I have this many roms what i test in this message black screen and "Tapslidelide" if i can open lock in my phone then screen appear "next unsuccesfully login ..." or someting and then if i take power off or click OK the phone reset and format my SD card, GREAT!! This is VERY IMPORTANT, (i use Exchange mail), picture is HTC TYTN II but same message is Xperia.
This appears to be just some internal login protection software that happened to be built into your ROM. The 6.5 timebomb doesn't wipe your SD card.
Leddy said:
This appears to be just some internal login protection software that happened to be built into your ROM. The 6.5 timebomb doesn't wipe your SD card.
Click to expand...
Click to collapse
OK but this problem is only in 6.5 rom ?
most cooks shouldn't even have this in their roms as most of the sources have the TB removed.
Can't really see MS formatting anyones SD cards can you?
the reason it's in the 6.5 roms (from MS builds at least) is that they are all demo or test versions. Same as WIN7 RC will stop working properly in March 2010
fards said:
most cooks shouldn't even have this in their roms as most of the sources have the TB removed.
Can't really see MS formatting anyones SD cards can you?
the reason it's in the 6.5 roms (from MS builds at least) is that they are all demo or test versions. Same as WIN7 RC will stop working properly in March 2010
Click to expand...
Click to collapse
You bet by March 2010 I'll be flashing Windows Mobile 9
gtrab said:
You bet by March 2010 I'll be flashing Windows Mobile 9
Click to expand...
Click to collapse
haha actually I think he was talking about Windows 7
Related
I successfully upgraded from WM2003 to WM2005 some months ago. I'd now like to upgrade again to TuMa 1.3. Currently my existing rom is 5.03.02 and it crashes quite regularly - especially if people call me.
Anyway, I've been reading through the wiki and a lot of the threads again but there's one thing I can't seem to understand. It seems as if upgrading requires an SD card? Is this the case?
Now, before I'm accused of not reading the documentation, I have and it quite clearly states, "copy the EXTROM folder to your storage card". That's fine and well but I've never had an SD card so how did I manage the first upgrade?
What I've been trying to find out (with little success) is if "storage card" is like the ROM storage area but before I flash my SPV M2000 into a very expensive paperweight I thought I'd better check. Better safe than sorry I guess.
Can someone confirm?
no sd card
i've got a spv m2000 and no sd card but i've managed to upgrade to tuma 1.3 no problem i just copied the extrom to the storage on the phone got less storage now but still works fine
Re: no sd card
jonni1980 said:
i've got a spv m2000 and no sd card but i've managed to upgrade to tuma 1.3 no problem i just copied the extrom to the storage on the phone got less storage now but still works fine
Click to expand...
Click to collapse
Do you remember where you copied it to? Was it the root directory or just in My Documents?
My worry is I'll copy it somewhere that the install program won't be looking. In the documentation it explicitly states "storage card/EXTROM". It'd be just my luck to copy to the files to the root of my device - try to flash it and having it fail because it couldn't find the image files.
You seriously don't have an SD Card?!
Go to a store, buy a 128 MB one for nearly nothing. Honestly, I can't imagine running a Windows Mobile device without one, especially Windows Mobile 5. There just isn't enough space natively in the device.
You don't technically NEED anything in the EXTROM folder either. Alternatively, you can just take all of its contents (cab files) and put them on your device using activesync, and run them in File Explorer to install them. It's the same thing, just not automatic.
TheLastOne said:
You seriously don't have an SD Card?!
Go to a store, buy a 128 MB one for nearly nothing. Honestly, I can't imagine running a Windows Mobile device without one, especially Windows Mobile 5. There just isn't enough space natively in the device.
You don't technically NEED anything in the EXTROM folder either. Alternatively, you can just take all of its contents (cab files) and put them on your device using activesync, and run them in File Explorer to install them. It's the same thing, just not automatic.
Click to expand...
Click to collapse
I've not had the need to use much memory on the phone really.
