Related
Talk about Pocket PC becoming more powerful
This was made possible by a Pocket PC port of Bochs, by Mamaich, who has also ported DosBox, a "program similar to Bochs but it's a lot faster and only emulates DOS". Sadly, the author tried and failed to get WarLords II working on both these versions, but I'm sure time will tell!
If you're keen to try this on your own Pocket PC, you'll need a minimum of a 256MB memory card (or stream the image over a wireless network) and you'll need a program like Nyditot Virtual Display to increase your screen resolution. Oh, yes, and you'll also need the emulator.
According to Miracle, what we really need now is for another developer to "pick this up and optimize it to get more speed, since Mamaich stated that he will not continue to work on this, but instead focus more on DosBox."
Given that this shows that a Pocket PC is easily powerful enough to run Windows 95 and 98 in an emulator, do you think that attention might shift from developing new Pocket PC games to trying to get the original PC games to work in emulators? While I played a few games in Pocket DOS, the lack of decent controls made enjoying them nearly impossible. On the other hand, a predominantly mouse based game might run quite happily, and allow everyone to enjoy it on the move.
---------------------
Instructions:
WIN95 on Pocket PC with BOCHS 2.1.1 in 30 STEPS
WIN95 and BOCHS on Windows
BOCHS Emulator Homepage
Another Informative Article about PPC/BOCHS and Emulation
Please note: I have not tried this myself. However i believe this to be true and working, since ppc are powerful these days. In saying so, i do not believe this emulator will run on my h6365...you probably need a descent processor speed, probably a minimum of something around 400mhz (i'm guessing)
This opens up a big portal to the ppc world, if win95 can be stable on ppc, all win95 programs can run within ppc...
I do not take any responsibility for damage to your ppc resulting from this post!
Procedure is complicated, you will need to have some knowledge of PPC to do it.
Please if anyone has manage to get it working tell us here! Any problems please post
Bochs for ppc emulator is attached at the bottom!
There are no Links!!!
????
Dosbox...
Don't work under Windows Mobile 2005 version.
And may you install windows 98 or ( Someone had that tried )
But you will got:
Slow performance.
Hardware errors
No sound ( With some devices )
Video problem
more more.
This is an emulated and remaked Windows version, ( and only a rumour )
Becareful.
Thx.
EQUANCY said:
Don't work under Windows Mobile 2005 version.
And may you install windows 98 or ( Someone had that tried )
But you will got:
Slow performance.
Hardware errors
No sound ( With some devices )
Video problem
more more.
This is an emulated and remaked Windows version, ( and only a rumour )
Becareful.
Thx.
Click to expand...
Click to collapse
That's Right
I have done this a long while ago back when I had an Asus A620. I got Win95 to boot in 4-5 minutes. No keyboard, no mouse, but it was interesting.
Really interesting, but only for Win98 retrò experience on my pda, not for other, this os (win98 or 95) is really unstable compared to today microsoft products...it is possible to run win nt or 2000 with same system or ntfs make trouble? just a little workstation, on the xda XD
Dos emulations doesn't support nt platforms.
DosBox a simple Msdos emulation system, like Virtual PC,
the emulation projects maded for simple operations with some hardware restrictions.
such as soundless or low graphics.
The FreeSCI project is one of them. That's amiga emulation platform, now it has been resembled for Windows Mobile based Pocket PC's,
but some games are running slow, someones don't work, soms goes error.
There is no stabilitation.
I suggest, don't try hardluck...
You may lose ur pda,
windows98 maybe run, but WindowsNT never can be.
PDA's are not as notebook and not much flexible.
If you have 800 mhz or higher mobile processor and 128 or 256 mb ddr ram. May you can try to (The pda's will use ddr technology nearly) play some basic windows games.
May be solitaire...
A good dream...
But we don't use miracle devices,
They're only PDA's...
And they have already OS's and games....
Am I wrong?
"DosBox will emulate Windows Vista in future..."
I wish that,
But that will never happen, like windows98 or NT.. (in short times, before 2080 )
THX.
EQUANCY said:
Am I wrong?
"DosBox will emulate Windows Vista in future..."
I wish that,
But that will never happen, like windows98 or NT.. (in short times, before 2080 )
THX.
Click to expand...
