Now I just flashed a ROM onto my Tilt, HardSPL 3.56, and it gets to the HTC logo, and there's some text over it, and it won't continue. Did I mess up badly? Please help!
EDIT: I was flashing the latest Anryl ROM.
So it shows the at&t logo, with the R D G and numbers, then goes to the...
OMG NOW ITS SHOWING "WM6.5"!!!! dunno what to do though.
Thanks for all your views, I guess! I waited a while and it boots up...patience is key, guys!
Related
Like a [email protected]$$, I tried flashing my treo 750 with one of Alex's Kaiser WM6.1 cooked roms - now my phone is screwed up!
It completed to 100%, and went to a black screen. Now It wont do anything. Hard reset returns to black screen, reflashing all of the various treo roms result in the same black screen. The black screen is lit up but no palm logo or boot to windows. I am able to bring up the bootload flash tool, and it will load flashes but non fix the issue.
I dont see how flashing it with one of those roms would cause it to be this screwed up?? Wouldnt that flash be able to be completely reflashed with a working version?? What is it about those roms that gets flashed that cant be overwritten by a treo rom??
Anyone help please! Thanks!
Give treo recovery rom a shot, dl avail from palm website
mb
Thanks,... I tried 3 different recovery roms and non corrected the problem....
Sounds to me that you flashed it with an incompatible ROM and it cannot get into a state to properly take the recovery flash. May require servicing to unbrick it.
Did you have HardSPL before flashing? If you did, flasing other os shouldn't be a problem, if not... It doesn't sound good...
erickufrin said:
Like a [email protected]$$, I tried flashing my treo 750 with one of Alex's Kaiser WM6.1 cooked roms - now my phone is screwed up!
It completed to 100%, and went to a black screen. Now It wont do anything. Hard reset returns to black screen, reflashing all of the various treo roms result in the same black screen. The black screen is lit up but no palm logo or boot to windows. I am able to bring up the bootload flash tool, and it will load flashes but non fix the issue.
I dont see how flashing it with one of those roms would cause it to be this screwed up?? Wouldnt that flash be able to be completely reflashed with a working version?? What is it about those roms that gets flashed that cant be overwritten by a treo rom??
Anyone help please! Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=366771&page=3
folow the step by step on:
http://forum.xda-developers.com/showthread.php?t=366771
let me know if it worked for you, If it doesn`t solve your problem, we will try other things...
hello folks....
first: sorry for my bad english...
second: i've got a LITTLE problem:
last nite i've tried to flash a new rom on my wizard...
it wasn't the first time.. but... the second!!
something goes wrong...
during the upgrade, windows crashed (blue page), now, if i press the power button, lights come up and its stuck for at least two hours on a white screen..
then, come up the splash screen where are wrote IPL, SPL, ecc...
i write them down:
IPL 2.21.0001
SPL 2.21.Olip
GSM 02.07.10
OS 10.1.0.811 (isn't bad???)
now, the fone stuck forever...
i can't enter in the bootloader so i can't flash it again whit a RUU..
but, the strangest thing... is: the splash screen is from the old rom...
any suggestion??
ah... the rom is this:
XM6r5
http://forum.xda-developers.com/showthread.php?t=355591
how can i fix it? yes... i know... i messed up....
thanx for your answers... even if i can't recover!
If it displays IPL/SPL,then its in Bootloaders,you can flash it in bootloaders.take out the battery for awhile say 30-60 minutes and put it back and try to get into bootloaders and flash the rom.
As its already HardSPL,there shudn't be any problem,just a bad flash due to pc crash.
ok... did it... now, wm starts... but, not everytime.... most of time, it stuck on the famous white screen...
the OS still 10.1.0.811.. i think that is not normal...
how can i "flashback" evreything? i mean... which rom do i use, to have a good base to flash some other rom? my device is a G4.. so, the "love" rom is ok?
EDIT:
i flashed the "wizard_love" rom.. not any problem...till, i've rebooted... white screen again... but when i pressed the power button, it rang like when it seys you "u gonna lose some data" (or something like that)...
SO... Is the screen F******(gone)?
hmmm,perhaps the LCD is a gonner,digitizer or the flexi-cable is creating problems.If you know something about disassembling the device,check if the flexi-cable is properely fixed,otherwise,take it to some repair shop.
simulat problem
hi guys I recently flashed my wizzard with the latest snn edition everything was fine but i tried to install some other program which i did not like so i uninstalled the program system asked me to reboot but now it got stock on the gray windows mobil snn screen i've tried to hard reset with no luck i remove the battery over night still no luck it is bricked? THX
hello!
