Hello!
Just flashed cmex 0.7 .. and looks good ..
unfortunately I am n able to get a connection with A1.net (although it is installed) for i.e. updating weather information, active sync, ...
any ideas??
Thanks!
Regards,
James
try this: http://www.umtslink.at/3g-forum/showpost.php?p=702014&postcount=9
james4711 said:
Hello!
Just flashed cmex 0.7 .. and looks good ..
unfortunately I am n able to get a connection with A1.net (although it is installed) for i.e. updating weather information, active sync, ...
any ideas??
Thanks!
Regards,
James
Click to expand...
Click to collapse
i think you have the wrong gprs authentication setup,
go to: settings->connections->advanced network
navigate to the gprs register and set chap authentication.
i hope this works for you, for me it did
greets schefnrg
Thanks .. its solved ...
Related
hi iv managed to get my gprs working but the mms settings i cant change, iv installed the mms composer that is available here but it wont allow me to create or change the settings
any help is greatly appreciated also does it matter if im using version 2 of wm5 and not the current 3
anyone?????????
I have been ablke to upgrade my M2000 with no problems.
Make sure that you are using version 3 and install all the main patches and the this should work fine for you.
mark1968 said:
I have been ablke to upgrade my M2000 with no problems.
Make sure that you are using version 3 and install all the main patches and the this should work fine for you.
Click to expand...
Click to collapse
will i lose the current programs, contacts, sms.mms msgs, connections by doing this
just did the upgrde and all seems well thank you soooo much :lol:
mods please close this post problem resolved thanks
Hi All,
I need your help please, my diamond is displaying strange unreadable fonts as attached in some applications, the reason for this is enabeling the arabic windows mobile of "informability Fee Jeibi version 6.1 build 09.02.08" the arabic support version released on HTC official support site.
Disabeling the Arabic windows mobile makes these application work fine but of course the arabic letters are not displayed properly.
Steps I have done and didnt solve the problem:
- Exclude the applications from the "exclude/include" functionality in the Fee Jeibi settings.
- modifying the registry font items to increase/decrease and even changing the fonts in "HKLM/System/GDI/SYSFNT/Ht, Nm and Wt" and the same in "HKLM/System/GWE/Menu/BarFnt and PopFnt".
Any ideas to help me please?
Thanks in advance.
I need your help guys, I am discovering more and more applications having the same problem, any advise please?
I use Mobdiv 416 arabizer. It works great with these applications mate.
I did't try the official one..if you want the arabizer I have...tell me and I will upload it for you. I think its better than the one ur using.
Shouma said:
I use Mobdiv 416 arabizer. It works great with these applications mate.
I did't try the official one..if you want the arabizer I have...tell me and I will upload it for you. I think its better than the one ur using.
Click to expand...
Click to collapse
I will be very thankfull if you did this mate, but I wish it won't ask for a hard reset again
Thanks a lot.
ntorki00 said:
I will be very thankfull if you did this mate, but I wish it won't ask for a hard reset again
Thanks a lot.
Click to expand...
Click to collapse
When I installed it, it did not require any hard reset for the mobile.
I think you just have to make sure that the official one you installed is removed completely.
Here is the link mate
http://rapidshare.de/files/40669167/MOBiDIV.416.cab.html
Tell me howz life going after you install ...its working here like a charm with all the other apps.
Shouma said:
When I installed it, it did not require any hard reset for the mobile.
I think you just have to make sure that the official one you installed is removed completely.
Here is the link mate
http://rapidshare.de/files/40669167/MOBiDIV.416.cab.html
Tell me howz life going after you install ...its working here like a charm with all the other apps.
Click to expand...
Click to collapse
Thaaaaaanx, you are the best
It is working great on my diamond with all the other applications too, I had to disable "Fee Jeibi" Arabizer because it is not giving the option to be removed from the system.
Thanks again
ntorki00 said:
Thaaaaaanx, you are the best
It is working great on my diamond with all the other applications too, I had to disable "Fee Jeibi" Arabizer because it is not giving the option to be removed from the system.
Thanks again
Click to expand...
Click to collapse
Your welcome m8. Glad it worked well
is there any cure for this???
a lil bit more description would really help us with your problem-.-
like: recent flashes;
hard spl status;
radio used and so on...
try to give us a little view at your mobile ;-)
Regards
just updated my signature...but it doesnt matter because it is present in almost all landscape menus and with official last ROM too and ofcourse default radio which ended 03...
Hi all....
I'm looking for the HTC Connection Setup 1.5.35353_bs cab with the Telcel settings in Mexico.
Please, Could You helpme???
Thanks
any idea?
Hi guys...
i can't find anything in google.
any hints? please?
here ya go: http://forum.xda-developers.com/showpost.php?p=2886625&postcount=7601
dear sj, i have stayed up for hours googleing in the forums for this and i have checked your cab in your link, but it is not the 1.5 35353
that version also has peru in it. i leave to peru in about a week, hopefully i can also get a hold of it. thank you
ps,
you are doing wonders with the kaiser, r u ever going over to rapahel/fuze?
jhr said:
dear sj, i have stayed up for hours googleing in the forums for this and i have checked your cab in your link, but it is not the 1.5 35353
that version also has peru in it. i leave to peru in about a week, hopefully i can also get a hold of it. thank you
ps,
you are doing wonders with the kaiser, r u ever going over to rapahel/fuze?
Click to expand...