Click to collapse
lol.not you are not wrong.i think maybe in the future....vista and his rootkits will run on my old C64
Hi folks, We all know about new feature "Windows Experience or Performance Index" in Windows Vista. It's a new feature which automatically calculates your system performance index based on the hardware you have. It can be between 0.1 to 9.9
Windows Performance Index is shown in System Properties which can be accessed by right-clicking on My Computer icon on Desktop and select Properties or from Control Panel.
With Vista's Windows Experience Index it can be handy to manually change the score so you can get extra features that apply to PC's with a higher score.
Using this trick, you can increase that Index upto 9.9
NOTE: It will, of course not affect/improve the actual performance of your system. Take a prior backup of that file before editing it.
How to:
1. Type following in Startmenu Searchbox / Run / Explorer Addressbar:
%windir%\Performance\WinSAT\DataStore
And Press <Enter>.
2. You’ll one or more .xml files in the folder. Sort them by Date Created or look at their name. The file name will be in following format:
2007-11-08 22.23.17.858 Assessment (Initial).WinSAT.xml
Where "2007-11-08 22.23.17.858" might differ from machine to machine and Windows Installation date/time.
3. Open the latest file in "Wordpad" and goto line having <WinSPR>. It’ll be approx. 12th line and will look like following:
<WinSPR>
<SystemScore>1</SystemScore>
<MemoryScore>4</MemoryScore>
<CpuScore>3.4</CpuScore>
<CPUSubAggScore>2.9</CPUSubAggScore>
<VideoEncodeScore>3.9</VideoEncodeScore>
<GraphicsScore>1</GraphicsScore>
<GamingScore>1</GamingScore>
<DiskScore>4.2</DiskScore>
4. Now you can edit the numbers between > & < and can increase them upto 9.9 as following:
<WinSPR>
<SystemScore>9.9</SystemScore>
<MemoryScore>9.9</MemoryScore>
<CpuScore>9.9</CpuScore>
<CPUSubAggScore>9.9</CPUSubAggScore>
<VideoEncodeScore>9.9</VideoEncodeScore>
<GraphicsScore>9.9</GraphicsScore>
<GamingScore>9.9</GamingScore>
<DiskScore>9.9</DiskScore>
5. Thats it. Save the file and check the Index again in System Properties. It'll 9.9 now.
Microsoft will allow a higher score than 5.9 in the future when the relative performance of future computers far exceed a score of 5.9
i have a question for u Rohit.
my pc has intel 915gm which has 192 mb graphic memory
1gb ram
1.7 GHz intel centrino
as intel has stopped shipping this chipset,there are no WDDM drivers available for it.
so no aeroglass for it!
as the beta versions of vista used to have a perfectly working aeroglass., is there any way i can force glass effect by any tweak?
(and what more, Microsoft no more gives the vista beta for download)
thanks
mariner_heart said:
i have a question for u Rohit.
my pc has intel 915gm which has 192 mb graphic memory
1gb ram
1.7 GHz intel centrino
as intel has stopped shipping this chipset,there are no WDDM drivers available for it.
so no aeroglass for it!
as the beta versions of vista used to have a perfectly working aeroglass., is there any way i can force glass effect by any tweak?
(and what more, Microsoft no more gives the vista beta for download)
thanks
Click to expand...
Click to collapse
hey dude you should be able to pull the driver out of one of the beta builds. and that should work fine.
mariner_heart said:
i have a question for u Rohit.
my pc has intel 915gm which has 192 mb graphic memory
1gb ram
1.7 GHz intel centrino
as intel has stopped shipping this chipset,there are no WDDM drivers available for it.
so no aeroglass for it!
as the beta versions of vista used to have a perfectly working aeroglass., is there any way i can force glass effect by any tweak?
(and what more, Microsoft no more gives the vista beta for download)
thanks
Click to expand...
Click to collapse
Hey mate, try this:
1. Click on the start button and key in regedit and hit Enter.
2. Navigate through, HKEY_CURRENT_USER, Software, Microsoft, Windows and DWM.
3. Set Composition to 1 and CompositionPolicy to 2.
4. Restart the DWM by restarting the Desktop Windows Manager Session Manager service. This can be done in services.msc or by typing net stop uxsms and net start uxsms at command prompt.
Once the service restarts you will have glass !!!
by beta, you mean Longhorn ? I don't think Microsoft is nice enough to offer us free beta version, when their Vista(paid version) is already on a boom in market
zacwhite15 said:
hey dude you should be able to pull the driver out of one of the beta builds. and that should work fine.
Click to expand...
