Database Develop

Dutty's V3 and the keyboard

First off I love the ROM!
I just got a brand new Tilt and installed this ROM and now the punctuation on my keyboard is all mixed up. The @ and ! are switched, the ; and : and " and ' are all mixed up! I searched and couldn't find a post to fix this. I even read the first 50 pages of Dutty's post for the ROM.
Any help would be appreciated.

i had the same problem, but i think it was because it was made for hermes... but all i do for them is use the on screen keyboard.

I don't feel like slinging insults followed by "use the search better"
The Kaiser keyboard is different than the Tilt keyboard. You need to find the Tilt keyboard fix.
icewhitenewyear said:
i had the same problem, but i think it was because it was made for hermes... but all i do for them is use the on screen keyboard.
Click to expand...
Click to collapse
The ROM was found in the Kaiser Upgrading etc. subforum, so what phone is it for? It's so clear! The Hermes!

Thanks outphase!

http://forum.xda-developers.com/showthread.php?t=353577&highlight=KEYBOARD

You guys need the XT9 fix cab! Simple as that then you're good to go!
jb

jbmorales said:
You guys need the XT9 fix cab! Simple as that then you're good to go!
jb
Click to expand...
Click to collapse
What does this one do?
Also where do I get it?

jbmorales said:
You guys need the XT9 fix cab! Simple as that then you're good to go!
jb
Click to expand...
Click to collapse
The XT9 fix doesn't fix keyboard allignment. That, and Dutty's DualTouch V3 doesn't have XT9 installed anyway .

The layout is for a different version of your device. Use this cab to fix it:
http://forum.xda-developers.com/showthread.php?t=334911

Thanks gthing. I grabbed the cab earlier. Keep up the good work.

HTC Keyboard full QWERTY problem

Hi everyone,
I've tried to search in the forums but I couldn't find it.
It's not a really big issue, but it annoys me a bit..
I found that the HTC keyboard's font looks a bit different after soft resets. The font looks a bit thinner than it is supposed to. (Screenshot attached)
However, after toggling between Compact QWERTY back to Full QWERTY, the problem is gone.
This only happens with some ROMs that I've installed .. now I'm using official 1.93.707.1 WWE .. it used to happen with the elite 3.0 as well.
Has anyone experienced this?

techdave said:
Hi everyone,
I've tried to search in the forums but I couldn't find it.
It's not a really big issue, but it annoys me a bit..
I found that the HTC keyboard's font looks a bit different after soft resets. The font looks a bit thinner than it is supposed to. (Screenshot attached)
However, after toggling between Compact QWERTY back to Full QWERTY, the problem is gone.
This only happens with some ROMs that I've installed .. now I'm using official 1.93.707.1 WWE .. it used to happen with the elite 3.0 as well.
Has anyone experienced this?
Click to expand...
Click to collapse
I got the same problem with the 1.93 original dutch rom.
Still no solution here?

The same happens to me with original Vodafone ES ROM (1.93.164.2 ESN)

Noby has a solution for this problem?

ben®nie said:
Noby has a solution for this problem?
Click to expand...
Click to collapse
Omg WHY does it matter?

I have another very annoying issue with my "Full Qwerty" keyboard : it stays locked on the symbol tab, even after a soft reset, and the "ABC" button does not work anymore. Is there any way to "reset" all the settings of that keyboard (perhaps by deleting some reg keys)? Thanks in advance!

This has happened to me, too. Keen for an answer. Thanks

bugmenot said:
Omg WHY does it matter?
Click to expand...
Click to collapse
Aswers like this is just what this community needs....
ontopic:
The font problem occurs when you use a ROM that does not has the Manila plugin. If you do have it you might want to hide and show your keyboard to fix the issue.
I've attached a CAB that makes the font change from Helvetica to Segoeui it should make look your keboard just fine.
It's part of my personal tweaks so don't know where the original came from...

