XDA IIS DEAD WHILE UPGRADE - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I was trying to upgrade the rom , it was at the third part (upgrading CE) then computer locked... now all i see vertical lines at my XDA IIS can someone help me please ?

No power , no reset , computer cannot connect to the XDA please help me

oh, thankyou very much, I tried many times with many ways but still failed.
Thanks all.
Great
[CHECKCEID_TYPE]=1

RELOAD said:
No power , no reset , computer cannot connect to the XDA please help me
Click to expand...
Click to collapse
Don't worry man, Now you need to enter boot loader
Press power + camera + soft reset
Now you can connect to your PC and Upgrade again

Thanks i did it and works , sorry for edit my first message ,

Related

Xda ii not start after upgrade wm6.1

Plz help me n sorry 4 my bad english b,coz i m new hear.i have a xda ii pda n i upgrade it wm2003 to wm6.1 but i dont do d hard reset n now my pda is on o2 screen n i dont do anything if press reset button+camera+record button for hard reset it no screen show if i plug in for charge no light show n if i try to connect to pc d pc says usb erorr n no light show now what can i do? Plz help me
dhellb0y said:
Plz help me n sorry 4 my bad english b,coz i m new hear.i have a xda ii pda n i upgrade it wm2003 to wm6.1 but i dont do d hard reset n now my pda is on o2 screen n i dont do anything if press reset button+camera+record button for hard reset it no screen show if i plug in for charge no light show n if i try to connect to pc d pc says usb erorr n no light show now what can i do? Plz help me
Click to expand...
Click to collapse
when you pressed reset button+camera+record button, did you see the screen that has:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
if you couldn't see this option, try reflashing the rom..
gtrix said:
when you pressed reset button+camera+record button, did you see the screen that has:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
if you couldn't see this option, try reflashing the rom..
Click to expand...
Click to collapse
Thank you for replay.you say reflashing rom why i can do it? My pda is not connect to my pc.plz help me now what can i do?
Between hope and hate
dhellb0y said:
Thank you for replay.you say reflashing rom why i can do it? My pda is not connect to my pc.plz help me now what can i do?
Click to expand...
Click to collapse
It is absolutely necessary that your device does enter bootloader mode.
Press On/Off button, DPad and Soft Reset all together!!
Your device should show 'Serial' now! Connect to your PC and the device should change to: 'USB'.
Otherwise you got a nice paperweight now, and that would be bad.
Did you follow this, as you flashed the first time?
http://forum.xda-developers.com/showthread.php?t=332215
Did you use XP od vista 32bit (64bit does not work!?!) and did you follow this guide?
http://forum.xda-developers.com/showthread.php?t=428469
Never disconnect the device or the power-charger while flashing.
Try to reflash to get your sweet back, for us it is the most important to find out what went wrong to prevent others to do the same mistake.
Good luck!

[Problem - need help] Almost certainly unflashable diamond

Hi all,
First of all I must tell you that my baby has a broken vol down button (probably because of the internal flat connection). I used to flash it using the RUU from Windows mobile but now, after I changed the language value in the registry, the phone is stuck and never completes to load wm. The pc does not recognize it like if it was not connected at all. Is there any way to recover it ?
They just stole my blackstone and I can't afford to buy another htc before a few months, so any help is appriciated
Did you try deleting the registry key: Or even changing it back?
I can't access the device anymore, it is stuck on windows mobile loading screen (customized by energy). The onlyway I could save it is finding a way to put it in bootloader mode but without using the volume down key (that is broken)
The only way to restore your Diamond is to repair the volume button !!!!!
Have you tried a Hard Reset? {I know, but it'd be something that I would forget to do}
The only way to restore your Diamond is to repair the volume button !!!!!
Click to expand...
Click to collapse
I am afraid you are right ...
Humblehippie said:
Have you tried a Hard Reset? {I know, but it'd be something that I would forget to do}
Click to expand...
Click to collapse
It would solve the problem if there was anyway to do it without using the vol.down button.
Volume down key broke
Need Help. I need to enter in my device in bootlader mode, but my volume down key is broken. I can't connect with the device. It's stopped in splash screen

[Q] plz help!

hi,
after i setup GoogyROM_v3.4 WM6.1 my phone just reset and reset and doesn't boot . hard reset doesn't work and i can not install other roms .
digitaldesign said:
hi,
after i setup GoogyROM_v3.4 WM6.1 my phone just reset and reset and doesn't boot . hard reset doesn't work and i can not install other roms .
Click to expand...
Click to collapse
Set your TD2 into the bootloader-mode:
- Take the battery out
- Wait a few seconds and reseat it
- hold the volume-down button and while holding switch the phone on
Now you will be in bootloadermode (tricolor), so you can conntect it to your pc via usb and flash again (I suggest a stockrom)
Thanks so much.my problem was holding down and up volume together and doing hard reset instead of loading boot loader.
help me now
hello dears
please help me :
how to remove "solitaire" and "bubble breaker" in pocket pc ?
tanks for ur help
mohamamdsina0611 said:
hello dears
please help me :
how to remove "solitaire" and "bubble breaker" in pocket pc ?
tanks for ur help
Click to expand...
Click to collapse
1. new question (vour post is not related to the topic of this thread) = start a new thread
2. have you seached this forum?
mohamamdsina0611 said:
hello dears
please help me :
how to remove "solitaire" and "bubble breaker" in pocket pc ?
tanks for ur help
Click to expand...
Click to collapse
I am sorry to tell you that you can't remove any applications which are integrated in a ROM.