When I had an iPAQ I needed loads of memory and was always using it everywhere but I've found the SPV to be very slow (hopefully improved with the new ROM) and also the headphone socket is proprietary so I can't use headphones that fit my ears that don't fall out.
As well as this, I no longer use Windows - well I use my gf's laptop to flash the phone but that's about it. There's very little integration with Unix and the SPV and it's led to a dramatic reduction of usage.
I've heard of some programs that can sync with Evolution on Unix but they're very unstable at the moment and require quite some understanding to get working and I don't have the time to get that working just yet - maybe in a few weeks time.
I've already ordered an SD card but was just a little excited about the prospect of flashing the ROM (it's like Christmas morning for me!) and was wondering if I could do it without it.
Anyway, running the cabs one by one sounds like a solution for the time being. I thought it needed to replace parts of the sub-system that needed a hard reset no?
Once the ROM is flashed, will Device Information reflect the ROM Version as WM5 5.1.1700?
There is no problem to flash this rom without SD card, because you can install manually every cab from extrom after flashing
xplode said:
There is no problem to flash this rom without SD card, because you can install manually every cab from extrom after flashing
Click to expand...
Click to collapse
Thanks xplode.
I've worked out that the cabs are completely independent of the ROM update and as such don't even need to be on the device.
I thought they were like install files and needed to be present after reboot for the flashing to complete properly. My mistake.
With wm6 i'have no more usb mass-storage funcionality!!
I've two programs and they says:
1) WM5torage: "Can't open the selected card/disk device"
2) Card Export: "Can't .... missing dlls or corrupted registry entries"
What can i do?
Anyone with this problem?
thanks!!!
wm5torage works for me. there may be some application (process) running from (or use) you're storage card.
NoOne who can help me?!?
Thanks!
I can't use WM5torage too,I think that is the software's problem.
I use ver. 1.6 and it works for me. try to use a newer ver. or a older one from yours.
WM5torage also works fine for me w\ crossbow.
running 1.73 without problems
JouSePo said:
running 1.76 without problems
Click to expand...
Click to collapse
Where's 1.76 version?
Can you upload here?
Many thanks!!
electrobose said:
Where's 1.76 version?
Can you upload here?
Many thanks!!
Click to expand...
Click to collapse
sorry 1.73
also i'm with 1.73 and pdaviet wm6 v2 but can't wotk, even card export....
i don't know what's th problem!!!
electrobose said:
also i'm with 1.73 and pdaviet wm6 v2 but can't wotk, even card export....
i don't know what's th problem!!!
Click to expand...
Click to collapse
I also 've the same problem>>>
i use the 2 programe but does't work to me
what i've to do>>?
Disable Programs Running on SD Card
I have to disable all of my today screen programs. They are installed on my SD card and WM5Storage won't run if they are enabled.
had you tried hard reseting already?
First start Wm5torage and switch to mass storage, then connect the USB!
When active sync is allready connected, i was not able to use Mass Storage and
Can anyone with an OPAL device please tell me if the Softick Card Export application http://www.softick.com/pocket-pc/cardexport2/ actually works on this device. When tried with a 16Gb card in my Kaiser - using the amazing Hyperdragon ROMs - it locks up the device completely. I'm wondering if the issue is generic to OPAL deice too...
Thx
why don't us wm5torage? it's free
guap said:
why don't us wm5torage? it's free
Click to expand...
Click to collapse
Because it doesn't work.. I tried it across 3 separate ROM iamges, on Wm6 and 6.2 on the Kaiser and it just did nothing useful at all except lock up my machine. I now have 16Gb card - and I dread to think what it will do to that.
G.
It seems to me that there must be a file "usb2pc.exe" in Windows folder, so you can try it
Hi!
First, sorry my poor english.
Im flashed the new AthineOS 3.2, and cant do the Card Export2 or WM5torage to work.
The message of new hardware appears on windows, shows "Mass Storage Media Device", but dont appear on Windows Explorer.
When i disconnect the cable, windows explorer show one removable device for 2 seconds more or less, but this device does not contain the name of my card.
