Hey all,
I am having troubles with the LCD on my touch diamond, i have had it for quite a while now.
In January this year, I started to notice that the soft button bar at the bottom of the screen was flickering, just the soft bar. I would turn off the screen for about half a day and it would go away, then it would happen again in a few days.
This happened for a few weeks, then it just stopped.
Now its back again, where I can see "Now Playing" faintly, as well as what is actually there ("Contacts"), but i don't have WMP open. and the whole bar flickers slightly. i just have to turn the screen of for a minute and it dissapears.
I only had WMP open for about 5 minutes..
I have the same issue. Here's what I did to (temporarily, I assume) fix the problem.
I made a white picture in MS Paint that was 640x480 pixels and put it on my phone, then set the screen to maximum brightness and left the screen on with that picture full screen. It got rid of the burnt in image.
I think the problem I had is that in my power settings, I had it to where the screen never turns off when plugged in. If I got a text message or e-mail after I plugged it in and went to bed, the screen would turn on and never turn off until morning. I've changed my power settings so even when plugged in, it doesn't stay on for more than a minute. I hope that fixes it.
mafiamike said:
I have the same issue. Here's what I did to (temporarily, I assume) fix the problem.
I made a white picture in MS Paint that was 640x480 pixels and put it on my phone, then set the screen to maximum brightness and left the screen on with that picture full screen. It got rid of the burnt in image.
I think the problem I had is that in my power settings, I had it to where the screen never turns off when plugged in. If I got a text message or e-mail after I plugged it in and went to bed, the screen would turn on and never turn off until morning. I've changed my power settings so even when plugged in, it doesn't stay on for more than a minute. I hope that fixes it.
Click to expand...
Click to collapse
I too have the same problem and i did what you said but its not working, Any other suggestion....
same here... i removed the battery for 4 hours (at night) . got up and everything went back to normal . happen once a few months ago .
i would try it tonight and see and will report back. AND i have also found another issue with my diamond of newtons ring. Now am really getting pised at htc pathetic quality phone
I'm experiencing the same problem as well.. it come and goes and I've somehow learnt to ignore it. So far it just disappears after a few hours of use.
Hey its thr with many people, A quick remedy. Increase the brightness level to max....wait fr a few seconds thn put it back to normal. Wont prevent it permanently...but yes will hold it off for a while
Happens to my Diamond too. I am now trying different versions of HSPL to see if the problem is related to it.
Related
Hi,
it's hard to believe no one asked this before but I could not found anything about this..
My Diamond (as probably every wm phone) wakes up at midnight.. but because I'm loading the battery over night it does not switch off the display completely but stays dimmed until i switch it off manally.. because it lays right next to my bed I really hate it doing that.
So is there a possibility to switch the display completly off during loading? I have the windows configuration the way that it should switch off the display after 1min in ac-mode.
Thanks in advance,
Michael
"My Diamond (as probably every wm phone) wakes up at midnight.. but because I'm loading the battery over night it does not switch off the display completely but stays dimmed until i switch it off manally.. because it lays right next to my bed I really hate it doing that.
So is there a possibility to switch the display completly off during loading? I have the windows configuration the way that it should switch off the display after 1min in ac-mode."
I'm having the exact same issue with my HTC FUZE.Wakes up, then stays in a dimmed mode until I put it back to sleep. Anyone have any ideas?
Thanks
TJ
jus go to settings/power and change the setting of the backlight to turn backlight off after 5min on external power!!!
azharsunny said:
jus go to settings/power and change the setting of the backlight to turn backlight off after 5min on external power!!!
Click to expand...
Click to collapse
The phone settings are set for backlight off after 1 minute (on external power). Once the phone wakes up, it stays on (in a dim mode) until I physically press the power button to put it back in the standby mode.
Why does it wake up at midnight?
Is it because you have installed a program that restarts it automatically?
i've noticed my diamond wakes up at midnight, feels like it doesn't go off, but does after a few minutes, all the buttons light up as well as if i a txt is about to come on, but the screen come on, i've only noticed it as i've been up late recently and i have the diamond on front of me on hy desk, my old orbit phone (which i keep meaning to sell) doesn't do it, so i can't see it being a wm bug
Weird.. My Diamond doesnt wake up at midnight
stead said:
i've noticed my diamond wakes up at midnight, feels like it doesn't go off, but does after a few minutes, all the buttons light up as well as if i a txt is about to come on, but the screen come on, i've only noticed it as i've been up late recently and i have the diamond on front of me on hy desk, my old orbit phone (which i keep meaning to sell) doesn't do it, so i can't see it being a wm bug
Click to expand...
Click to collapse
Do you (or in the past) have G-Alarm installed. This fixes a windows alarm clock bug. It switches on at midnight to do some sort of maintenance. I have found my phone no longer stays on as you describe, but I always run the latest version of g-alarm
BTW - get your orbit on ebay. I did a buy it now auction and got £150 for my Orbit a few months ago
No More Issues
I have since flashed my ROM to the NATF 4.5 and I have no more issues with the phone coming on at midnight.