Click to collapse
Yeah mate, you are right, this can work.
rohitsharman said:
Hey mate, try this:
1. Click on the start button and key in regedit and hit Enter.
2. Navigate through, HKEY_CURRENT_USER, Software, Microsoft, Windows and DWM.
3. Set Composition to 1 and CompositionPolicy to 2.
4. Restart the DWM by restarting the Desktop Windows Manager Session Manager service. This can be done in services.msc or by typing net stop uxsms and net start uxsms at command prompt.
Once the service restarts you will have glass !!!
by beta, you mean Longhorn ? I don't think Microsoft is nice enough to offer us free beta version, when their Vista(paid version) is already on a boom in market
Click to expand...
Click to collapse
tried it also.
no luck mate!
i feel we can't do it.
i appreciate ur willingness to help friends.
You are always welcome, buddy. Did you try zacwhite15's way ?
rohitsharman said:
You are always welcome, buddy. Did you try zacwhite15's way ?
Click to expand...
Click to collapse
not really because:-
1. i no longer have vista beta.
2. even if i had, i'm too dumb to do that.
So, in the nutshell, you need those WDDM drivers, right ?
yes exactly....but they r not available from intel.
http://www.petitiononline.com/intel915/petition.html
IVE MADE USB GAMEPADS WORK ON OUR PHONE!!!!! now you can play your nintendo, super nintendo, genesis and playstation emulators on your T.V. and have a matching remote to boot.
You will need the following:
Registry Editor
Hidgamep.dll file (included)
4 in1 cable (and usb gamepad ) any with 1 joypad will work.
1. you will need to unzip the hidgamep.dll file into your windows directory on your phone.
2. open your registry editor, and find the directory [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default
3. add the value "1_5". ( dont put the "")
4. open the value 1_5 and add the value "gamepad" ( dont put the "")
5. now add the key "hidgamep.dll" ( dont put the "") (this step makes windows use the driver)
6. save your work remove the usb device and reboot your phone.
7. now if you did this right, when you plug in your usb game pad it should give you a message. now all you have to do is set the buttons on your emulator and your off to gaming like a pro!!!!
Questions? email me
If you have any questions please email me at: [email protected]
if you want any other help also email me.
Where do you get a usb game pad? Kind of lost here. Seems interesting though.
it would be nice if you can port USB MassStorage Driver into Athena~
rickyrvl said:
it would be nice if you can port USB MassStorage Driver into Athena~
Click to expand...
Click to collapse
it already has this ??? but there is a size limit
where can u find the playstation emulator
Very interesting! Great work!
Does a normal USB-keyboard work with this?
(And is there a way to use localized keyboards with the Athena?)
Think I shall give this another try
I found the .dll on another forum a while ago but could not get it to work but might of been a very very ancient copy but I think I shall give this a try again, a couple of quick questions do you know how many buttons the .dll supports? And also does it map the pad to the standard joystick layout for games that do not allow you to reconfigure the keys?
If all goes well might consider getting one of these http://www.geniusnet.com/geniusOnli...50&_pageLabel=productPage&test=portlet-action
cuba3377 said:
IVE MADE USB GAMEPADS WORK ON OUR PHONE!!!!! now you can play your nintendo, super nintendo, genesis and playstation emulators on your T.V. and have a matching remote to boot.
Click to expand...
Click to collapse
Do you know if this work on other WM devices too? I might try it next week if you are not sure.
My guess is "no" since it requires a USB host which only Advantage has...
update
this driver supports 2 axis controller and up to 8 buttons.
kareem9nba said:
Where do you get a usb game pad? Kind of lost here. Seems interesting though.
Click to expand...
Click to collapse
you can get a universal usb gamepad anywhere. i got mine at superwalmart 9 bucks
rickyrvl said:
it would be nice if you can port USB MassStorage Driver into Athena~
Click to expand...
Click to collapse
the driver for a mass storage device is already installed. i looked into it. the thing is that the battery on a phone is about 3.7v. a regular usb port has alot more than that. dont expect to power a hard drive with such low current. the drivers are installed so if you use thumb drives or multi usb port drives it will work.
irus said:
where can u find the playstation emulator
Click to expand...
Click to collapse
search google for ps emulator windows mobile fpsece
Moskus said:
Very interesting! Great work!
Does a normal USB-keyboard work with this?
(And is there a way to use localized keyboards with the Athena?)
Click to expand...
