Is my Blackstone Dead? - Touch HD Windows Mobile ROM Development

Oh man
I think I also screwed up my HD. It is stuck on Loading... screen. Won't connect to pc. Can not flash anything to it. Restores ok but after reset it shows "update rom code error,please try again" and then next screen shows Loading... for ever.
Please help me guys.....
Thanks a lot

tararura said:
Oh man
I think I also screwed up my HD. It is stuck on Loading... screen. Won't connect to pc. Can not flash anything to it. Restores ok but after reset it shows "update rom code error,please try again" and then next screen shows Loading... for ever.
Please help me guys.....
Thanks a lot
Click to expand...
Click to collapse
Remove the battery put it back hold the volume down button and turn your device on. now you should be in bootloader modus and now flash a shipped rom for your device.

tararura said:
Oh man
I think I also screwed up my HD. It is stuck on Loading... screen. Won't connect to pc. Can not flash anything to it. Restores ok but after reset it shows "update rom code error,please try again" and then next screen shows Loading... for ever.
Please help me guys.....
Thanks a lot
Click to expand...
Click to collapse
Don't miss HSPL ......

Thanks guys
I can enter bootloader screen with usb at the bottom. But can not flash anything, it just sits at 0%. SPL is 1.54.

Do you have a file called blacimg.nbh on your sd-card? Obviously you can't check, so i would remove the sd-card as well and try again. If successful flash via uspl.

Thanks ATi75
I was already reading USPL and used it and voila. Its alive again. Nothing else worked. Now I will always use USPL.
Thanks again

Glad it worked out! Had a similar experience a few weeks back. Not something i want to experience again for a long while

I know. I wasted around 3 hours and lost lots of my hair.
Thanks again

tararura said:
I know. I wasted around 3 hours and lost lots of my hair.
Thanks again
Click to expand...
Click to collapse
do you have tested mtty?

Related

did i brick my blackstone??? PLEASE HELP!!!!

