HSDPA fixing - Tilt, TyTN II, MDA Vario III Themes and Apps

What is the default registry to get HSDPA to work on WM6.1?
Is is:
>HKLM\Software\OEM\RIL\DisH< value=0
>HKLM\Software\OEM\RIL\EnableHSDPAIcon< value=1

Yes, but......
The setting of 1 is correct for the Enable value, but why mess with that when you can use the following tool to make this change as well a slew of others all at once:
Schap's Advanced config
And for those who are too lazy and never RTFM, here is the most current .cab 3.3
Advanced_Configuration_Tool_v3.3.cab

Related

Active Sync with new TMOBILE UK rom.

Hi,
I've just reflashed with the new UK TMobile ROM, and since then I'm having trouble using active-sync at work, I know the problem is caused by the sygate personal firewall config, but I can't change that because of company rules.
When I had the Mr Clean 2.2.4 rom installed it had a panel in the settings screen to change the USB configuration to use a different type of connection.
This worked fine.
At some point in the past I also had some registry tweaks which changed some networking parameters and that made it work fine too, I can't remember if they were on the device or on my PC.
Anyone out there remember the settings or know where I can get a .cab of that usb configuration tool?
Adam
Re: Active Sync with new TMOBILE UK rom and Sygate Firewall
adam_xda said:
Hi,
I've just reflashed with the new UK TMobile ROM, and since then I'm having trouble using active-sync at work, I know the problem is caused by the sygate personal firewall config, but I can't change that because of company rules.
When I had the Mr Clean 2.2.4 rom installed it had a panel in the settings screen to change the USB configuration to use a different type of connection.
This worked fine.
At some point in the past I also had some registry tweaks which changed some networking parameters and that made it work fine too, I can't remember if they were on the device or on my PC.
Anyone out there remember the settings or know where I can get a .cab of that usb configuration tool?
Adam
Click to expand...
Click to collapse
If your device uses Windows Mobile 5 you must open some ports in the sygate firewall settings: http://www.microsoft.com/windowsmobile/help/activesync/sygate.mspx.
Also it's necessary to change the RNDIS driver settings in the mobile phones registry as well!
Use a regedit tool like PHM Registry Editor.
Here are the settings to be added (or to be changed respectively):
Key: HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\RNDIS
Name of the Value to add: MTU
Type : DWORD
Data: 1514 (Value is Decimal)
Name of Value to add: MaxOutTransfer
Type: DWORD
Data: 1642 (Value is Decimal)
After a reset my Prophet (XDA Neo) synchronized well with active sygate firewall!

IE still goes to mobile sites after tweak?

I already changed the necessary registries, but IE still display the mobile version.
I have PIEplus installed, but it doesn't matter if I use PIEplus' settings, or change it manually...
I used the following taken from another post:
Browse to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ Windows\CurrentVersion\Internet Settings\User Agent \
Change the default value from "Mozilla/2.0" to "Mozilla/4.0".
Change the "Version" value from "MSIE 3.02" to "MSIE 6.0".
Change the "Platform" value from "Windows CE" to "Windows NT 5.1".
Might you be going through a proxy?
Is it possible that you are going through a carrier's http proxy?
alc630, this has been discussed several times in this forum. You may want to search. The problem is the browser.dll file on the Kaiser gives the agent settings to the website (as a mobile device) regardless of where you tweak it otherwise. The solution is either a hacked browser.dll file (found in here, look around) or use Opera Mobile.

just a quick question...

have any of you seen a "data" tab under phone settings? (it terminates any active internet connection when the phone goes into standby.) i had it with one of dutty's older roms but on his two newest roms that "data" tab is not there anymore. do any of you guys know a registry tweak or a program that would bring that tab back? my phone just drains the battery when its connected to the internet without me knowing (to receive email.) i have searched for it on google and all over the wiki but i haven't had any luck with how to enable it. thanks in advanced for your response.
look on the forum for modaco nodata cab
it lets you toggle the available connections
texarcana said:
look on the forum for modaco nodata cab
it lets you toggle the available connections
Click to expand...
Click to collapse
thanks for your help but i found what i was looking for i searched the registry of one on of the roms that had it active and just copy the registry name and value. here it is how to do it in case you are interested: Search for "PhoneSetting" on any registry editor and if the key "ShowPDPPage" is not there add it on as a DWord and set the value to 1. then using the Advanced Config tool scroll all the way until you see GPRS auto attach (under Data Connections) and set it to Disable, if its not disabled the connection will not disconnect even when the phone goes into standby mode.

registry editor!!!!

