Vanilla version of WM 6.5 - Tilt, TyTN II, MDA Vario III Themes and Apps

does that exist i have problems installing dansih keyboard on a full version :S

Prosasan said:
does that exist i have problems installing dansih keyboard on a full version :S
Click to expand...
Click to collapse
Hi Prosasan.
Try this. It works for me.
I have another CAB with danish hardkeys too, but I can't find it right now. Will upload later.
Both are working fine in WM6.5 ROMs

There you go.
The CAB obviously isn't made by me.
Courtesy of jcespi2005
Hope it helps.

THX
thank you very much, but i have tried the scandi keyboard but its ugly and the buttons are too small, i will try the input thx.
regards Prosasan

Prosasan said:
... but i have tried the scandi keyboard but its ugly and the buttons are too small, ...
Click to expand...
Click to collapse
No problem.
The Scandinavia keyboard is pretty much similar to the standard keyboard in (lack of) design.
I downloaded a trialversion of Resco Keyboard, as I had hoped it would work too. It doesn't, at least not on my device. Probably some WM6.5 incompatibility...
Good luck.

:S
it didn't work either :S, what can i do :?

@ Prosasan
How about this? http://forum.xda-developers.com/showthread.php?t=501407
It works great for me.
PS: Remember to get the fix for correct QVGA danish keys in post #291, courtesy of Weblance.

Related

Dutty's V3 and the keyboard

First off I love the ROM!
I just got a brand new Tilt and installed this ROM and now the punctuation on my keyboard is all mixed up. The @ and ! are switched, the ; and : and " and ' are all mixed up! I searched and couldn't find a post to fix this. I even read the first 50 pages of Dutty's post for the ROM.
Any help would be appreciated.
i had the same problem, but i think it was because it was made for hermes... but all i do for them is use the on screen keyboard.
I don't feel like slinging insults followed by "use the search better"
The Kaiser keyboard is different than the Tilt keyboard. You need to find the Tilt keyboard fix.
icewhitenewyear said:
i had the same problem, but i think it was because it was made for hermes... but all i do for them is use the on screen keyboard.
Click to expand...
Click to collapse
The ROM was found in the Kaiser Upgrading etc. subforum, so what phone is it for? It's so clear! The Hermes!
Thanks outphase!
http://forum.xda-developers.com/showthread.php?t=353577&highlight=KEYBOARD
You guys need the XT9 fix cab! Simple as that then you're good to go!
jb
jbmorales said:
You guys need the XT9 fix cab! Simple as that then you're good to go!
jb
Click to expand...
Click to collapse
What does this one do?
Also where do I get it?
jbmorales said:
You guys need the XT9 fix cab! Simple as that then you're good to go!
jb
Click to expand...
Click to collapse
The XT9 fix doesn't fix keyboard allignment. That, and Dutty's DualTouch V3 doesn't have XT9 installed anyway .
The layout is for a different version of your device. Use this cab to fix it:
http://forum.xda-developers.com/showthread.php?t=334911
Thanks gthing. I grabbed the cab earlier. Keep up the good work.

