Plz help me n sorry 4 my bad english b,coz i m new hear.i have a xda ii pda n i upgrade it wm2003 to wm6.1 but i dont do d hard reset n now my pda is on o2 screen n i dont do anything if press reset button+camera+record button for hard reset it no screen show if i plug in for charge no light show n if i try to connect to pc d pc says usb erorr n no light show now what can i do? Plz help me
dhellb0y said:
Plz help me n sorry 4 my bad english b,coz i m new hear.i have a xda ii pda n i upgrade it wm2003 to wm6.1 but i dont do d hard reset n now my pda is on o2 screen n i dont do anything if press reset button+camera+record button for hard reset it no screen show if i plug in for charge no light show n if i try to connect to pc d pc says usb erorr n no light show now what can i do? Plz help me
Click to expand...
Click to collapse
when you pressed reset button+camera+record button, did you see the screen that has:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
if you couldn't see this option, try reflashing the rom..
gtrix said:
when you pressed reset button+camera+record button, did you see the screen that has:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
if you couldn't see this option, try reflashing the rom..
Click to expand...
Click to collapse
Thank you for replay.you say reflashing rom why i can do it? My pda is not connect to my pc.plz help me now what can i do?
Between hope and hate
dhellb0y said:
Thank you for replay.you say reflashing rom why i can do it? My pda is not connect to my pc.plz help me now what can i do?
Click to expand...
Click to collapse
It is absolutely necessary that your device does enter bootloader mode.
Press On/Off button, DPad and Soft Reset all together!!
Your device should show 'Serial' now! Connect to your PC and the device should change to: 'USB'.
Otherwise you got a nice paperweight now, and that would be bad.
Did you follow this, as you flashed the first time?
http://forum.xda-developers.com/showthread.php?t=332215
Did you use XP od vista 32bit (64bit does not work!?!) and did you follow this guide?
http://forum.xda-developers.com/showthread.php?t=428469
Never disconnect the device or the power-charger while flashing.
Try to reflash to get your sweet back, for us it is the most important to find out what went wrong to prevent others to do the same mistake.
Good luck!
Related
I was trying to upgrade the rom , it was at the third part (upgrading CE) then computer locked... now all i see vertical lines at my XDA IIS can someone help me please ?
No power , no reset , computer cannot connect to the XDA please help me
oh, thankyou very much, I tried many times with many ways but still failed.
Thanks all.
Great
[CHECKCEID_TYPE]=1
RELOAD said:
No power , no reset , computer cannot connect to the XDA please help me
Click to expand...
Click to collapse
Don't worry man, Now you need to enter boot loader
Press power + camera + soft reset
Now you can connect to your PC and Upgrade again
Thanks i did it and works , sorry for edit my first message ,
OK i did a search but did not find anything really related..
a friend of mine at work here just handed me his 8125 after "attempting" to flash his ROM. Not sure what the heck he did BUT
1) the usb is not recognized so not active sync.
3) 3 battery meter only shows a plug (lower right ) yet the battery works.
the phone does recognice the charger..
HELP !!!
thanks in advance !
Reset, enter bootloader, reflash
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
DUlrich1227 said:
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
Click to expand...
Click to collapse
Camera Button is the only one you need to hold when resetting...
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
DUlrich1227 said:
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
Click to expand...
Click to collapse
Press the reset (or power down your device by holding the power button until you get the Okay to turn-off warning).
HOLD the camera button as your device powers up. This will get the BootLoader
just woke up and read your reply thanks ..
this is what i ended up doing
i bluetoothed from one of the roms enterbootloader.exe was able to run it
than ran one of the earlier rom upgrades..
re running the lockiwizb and will install sumters rom2
one question if you read this .. on both of the phones 8125's i get an error at the end of the bat file when running the lockiwiz.. is this normal ? is it because it was already ran once ? i am running it from the root (C
Hello
today i installed an application from untrusted source and it bricked my HTC touch diamond
it gets stock for 5 mins on the htc logo screen then displays "the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source, Press SEND to reset your device or press any other button to cancel, this operation will delete all your personal data and restore the device to its factory default settings."
i pressed all the buttons on my diamond but none works.
i would really be grateful if anyone helps me to fix my HTC (without erasing all the data if possible)
thanks for your time
have you tried a hard reset?