can anyone give me a link to a good registry editor that i can actually edit registry's..... thanx i really need one for tweaks
Please use the search button, that's what it's for.
I use PHM Registry Editor.
I use CeRegEditor.
http://ceregeditor.mdsoft.pl/
I would recommend CE Reg editor.
Hi, I got confused
I installed the CeRegistry. However when i try this tweak:
HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0" ( Wake Up on New SMS).
It says 'Access denied' and 'You can not change the value data'.
But if i try this tweak:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P10 -> change the value "enabled" from 0 to 1 (Enable GPS photo )
It works.
Mine is o2 xda Diamond.
I just wonder if i am restricted for special part of the reg that i can modify. If so how can i unlock this restriction?
There's an option in CERegEdit to unlock. There is in the one I use anyway...
TheBrit said:
There's an option in CERegEdit to unlock. There is in the one I use anyway...
Click to expand...
Click to collapse
I tried that already in under 'Tool'
It says that the reg is unlocked.
However when i try to modify the value, i still got the same error msg:
'Access denied'.
That's where i got confused
Read http://wiki.xda-developers.com/index.php?pagename=Registry editors & other, related stuff

HKLMWTF?

Ive never hacked a WM device and I have no clue how to get to the HKLM so I can make changes. Trying to find this information is exhausting so I figured Id just ask and get a simple answer.
Thanks in advance.
registry editor
as mentioned already, it is a registry value (abbreviated)
HKLM would be HKEY_LOCAL_MACHINE
tarantulus said:
as mentioned already, it is a registry value (abbreviated)
HKLM would be HKEY_LOCAL_MACHINE
Click to expand...
Click to collapse
Right, that Ive found out already(through my research). However, my question is how do I get there to use it to change things on my Diamond found here(http://forum.xda-developers.com/showthread.php?t=417873)?
you need an application to search the registry, try googling for PHM registry editor, I use that and it's good.
tarantulus said:
you need an application to search the registry, try googling for PHM registry editor, I use that and it's good.
Click to expand...
Click to collapse
Ok, I was able to get this far but how do I get to changing things on the phone registry? It seems to bring me into my desktops registry. Im really computer stupid, bare with me.
HyperM3 said:
Ok, I was able to get this far but how do I get to changing things on the phone registry? It seems to bring me into my desktops registry. Im really computer stupid, bare with me.
Click to expand...
Click to collapse
Well, if you are not that good on computer stuff maybe you should not touch the Registry Editor.
You could use simple installable .cabs to modify your Jewel how ever you want.
Why don't you state what mod you want to take forth and Members here will help you.
Greetings
if you download an exe file like PHM registry editor
if it's an exe you run it on the computer and it use activesync to install
to the pda
if it's a cab file you copy it to the pda and run it there
but as stated if you dont know what you're doing
messing around with the registry is not adviced
Sergio PC said:
Well, if you are not that good on computer stuff maybe you should not touch the Registry Editor.
You could use simple instalable .cabs to modify your Jewel how ever you want.
Why dont you state what mod you want to take forth and Member here will help you.
Greetings
Click to expand...
Click to collapse
Ok, fair enough. I installed the .cab file for the blackberry connect but have no idea where to go from there.
Secondly, Id love to be able to do the things found on the updated diamond tweaks thread.
ie:
Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
Prevent screen switching off during phone call --> HKEY_Local_Machine\Drivers\BuiltIn\RIL\EnableFastD ormantDisplayDuringCall to 0 (Note: does not work on all ROMs)
AND (tested and works on EU ROMs thanks to Rod65)
HKCU\ControlPanel\Phone\Sleep switch value from 1 to 0
Adjust screen sensitivity: HKEY_LOCAL_MACHINE\Drivers\TouchPanel
Value = PressureThreshold
Change from the default dword:00000027 or 34 to dword:000000f0 or 240 in decimal
Automatically lock your Diamond --> HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Enable Better Power Management
HKLM\Drivers\SDCARD\ClientDrivers\Class\SIM_Class
Set DisablePowerManagement = 0 (default=1)
HKLM\Drivers\SDCARD\ClientDrivers\Class\MMC_Class
Set DisablePowerManagement = 0 (default=1)
HKLM\Drivers\SDCARD\ClientDrivers\Class\NAND_Class
Set DisablePowerManagement = 0 (default=1)
Thanks. Sorry for being such a pain.
Rudegar said:
if you download an exe file like PHM registry editor
if it's an exe you run it on the computer and it use activesync to install
to the pda
if it's a cab file you copy it to the pda and run it there
but as stated if you dont know what you're doing
messing around with the registry is not adviced
Click to expand...
Click to collapse
Part of my problem is Im running off a mac mostly. I have a PC on the side but I hate using it. I figured thats the only way I can get to the registry on the phone though.
Prob best to install either Diamond Tweak or Advanced config which is like a GUI interface to do alot of the registry tweaks plus alot more.
I would also suggest that you'd get a little more help if you wouldn't use such obnoxious terms as "WTF" in the title of your post.
ssn04 said:
I would also suggest that you'd get a little more help if you wouldn't use such obnoxious terms as "WTF" in the title of your post.
Click to expand...
Click to collapse
I didnt realize it was obnoxious. I was trying to reiterate my confusion in an extreme fashion. Sorry if I offended anyone.

Categories

Resources