Hi,
I have bought the Philips SHB 6110 Headset and I can connect it succesfully to my HTC Touch HD.
Hoever I want to use the headset for calling on skype or realated PC software, thus I want to connect the headset to the PC.
I had one bluetooth dongle but it didn't want to connect, I bought another one cheap just to try, Trust Bt-2100p, which comes with a Toshiba stack, however I cannot connect with those ones either.
The Trust dongle supports BT 2.0 + EDR
I think it is because of the profiles, the headset has the following profiles:
Bluetooth 2.0+EDR, Bluetooth stereo
support (A2DP – Advanced Audio
Distribution Profile, AVRCP – Audio Video
Remote Control Profile), Bluetooth mono
support (HSP – Headset Profile, HFP
– Hands-Free Profile)
However, for the bluetooth dongle usually it is not written on the pack which profiles it supports.
Do you think I could try to make it work, or do I need to buy another bluetooth dongle with A2DP?
I just put mine in discovery mode and it find the headset
and it see the profile
I use the ms stack got the usb bluetooth with a ms mouse
with bluetooth
used a bluetake stereo headset before and that worked ok with
the toshiba stack unlike the broadcomm bt stack which would
only do headset not a2dp
Is it possible to use stereo bluetooth in g1 to listen to music ?
Stereo bluetooth
Yes my friend i have a motorola S9 stereo bluetooth head set and work perfectly
Anybody here has tried to use the "Hi-Fi Wireless Headset with FM Radio MW600" with the Ameo?
My Ameo has the (German) HTC WM6.0 stock ROM but I want wo try a WM6.1 ROM. I want to make calls with the MW600 bluetooth headset, voice dialing and audio steaming. And caller-id on WM600 display would be very nice.
bluetooth disabled after pairing
Well, because nobody can (or want) to answer me, I had to test by myself.
The MW600 stereo bluetooth headset is a very nice gadget. With silver and white colors it looks very nice beside the Ameo (with has the same colors). The headset has two parts - a small controller with an oled display, some buttons and connectors and a good in-ear headset. The headset has very short wires but because you only have to connect it with the controller, it should be no problem. If you want another ear-phone you can connect every 3,5mm standard ear-phone.
The controller has buttons for on/off, call, play/pause, forward, backward and a volume slider. Pairing with the Athena was very easy, similar with other bluetooth headsets. The MW600 supports hands free and wireless stereo profile.
Once connected, the controller can pair the Arthena automatically - very nice.
With wireless stereo you can use the MW600 as a stereo ear-phone for music and videos. On CorePlayer you can control pause/play, forward, backward and skip over bluetooth and the controler can show the play time.
On incoming calls you see the phone number (not tested if caller-id/name is working) on the controller display. And you can use voice dial for making calls too.
The MW600 has a built-in RDS radio - very nice because the Athena has no radio.
Well... but there is a big issue.
After Athena and MW600 are paired, the Athena disables bluetooth after some seconds.
I have tried some ROMS like original HTC WM6, irus' AP4 vanilla or AGB 3.0. On HTC WM6 I can't use the call button on the controller too.
On a WM6.1 ROM bluetooth is disabled but not the blue led. I had to disable and enable bluettoh some times to reactivate it.
On AGB 3.0, led and bluetooth state are identical and I can reactivate bluetooth with one simple click. The headset pairs automaticly on enabled bluetooth but after 10 seconds, bluetooth is disabled again.
Well, if I'm fast enough to start CorePlayer, I can use the headset without problems as stero head-phone. If I have a call, I can use the headset without problems too. Very strange.
Now I have deactivated wireless stereo on bluetooth settings and the connection was stable for some hours.
I have a simple Jabra BT2080 bluetooth headset to, only useable for mono hands free connections. But this works great with the Athena, stable connection for more than 8 hours.
Purzelkater said:
Well, because nobody can (or want) to answer me, I had to test by myself.
The MW600 stereo bluetooth headset is a very nice gadget. With silver and white colors it looks very nice beside the Ameo (with has the same colors). The headset has two parts - a small controller with an oled display, some buttons and connectors and a good in-ear headset. The headset has very short wires but because you only have to connect it with the controller, it should be no problem. If you want another ear-phone you can connect every 3,5mm standard ear-phone.
The controller has buttons for on/off, call, play/pause, forward, backward and a volume slider. Pairing with the Athena was very easy, similar with other bluetooth headsets. The MW600 supports hands free and wireless stereo profile.
Once connected, the controller can pair the Arthena automatically - very nice.
With wireless stereo you can use the MW600 as a stereo ear-phone for music and videos. On CorePlayer you can control pause/play, forward, backward and skip over bluetooth and the controler can show the play time.
On incoming calls you see the phone number (not tested if caller-id/name is working) on the controller display. And you can use voice dial for making calls too.
The MW600 has a built-in RDS radio - very nice because the Athena has no radio.
Well... but there is a big issue.
After Athena and MW600 are paired, the Athena disables bluetooth after some seconds.
I have tried some ROMS like original HTC WM6, irus' AP4 vanilla or AGB 3.0. On HTC WM6 I can't use the call button on the controller too.
On a WM6.1 ROM bluetooth is disabled but not the blue led. I had to disable and enable bluettoh some times to reactivate it.
On AGB 3.0, led and bluetooth state are identical and I can reactivate bluetooth with one simple click. The headset pairs automaticly on enabled bluetooth but after 10 seconds, bluetooth is disabled again.
Well, if I'm fast enough to start CorePlayer, I can use the headset without problems as stero head-phone. If I have a call, I can use the headset without problems too. Very strange.
Now I have deactivated wireless stereo on bluetooth settings and the connection was stable for some hours.
I have a simple Jabra BT2080 bluetooth headset to, only useable for mono hands free connections. But this works great with the Athena, stable connection for more than 8 hours.
Click to expand...
Click to collapse
I able to pair this mw600 with my laptop and 2 phones(HTC Touch Pro2 and Sony Ericsson F305).
1) I can answer a call from SE F305 while on movie from laptop/FM/musci from HTC without any prob. The quality of this device SUPERB!!
2)The only prob is with HTC,I can't pair HTC with MW600 while on movie from laptop/FM/music from SE F305. I tried change many option and tweak but hopeless. Anyone have a solution for my problem?Or MW600 compatible multipoint with SE phones only?
TQVM
Hi.my car stereo from kenwood 6544 got an integrated parrot system.works great over bluetooth but microphone is bad.so my question is if i can pair the galaxy with the stereo unit and use a cable heqdset for the microphone at the same time.
So voice over the cars speakers, speaking over cable microphone.
Bought a new smart tv that is capable of outputting bt sound. No bt headphones tho. So i have an "old" android phone just gathering dust. Can i make it into an A2DP receiver so i can plug my wired headphones in ?