Related
If some of the app programmers in here are looking for an idea to an app/tweak for the S730 (or other phones), i have a suggestion :
It would be such a cool feature if, when you are talking on the phone normally and you decide to slide out the qwerty keyboard the phone automaticly puts the call on loudspeaker, and when you slide the qwerty keyboard back in it automaticlly goes back to 'normal' phone mode.
Fx. when you are driving and need to put in on loudspeaker its easier to slide out the keuboard. Or if you want to add an appointment or contact while talking to someone its way easier to just slide out the keyboard and start typing.
I really hope someone can code such an app. I would be a very happy little piggy
Is it even possible to mske such an app?
I dont wanna go around hoping for it if it's not possible
Same for Tilt. It can really be a bugger to answer. Sliding back to vertical seems to put caller on hold. Very dangerous to answer in car w/o bluetooth.
there's clearly something being called when you open the phone. it's a matter of figuring out what, putting a watch on it; then, when activated, making the necessary reg changes/api calls to do whatever you want. Obviously. Too bad I don't have a working version of Visual Studio.
bigflavor said:
there's clearly something being called when you open the phone. it's a matter of figuring out what, putting a watch on it; then, when activated, making the necessary reg changes/api calls to do whatever you want. Obviously. Too bad I don't have a working version of Visual Studio.
Click to expand...
Click to collapse
Good to hear that is it possible. Hope someone makes that app some day.
Could u make it if you had Visual Studio? Ill buy it for you
martinbr said:
Good to hear that is it possible. Hope someone makes that app some day.
Could u make it if you had Visual Studio? Ill buy it for you
Click to expand...
Click to collapse
Sure thing. Actually I had installed it on Vista. Something happened (I think with an SP upgrade), and it no longer starts; and I can not uninstall it.
Lovely, Vista. Lovely.
It's pretty easy to be notified when keyboard is out and incoming call is detected.. I guess, the harder part is to programmatically switch on loud speaker (without simulating menu presses). But, maybe it's easy, i've not touch the phone or RIL API yet..
Well i really hope that you Saman-cz or bigflavor or someone else could program it. It would be really cool. I used to have it on my Nokia Communicator and it was a great feature that i used a lot.
If someone makes it for the S730 would it work on other slide out smartphone as well?
just found out:
Hit Green Call button "long" (hold it for about two seconds) while in a call and it will toggle speakerphone.
great hint. thanks
Cool. Not as good as the keyboard app , but very very usefull. Thanks.
This .cab will create a short vibrate everytime you press a number when dialing a number.
***this is the updated version. Will only work on 6.1***
please report any problems.
I have noticed a quicker response time, i might be crazy to.
**for people with problems getting the error, install the second one**
Confirmed working on....
L26KDV12------------OUTSTANDING RESPONSE
HYPERDRAGONIIIPRO--SLIGHT DELAY BUT GOOD
ATT 6.0--WORKS DECENT
ATT 6.1--SUCKS ASS BUT WORKS
hey i just tryed the Cab Works great thanx!!!! =D
RussianTechno101 said:
hey i just tryed the Cab Works great thanx!!!! =D
Click to expand...
Click to collapse
Not a problem, ever since my wife got the motorola z9 it has tactile response (vib when button pressed) i thought it would be great for the tilt. I always miss a number using the dialer.
Perhaps the updated video drivers will provider a better response time on the touch screen...
*sigh* hope HTC actually follows through, otherwise I may lean a bit more toward another manufacturer next time (I like playing games during lunch breaks, and when i take the train -- most game's i've found, even basic ones that run on my T-Mobile Wing (HTC Herald), fail on the tilt :-(
KD8DNS said:
This .cab will create a short vibrate everytime you press a number when dialing a number.
Click to expand...
Click to collapse
Nice bro. You go from being banned for a week and come back with an app. To the mods, ban this guy some more. No telling what he will come back with.
J/K
P1Tater said:
Nice bro. You go from being banned for a week and come back with an app. To the mods, ban this guy some more. No telling what he will come back with.
J/K
Click to expand...
Click to collapse
i also created the voice command announcement fix, it fixes the problem of msvc 1.6 not announcing calls on the tilt. link here http://forum.xda-developers.com/showthread.php?t=388964
hey, so do the short or long tones need to be on? as i have them turned off and the vibrate feature doesn't work.
krkonose said:
hey, so do the short or long tones need to be on? as i have them turned off and the vibrate feature doesn't work.