Samsung galaxy ace brick

Hello, I have samsung galaxy ace, android 2.3.6, and I install rom manager, and telephone not power on, not work volume down + power + home selection, not working power = home selection, help my please, how unbrick phone.
wrong section
u had to post in general
anyway heres answer
http://forum.xda-developers.com/showpost.php?p=22416493&postcount=5
just for other people, DON'T USE ROM MANAGER to our Ace, because too many issues that it will brick our device, so be careful, and from other forum, also don't use Font Changer coz that can brick too
my computer connect to phone, but hold power+vol down+home button not react
mv_style said:
wrong section
u had to post in general
anyway heres answer
http://forum.xda-developers.com/showpost.php?p=22416493&postcount=5
Click to expand...
Click to collapse
vRiDeRv said:
Hello, I have samsung galaxy ace, android 2.3.6, and I install rom manager, and telephone not power on, not work volume down + power + home selection, not working power = home selection, help my please, how unbrick phone.
Click to expand...
Click to collapse
You must send it to Samsung Assistance. ROM MANAGER HARD BRICKS GALAXY ACE. No other solutions, sorry man.
vRiDeRv said:
my computer connect to phone, but hold power+vol down+home button not react
Click to expand...
Click to collapse
if u knowed to follow steps excatly u would fix your phone -.-
Send it for service man..
If you have followed everything and you can't still revive, better send it to the service center.
mohanlink said:
just for other people, DON'T USE ROM MANAGER to our Ace, because too many issues that it will brick our device, so be careful, and from other forum, also don't use Font Changer coz that can brick too
Click to expand...
Click to collapse
theres no issue with the font changer....
vRiDeRv said:
Hello, I have samsung galaxy ace, android 2.3.6, and I install rom manager, and telephone not power on, not work volume down + power + home selection, not working power = home selection, help my please, how unbrick phone.
Click to expand...
Click to collapse
1. prepare odin for flashing
2. connect your usb cable
3. insert the battery into your phone while pressing power + home + vol down
4. itll get into download mode
5. click start...
6. wait.............
7. enjoy
i suggest you flash mush69 rom
i used these settings in odin while my phine was hard bricked while flashing mush69
the .ops file as ops
apboot file as boot
modem file for phone
code file for pda
and csc file for csc
dont forget to hit the thanks button
Same here ...
It happened the same to me like 4 month ago... the phone didnt respond at all, rom manager fried my motherboard, so i send it to ASC but i told them that the phone just one day it tuned off and and never work again, after wait for 1 week they change it to me for a new one for free xD
Unfortunately if rom manager fried your motherboard too... it's the only solution.
this is what u get for not reading posts before doing somehing as dangerous as using rom manager anyway send it to service center tell them Kies crashed while updating XD
Doo:DAce said:
this is what u get for not reading posts before doing somehing as dangerous as using rom manager anyway send it to service center tell them Kies crashed while updating XD
Click to expand...
Click to collapse
Dats D best reason.. but anyways if they dont accept.. bring it to me. Ill flash it
Sent from my GT-S5830 using XDA
Dark_Slayer said:
1. prepare odin for flashing
2. connect your usb cable
3. insert the battery into your phone while pressing power + home + vol down
4. itll get into download mode
5. click start...
6. wait.............
7. enjoy
i suggest you flash mush69 rom
i used these settings in odin while my phine was hard bricked while flashing mush69
the .ops file as ops
apboot file as boot
modem file for phone
code file for pda
and csc file for csc
dont forget to hit the thanks button
Click to expand...
Click to collapse
People could not border to read and understand. End up brick their phone. Last thing, could not see thanks button and hit it.
Doo:DAce said:
this is what u get for not reading posts before doing somehing as dangerous as using rom manager anyway send it to service center tell them Kies crashed while updating XD
Click to expand...
Click to collapse
But when that happends kies gives u a code, then u connect it again and u can do an emergency rescue or something like that :S
Then let's consider power failure and PC turn-off
Like someone already said just send it to samsung service and with an inocent face say "I dont know what happened, it just never turned back on " and they cant find out the real reason it bricked so they will fix it
ibnoor said:
People could not border to read and understand. End up brick their phone. Last thing, could not see thanks button and hit it.
Click to expand...
Click to collapse
One of dem r u!
And if u cant see d thanks button then press ur ti**
Sent from my GT-S5830 using XDA
Simple to unbrick ace
just press volume down home and power key and then insert battery. It will start with download mode then flash with ur favorite roms and use ur sexy galaxy ace as it was new
Sent from my GT-S5830 using XDA
tjrocks said:
Simple to unbrick ace
just press volume down home and power key and then insert battery. It will start with download mode then flash with ur favorite roms and use ur sexy galaxy ace as it was new
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Naw.. rom mngr bricks are stubborn.. it wont switch on in ANY mode.. speaking from my noobish experience.. :/
Sent from my GT-S5830 using XDA

Need Help Please....

Hello Friends,
While I'm trying to change the ROM for my phone via Odin, my phone is stopped and now 3-buttons function don't work, I tried many hard rest but no response,
what is your advice?
Thanks in advance
Hello Guys,
Please any help,
I tried
1. Volume UP + Menu + Power = doesn't work
2. Volume down + Power = doesn't work.
The phone is dead...
Any Help>>>
have a look here http://forum.xda-developers.com/showthread.php?p=30415128, if you have totally hard bricked it this maybe one of your only options http://forum.xda-developers.com/showthread.php?p=19003060#post19003060
You need a usb jig.
What is USB jig?
alisaher2000 said:
What is USB jig?
Click to expand...
Click to collapse
Ok I know now what is USB jig.
thanks I will do it.
alisaher2000 said:
Hello Friends,
While I'm trying to change the ROM for my phone via Odin, my phone is stopped and now 3-buttons function don't work, I tried many hard rest but no response,
what is your advice?
Thanks in advance
Click to expand...
Click to collapse
Save your bricked GT-i9000

Categories

Resources