Click to collapse
The actual application is version 1.5.35353.1, however the 'provision.zip' file is smaller than an older Connection Setup I have in my ROM. As the .ZIP file is password protected I can't check the contents, however I assume they are just .XML files with connection settings for specific operators? Is this .ZIP file updated independently?
Andy
sakajati said:
here ya go: http://forum.xda-developers.com/showpost.php?p=2886625&postcount=7601
Click to expand...
Click to collapse
hello my friend can you help me with my operator is in Slovenia Mobitel/Ipko
In the Connection Setp, Cyprus is not shown. Can anyone help? Thanks
Found this in the general forums. Kudos to garak0410 it works perfectly tested on TPC V11 and PDACorner X2 V11!
garak0410 said:
Here's the fix...it works now!!
Just change the following as below:
[HKEY_LOCAL_MACHINE\SYSTEM\Versions]
"Aku"=".5.3.00"
Click to expand...
Click to collapse
So changing AKU => problems with market.
Thanks for sharing, I'll write it to as notice to kitchen.
Anyone know where I can get the cab for market?
joth11 said:
Anyone know where I can get the cab for market?
Click to expand...
Click to collapse
I found mine in XDA forum, look for MS Skymarket
Still no go. I am using the 23047 "stock like" ROM. I changed the AKU which was set to something else. I still get a "serious error" message. I think it may be tied to opera being my default browser... read that on other threads as causing problems... i used the opera remove default cab and IE still reports as not being the default browser.
It is a bug in the build of WM6.5 since it asks if you want to set IE as the default browser, but only gives you a NO button, without a yes button.
So any ideas what I am doing wrong. ... I am using the skymarket cab, and it does download and install (tried both the internal memory and the sd card). When I run the application its self is when I get the encountered serious error message.
did you try a soft reset?
sweet! worked on the TCP's stock-like 23053
nato2k said:
did you try a soft reset?
Click to expand...
Click to collapse
yea, repeatedly. Kinda sucks that there is no "yes" button. I was going to upgrade ROMs but was waiting for a stock like 60, 63, or 64 first.
Maybe if I uninstall opera completely, then reinstall it without letting it think it is default.
--- edit: tried that no go. I am not sure that opera is making a diff. Maybe I just need to flash again, something else might be causing a conflict. I admit that my setup is a little outside of normal, though not that much, but why doesn't this thing "just work".(oops that's an apple slogan)
Not sure why it didn't work before, but it works now, on 23053 TCP's stock like rom.
Thanks for the tip.
nice, +1 - worked on tpc's 23053
Just tried this on TPC Mega V11.
Works great!
Good find!
SF
how can I change the country? I only have 20+ applications, I believe it's because of country setting....
Still No Go on TPC's 23047 Stock Like
I also am using TPC's 23047 Stock Like and still get the same problem.
There must be some other setting which is also causing the problem.
MardiG said:
I also am using TPC's 23047 Stock Like and still get the same problem.
There must be some other setting which is also causing the problem.
Click to expand...
Click to collapse
This was only for the error "Marketplace could not connect because the server is unavailable"
Here is the Error I get
nato2k said:
This was only for the error "Marketplace could not connect because the server is unavailable"
Click to expand...
Click to collapse
My error message is:
Error
We encountered a serious error which requires that you exit Windows Marketplace. If you can't log in after a few hours, please contact Microsoft for help.
nato2k said:
Found this in the general forums. Kudos to garak0410 it works perfectly tested on TPC V11 and PDACorner X2 V11!
Click to expand...
Click to collapse
thanks now my marketplace work
A million thank you's for this.
I didn't even need to soft reset!
problems with marketplace in german 23430
hello,
i have changed the aku tweak to:
[HKEY_LOCAL_MACHINE\SYSTEM\Versions]
"Aku"=".5.3.00"
and the file is correct renamed in
WMMBootstrap.exe.0407.mui
in my kitchen...
need help...
thanks
TPC v11 Worked
Great find. I am no longer frustrated! Thanks!!
Wow, it worked for me too! Thanks a lot for posting. I had all but given up on the market place.
Hello everybody,
I just flashed the new release of CM10.1 by Maclaw and I lost my 3G data connection. I have tried everything: APN settings (even though they were correct), modifying the old settings and also creating a new APN, installing different modem versions, I tried to solve it following this post from a similar problem http://forum.xda-developers.com/showthread.php?t=2548453 ...
The problem is still there, I can call and send/receive SMSs, just the data connection doesn't work, no internet. My carrier is HEYAH Poland.
Thanks in advance for this awesome forum,
Greetings :good:
matapr0 said:
Hello everybody,
I just flashed the new release of CM10.1 by Maclaw and I lost my 3G data connection. I have tried everything: APN settings (even though they were correct), modifying the old settings and also creating a new APN, installing different modem versions, I tried to solve it following this post from a similar problem http://forum.xda-developers.com/showthread.php?t=2548453 ...
The problem is still there, I can call and send/receive SMSs, just the data connection doesn't work, no internet. My carrier is HEYAH Poland.
Thanks in advance for this awesome forum,
Greetings :good:
Click to expand...
Click to collapse
pleas send maclaw a PM (you are both from Poland, so you can talk in your own language ... )
Thanks mate, I will contact him. I live in Poland but unfortunately I don't speak Polish, I'm a spaniard studying in Poland
OK, problem detected. It's not a problem of the phone. The problem is the simcard: with other simcards the data connection works properly...