Click to collapse
the driver is already preinstalled with windows mobile 6. aslong as the current draw of the keyboard isnt more than 3.7 v
Oberth said:
I found the .dll on another forum a while ago but could not get it to work but might of been a very very ancient copy but I think I shall give this a try again, a couple of quick questions do you know how many buttons the .dll supports? And also does it map the pad to the standard joystick layout for games that do not allow you to reconfigure the keys?
the reason it didnt work is because the buttons need to be maped correctly. all my driver does is tell the pda what we want it to do when you press buttons. the axis is the directional keys on the board.
if you did want to reconfigure the map. its just plug n play with the driver, just remove the current mapping and add the keys you want to the driver. also u will know when u did it right because you will get a pop up box
Click to expand...
Click to collapse
It works
Hi Cuba337,
Got it sussed and now it works with a couple of joypads might get the one I linked above now. For anyone else trying this and getting stuck I found you need to tweak the intructions given.
Step 3, Add a new KEY named "1_5" (ignore the " ")
Step 4, Add a new KEY named "gamepad"
Step 5, Add a new STRING value called "DLL"
Step 5a, edit the value and enter "hidgamep.dll"
And that does the trick for me did not bother reseting the phone just plugged a pad in and it worked. It works with both my genuine HTC 4-in-1 cable and my no name 7500 dock with 2 usb ports on the side. It does feel a touch unresponsive but the only digital gamepad I have laying around is rather shoddy and my other spare pad has analogue pads which it's not keen on either so will get new pad and see what happens, will also see if the new PK4.0 rom helps when that comes out.
Thanks Cuba337
cuba3377 said:
IVE MADE USB GAMEPADS WORK ON OUR PHONE!!!!! now you can play your nintendo, super nintendo, genesis and playstation emulators on your T.V. and have a matching remote to boot.
You will need the following:
Registry Editor
Hidgamep.dll file (included)
4 in1 cable (and usb gamepad ) any with 1 joypad will work.
1. you will need to unzip the hidgamep.dll file into your windows directory on your phone.
2. open your registry editor, and find the directory [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default
3. add the value "1_5". ( dont put the "")
4. open the value 1_5 and add the value "gamepad" ( dont put the "")
5. now add the key "hidgamep.dll" ( dont put the "") (this step makes windows use the driver)
6. save your work remove the usb device and reboot your phone.
7. now if you did this right, when you plug in your usb game pad it should give you a message. now all you have to do is set the buttons on your emulator and your off to gaming like a pro!!!!
Click to expand...
Click to collapse
nice job... just one question does it work with any game pad?
Awesome job
Thanks for the .dll posting and the notice to get things working for the gamer in all of us
Can you post links to the set of utilities that you are using? A consolidated list of game emulators and versions that support the config that you are using and talking about?
I have all of the older emulators, but I have had trouble getting many of them to work in REALVGA mode. Do you have yours working in VGA mode? Since you have a working solution it would be really really cool to get all of the links from you for the solution that you have put together. I would personnally be grateful for the time saved from testing unknown configurations...
Thanks,
Bob
Auto Config File For The Dll
Instead of asking for it I am deciding to post it. LOL
Create a .REG file and place this into it's content.
Code:
[HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default\1_5\gamepad
"DLL"="hidgamep.dll"
Place the file on your device and run it. I don't know if the run method works as it should on
a windows pc but it should in theory. After a successful merge of the file you may delete it.
Personally I would place it in the DLL's zip file so it does not get lost for future installations.
If there is a CE Hacker out there looking for an example to follow you might want to
consider the following information taken from windowsfordevices.com
DB files define the default RAM-based property database for the object store. The
syntax is a bit cryptic, but it is documented. For Platform Builder-generated systems,
it is rare to need to use the database at all, except to set up the automatic
connection for ActiveSync, as follows:
Code:
; This is the database initialization file.
; format is as follows -
; Database : db name : type in hex : num sort order : hex propid : hex flags ....
; CEDB_SORT_DESCENDING 0x00000001
; CEDB_SORT_CASEINSENSITIVE 0x00000002
; CEDB_SORT_UNKNOWNFIRST 0x00000004
; CEDB_SORT_GENERICORDER 0x00000008
; A database specifier can be followed by any number of record specifiers
; Record :
; A record specifier can be followed by any number of field specifiers
; Field : hex propid : value [ either string or hex dword ]
; End (ends a matching database or a record context)
Database: "DB_notify_events" : 0 : 1 : 0001001F : 0
; 0001001F - PROPIDR_NAME
; 0002001F - PROPIDR_CMDLINE
; 00030013 - PROPIDR_EVENT
Record :
Field : 0001001F : "repllog.exe"
Field : 0002001F : "AppRunAtRs232Detect"
Field : 00030013 : 9
End
End Database
This DB file will set up the notification database to run REPLLOG whenever an RS232
event is triggered. This will start the connection process on the default "hot plug"
port for ActiveSync.