HTC Keyboard full QWERTY problem

Hi everyone,
I've tried to search in the forums but I couldn't find it.
It's not a really big issue, but it annoys me a bit..
I found that the HTC keyboard's font looks a bit different after soft resets. The font looks a bit thinner than it is supposed to. (Screenshot attached)
However, after toggling between Compact QWERTY back to Full QWERTY, the problem is gone.
This only happens with some ROMs that I've installed .. now I'm using official 1.93.707.1 WWE .. it used to happen with the elite 3.0 as well.
Has anyone experienced this?
techdave said:
Hi everyone,
I've tried to search in the forums but I couldn't find it.
It's not a really big issue, but it annoys me a bit..
I found that the HTC keyboard's font looks a bit different after soft resets. The font looks a bit thinner than it is supposed to. (Screenshot attached)
However, after toggling between Compact QWERTY back to Full QWERTY, the problem is gone.
This only happens with some ROMs that I've installed .. now I'm using official 1.93.707.1 WWE .. it used to happen with the elite 3.0 as well.
Has anyone experienced this?
Click to expand...
Click to collapse
I got the same problem with the 1.93 original dutch rom.
Still no solution here?
The same happens to me with original Vodafone ES ROM (1.93.164.2 ESN)
Noby has a solution for this problem?
ben®nie said:
Noby has a solution for this problem?
Click to expand...
Click to collapse
Omg WHY does it matter?
I have another very annoying issue with my "Full Qwerty" keyboard : it stays locked on the symbol tab, even after a soft reset, and the "ABC" button does not work anymore. Is there any way to "reset" all the settings of that keyboard (perhaps by deleting some reg keys)? Thanks in advance!
This has happened to me, too. Keen for an answer. Thanks
bugmenot said:
Omg WHY does it matter?
Click to expand...
Click to collapse
Aswers like this is just what this community needs....
ontopic:
The font problem occurs when you use a ROM that does not has the Manila plugin. If you do have it you might want to hide and show your keyboard to fix the issue.
I've attached a CAB that makes the font change from Helvetica to Segoeui it should make look your keboard just fine.
It's part of my personal tweaks so don't know where the original came from...
malagem said:
I have another very annoying issue with my "Full Qwerty" keyboard : it stays locked on the symbol tab, even after a soft reset, and the "ABC" button does not work anymore. Is there any way to "reset" all the settings of that keyboard (perhaps by deleting some reg keys)? Thanks in advance!
Click to expand...
Click to collapse
I had exactly the same problem after installing Pocket CM keyboard, I uninstalled it and the problem went away
I dunno if you have it installed though... Just thought I'd mention it...
mccune said:
I've attached a CAB that makes the font change from Helvetica to Segoeui it should make look your keboard just fine.
It's part of my personal tweaks so don't know where the original came from...
Click to expand...
Click to collapse
I've tried the .cab. Thanks for that.. the font now looks close to the original one,..almost..but not the same..
Still looks ok tho, I'm going to use it for the time being.
I think we're heading to the right direction.
owziee said:
I had exactly the same problem after installing Pocket CM keyboard, I uninstalled it and the problem went away
I dunno if you have it installed though... Just thought I'd mention it...
Click to expand...
Click to collapse
Yes, I had. I just uninstalled it and my Full Qwerty SIP is back to normal. Thanks a million for the hint. Now we need to go after Tene and ask him to fix that bug ;-)

[Req] Keyboard from Touch HD

anybody got the (onscreen) QWERTY Keyboard from the touch hd?
it has improved in some things and i would like to replace the standard qwerty with it...
Here:
http://forum.xda-developers.com/showthread.php?t=442154
But in landscape don't work, because Touch HD have 800px and Diamond 640px
thanks a lot... i don't use landscape so i don't care 'bout this disfunction
edit: does not work on my (ger) touch diamond.... messes up the keyboard graphics and is not able to uninstall
aldur said:
thanks a lot... i don't use landscape so i don't care 'bout this disfunction
edit: does not work on my (ger) touch diamond.... messes up the keyboard graphics and is not able to uninstall
Click to expand...
Click to collapse
saw that edit post to late
now my keyboard is also messed up. any hints on solving this?
if its a cab...can't you just uninstall? and soft reset
can't uninstall it anybody has a cab of the original keyboard?
liamhere said:
if its a cab...can't you just uninstall? and soft reset
Click to expand...
Click to collapse
that's what i tried but without the wanted effect
i also tried to reapply my current theme with tf3dconfig but that also don't
works for me.
Original keyboard:
http://forum.xda-developers.com/showthread.php?p=2863732
thanks for that, but first cab is a wrong one and duttys cab can't be installed because of systempriviliges (so says installer )
aldur said:
thanks for that, but first cab is a wrong one and duttys cab can't be installed because of systempriviliges (so says installer )
Click to expand...
Click to collapse
If you're using Duttys Rom, why not just reflash..?
i'm not using duttys rom-just tried the cab... but in spite of that: don't want to flash my device, because there's a lot of stuff to reinstall
aldur said:
i'm not using duttys rom-just tried the cab... but in spite of that: don't want to flash my device, because there's a lot of stuff to reinstall
Click to expand...
Click to collapse
i second that ...
damn ... now it's worse then before :/
the last cab (dutty) is a querty keypad that is way too small for the screen :/
isn't there a cab with the original files ?! (qwertz would be what i'm looking for)
i can't find it by searching the forum
crashhead said:
i second that ...
damn ... now it's worse then before :/
the last cab (dutty) is a querty keypad that is way too small for the screen :/
isn't there a cab with the original files ?! (qwertz would be what i'm looking for)
i can't find it by searching the forum
Click to expand...
Click to collapse
same prob here need orignal diamond keyboard help please
HELPPPPP how to remove this keyboard!! it just messed up every thing, not even the old one is working!!!!