Mine used to do that too, the screen would come on and the clock also switches back to the big clock which I hate. After installing galarm it went away but the clock still switches to the big clock and I have to switch it back every morning.
My Topaz also wakes up at midnight and it feels like it won´t shut off! How long should this session last to reorganize all the things? G-Alarm is installed and since then I had this issue.
I could deactivate the midnight wakeup, but I don´t think this is recommend!? Is it?
Dear Friends:
I had today a very strange problem with my xperia. I did not drop it nor it was exposed to water.
when i turn on the device i get this white halo in the middle of the screen that goes to the corners of the screen. the screen looks washed out.
never had this problem before.
please advise.
Sincerely,
If you only see patches of light around the edges and in the middle on a black background, all it is is a bit of screen bleed, its normal and most x1s are like it. The reason is the X1 has a very strong backlight, if I turn my X1 up to full brightness it hurts my eyes and I find it difficult to look at, when your using the phone normally you dont see it, only when you turn it on, when there is no image.
Xperia screen display problem.
Hi Folks,
I can see lines on my xperia ,the phone has autoadjust backlight set as of now.
When i boot up the phone i thin lines on the screen.
Please advice if its a problem with the display or any other issue.
Cheers
JJ
I experienced exactly the same problem today.
When I connected the phone to my computer, the whole screen went white.
(This was the first time I connected the phone to this particular computer.)
Then I had an incoming call, i unplugged the USB-Cable (SE Original) and took the call - which lasted maybe 10-15 minutes - when I disconnected the call the phone returned to the default today-screen, but there was now a "halo", "ring" around the screen. (See attachment.)
Immediately performed a backup and Hard Reset, but the problem persisted.
So I thought it might be heat-related, so I let the phone be, and half-an-hour later the halo had vanished.
Specs:
Xperia X1i, Swedish.
ROM-version: 1.02.936.3
ROM-date: 08/29/08
Radio: 1.06.25.29
Computer:
MB: Gigabyte EP45-DS3
CPU: Q9450
OS: Windows 7 x64.
Google: Xperia screen white halo ring overheat
I turned my backlight to max and it did not at all look like that.
Send to repair..
Yeah, that's the thing, now it's back to normal I can't make it appear again, not by turning the backlight to max, not by plugging in the cable and taking a call like the last time.
Though I once had a TFT overheat on me, don't ask, I believe it looked similar.
That too returned to normal after about an hour.
So, I guess that's the solution - Don't panic, just wait a couple of minutes.
the ssame thing is happening to me. it gets worse when i receive a call and i would have to turn the screen off and on to return to normal
Hey guys, I was wondering if somebody would be able to maybe help me diagnose the fault\problem part with my non-working diamond...
Basically I went to a club one night and the place was unbelievably steamy / humid. My phone was working one minute and then the next it wouldnt display anything on the LCD. The backlight was working however.
Since then I havent been able to get an image on the screen although when trying to turn it on, it seems to go through its startup sequence (backlight -> vibration -> beep (i think))
I havent had any power to the phone since a day after it broke (a few weeks ago).
I'd like to get it back working again but dont know exactly what part i would need to replace. I'm fairly competent with electronics .
Any help/advite would be appreciated!
Haha, ok that's odd...
I've plugged it into my pc to get some data files off about an hour ago.. forgot about it and just looked at it now and the screen is displaying!
It is displaying and accepting input although it was flickering at first (like pixel shifting). but i pressed the power button to standby the screen and pressed it again and the display is fine with no flickering ?
Ive moved the phone about and shook it quite hard to see if there's any loose connection but the display still seems fine..
Anybody have any ideas as to what it may be?
I'm not going to deem it as fixed until I know what the problem was/is lol
cheers guys
Ok screen actually keeps flickering nonstop, and sometimes 'fades away' to gray/white/black
comes back after a few seconds though
Looks like a faulty connector?
I have been given a captivate from a friend who said he dropped it in the toilet, it turned off when he grabbed it.
He said he stuck it in a bowl of rice over night after removing the battery.
First thing i did was wipe it, odin came back a full success no errors.
When i boot it i see the at&t thing & the little 3g fly by, but the screen is all cloudy. Once its booted up i see the screen locked deal and i can swipe it to unlock and and even change the pages. After a few seconds i will notice the screen starting to fade to black, all this time still being cloudy. If i manually turn the screen off with the power button for a couple minutes, i am able to turn it back on and see the cloudy screen again.
My questions are these.
Seems to me the LCD is messed up, Can i just replace the LCD?
How do i know if anything else is damaged?
Ive read about the battery indicators, both of which are still white.
ive already taken it apart , "comfortable when its a free phone", and notice a slight burn mark from a resistor on the LCD to the metal shielding that it is pressed up against.
Any ideas would be helpful.
SRobby said:
I have been given a captivate from a friend who said he dropped it in the toilet, it turned off when he grabbed it.
He said he stuck it in a bowl of rice over night after removing the battery.
First thing i did was wipe it, odin came back a full success no errors.