When i turn on my phone I get the Tri Colored screeen
and it says: Upgrade ROM error code please try again.
and then the phone turns off and on.... Please help....
please please HELP SOMEONE!!!!
Don't dispair! I had the same problem and got out of the situation: http://forum.xda-developers.com/showthread.php?t=505377&p=3677341
You probably have the wrong Original Rom from HTC installed (may wrong language).
To solve the situation you will need USPL. USPL will install. If you are using Windows Vista you will probably have to update the drivers (See the thread).
Once USPL is running install the Original HTC 1.56-ROM.
but how can i can i installl uspl if every time i get into bootloader it turns off after 10 seconds and then turns back on...
nobody else can help??????
Try to take out the battery for one minute or two, then see what happens when switching on.
If ok (usual start) make usual normal bootloader state, and see what is your SPL. Then decide which flash you have to do.
Mr. Nick said:
but how can i can i installl uspl if every time i get into bootloader it turns off after 10 seconds and then turns back on...
Click to expand...
Click to collapse
Flash back your original ROM, you don't need USPL to do this.
For your original ROM look at this link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
If you have problem flashing with you PC, you can try to flash from SD just extracting the files from the original ROM exe you downloaded on a temp folder (you can use winrar to do it), rename the "ruu_signed.nbh" to "BLACIMG.nbh", copy it to the root of your SD card, and flash the rom from the tri-color screen by pressing the power button.
Then, if everything is fine and your phone work again, you can think to flash a coocked ROM using USPL.
NOTE: you can read the wiki to learn something more, start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
please help me!!!!!
dalamario said:
Flash back your original ROM, you don't need USPL to do this.
For your original ROM look at this link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
If you have problem flashing with you PC, you can try to flash from SD just extracting the files from the original ROM exe you downloaded on a temp folder (you can use winrar to do it), rename the "ruu_signed.nbh" to "BLACIMG.nbh", copy it to the root of your SD card, and flash the rom from the tri-color screen by pressing the power button.
Then, if everything is fine and your phone work again, you can think to flash a coocked ROM using USPL.
NOTE: you can read the wiki to learn something more, start here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
Click to expand...
Click to collapse
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Mr. Nick said:
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Click to expand...
Click to collapse
It mean your phone stay at bootloader? tri-color sreen with SPL you can see. It's ok. You should download USPL 2.5 and Rom ship 1.56.4xx. Fisrt you flash SPL by running blac_uspl , your SPL will be change to 1.15USPL, then you flash ship rom 1.56.4xxx, then everything will be ok. Give it a try
Note : It's more stable if you use Win XP.
from my experience with HTC Wizard and what you are describing it
sounds like
your battery is very close to dead
you need to find a way to recharge it
your phone is protecting it by shutting off
also i don't know how valid this is for the Blackstone
but the wizard would not charge in tri-color mode
(again for battery sake)
so make sure you have a nicely charged battery (buy a spare or a table charger)
and then try to flash something again
P.S. i don't know how one sentence cries for help peppered with EXCLAMATION points encourage anyone to help you
nguyenbathanh said:
It mean your phone stay at bootloader? tri-color sreen with SPL you can see. It's ok. You should download USPL 2.5 and Rom ship 1.56.4xx. Fisrt you flash SPL by running blac_uspl , your SPL will be change to 1.15USPL, then you flash ship rom 1.56.4xxx, then everything will be ok. Give it a try
Note : It's more stable if you use Win XP.
Click to expand...
Click to collapse
A clarification of the above post. When you have 3 colors (actually 4 with white color) and USB on the white band you have to start blac_uspl.exe. That will replace the original bootloader of your phone with cracked temporary bootloader named USPL. At this stage it shall no more give errors and you may flash it from the PC or from the memory card.
The suggestion for the battery also seems fair.
Mr. Nick said:
sir you don't understand.... how can i flash back to my original ROM if it turns off every 10 seconds when i turn the phone on......
and also.... if i press the button on top... nothing happens.... if i put the usb cable into the phone it will go into the tri- color screen
Click to expand...
Click to collapse
You have to copy the BLACIMG.nbh on the microSD using a USB card reader, not your phone. Then with the microSD on the phone, in the tri-color screen, it will automatically flash your ROM, if you don't have low battery of course.
If you want to use USPL to flash a coocked ROM (for your original official rom is not needed). Your phone have to stay at tri-color screen for more then 10s.
Perhaps your problem is a low battery as someone already suggested.
Do you have tried to remove battery and put it back, let the phone off and charge it with the wall charger?
lol i did have low battery... how unlucky am i... it would shut off every so often....
but i fixed!!!!
i took out the battery and synced it with the cable..... without a battery inside and it worked!!!
I love you guys!!!!
i am not lieing i was about to cry
wow
Mr. Nick said:
lol i did have low battery... how unlucky am i... it would shut off every so often....
but i fixed!!!!
i took out the battery and synced it with the cable..... without a battery inside and it worked!!!
I love you guys!!!!
i am not lieing i was about to cry
Click to expand...
Click to collapse
LoL
Dont stress so much next time. When your stressed out you dont think with a clear head. Glad it worked out for you.
The changing of ROM only seems can not brick your phone. Only unsuccessful changing of SPL can. Until SPL is OK you may ever flash new ROM.

Bricked phone TyTN II....crap....what to do ?

