with no effect.
Any of you guys come accross this before?
BTW this has only started since I recieved an SMS while TomTom was running, and I had to ignore it.
Cheers for any help you can offer
Perhaps the mail still is on the server. Try to delete the mail configuration and then configure it again.
no luck
I tried to do that, but was unable to delete the "SMS" account. I also tried inserting a SIM card from a different opperator, but this did no good either.
Hey all,
i've got the same problem since yesterday... posted it already in the topic where aqll post their problems with new WM6.5
hope someone has a solution!
I've got an official WM6.5 HTC german ROM
I'm having the same problem mate (http://forum.xda-developers.com/showthread.php?t=579772) but now manila home screen is showing i have 2 new messages when in fact i have none. I had a good scoot in the registry but there's nowt there to reset MS's inbox (as far as i could see but then again i'm not a reg buff).
I've read elsewhere that this "new message" is a known issue in WinMo 6.5..
Hoppe there's a fix for it soon...or someone here can help us out
Cheers
Mo
thanks!
Thanks for the info guys.
Has anyone seen this issue on WM6.1?
tonyh0905 said:
Thanks for the info guys.
Has anyone seen this issue on WM6.1?
Click to expand...
Click to collapse
Yes, I had it on 6.1. Only started last week, but I installed 6.5 last night so I have managed to cure it, albeit in a rather extreme way.
Gunzta said:
Yes, I had it on 6.1. Only started last week, but I installed 6.5 last night so I have managed to cure it, albeit in a rather extreme way.
Click to expand...
Click to collapse
I don't think I want to re-flash 6.5.....but that 1 message symbol is realy starting to bug me!!
For those who fixunreadcount did not work for "ghost" messages.
Try using Ceregeditor it is simple to find, works very well... I used it for my HTC pure. If you have a problem unlocking your phone, there a few threads on forums i read on how to do it. If your phones already unlocked.
HKEY_CURRENT_USER\System\State\Messages\sms\Unread
Double-click on COUNT and change the number to 0 (zero). You should see the change immediately on your phone -- you don't have to do a save. If it works then save.
Worked for me instantly! Thanks to rdphoto on ppcgeeks.com, any questions on anything ill try and help, hope it works