Software keyboard - non english?

Hi!
I've searched the forum, but can't find any solution.
I found solution for hardware keyboard.
I DONT want to use another software keyboard than thats built in my Xperia.
I really miss our swedish characters åäö. It's really annoying to press áü before I can choose åäö.
How to get them back?
Before I tried to flash a new ROM, the original software keyboard (swedish) was much larger. Miss that too.
Try this...
http://forum.xda-developers.com/showthread.php?t=524395
This work for me. I am using touch Pro. It worths trying..
t4220 said:
Try this...
http://forum.xda-developers.com/showthread.php?t=524395
This work for me. I am using touch Pro. It worths trying..
Click to expand...
Click to collapse
Sorry, it didn't work. Can't find any settings or nothing about it.
Using WM 6.5 ROM SEX1 barebone.
No one? This is really annoying.. It's me and some friends who have this problem.
Is it possible to take the virtual keyboard from WM 6.1 and put in WM 6.5 somehow?

New Keyboards from Omnia 2 - SWYPE

Hey guys, I found this on another site (I think originally coming from MoDaCo), where it was ripped from an Omnia 2 rom.
Direct Download Link
Original MoDaCo Thread
1800pocketPC Page
_______________________________________________________________
Leo Skin​
Reserved for Bugs
hey ... cool! im looking for additional languages (czech ) any ideas?
Anyone tried on topaz?? I had but doesn't work, at least for me.
tried it on my topaz.... but it works very sloww... lags alot.. i'll stick to the finger keyboard
This is working GREAT on my AT&T Pure! Thanks to the OP for the info!!!
Works fine on my Topaz with Dutty's Rom.... but I think SlideIT seems faster and more accurate... still fun to swype words though.... Thanks for this. I will test it again when I get my HD2 next week. In the meantime, Touchpal is working great for me.... I also like fingerkeyboard as I could customize the keyboard for easy reach of smilies and combos....
I was nervous about downloading it on my Topaz/Diamond2 but hey..it's working. No lag yet.
Leo skin doesn't seem to work for me. Installed Swype then Leo skin but Swype still appears as original. I'm guessing it's just for QVGA having looked in the cab?
Looks very nice but doesn't work on my Topaz...
Topaz crashes with error, make a reboot, displays 2 error screens and thats all...
Hardreset helps...
Kreuzfelder said:
Looks very nice but doesn't work on my Topaz...
Topaz crashes with error, make a reboot, displays 2 error screens and thats all...
Hardreset helps...
Click to expand...
Click to collapse
Im surprised. What ROM are you using? It installed with no problems on mine. Perhaps you could try install again immediately after hard reset....
On my Topaz work like charm...but Leo Skin dont work.
Regards
works great on Topaz with Shadowline ROM-series...
(But no german layout/correction and so on..)​
eskasi said:
Im surprised. What ROM are you using? It installed with no problems on mine. Perhaps you could try install again immediately after hard reset....
Click to expand...
Click to collapse
Hi i'm using Dutty HG R6 German...
After Hardreset the same Problem
Works fine on my topaz, installed leo skin but didnt seem to change anything?
edit# took alook in the swype folder after installing the leo skin, seems like theres a few images missing and doesnt look like the images are for WVGA
Leo theme was made for the Omnia, so might be why its not working on your phone
Kreuzfelder said:
Hi i'm using Dutty HG R6 German...
After Hardreset the same Problem
Click to expand...
Click to collapse
I have R6 WWE on my Wife's Topaz and it works just fine
All link are deleted or it's me?
Can someone upload it on xda plz? or on a FTP/4Shared.
had problems initially when i installed it on the storage card - so uninstalled and reinstalled on device memory - now works like a charm.
i've been using it for a couple of months, and recently got hold of a wvga version. although it looks identical, i find it starts up quicker..
View attachment 267329
I had also problems, when swype was installed on storage card. Now, I installed it on my device and it is working like a charm.

Categories

Resources