I do installed Hard-SPL, upgraded radio and flashed rom to my Trinity.
What will happen if I hard reset :
Q1. Do I need to installed Hard-SPL again ?
Q2. Which rom will be restored ? (factory one / flashed one )
Q3. Which radio will be restored ? (factory one / upgraded one )
You will get back to the exact ROM you have flashed...
In case you want to get back to Factory ROM, you need to flash it on your device.
Related
Hello
For first i had installed 1.30 oilpro and Radio 1.50xxx
Than i had installed SSPL.
Is it normaly that when im flashing rom apears the bootloader sspl (by des), and when i enter the bootloader manualy i see the oilpro 1.30 ecc.
the only problem is that the rom update aborts after starting bootloader, and i must restart the setup in bootloader mode.
How to reset the phone to original Bootloader and radio, and where to find it?
Need i SSPL or can i work only whit spl (Oilpro)??
What are the kommands to reset and format it complete in original status?
Sorry by my bad english
i'd also like to know
Your english is good.
I also have some problem to upgrade the rom.
I did so many test, that like you I'd like to go back to intial satge.
http://forum.xda-developers.com/showthread.php?t=377502
Let's wait some help
Hi everybody,
i have a serious problem whith my diamond. In the past i have flashed some cooked roms in my diamond. But yesterday in order to have my warranty back i flashed an official rom 1.93 and i lock it with the original spl 1.93
.
So far good. But today i tried to flash an official rom 2.03 and it showed me this : Error [294] : Invalid Vender Id
I looked for answers at xda but they say that i have to use Hard Spl.
I dont want to use Hard spl because i will lose my warranty again so i cant use it.
What do i have to do to flash official rom 2.03????
Thanx in advance
Nothing get?? Someone to help?
is it a original HTC Diamond, or rebranded?
u may still need the Hard SPL for the 2.03 ROM, i'm not sure.
can anyone give me a step by step on how to flash my ROM back to STOCK?
if you want it for warranty reasons then you will need to flash the SPL also to stock. you can just download the latest ROM from HTC website and flash it. it will give you the stock ROM on the existing SPL.
End of the post http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1.
Remember you will also need to go back to stock spl if for warranty purposes.
i have another problem, when in bootloader it wont change from serial to usb but was a week ago
7896zx said:
i have another problem, when in bootloader it wont change from serial to usb but was a week ago
Click to expand...
Click to collapse
nevermind what i said there, for sum reason it works again now
I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks
accountabc said:
I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks
Click to expand...
Click to collapse
That depends. What was your original rom and spl? Are you entitled (via location) to use the new EU rom, eg if you live in America then this may not be acceptable to HTC.
When you boot up the new rom, are the screen colours ok as this will tell you if you have the right spl for your rom? If you have the latest EU rom, I doubt that 1.14 spl would be the right one, but it could be I guess. With the stock rom, you should also get the stock radio. So provided you have the stock rom available to your area, with the correct matching spl and the radio, there is no way to tell of your exploits
Thanks for your reply
The problem is that the screen of my device won't turn on anymore (Device powers on, I can connect with activesync, digitizer works fine) so i have no way of checking if I have the right SPL or not...
I also have no idea what my stock rom/spl/radio version was.. I live in the Netherlands, and through the official HTC site i flashed the latest rom, which included a radio (a radio version was part of the filename). What I'm trying to find out is:
Could 1.14 have been my stock SPL, or was that version never used on any Dutch Blackstone?
If the spl doesn't match the rom (wrong colours) that isn't much of a problem; I can tell them I tried to update my rom because I thought maybe my screen would work again after I installed the latest ROM... But if I have a SPL that was never even used I don't think they will buy that
According to the wiki there are 2 Dutch roms - one would require a 1.14.0000 spl and the other a 1.54.0000 spl. So I guess either of those would do.
When you flashed the rom from the website, where you still using hspl or uspl? Depending on the rom you flashed you will need to flash the matching spl. Do you have the full notation/naming of the rom you flashed. This should give an indication of which spl you will need.
As much as I appreciate ClydeB1 for assisting you, I fail to see a reason for this thread. A thread already exists for flashing advice, i.e. the dummies guide. Also the HardSPL thread exists and has advice on how to flash back to stock. So depending on your query post in either of these.
The initial query and reason this thread was created has been answered, so no need for this thread to remain open. Thread closed
Hello all,
I need to send in my (Dutch) HTC Touch Diamond for warranty. It had reception problems which I tried to fix by installing a new radio rom and hardspl, but unfortunately the problems persisted.
Now I have restored the latest original ROM (2.03.404.3). Only, I never wrote down which bootloader (SPL) was originally on the phone. I bought it brand new in August 2008. Any idea which SPL version would be most likely to be on a phone that old? I installed V1.93, would that be OK?
from my understanding there is only one stock spl, all the others are modified ones maybe im wrong i usually am lol
i sent a diamond in a few weeks ago that was bought brand new in may 2008, i put version 1.35 on it and flashed with the same official rom as you; my device was repaired without problems.
You've restored the stock OS and stock radio already i presume, after restoring the stock SPL you can flash the latest original rom again, cuz as far as i remember the official2.03.404.3 rom also upgrades the SPL to the latest official one (don't shoot me if i'm wrong )
A few questions:
my diamond (mda compact iv) is hard resetting everytime i soft reset after installing the gen.y r5.5 sense 2.1 rom. i have hardspl 1.4.
i've spent all day today ****ing around with the phone. i think my next step is to try flashing an official phone, hard reset, then reflash a different rom, then hard reset again.
1: since it was originally a t-mobile branded mda compact iv, do i need to find the original t-mobile rom or can i just flash any official htc 6.1 rom?
2: do i need return all the spl, radio to the original as well before i flash to an official rom?
thanks.
Hi, since you have hard spl, you can flash any official diamond rom. You don't need to revert spl, or to change the radio. If the official rom has radio inside it will be flashed.
freakzone said:
Hi, since you have hard spl, you can flash any official diamond rom. You don't need to revert spl, or to change the radio. If the official rom has radio inside it will be flashed.
Click to expand...
Click to collapse
I have a problem with my Diamond, HTC USB Sync Drivers which i downloaded
wouldn't work, i can't extracted them. No archives found????
Hi and welcome to xda , what is the os on your pc. From what I remember the hotsync drivers were installed automatically. Try to download the rom again, maybe the RUU was toasted.