When i boot it i see the at&t thing & the little 3g fly by, but the screen is all cloudy. Once its booted up i see the screen locked deal and i can swipe it to unlock and and even change the pages. After a few seconds i will notice the screen starting to fade to black, all this time still being cloudy. If i manually turn the screen off with the power button for a couple minutes, i am able to turn it back on and see the cloudy screen again.
My questions are these.
Seems to me the LCD is messed up, Can i just replace the LCD?
How do i know if anything else is damaged?
Ive read about the battery indicators, both of which are still white.
ive already taken it apart , "comfortable when its a free phone", and notice a slight burn mark from a resistor on the LCD to the metal shielding that it is pressed up against.
Any ideas would be helpful.
Click to expand...
Click to collapse
To test whether all the sensors, vibration, touch screen, LED colors, magnetic sensors works properly, install and use SGS Tools..
There are lot of tests and testing modes available there.. hope this helps
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
I would say it's a warranty job, just tried turning my brightness to zero and you can still see the screen.
I did have a similar problem on an old note that had root and custom rom though but I had somehow set the volume rocker to control brightness and it had lowered itself to minimum in my pocket
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
Try pressing and holding Volume down and power button for 5 to 7 seconds to force power off, then try to boot to download mode Volume Down + Bixby + Power button and see if the download mode screen shows......if not then probably a bad screen.
Sent from my God Mode 8
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
KEVIN88GT said:
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
Click to expand...
Click to collapse
Yeah that sucks, i can imagine..... i too hate the idea of refurbished units being swapped for warranty....bs, should be brand new unit!
Sent from my God Mode 8
so I had it replaced under warranty through T mobile. Refurb phone will come in today. One quesion. Should I let the Tmobile techs do the data/settings transfer from old phone to new one or just do everything myself from scratch (which will obviously take longer).
This happened to my phone twice for the past month or so. (both in Nougat and Oreo - Non rooted) Black screen but phone seems to be responding -- I can receive calls and notifications etc -- And force reboot doesn't fix it. I've also tried drainging the phone when it first happened to me but doesn't work. HOWEVER, it gets okay so randomly. Like I just left it for couple of hours and it just worked when I hit the power button.
I did tried bringing the device to Samsung but what they did is to just manually upgrade/reset the software in their end which I could have done in my part but I just let them do it. They told me to come back if it happens again which is kinda BS.
I can conveniently say this is a Hardware issue. I will wait for it to happen again on my phone and request for a replacement. Phone is 4 months old when it first happened.
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Reprocrastinator said:
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Click to expand...
Click to collapse
If you're under warranty it will likely be a free repair, unless they find other damage. Like moisture damage.
As far as fixing it yourself, it's just about as cheap to have Samsung do it than it is to buy the parts yourself. It's $229 for Samsung to do it, and you'll maintain the water resistance rating.
same has happened to me
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
This has just happened to my note 8 too. I was about to update it and had started it. set my phone down and picked it up and phone screen is black but can hear the haptic feedback.
I can only see the lock screen and the notifications. Everytime I try to unlock my phone I only get to see a glimpse of the notescreen and then the screen turns black. Even when I try to go to camera through the lock screen the screen goes black too. When I charge my phone it heats up so I haven't really charged it as well. Has this also happened to anyone? It seems as if the phone's sensitivity still works in all places but when I unlock it the screen just goes black.
I also have problem of freezings and always rebooting. Tried soft and hard resets/factory reset. Still same problem. This phone has hardware issue. Do not buy.
I realize this thread is quite old but I have this exact same issue now. I have managed to discover some other information by playing around with various settings which are noted below. To begin with, I was able to used the AOD hack posted above for a while but it no longer works. The only way I can get my screen to come back is with a soft reset - but as soon as the screen times out or i turn it off, it goes black, with or without AOD enable. All the on screen buttons still work as well as the haptic feedback - I just can't see anything.
Now on to what I have found:
One thing I have found is if I turn off adaptive screen brightness and crank the brightness slider to the right, when it goes black I can faintly see some of the buttons - enough that I can turn the phone off or restart it from the power menu (If I switch the default setting to night that also helps to see the buttons a bit better). Also, if I enable night mode I can also see the brightness slider faintly but when I slide it left, it just makes the screen completely black and when I slide it right, it only returns it to the very faint brightness level.
So at this point I am stuck. To summarize the issue:
1. When the screen either times out or turns off, it is still "alive" but goes black. It will not return to normal brightness.
2. Turning off adaptive brightness and cranking brightness slider to right allows you to see faint buttons after screen times out but won't return to normal brightness.
3. Enabling night mode helps to see the faint buttons, in particular the brightness slider a bit better. However the screen still cannot return to normal brightness.
4. The only way to get the screen back to full brightness (albeit temporarily until the next timeout) is to turn off the phone or reset from the power menu; or soft reset holding volume down + power simultaneously.
Hopefully someone else has figured out a way to recover this. I am on Android 9 with Samsung UI 1.0
Phone is completely stock, never rooted and completely out of warranty.