I can Hard reset it but is there any other way to fix it without losing the data or any way to copy the data to my PC while the device is bricked?
thanks
If you are able to reset your phone via a hard reset, it is not bricked. Backup people!
back up..........
and back up again
chribruu said:
If you are able to reset your phone via a hard reset, it is not bricked. Backup people!
Click to expand...
Click to collapse
Whats the best way to back up?
Thanks
I'd recommend SKKV tols along with PPC PIM backup (don't forget about your registry.
you can find a lot of freeware backup apps over at freewareppc
Resco Backup is awesome if you don't mind paying a few bucks... How much is your valuable data worth to you?
I fixed my device thanks a lot for your help everyone!
adwinp said:
I'd recommend SKKV tols along with PPC PIM backup (don't forget about your registry.
you can find a lot of freeware backup apps over at freewareppc
Click to expand...
Click to collapse
how can i backup the phone when it cannot estabilish connection with activesynch?
i did some egistry fauts, now the phone boots up, but there is just balck creen ant the start button, the phone button and the batert/network button
when i tpa on start button only appears the progrma section, when i tap on it nothing happens...
the biggest problem that ii cannot make a connection between the pc and the diamond...
what shuold i do to fix the problem?
You can enter the bootloader and connect it via USB there.
Enter + up on volume + stylus should enter a tri-color screen.
intx said:
You can enter the bootloader and connect it via USB there.
Enter + up on volume + stylus should enter a tri-color screen.
Click to expand...
Click to collapse
what is the enter in this case?
soft reset or the power button, or the round button which i use for taking pics?
i got to the bootloader, there is the tricolor/4colour/ screen, red green blue and white,
in the red writes daim100 mfg64m
spl+1.40. Olinex
MicroP-Diam (led) v11
in the green field
fsoc-diam stage_pvt v0x32
blue field is blank
in the white field it writes> usb
but i cannot connect tothe pc, so dont have activesynch and cbbot flash the ppc...
PROBLEM SOLVED
http://forum.xda-developers.com/showthread.php?p=3251939#post3251939 #23
Was asked to re-post in upgrading and wm6
I had my 8125 flash a bad rom and was stuck on splash screen.
fixed it with mtty1.42
connect in bootloader mode with usb
choose usb connection not com1, or com2
you will get a white screen press enter
then you see cmd>
type format will show you what you can format
you want to format the os part starts with a b cant remember exactly
once its formated flash a rom and you should be good to go if you have any questions just let me know.
I dont have the option for USB.. just COM1 and COM2
Please advise??
Have the same problem. I'm running Vista. Do I need XP to do this?
or, is it possible to flash via MiniSD?
Then you probably have active sync on turn if off and disable it so when you plug in the usb cable it doesnt automatically come up.
Sorry took so long to get back
I had the same problem when i've flashed the black diamond wm6.1 rom, but all i had to do is to turn the device into bl mode (camera key + power key) and then reflash it..
If that wont work for me again ill give your tip a try. thanks!
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Remove your Micro SD-CARD, and enter in flash mode! Volume down + power on!
Open the Update Phone Utility with the rom of your choice! Remember to rename your rom to: KOVSIMG.nbh
Sorry for English.
Faffa_mcr said:
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Click to expand...
Click to collapse
first time u must delete first the previous version on ur sd card... than u can update the new one... and dont forget to tasks 29 before u flash the rom...
Sorry guys, but when I enter in flash mode, and I press the power button and it should load the ROM, instead it always restart after 2-3 second. I don't know what to do..please help me!!
It sounds to me that you're not holding the buttons down correctly
paul c said:
It sounds to me that you're not holding the buttons down correctly
Click to expand...
Click to collapse
I tried again, but the result is the same.. uff..
hardspl
Faffa_mcr said:
I tried again, but the result is the same.. uff..
Click to expand...
Click to collapse
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
ahmadin said:
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
Click to expand...
Click to collapse
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
I looked that the power button have a red light, and when this turn off, it go to bootloader mode, but after few second (it's in update mode) the phone turn off..
Someone has the same problem? I don't know what to do, I'm desperate! I can't use my phone
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Faffa_mcr said:
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
Click to expand...
Click to collapse
did you try another usb port of PC?
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
orkhanahmadov said:
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Click to expand...
Click to collapse
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
Very good explaination....
Faffa_mcr said:
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
Click to expand...
Click to collapse
did you try method that wrote first.
and off course try another usb port, or another usb cable.
because if the phone did'nt recognized by PC, it means there's problem with cable or usb port if other things are OK.