Maybe you can map an 8-way d-pad with buttons to the keyboard with this method and speed up the response time without using C/C#/C++? I Dunno. I Never heard of
using a DB file as a driver until I read up on the REG files.
For those who don't know but are interested RS232 is Infrared. I'm sure the codes
above could be changed to a USB or even Bluetooth COM Port.
Somebody Push this thread to my favorite COOKS!
Just downloaded Call of Duty 2 PPC, installed it to the memory card and can confirm it runs close to perfect.
You will need to start the game with the keyboard open and once started enter into the configuration and flip the screen so you play with keyboard.
You need to remap the keyboard direction key and I found increasing the screen sensitivity a little helps too.
There are a few minor issues though:
1. Sound is a touch wavy
2. Now and again you get the picture taking a 1 second pause in but not that annoying.
I should think disabling TouchFLO would stop these happening.
3. Some of the other keys don't map correctly, but I think this can be corrected if we play around with the config files
You can get Call of Duty 2 PPC from here.
Enjoy
Does it run in hardware accelerated mode with the Diamond hack?
http://forum.xda-developers.com/showthread.php?t=428703
All I've done is download the COD2Setup.exe installed to the memory card and ran it.
Just uploading a video to youtube now
Not sure how to confirm if its running from the hardware drivers.
The next thing I was going to do was load GLBenchmark, but again never used it before.
Once the video is uploaded play it and you'll see a reddish header above the "Mission 1" description just after the screen where I select the game level "Easy"
Now looking at the quality of it and comparing it with Duke Nukem and Quake 2 on my old Kaiser I would be sure it is using the hardware drivers.
If you've got any tips on how I can check let me know
mike freegan said:
Does it run in hardware accelerated mode with the Diamond hack?
http://forum.xda-developers.com/showthread.php?t=428703
Click to expand...
Click to collapse
it has to run.. i posted the quake 3 accelerated version for the diamond also in this forum to see if you guys can get it to run on the raphael, most probably yes, it will work much the same as the diamond.
so you just have to follow the original cod2 thread in the diamond forums to get cod2 fully accelerated on the raphael hehe
Video uploaded
Call of Duty 2 PPC on HTC Touch Pro ( Raphael )
GLBenchmark to follow
The games should run smoother on the Raphael because it has about 100 extras megabytes of ram Btw, I´m a happy owner of the Raphael.
OP-> Did you just install it and then it worked? No tweaking with deleting dll files and so on like the diamond users?
Mr.Sir said:
The games should run smoother on the Raphael because it has about 100 extras megabytes of ram Btw, I´m a happy owner of the Raphael.
OP-> Did you just install it and then it worked? No tweaking with deleting dll files and so on like the diamond users?
Click to expand...
Click to collapse
Yes - Bought - Downloaded COD2Setup.exe - Installed the COD2Setup.exe via WM Device Centre to my memory card - ran the program - changed the configs per post#1
No changes - No deleting - No additional files
I do need to confirm 100% that its using the hardware drivers though.
I ran GLBenchmark but it just ran the test program but not with COD2 running I'm not sure how to get a reading of the COD2 performace/FPS
yeah, it runs. mine still looks as dodgy as on my atom exec. doesnt seem to be any visual improvements :s
HArdware accelerated runs pretty well
http://forum.xda-developers.com/showthread.php?t=428703
I think it uses software acceleration in the video because it is really laggy compared to the video of the diamond from the original thread...
I am having trouble correctly remapping the keys, can someone help.
I want to use the W S A D keys instead of the arrows. btw I have AEB plus installed
Brendo said:
yeah, it runs. mine still looks as dodgy as on my atom exec. doesnt seem to be any visual improvements :s
Click to expand...
Click to collapse
[rant]
maybe you need glasses.
[/rant]
seriously, most probably you're running the software version. it's pretty much noticeable, even by a total n00b
Brendo said:
http://forum.xda-developers.com/showthread.php?t=428703
Click to expand...
