Hi all,
This has happened twice now. I have the TD2 in the HTC desktop cradle/stand and am usnig the HTC audio/usb splitter on the back to allow me to connect to the PC and plug the wired headphones in.
The TD2 is on and sync'd - all fine. I then get a call which I take, but once done and I have hung up the TD2 stops syncing. This time an unplug followed by plugging it back in fixed it - last time I had to soft reset.
Anyone else seen this?
R
rakh1 said:
Hi all,
This has happened twice now. I have the TD2 in the HTC desktop cradle/stand and am usnig the HTC audio/usb splitter on the back to allow me to connect to the PC and plug the wired headphones in.
The TD2 is on and sync'd - all fine. I then get a call which I take, but once done and I have hung up the TD2 stops syncing. This time an unplug followed by plugging it back in fixed it - last time I had to soft reset.
Anyone else seen this?
R
Click to expand...
Click to collapse
Try not hanging up with the hardware button, use the onscreen button or let the caller hang up and see what happens.
ok - will see if that stops it. Frustratingly it does not happen every time - only sporadically. I'm starting to wonder if the software on the TD2 is a little buggy still...??
R
Related
My backlight stays on when ever i get a text or a call. Even if i hangup, it still stays on and then i have to manually dim it. Its damn annoying, as my fone is not always with me. Ill come home and the thing would be flat due to a text early the morning and the backlight staying on the whole day.
I did a hard reset a while ago and that seems to cure it, but when i backup my data, the backlight issue is back.
I almost want to think that active sync is the culprit. dont know how or why, but it has some influence on the phone. Any Ideas?
thanx
Check your backlight (dim after X minutes) and power (turn off after Y minutes) settings?
Turn off backlight if device is not used for - 10seconds (battery power)
Turn off backlight if device is not used for - 1 minute (External power)
thats the current setttings?
Do you have your phone connected to the PC via activesync (usb or bluetooth) all day?
No, not at all. Bluetooth is off, wifi is off, its just idling. If i get a text or a call it stays on.
when i do connect to the pc its via usb
Have you installed any non standard applications that adjust the backlight???? I had the same problem when I used wm5 Ipaq programs on my TyTN.
not at all. I recently did a hard reset.
then plugged it into the pc a couple of times. So i gathered activesync connected a few times and now its giving me the same old crap
Did you install Manilla TouchFlo?
nope. there is only oem software on the fone
http://www.jongma.org/KaiserTweak/
KaiserTweak is just what you need! You can change all the 'sleep' options around, without having to dive into the registry.
tanked said:
http://www.jongma.org/KaiserTweak/
KaiserTweak is just what you need! You can change all the 'sleep' options around, without having to dive into the registry.
Click to expand...
Click to collapse
Installed it prior to asking for help.. does not do jack
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
rmorera84 said:
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
Click to expand...
Click to collapse
what did you do *before* your diamond stopped turning on?? unless you had a completely unpredicted system meltdown of your diamond for injecting it with super high voltage. it is rare for it to not power off unless you did something ... so please elaborate so we can assist better.
Ok, yesterday i use the phone like anothe normal day, in the night i turn off the phone, and in the morning, when i tried to turn on, i have this problem, for example, when a tried to do a soft, hard reset, the screen is in black, when a conect the phone to the usb the screen is black, is, i left the phone alone, in 3 minutes the black screen again, i don´t know why.
any LED activity when plugged into USB?
I think it is a major manufacture problem
I had the same problem, taking out the battery waiting a while and inserting it back, will solve the problem for some time but it will happen again.
Finally I sent it to the HTC support center.
I don't understand why HTC didn't recall.
If you'll search this forum you'll see the same problem in different stages, some times it's a blank screen but the phone will ring and some are just freeze.
Hi, I've had my Diamond for about a month soon and it started earlier this week by not wanting to come on at all. Been taking out the battery for a few days but eventually got fed up and did a hardware reset tonight. Not long after that it just suddenly turned itself off and I couldn't get it back on again. I thought I'd pack it back into the box it came in and send it back tomorrow and took out the sim card. After that it came to life again.
Happened to get a call after that and that call was suddenly disconnected without any reason.
So I am not very happy with this phone at the moment. Would appreciate any advice or if you know for sure it can't be sorted maybe I should send it back and ask for another one?
Blazeitup123 said:
any LED activity when plugged into USB?
Click to expand...
Click to collapse
Nothing, but one time the pc detect the phone, but later nothing.
No Led activity either on mine when it went dead.
When the Phone goes dead, try cooling the phone down as much as possible, and try starting it up again.....
There is a problem with the HTC Diamond in that it can cook itself (excessive heat), due to the auto over temp function crashing and not switching off the phone..... (That's what I have been told at least...)
I know over around 5 Diamonds so far that have had this issue, where the symptoms slowly get worse...
Have a look at this thread....
http://forum.xda-developers.com/showthread.php?p=2905775#post2905775
PLEASE P.M. me if you have any of the symptoms described in the thread...
I have been TRYING to get my Diamond fixed under warranty now for 2 months with little success... And I kinda need to know how wide spread this problem is to proceed any further.
could not turn on after blank screen ...
Hello,
I've had the same issue as rmorera, and after I hard reseted the phone all went o.k.. BUT after I reinstalled part of the small apps I use, the phone started to go off again. So, the problem seems to be in the software ...
I believe the cause might be the SRS WOW which I use. I installed the .cab, then the .reg file provided (ufortunatelly I don't remember from which thread I got the files ...). And shortly after, the phone stopped working. I uninstalled the software, and now it works! Could it be that the SRS WoW did this?