Hey guys, i was flashing a new ROM and after i pressed Jump SPL on the phone , i didnt do HARD SPL but went on and installed a ROM ....well now it starts with the loading screen ...........and just never loads..... any suggestions ? is it trash ?? i hope not. Thank
mfesenko said:
Hey guys, i was flashing a new ROM and after i pressed Jump SPL on the phone , i didnt do HARD SPL but went on and installed a ROM ....well now it starts with the loading screen ...........and just never loads..... any suggestions ? is it trash ?? i hope not. Thank
Click to expand...
Click to collapse
Try flashing your stock ( original ) rom, found in the wiki . And start over again.
Oh yeah, and this time it might be a good idea to read ALL the instructions FIRST.
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
denco7 said:
Try flashing your stock ( original ) rom, found in the wiki . And start over again.
Oh yeah, and this time it might be a good idea to read ALL the instructions FIRST.
Click to expand...
Click to collapse
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
mfesenko said:
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
Click to expand...
Click to collapse
Try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to PC and see if you can run the RUU in your stock rom.
denco7 said:
Try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to PC and see if you can run the RUU in your stock rom.
Click to expand...
Click to collapse
Nope, it just does a regular soft reset , and back to the same screen
it is easy to flash it back with original rom or unlock it. just read some tutos here on xda
JugglerLKR said:
it is easy to flash it back with original rom or unlock it. just read some tutos here on xda
Click to expand...
Click to collapse
i looked into it and they had solutions if your phone is in the tri colored screen. my phone is not. my phone is in the loading windows screen... but it never loads.
mfesenko said:
i looked into it and they had solutions if your phone is in the tri colored screen. my phone is not. my phone is in the loading windows screen... but it never loads.
Click to expand...
Click to collapse
that's even better - just start it in 3color boot loader and flash!
loading windows screen appears AFTER 3color boot loader...
mfesenko said:
Nope, it just does a regular soft reset , and back to the same screen
Click to expand...
Click to collapse
Keep trying to put it into bootloader. Try a hard reset and follow instructions to get it into bootloader. Sometimes it takes several tries.
JugglerLKR said:
that's even better - just start it in 3color boot loader and flash!
loading windows screen appears AFTER 3color boot loader...
Click to expand...
Click to collapse
Maybe, I didnt Explaine it correctly but , I do NOT get the tri colored screen . This is how it goes after i press the power button to start my phone : So it automaticaly goes into loading screen where on the bottom right hand corner it shows the Radio version , the G version and some other version.......... and that is the only screen i get after staring my phone.
Maybe you didnt read well enough..
Maybe, I didnt Explaine it correctly but , I do NOT get the tri colored screen . This is how it goes after i press the power button to start my phone : So it automaticaly goes into loading screen where on the bottom right hand corner it shows the Radio version , the G version and some other version.......... and that is the only screen i get after staring my phone
Click to expand...
Click to collapse
YOU AREN'T BEING ASKED TO HIT JUST THE POWER BUTTON
try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to pc and see if you can run the ruu in your stock rom.
Click to expand...
Click to collapse
keep trying to put it into bootloader. Try a hard reset and follow instructions to get it into bootloader. Sometimes it takes several tries.
Click to expand...
Click to collapse
THAT MEANS DO IT AGAIN !
Thanx
Thank you denco , for the info , and thanx chumley for beating some sence into me. So i got to the bootloader. Do i need to instal my original rom or can i just reinstall the one i got or maybe another one?
well I have the same problem.
It started with the edfc problem explained here
While trying to fix that problem, I switched my rom to the TPC elite rom series (windows 6.5).
All went fine till three days later, while text-messaging, the screen freezed. I removed the battery, restarted the device and found myself having the same symptoms discussed in this threat.
Putting my phone into bootloader doesn't work, and I think It has to do with the problem I had before; that apart from the directional buttons and the power button, all buttons are defunct.
Anyone any suggestions? (apart from: don't bother us, etc, etc...)
my phone randomly bricked too a while back....as far as I understand is that either you CAN put your phone in to bootloader or your phone is junked....correct me if im wrong ppl
.....make sure you hold the camera and power buttons then reset with stylus....
and make sure you install your stock rom...aka the att tilt rom
if you didn't do it already...
1. flash your original rom (SD card method - Step 5 Flashing Via MicroSD Card ) you need the rom to be at least from the same operator. it should run just fine, just as long as you follow the directions.
2. HardSPL,SIM CID unlock, etc. as described on the same forum i pointed to a little earlier. from this point on you should have a phone just like it was when new.
try to read more carefully (maybe a few times) and search before you start a new thread.
on the wiki and in the stickies in the rom development section you get a lot of "bricked" solutions. you just have to read them all and see what is your case...