Click to collapse
Had a snoop around
cod2_goforce.exe - is present in the COD2 game directory
libGLES_CM.dll - is present in the Windows directory
cod2_gles - not present
lebgles_cm.dll - not present
Found this on another site trying to install COD2 to a Diamond
For Hardware 3D render:
For Intel rename COD2_G~1.001 to cod2_gles.exe
For Geforce rename COD2_G~1.003 cod2_goforce.exe
rename LIBGLE~1.004 libGLES_CM.dll
I'm sure lebgles_cm.dll was present before, as I looked for it when I was reading hamdir Diamond thread.
1. Does anyone else still have lebgles_cm.dll after installing COD2 but not applying the Diamond hack?
2. Does anyone know how to confirm 100% it is running in hardware mode?
3. Any programs out there that show the FPS COD2 is running at?
iRiKi said:
[rant]
maybe you need glasses.
[/rant]
seriously, most probably you're running the software version. it's pretty much noticeable, even by a total n00b
Click to expand...
Click to collapse
hehe, yeah. i had the software version, but once updating to hardware version, i see massive improvement
and all i had to do was copy the cod2_goforce.exe file over
jasthom69 said:
Yes - Bought - Downloaded COD2Setup.exe - Installed the COD2Setup.exe via WM Device Centre to my memory card - ran the program - changed the configs per post#1
No changes - No deleting - No additional files
I do need to confirm 100% that its using the hardware drivers though.
I ran GLBenchmark but it just ran the test program but not with COD2 running I'm not sure how to get a reading of the COD2 performace/FPS
Click to expand...
Click to collapse
I think yours is running software mode because it laggs really much compared to the official diamond cod 2 thread.
Mr.Sir said:
I think yours is running software mode because it laggs really much compared to the official diamond cod 2 thread.
Click to expand...
Click to collapse
Yeah your all right the first post/video was using software rendering.
cod2_goforce.exe was present on the TP internal memory:- root/Program Files/COD2
Because I had installed the COD2 to my storage card the cod2_goforce.exe needed to be copied over to:- Storage Card/Program Files/COD2
Watch both in high quality on you tube and compare Call of Duty 2 PPC on HTC Touch Pro ( Raphael ) using hardware drivers with Call of Duty 2 PPC on HTC Touch Pro ( Raphael ) using software drivers
Although the new video doesn't really do it justice as it looks a bit grainy you can see the differance clearest on his arm and gun. It looks great on the TP though.
Since the video I have also pointed the COD2.Ink shortcut to cod2_goforce.exe.
Thanks everyone for the tips
buttons
I'm having trouble mapping buttons, I can only map the directional buttons on the keyboard and the back h/w button, nothing else.
[email protected] said:
I'm having trouble mapping buttons, I can only map the directional buttons on the keyboard and the back h/w button, nothing else.
Click to expand...
Click to collapse
What I did found is that you can only re-map the keys to certain combinations otherwise selecting 1 key changes all the others.
First ensure you start the game with the keyboard open
I have set them to the following on under "configuration":
Settings1
Look up: I
Look down: K
Turn right: J
Turn left: L
Low detail mode: not highlighted
Flip screen: click once to turn the page to match the keyboard direction
Blood: your own choice
Sensitivity: middle of the slider bar
Volume: own choice
Settings2
Forward: ^ up arrow on keyboard - shows as <-- arrow on the display
Back: v down arrow on keyboard - shows as --> arrow on the display
Left: < left arrow on keyboard - shows as down arrow on the display
Right: > right arrow on keyboard - shows as up arrow on the display
Aim sight: space
Grenade: no change
Swap weapon: shift
Reload: no change
Toggle pose: CTRL
Action: no change
Pause: no change
Fire: enter
Found this was about the best compromise
I've bought this game and everything for my compact iv, but i cant get the game working, the demo works and everything. When i try and run the game it says "Error: No Owner Information". How can i get into the settings to input my information ? If anyone knows...
Hy
yesterday I updated my old (and nearly forgotten) MDA2 to 5.2.28230.5.3.3 Manila
you are great!
only some very simple questions
1. Internet and mail worked yesterday - today not - without any change, what could be the reason
2. is there any program to see how many traffic I did? I have a 1 GB contract, after that the connection will be slower
3. for the foto: where can I change the folder where the pics are saved
when I touch Foto in the HOME menu the is "no foto" in the folder (the pics are in my pictures not in eigene Bilder)
for the rest - you are really great!
btw: do I have to change the ROM? I still have 1.60
for the RAM do I have to change to 30 MB (I found a 14 MB RAM free)