HELP!! no signal after flash radio 1.56.70.11 - Palm Treo 750 ROM Development

Hi all,
something goes wrong after flashed 1.56.70.11 on my phone, after logged into wm, there is no signal at all!!
I tried to downgrade to offical at&t firmware (GSM and ROM) but not work.
also tried to unlock radio by using cheetahunlocker, but athena unlocker always hangs at the last step.
anyone encountered similiar issue or know how to fix it?
ps. I have hard spl installed.
thank you!
==================Update 5/8 ==============
it looks like I flashed a corrupted radio firmware.... sigh...
even if I re-flash a correct radio firmware, it won't get back to work.
I am now going to send my treo back to repair

I encountered the similiar issue, I tried serveral ways to downgrade the radio including using mtty, but all did not work.
It's very neccessary to find a way to downgrade the radio to lower edition.

Related

Old Radio Stack Won't Upgrade

[writing from work in a hurry, so excuse me for not having all my details in front of me]
I'm a long-time avid user/flasher of the Wizard who recently bought an old BA on eBay for my wife. First thing I did was download the xplode WM5 ROM and flash the sucker. Very nice and now up-to-date.
Call volumes sucked, so I checked her Radio version, and it was 1.02 or something ridiculously old. I tried to flash the newer 1.15 Radio Rom using the bootloader app that came with it (MAUUpdate something). I got a country code error, so I added the special line to the config file to cheat.
Now it starts the process and never gets past 0% on radio flash. Just hangs. And then some strange 114 error when it finally dies.
I've tried with the newest MaUpgradeUt_noID files I could find. I even tried the 1.13 Radio ROM with no change.
I even re-flashed to WM2003 and tried to flash just the Radio from there. Kept getting "wrong device" message or connection error or something. I tried multiple times in a row (one post suggested the first time will error but second time will work).
I did SIM unlock just in case (Cingular on Cingular so shouldn't have been a problem).
Any suggestions out there? I think I've tried everything!
And yes, I've read all posts and wiki's. (Usually I read only Wizard, but have extended my reading to cover the BA).
Have you tried downgraging to WM2003 then upgrading to Radio 1.15 then finally back to WM5?
I had upgraded my radio ROM when still on WM2003 and found no problems!
xummy111 said:
Have you tried downgraging to WM2003 then upgrading to Radio 1.15 then finally back to WM5?
I had upgraded my radio ROM when still on WM2003 and found no problems!
Click to expand...
Click to collapse
yes, I did. mentioned that above.
I get either country code error (or after correcting that per the wiki advice, I get long period of hang followed by an odd error 113. I think.
does device origin matter? my BA is from ebay and the getdeviceinfo.cab leaves me a blank result except model number and a few random numbers...
I take it that when everyone else flashed to WM5, they followed the simple Wiki instructions and everything went fine? I think I got some odd-ball sub-model that is resistant to Radio flash.
Downgrade Your BA to the WM2003SE, then unlock it with xda3_all_unlock-v1.6_138.exe tool (You can find it in the BA forum here with description how to use it) then try to flash the Radio ROM You want....And then You might upgrade to WM 5.x again if only You wish.
I've tried one of the other sim unlock apps already (successfully) without solving the problem (was tried on WM5). I'll try the order of downgrade, unlock, then upgrade and see if it works.
Thanks for the suggestion.
Jeremy how did it go? are you able to upgrade to the latest radio rom? I also have the same problem as you do. Do you mind telling me the steps if you somehow able to upgrade to latest rom?
this worked for me. after you flash to a new rom (like xplode's), do not take out the BA yet. flash to the new 1.15 radio rom. then you can do the no/yes/yes routine.

Flashing Radios

i have tried the SSPL and it works, i can flash the 3 roms i have found for the breeze
RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3
RUU_BREE100_1.32.251.1_1.29.00.10_HTC
RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP
but since i flashed the 1.38 radio rom without using this sspl. whenever i use the sspl i can only flash the rom not the radio. my phone is now stuck on the 1.38 radio which drops calls after about 30 mins and the battery life is really crap, i am on area where u get full 2g or 1 bar of 3g so its doing its trademark searching and killing the battery.
I have tried duttys tool with the radio extracted and put on the SD card and flashed but no joy.
my device is not SuperCID i just use the SSPL to bypass it.
anyone got any ideas how i can flash the 1.29 radio or for that fact any radio to phone instead of the rom?
i've read that many have tried 1.20 radio to solve a few problems but i have no idea how i can flash this. I have tried to make my own rom with the tools here but again they just flash the new OS living the radio 1.38.00.10. i am downloading RUU_Radinly_1.20.31.10.exe and will flash it if i knew how. SSPL just turns around and says invalid ID error 244. so its like the radio isn't designed for this device.
anyone got any idea ?
1.29 is even worse than 1.38... Missed calls in full GSM coverage (4 bars), horrible sound quality (either you or called party can't hear most of the conversation)... Don't even try it!
And concerning the problem not being able to flash new radio:
As I already wrote in this thread, flashing Radio ROM 1.29 (and above) also flashes new Radio Bootloader 0108 (different thing than Phone bootloader) which requires SPL 1.09 (or newer) to flash Radio ROMs.
Current SSPL for Breeze is based on some older SPL which, as you found out, isn't compatible. Until someone creates SSPL for Breeze based on SPL 1.09 or SPL 1.10, you're stuck just like me...
thanks very much for the post explaining it. i have read someone might make a new sspl with the new spl's in mind so as you said, we have to wait and i guess i will. i am however going to send my breeze back to HTC because of the constant dropping of calls whether it is 10seconds or 35 mins, it drops it without fail.