malagem said:
I have another very annoying issue with my "Full Qwerty" keyboard : it stays locked on the symbol tab, even after a soft reset, and the "ABC" button does not work anymore. Is there any way to "reset" all the settings of that keyboard (perhaps by deleting some reg keys)? Thanks in advance!
Click to expand...
Click to collapse
I had exactly the same problem after installing Pocket CM keyboard, I uninstalled it and the problem went away
I dunno if you have it installed though... Just thought I'd mention it...

mccune said:
I've attached a CAB that makes the font change from Helvetica to Segoeui it should make look your keboard just fine.
It's part of my personal tweaks so don't know where the original came from...
Click to expand...
Click to collapse
I've tried the .cab. Thanks for that.. the font now looks close to the original one,..almost..but not the same..
Still looks ok tho, I'm going to use it for the time being.
I think we're heading to the right direction.

owziee said:
I had exactly the same problem after installing Pocket CM keyboard, I uninstalled it and the problem went away
I dunno if you have it installed though... Just thought I'd mention it...
Click to expand...
Click to collapse
Yes, I had. I just uninstalled it and my Full Qwerty SIP is back to normal. Thanks a million for the hint. Now we need to go after Tene and ask him to fix that bug ;-)

All SIP's go back to default SIP.

I've gone through multiple Roms, different versions of hyperdragon III, and different versions of PDAcorner. When I try to select a different keyboard, it loads for a second, then goes back to the default. The only keyboards that work are other defaults, such as Block Recognizer, Letter Recognizer, and Symbol Pad.
SOMETIMES PCM keyboard works, but NEVER has any of the diamond keyboards every worked.
I've even tried SIPchange, but the same thing happens. I assume the same has happened to you guys too? did you ever fix it?
thanks!

Is it just me?
How many of you use the Diamond Keyboard, or keyboard other than the default?

default IM
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.

Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
The default cab is the ticket...it works when everything else fails. I don't even bother with the other stuff now. If the sip won't stick, I just install that cab and select it. A soft reset later and you are good to go.

Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
I'm not sure what you mean by default im cab for wm5... lol

mikeeey said:
I'm not sure what you mean by default im cab for wm5... lol
Click to expand...
Click to collapse
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...

parleyp said:
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
Click to expand...
Click to collapse
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?

default im selector instructions
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
.
edit:
sipchange and imSelector did nothing... could someone kindly link me to the 2 keyboards? lol
thanks.
.
edit: (5 seconds later)
PCMkeyboard just quit working again...
Click to expand...
Click to collapse
1. install the default im wm5 cab above
2. install the opal keyboard you want
3. start > programs > im selector > opal keyboard
4. start > settings > personal > input > opal keyboard
5. soft reset
-----
you may need 2 soft reset twice before it cooperates. if you have your phone password protected, the default keyboard you selected will never show until AFTER you enter the password.
only RARELY do i get a glitch now, and a reset usually fixes the problem.
let us know!

mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
Click to expand...
Click to collapse
I am in the same boat as you and the only keyboard that I have gotten to work is resco keyboard.....I have same exact problems as you...did you ask SJ about it....

SJ's opal keyboard
im having problems attaching files, but SJ's keyboards can be found here.
apply the default im instructions and a couple of soft resets later, you should be good 2 go.

I played with a Samsung Omnia yesterday, I really liked the keyboard SIP, is it possible to download and get to work on our kaiser's.

not sure...

Vanilla version of WM 6.5

does that exist i have problems installing dansih keyboard on a full version :S

Prosasan said:
does that exist i have problems installing dansih keyboard on a full version :S
Click to expand...
Click to collapse
Hi Prosasan.
Try this. It works for me.
I have another CAB with danish hardkeys too, but I can't find it right now. Will upload later.
Both are working fine in WM6.5 ROMs

There you go.
The CAB obviously isn't made by me.
Courtesy of jcespi2005
Hope it helps.

THX
thank you very much, but i have tried the scandi keyboard but its ugly and the buttons are too small, i will try the input thx.
regards Prosasan

Prosasan said:
... but i have tried the scandi keyboard but its ugly and the buttons are too small, ...
Click to expand...
Click to collapse
No problem.
The Scandinavia keyboard is pretty much similar to the standard keyboard in (lack of) design.
I downloaded a trialversion of Resco Keyboard, as I had hoped it would work too. It doesn't, at least not on my device. Probably some WM6.5 incompatibility...
Good luck.