What is happening? My card works well when i put in a usb memory reader.
Thanks a lot for the help!!
Paulo Alexandre
It's known WM5torage is dodgy, but CardExport should work. You should search that ROM's thread for other reports of this problem and/or post there as it's most likely related to the ROM.
Thanks man.
Will search on a AthineOS 3.2 Thread.
I have this problem only after the flashing... before the Athine i used one Dutty 6.0 Rom, and i liked.
have a Dutty WM 6.1 Rom?
Thanks!!!
I am a serial flasher(!). Up until yesterday my latest ROM was dutty 3.3. All was working fine.
I flashed 3.4 (running BLAC_USPL.EXE) the storage card way, putting the storage card in once I was in bootloader mode etc. ROM loaded fine, but ever since then, manilla wont recognizre my photos, and is giving me a hard time on music.
In addition, without the storage card inserted, device runs MUCH faster than when it is inserted. i thought it was a problem with the 16Gig card, so I reformatted it and reloaded my data (which I can see on file explorer). SAME problem: Manilla wont load pictures and device slow.
I tried 3 other ROMS, including going back to Dutty 3.3. SAME problem: Manilla wont load pictures and device slow
I tried another storage card, this time a 6gb wich has always been flawless. formatted once on the device. formatted anpther time on a PC. SAME problem: Manilla wont load pictures and device slow.
Im going crazy. Can anyone offer some advice?
i don't know if the File System can make any differance, but try multiple types, format it once in FAT32 and test, then NTFS and Test.
maybe one of them is slow!
let us know how it goes
cheers
OK will try. thing is that the machine just gets slower and slower, as if some major process is running in the background. Ideas?
..and its a problem that never occured in the past.
I know it's a long shot but has any "crud" built up in the microsd card slot. If you've eliminated the sd card it's self and everything is fine without the card sound sounds like it's the slot it's self.
had same problem, reformating complately SD card helped me, try formating it again dont use quick format option.
hope that's gonna help you.
cheers
i figured it may possibly be a corrupt file in my DCIM (pictures) folder which stopped manilla reading the folder and kept it busy scanning the folder (hence machine slowwwwwwwwwwwdown), so renamed it, and the problem has gone. Odd, as I can read all the pictures on my PC.
thnaks for all comments
Did i miss somting, you say this is due to a 1.59 rom, only one i know of is CHT and based on your contry I don't see a match, do you have a 1.59 WWE rom
ekerbuddyeker said:
I am a serial flasher(!).
Click to expand...
Click to collapse
There's your problem - use USB to flash.
Seven_PRX said:
There's your problem - use USB to flash.
Click to expand...
Click to collapse
as opposed to the SD method? It may be that entering the card during the process (as outlined by Dutty et al) can cause other files to get corrupted...?
try hard reset after rom flashing.
ekerbuddyeker said:
I am a serial flasher(!). Up until yesterday my latest ROM was dutty 3.3. All was working fine.
I flashed 3.4 (running BLAC_USPL.EXE) the storage card way, putting the storage card in once I was in bootloader mode etc. ROM loaded fine, but ever since then, manilla wont recognizre my photos, and is giving me a hard time on music.
In addition, without the storage card inserted, device runs MUCH faster than when it is inserted. i thought it was a problem with the 16Gig card, so I reformatted it and reloaded my data (which I can see on file explorer). SAME problem: Manilla wont load pictures and device slow.
I tried 3 other ROMS, including going back to Dutty 3.3. SAME problem: Manilla wont load pictures and device slow
I tried another storage card, this time a 6gb wich has always been flawless. formatted once on the device. formatted anpther time on a PC. SAME problem: Manilla wont load pictures and device slow.
Im going crazy. Can anyone offer some advice?
Click to expand...
Click to collapse
there´s already a thread discussing this issue with a vanishing sd-card after flashing the new roms. Take a look here:
http://forum.xda-developers.com/showthread.php?t=506560&page=1