Problems updating Radio ROM

Hi all,
I have a Spanish Vodafone P3600. (S300). I've run into problems while updating the radio ROM and several other things.
I've managed to change the SPL, all versions, no problem. Even the hard SPL. The problem arises with almost ALL ROMS and ALL RADIO ROMS. I put the PDA in bootloader mode and I begin the updating process. Well, it stays at 0% all the time, both in PC screen and PDA screen. When I am tired of waiting (more than 30) minutes, then I have to take the battery off. The PDA goes into bootloader and I have to apply the unbrick procedure.
I have only been able to put the FAMAN 3.5 Spanish ROM (WM6) so the PDA works when I unbrick it. However, it does not have RADIO ROM and it shows "no GSM" at boot and obviously I cannot use it as a phone.
Is it broken? Why can't I flash the radio ROM? Somebody with a similar problem?
Thank you all very much in advance.
Best,
Unsolvable problem
Thanks all for the feedback. Pof was kind enough to address the problem.
I ditched the radio bootloader (not the regular bootloader) and a a result I cannot flash the radio. It seems that the phone has to be sent for repair.
"if it works... don't touch it" I should have paid attention to this

Cry for help - missing radio rom

Hi everyone.. First post and I think this is a great site. I've managed to flash a wm6 rom to my Orange SPV m700, and although it worked great for a while, I decided to flash my radio rom (initially 1.16.00.00) to 1.50.08.11 not a great idea it would seem, as after a successfull (so it seemed) flash and a reboot, the I now appear to be missing both a radio rom and a gps rom!?!
Can anyone help? I've tried flashing back to a 'orangeuk' WM5 backup (created by someone on this this forum) and I'm having no luck what so ever. The downgrade to WM5 stalls at 82%. My gut suspicion is that it's failing at the radio rom, and I can (sort of) prove this when trying to flash the radio rom - it fails at 0%
PLEASE HELP
Update on this.
Downgraded from 1.30 Hard SPL to 1.20, tried flashing Radio Rom, again no joy. Have also attempted upgrade from SD card - again no joy.
Anyone?, Anyone?... Bueller?.. Anyone?
Just to add, there's no Radio/GPS or IMEI number.. I've seen other people with the same problem but no 'real' guide to fixing..
Just tried (on a whim) to downgrade the radio software down to to 1.16.00.00 using the SD card (basically trying to use Pof's unlocker radio rom) but still no joy, using the SD card just get's about 10% of the way along the progress bar and stops..
I'm struggling here folks
k0pp0 said:
Just tried (on a whim) to downgrade the radio software down to to 1.16.00.00 using the SD card (basically trying to use Pof's unlocker radio rom) but still no joy, using the SD card just get's about 10% of the way along the progress bar and stops..
I'm struggling here folks
Click to expand...
Click to collapse
Try Des' Crash Proof SPL in my signature.
i have same problem .... can't find a solution if you manage to fix it please post
Never did get this working, ended up having to get a replacement phone.. Just debating trying it again, as my current (white) Orange SPV M700 hangs nearly every saturday (bizarre).

No network after new ROM :(

I just flashed my Diamond with the: RUU_Diamond_HTC_NOR_2.03.409.1_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I'm an norwegian that's in the US studying, so they only gave me the norwegian version. Anyways, everything worked fine until flash, but now my phone refuses to register on the network (AT&T)!
Took the sim-card back to the at&t nokia phone, worked the first time...
I really wants to use my Diamond instead of the crappy nokia, but it would be a shame to downgrade to 1.93 (which worked just fine...).
Someone, please have a solution for me?
simply install a new radio....try 1.00.25.07 that seems to be the only quadband radio..
(you have to flash an hspl before)
It's stuck on 0% and won't continue... Tried several roms :-/
no service?????
is there a soution to this no network problem
THERE IS A CROSS IN THE RECEPTION BAR AND WHEN YOU DIAL OUT IT SAYS "OPERATION FAILED"
any replies appreciated
Quite bad if the official RUU more or less bricks the device, at least turns into just a little computer
It screwed up my Diamond aswell The gprs is completely dead, been up all night trying to fix it, several hard resets etc, nothing helps... if it was a cooked rom I could tolerate it but official roms screwing up our phones this easily pisses me off.
Mine worked again, with the old 1.93 rom!!
What the hell did they do to 2.03? I suppose the radio rom is different at least... But I couldn't change to the old radio when I had 2.03, tried using the HardSpl...
Is it possible to flash _once_ with everything from 2.03, but the 1.00.25.05 radio (which is the one from 1.93)? Doing it sequentually doesn't work.
So what I did, as the final solution:
Flash with stock 2.03 rom
HardSPL
Flash with 1.05.25 radio
Works perfect!
Hmm i did the other way round with my o2 XDA Diamond (1.93 Stock)
1. Hard SPL
2. New Radio Rom (1.09.25.23)
3. 2.03 official Ger HTC Rom (without vendor lock)
works great as well
I've seen this issue a couple of times too. With 1.93 as well as with 2.03. Did not figure out what was the cause but never had a chance to bring the device back to life with some uninstallation or radio flash. I always went back to the SPB Backup from the night before it stopped working propperly.

Categories

Resources