I am new here and i got one big problem.
So please help me!
I tried to flash my tytn II with this rom(ENDED- 28/V/2009 Anryl WM⑥.⑤ 21725 FINAL ULTIMATE(101RAM) -ENDED- ), but when i finished the flash, my phone want to boot. It stops on black screen and show "HTC"
If someon know how to fix it, please help me!!
R 1.27.16.21
G 22.52.88.13h
D 3.34.00.00
did you flash jumpspl and hardspl first?
Yes i did.
I did everything like it said in http://forum.xda-developers.com/showthread.php?t=433835 and my phone is stuck in bootloader. So how can i reflash it? i tried to flash it again with sd card but when i use power + camera + stilus to get bootloader, in a second there is a white screen where is written that there is no image, and it go back to three color screen mode, and in the bottom is a white screen where is written "serial"
When i try to flash it with activesync there is an error 262. I spend a lot of time reading many posts here, but i did not find enything what help me.
Any sugestions?
Thanks!
Bro, did you solve it? please let me know. Same issue and as described in the faq's tried using MTTY but that one also does not connect.
Hi folks,
i used several roms from here, worked nicely.
had spl 1.33.OliNex i downloaded latest energy rom and did update from SD.
it wrote update success, then i reseted topaz.
now im stuck on boot screen with tmobile logo and RDG message.
i tryed to upgrade radio and do the flash again but again success message and screen hang on tmobile logo. tryed hard resets etc, same result.
i just got
R 4 49 25 91
G 61.44etc 25 35U
D2.13.64695
message on bottom, nothing more.
i wonder if its not problem that i have older hspl, but i dont know how to upgrade it without having system booted and connected to PC...
Anybody can help me?
-------------------------
managed to update spl to 2.51,
did the flash again, again success message and this time it runs
So, maybe it will at least help other ppl
grapher said:
Hi folks,
i used several roms from here, worked nicely.
had spl 1.33.OliNex i downloaded latest energy rom and did update from SD.
it wrote update success, then i reseted topaz.
now im stuck on boot screen with tmobile logo and RDG message.
i tryed to upgrade radio and do the flash again but again success message and screen hang on tmobile logo. tryed hard resets etc, same result.
i just got
R 4 49 25 91
G 61.44etc 25 35U
D2.13.64695
message on bottom, nothing more.
i wonder if its not problem that i have older hspl, but i dont know how to upgrade it without having system booted and connected to PC...
Anybody can help me?
-------------------------
managed to update spl to 2.51,
did the flash again, again success message and this time it runs
So, maybe it will at least help other ppl
Click to expand...
Click to collapse
Did you try going into bootloader first and then running the RUU.exe?
Or you can look HERE about making a Goldcard with Qmat (#6)
EDIT: Didn't see that you updated your post, congrats on gettin it workin again though
Hello, i was tired of duttys rom so i decided to install the orginal 6.5 windows rom.
It got to 16% and then it got stuck, i tried again a couple of times but it stopped at 16% all the time.
Then i tried to hard reset it, nothing.
Now i tried to install the newest dutty rom.
Now i'm stuck at the "Touch diamond 2" loading screen.
How the hell do i fix it?
Also it loads the RGD thing, but then it just freezes
Please help :s
What does your SPL show?
My spl? Do you mean the RGD thing? if so:
R: 4.49.25.91
G: 61.44etc.25.35U
D 2.53.Dutty
No, put the topaz in bootloader and you can see your actual SPL
SPL-1.33.0linex (stupid 5 mins for edit..)
- Turn off your device using the power button
- When the device is turned off press simultaenously the volume down button + Power button
- Your device will startup in Bootloader mode with band tricolor
Thanks for the help. You sure saved my weekend.
(Got help over pm)
**Deleted**
Nuggi, would you be so kind and share the info with the rest of us, as I have exact same problem as you did in the first post.
Phone dropped to ground, screen got bit smashed so I thought to send it to repair. I put original SPL and 6.1 rom inside and boom, doesn't boot anymore.
EDIT: Found this post, checking now if it works. http://forum.xda-developers.com/showthread.php?p=7191733#post7191733
EDIT2: Success! The software started all fine.