I tried to reinstall the SRS WoW and I found that if enabled for "Internal (Stereo)" instead of "Headphones" it gets my phone shut when the WM blanks the screen. If I select the "Headphones" options the issue seems to disappear.
Still, the SRS WoW damages the volume buttons action, but I think this issue is on another thread ...
Hi i have a few issues on my diamond. I hope you guys could help..
1st issue: lately my diamond keeps on resetting by itself.
2nd issue: later I've learned that when I record my voice using the software within the ROM, I don't hear anything but when I record my voice using my htc headset/earphones there is a sound.
What I did was:
This day I've flashed a new rom (Energy Rom) into my Diamond. It works ok then I flashed the Radio (Radio_1.13.25.24). I was able to use my diamond for a few hours.
Now..
3rd issue: My diamond is not powering on..
What i did before this happened was...
I pressed and hold the power button for about a few seconds so the ShutXP would pop up and I could soft reset my diamond.Before I clicked the soft reset button, I was checking out all the functions of it. then i clicked, a little icon,which is the Setup Timer Action. Here's the setup:
Action: Turn Off Pocket PC
In: (i don't exactly have seen the time indicated)
As curious as i am, I Clicked the Set Action button. It did shut my diamond off. Then I tried turning it on, but all it was doing was vibrate and the screen was black. At first I was hearing the start up sound a few times but later it didn't hear it anymore. I plugged in the charger but there's no white light on the circle button which used to have a light on the borders of the circle button when plugged in the usb cable. I tried pressing the power button plus the Volume down so the bootloader would appear but it did not. What shall I do?
Are you sure that the screen working because the phone vibrate and play the startup sound so if think its the screen that have som serious problem !!
HELP
I also flashed a new rom (Energy Rom) into my Diamond before.
It cannot run window mobile6.5.........how can I do???
I cannot connect to PC .......
I recently also had a similiar problem, after attempting a flash of the Rom, the ROM update stopped halfway through and reported that it had lost connection to the device....
The whole phone would not vibrate/power on, nothing - no glowing ring around the middle button to indicate it charging at all.
I had to return to the repair centre and somehow they didn't notice that I had modified the firmware and replaced the whole phone for free citing a hardware issue ...
Doesnt sound good if you cannot hard reset the device
Really need help guys. My SGS is doing REALLY funny things...
I just got my SGS a few days ago and so far all I've been doing is installing aps on it (no messing with rooting/flashing).
Today, I was trying to get Keis to work. I reinstalled Keis and unplugged and repluggeed my phone a few times and managed to get it to recognise.
Here's the problem, now it ALWAYS says USB connected on the top left hand corner. Everything seems ok except after a few minutes of the screen turning off, I can't turn it back on again. Absolutely no activity. If I try to turn it back on immediately after it goes off, it can come back on again.
Things get weirder. If I remove my battery or turn it off, I can't turn it back on again (it flashes a loading symbol in the middle of the screen for half a second then nothing happens). To turn it back on, I have to plug it in and wait for the charging screen to come on. THEN it comes on.
I've tried doing a factory reset but nothing changed... Is there a hardware fault? Perhaps flashing will solve the problem?
ps. When it's off, I can enter download mode but not recovery more unless I plug it in...
Sounds like a hardware problem on phone, But I beleive its more of a Grounding problem with your usb. Can you try it with another port or computer? Also does your pc/laptop have a grounding pin for its power supply? I noticed I get odd power spikes when I travel to asia as their power is not always good. You can always buy a surge protector for your computer and one for your samsung charger. Other then that see if you can get new KIEs (I Don't EVER use it as its crap and never reconizes my phone)
Also if you want to kick up a storm, get the thing replaced as it sounds like a phone hardware problem as it should not crash when you take battery out. Could be battery but better to change the whole thing.
Try activating USB DEBUG in settings. Check the option and restart.
It should solve the problem. You can UNCHECK again the option and the phone should work also without USB debug activated
It will happen again, it seem to me a problem with some USB port, or some cables, activating a *waiting for USB* option BEFORE the ROM loading
Thanks
Thanks for the advice guys. Last night it suddenly started behaving itself after the 10th or so hard reset *phew*
Very strange problem and I think I will stay well clear of Kies from now on... Samsung make a good phone but lousy software...
josephlck said:
Thanks for the advice guys. Last night it suddenly started behaving itself after the 10th or so hard reset *phew*
Very strange problem and I think I will stay well clear of Kies from now on... Samsung make a good phone but lousy software...
Click to expand...
Click to collapse
I have a desire but the samsung daily briefing app, the media player, .... and my desire has some HW problems too
Hello,
I encounter now a strange issue :
When my Galaxy S is connected with USB cable, it is not possible anymore to use the screen. If I try to touch it, it acts like if I was moving several fingers everywhere, so keyboard is not usable at all, the notification bar comes down at any time, dragging is not possible, clicking is a nightmare.
I unplug the usb and all is ok...
It occur only on my laptop (sony vaio VGN-TZ31WN) when the laptop is plugged on. On battery all is fine. On another laptop, all is fine.
Did you ever encountered such issue and solution ?
I guess this is linked to the laptop charger but I would like to avoid having to spend 80 euros for a new one :-(
I got the same thing when fiddling with ICS yesterday. After a reboot it was ok though.
I have an AC-USB adapter that will disable any soft key, only HW keys will work.