Cry for help! D:

I tried to root my G1 from this link..
http://forum.xda-developers.com/showthread.php?t=442480
Made it through the first few steps well, until i finally began to upgrade the image dreaimg or w,e.. It failed on me & now i cannot leave the screen. I remove the battery & turn it on. but when i do it stays in the same spot.. I tried everything & need some help.. ]:
Here is a pic of the screen.. : http://img683.imageshack.us/img683/4355/picture001bk.jpg
Did it start updating, then stop in the middle of it? Did the phone turn off due to running out of battery during the flash? Did you format your card to FAT32, download the proper RC for the original sale location of your phone?
Try pulling the battery at, then removing your SD card, do a long format to FAT32 (whether it is or not) copy the dreamimg.nbh onto the SD card, put the SD card back in the phone, put the battery back in, put it on a charger not turned on for 30 minutes, then take it off the charger...
Now that you have done all that, try booting into boot loader again by holding down the camera and power button until it goes into that screen again and does it's thing.
If this doesn't work, well, good luck since I have no idea from there.
Yes i've tried all of that.. Once i remove my battery it turns on, but as soon as i put it on again it turns on & the same screen appears.. There nothing i can do to go back to the Home screen.. D':
I most likely made a mistake but now i cannot fix this! ]:
SOme onee! please help me.. ]:
Everyone continues to ignore my thread..
have you tried to reset within there by pressing Home+menu+end? ppl are not ignoring.. jus they dont kno how to help.. as the guy already gave ideas that im pretty sure everyone would have said
Jose_95 said:
SOme onee! please help me.. ]:
Everyone continues to ignore my thread..
Click to expand...
Click to collapse
When does this screen appear? Instead of the G1 screen or after it? If after, hold down home+Power and get into recovery, try reflashing your rom.
ilostchild said:
have you tried to reset within there by pressing Home+menu+end? ppl are not ignoring.. jus they dont kno how to help.. as the guy already gave ideas that im pretty sure everyone would have said
Click to expand...
Click to collapse
I tried that combination just now & it wont work either.. ]: I've tried all combinations with buttons i know to try and reset the phone to get away from that uploader thing.. But nothing works..
BTaylor927 said:
When does this screen appear? Instead of the G1 screen or after it? If after, hold down home+Power and get into recovery, try reflashing your rom.
Click to expand...
Click to collapse
That screen is the only thing that ever appears on my phone.. ]:I cant take that screen away like i want too.. So it appears instead of the G1 screen..
If that is the only screen that ever shows up, you very well may be bricked, I hate to say it.
It really sounds like during your flashing of the .nbh file it was disrupted for one reason or another, either the battery died or it was a corrupted file, so the only file left on the phone is the boot loader. Thus, it is the only thing that will show...
Of course, I am not 100% positive without knowing exactly what you did, not being able to mess with the phone myself, and so forth.
Some people have been able to bring phones back from the dead by getting lucky and being able to get ADB to work... try plugging the phone into your computer using a data cable and see if you can get any sort of ADB to work, perhaps seeing if you can get the stock HTC update program to recognize the phone and hopefully flash it into working.
pjcforpres said:
If that is the only screen that ever shows up, you very well may be bricked, I hate to say it.
It really sounds like during your flashing of the .nbh file it was disrupted for one reason or another, either the battery died or it was a corrupted file, so the only file left on the phone is the boot loader. Thus, it is the only thing that will show...
Of course, I am not 100% positive without knowing exactly what you did, not being able to mess with the phone myself, and so forth.
Some people have been able to bring phones back from the dead by getting lucky and being able to get ADB to work... try plugging the phone into your computer using a data cable and see if you can get any sort of ADB to work, perhaps seeing if you can get the stock HTC update program to recognize the phone and hopefully flash it into working.
Click to expand...
Click to collapse
So then is there anyway to restart the phone? Like a secret way? & when i connect my phone to the computer when its shut off, it appears on the computer but not completely.. it says that one of the files are not recognized. Damn, this is really a pain.. ]:
So, you cannot boot into recovery, correct? And have you tried to connect to your pc and use ADB?
rjgonza said:
So, you cannot boot into recovery, correct? And have you tried to connect to your pc and use ADB?
Click to expand...
Click to collapse
Agreed.
You should read up tutorials on ADB and see if you can use ADB to access your phone. If you can, your phone can still be recovered.
If not - then yeah, brick.
akapoor said:
Agreed.
You should read up tutorials on ADB and see if you can use ADB to access your phone. If you can, your phone can still be recovered.
If not - then yeah, brick.
Click to expand...
Click to collapse
I cannot connect it to my computer at all.. Once turning on the phone the only thing that appears is the loader thing.. Whats ADB? how can it help me?
The Search button is your friend.
http://forum.xda-developers.com/showthread.php?t=502010