:S
it didn't work either :S, what can i do :?

@ Prosasan
How about this? http://forum.xda-developers.com/showthread.php?t=501407
It works great for me.
PS: Remember to get the fix for correct QVGA danish keys in post #291, courtesy of Weblance.

Finger friendly Keyboard

Hello Guys,
Can anyone suggest me best finger friendly keyboard for HTC touch viva. I have tried FingerKeyboard2.1 but it didn't support my device.
Thanks,
Chaitu

Hello, I use phonepad goes well with the multilingual and T9

thanks for reply. can you post download link here?

It works
chaitu18 said:
Hello Guys,
Can anyone suggest me best finger friendly keyboard for HTC touch viva. I have tried FingerKeyboard2.1 but it didn't support my device.
Thanks,
Chaitu
Click to expand...
Click to collapse
FingkeyKeyboard 2.1 works great on my touch viva. have you installed the version specifically for QVGA devices?

Ok may be i had not selected correct .cab
FingerKeyb-2.1-VGA-utak3er.cab
FingerKeyb-2.1-QVGA-utak3er.cab
FingerKeyb-2.1.1 VGA by Giannis86.cab
FingerKeyb-2.1-VGA-arrows-Giannis86.cab
FingerKeyb-2.1-WVGA.cab
FingerKeyb-2.1-WQVGA.cab
FingerKeyb-2.1-QVGA-Giannis86.cab
FingerKeyb-2.1-QVGA-arrows-Giannis86.cab
can you please tell me from above list which one should i download for my HTC touch Viva?

chaitu18 said:
Ok may be i had not selected correct .cab
FingerKeyb-2.1-VGA-utak3er.cab
FingerKeyb-2.1-QVGA-utak3er.cab
FingerKeyb-2.1.1 VGA by Giannis86.cab
FingerKeyb-2.1-VGA-arrows-Giannis86.cab
FingerKeyb-2.1-WVGA.cab
FingerKeyb-2.1-WQVGA.cab
FingerKeyb-2.1-QVGA-Giannis86.cab
FingerKeyb-2.1-QVGA-arrows-Giannis86.cab
can you please tell me from above list which one should i download for my HTC touch Viva?
Click to expand...
Click to collapse
FingerKeyb-2.1-QVGA-Giannis86.cab [works best]
FingerKeyb-2.1-QVGA-arrows-Giannis86.cab [same as above but with arrows. takes up more screen real estate]

Cooooooooooooooooool!!!!!!! its working gr888888888888888888888888!!!!
Thanks dude

bug
has anyone been having an issue with finger keyboard? ive tried installing it and its the best keypad ever, but after a while, there's a bug which i dont know why it happens. somehow the keyboard doesnt appear when i try to reply to a message or compose a message. so i cant type in anything coz none of the keyboards are already avaialable. so i have to uninstall the app and restart my phone.
why does this happen?

twice
remcyl said:
has anyone been having an issue with finger keyboard? ive tried installing it and its the best keypad ever, but after a while, there's a bug which i dont know why it happens. somehow the keyboard doesnt appear when i try to reply to a message or compose a message. so i cant type in anything coz none of the keyboards are already avaialable. so i have to uninstall the app and restart my phone.
why does this happen?
Click to expand...
Click to collapse
happened twice to me. i just soft reset the device and its back to normal. what sms prog are u using? the default one?

Hey chaitu18, I'd suggest u try out 'ExIdeas MessagEase', its not basically a keyboard based software, but i bet dat u dont want any other "Finger friendly Keyboard" once u get used to this... hope this helped

Yash314 said:
Hey chaitu18, I'd suggest u try out 'ExIdeas MessagEase', its not basically a keyboard based software, but i bet dat u dont want any other "Finger friendly Keyboard" once u get used to this... hope this helped
Click to expand...
Click to collapse
its not free dude.

try resco keyboard or touchpal but it is only demo version u will have buy full sofware