Help : problem after updatin d ROM.

somehow i change the HardSPLWrapper from 1.56.OliNex to 1.14.OliNex.
then my HD stoped working and its show me the "red,green,blue,white" screen with this MSG :
BLAC100 300
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgreade ROM code error please try again.
Click to expand...
Click to collapse
if i connect the cable its show me USB.
when i try to update the ROM version or update the SPL to 1.56.OliNex. it show me the MSG in the attachment.
plz tell me what to do. this is the second day without my HD. + im in philippense those days i dont know where to fix it.
thanx
Hard reset.
Try some hard reset and then do flash again to higher hard spl 1.56.
Rom.
If the hard reset doesnt help flash with stock rom and do te hard spl again.
mcnaget said:
If the hard reset doesnt help flash with stock rom and do te hard spl again.
Click to expand...
Click to collapse
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
yabdoo said:
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
Click to expand...
Click to collapse
Not sure if it helps, but maybe you can try flashing stock ROM using USPL?
yabdoo said:
thnx for ur efforts.
but still the Hard reset doesnt help.
i tried to flash the stock rom, but same problem.
its give me a MSG : 00028002 not allow
Click to expand...
Click to collapse
yes try USPL 2.5
ill go through it with you
CaponiND + jigners
thank you.
i tried the USPL 2.5
but still it show me spl-1.14.
and after updating the ROM.
its stuck on the setup screen : tap the screen to setup your device.
+ something wrong with the screen color.
Boot.
Remove battery for some time,try to get in to boot loader from device not from windows,restart windows if there are any usb connections or processes in windows that prevent from flashing. Insert usb cable in different usb port. Try on a different pc.
the boot problem is finished. after i change the USB port.
i update to SPL-1.56, then i update the ROM.
but still its stuck on :
tap the screen to set up your windows phone.
when i tap the screen, the screen comes bright. but nothing change.
and its vabirate for a second. from time to time while its on the set up screen.
thanx mcnaget but still i need a help.
Battery.
Remove the battery for 24 hours and try again.
24 hours more
ok ill try, thnx alot.
Battery.
I have read in some post that this could help but if it is a hardware damage than none of this would help.
I wish you best of luck to bring him back to life.
Regards.
thanx
still stuck at set up screen.
i notice some thing when i update, usually it show me in the box :
verify that you want to update the ROM version :
from :
Image Version : "the previous ROM"
to :
Image Version : "the next ROM".
but now its show nothing on "From": Image Version.
just show mo the Image Version of "TO".
See the attached Pic.
Rom.
Have you try manualy to go to boot loader.If you already have olinex 1.56 try some different stock rom.
yabdoo said:
but now its show nothing on "From": Image Version.
just show mo the Image Version of "TO".
Click to expand...
Click to collapse
This is normal behavior when flashing from/to custom made ROMs, at least with USPL (never tried HSPL )

SGS I9000 Hard Bricked? Is there solution? Help please!

After my last attempt to put some ROM to keep a stable, result is the following - when i try to go in "Download Mode" , at the top left appears a text "KeyPressed,1". I search here, in Google, but nothing.. I think my phone is HARD BRICKED I'm asking for your help, i know you are erudite people, and only you can help me! Thank you, for listening my problem! Thank you!
So am I right that you can't boot your phone? What happens when you turn on your Phone ? Bootloop?
KUN1 said:
So am I right that you can't boot your phone? What happens when you turn on your Phone ? Bootloop?
Click to expand...
Click to collapse
Ive got the exact same problem
Ill explain my problem in more depth
phone bootsup and flashes a pic of the android then goes into recovery mode so cant geto normal phone operations
under advanced , log it says checked for extendedcommand...skipped exection of extendedcommand, file not found...
other interesting thing to note center button does not work ie using only voulume and power switch but the touchscreen back button works
when I try to put in dl mode it does show yellow android but has keypressed,1 on screen as well ,
Computer knows that devise is there but doesn't show it up and Oden 1.7 sometimes picks it up but doesn't successfully update files says it failed
Thanks for your interest
have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1

Categories

Resources