Click to expand...
Click to collapse
long, and if that dosn't work let me know what rom, and dialer your using and ill do some troubleshooting. and are you sure the cab installed and.
Hey, I downloaded it and installed it but it wont work. I also noticed that when I punch in a number on the keypad, there is no tone. what should I do?
Thanks
I am using
RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
WM 6.1
Thanks
KD8DNS said:
This .cab will create a short vibrate everytime you press a number when dialing a number.
Click to expand...
Click to collapse
...and this one should remove it!
tnyynt said:
...and this one should remove it!
Click to expand...
Click to collapse
thank you very much for that.
What is the difference between this vibrate keypad CAB and the previously released vibrate keypad CAB (as seen in this thread) ???
Charles
polyrhythmic said:
What is the difference between this vibrate keypad CAB and the previously released vibrate keypad CAB (as seen in this thread) ???
Charles
Click to expand...
Click to collapse
HA HA HA. Wow looks like someone else had the same idea about 3 years ago. Boy did i waste my time. But i guess to answer your question .zip vs .cab other than ripping it apart to inspect how it was written, and it was posted in the Magician forum. Oh well i guess i wasted my time, but on the other hand i hope people found it useful.
Argh, for me, nothing work, no vibrate, no sound.
yeantbron said:
Argh, for me, nothing work, no vibrate, no sound.
Click to expand...
Click to collapse
make sure dtmf short tones are on.
oups...sorry, sometimes, i'm very stupid lol
Thank you !!!
Hey this cab works great for me. Is there anything that will produce the same type of feedback for the soft keyboard? Or would that depend on the sip?
elypsar said:
Hey this cab works great for me. Is there anything that will produce the same type of feedback for the soft keyboard? Or would that depend on the sip?
Click to expand...
Click to collapse
Let me do a little reasearch.
I appreciate it!
KD8DNS said:
Let me do a little reasearch.
Click to expand...
Click to collapse
Any news on this at all?
...but can you really not simply call someone who has just texted without having to revert to pen and paper???
TIA
Sure, just press the Phone button.
That certainly doesn't work on my phone (standard UK 1.37.405.1 WWE).
When I hit the phone button, all I get is the keypad, with the last event in the call history highlighted.
I have to say, I've tried all ways I can think of with this issue, and I'm amazed something so fundamental appears to be missing. I can't remember how many times I got texts on my old phone only to decide the answer was too complex to text and decided a phone call was more appropriate. On my old phone I just cut the sender from the text and pasted it on the dialer, and that was a 'simple' Samsung D900... so what's going on with the Diamond I need to start carrying a paper and pen.
Please someone tell me I'm missing something, or that there's a trick other than having to temporarily enter them in my contacts or need to start exercising my extremely short term memory?
Hi,
If you open all messages and hit the call button, verify the number and call.
Works on my UK Diamond.
Ok.....
Seriously....?
Why did you buy the phone in the 1st place?
Cos it was "Pretty"?
If you go to your inbox, showing all your text messages, select the conversation between you and the person you want to call.
Then use the directional pad to select their part of the conversation (you will know this because their text message and name will be highlighted - might be highlighted blue, it is on mine...) then simply press the call key, (very bottom left of the handset).
You don't have to press any other other buttons.
It will ask you to confirm before it actually dials.
Didn't your phone come with a user manual? - I'll explain how that works.... you pick it up and page through it using your hands, it also comes with extra features such as an index at the back and a table of contents at the front.......
........Or is it like anyone who owns a BMW or Mercedes who was supplied with one that didn't come with indicators!
.
.
.
.
.
.
woolytoon, thanks very much, seems I was missing something.
kidinspace, also thanks to you... and by the way, I'm on holiday and my user manual is at home... growupinspace springs to mind.
studz said:
woolytoon, thanks very much, seems I was missing something.
kidinspace, also thanks to you... and by the way, I'm on holiday and my user manual is at home... growupinspace springs to mind.
Click to expand...
Click to collapse
No worries, I was actually quite drunk the other night when I done that and was in a really sarcastic mood that day...
Enjoy the rest of your holiday!
.G.
kidinspace said:
Didn't your phone come with a user manual? - I'll explain how that works.... you pick it up and page through it using your hands
Click to expand...
Click to collapse
Have you seen the Orange manual? It bears no resemblance to the phone!
TheBrit said:
Have you seen the Orange manual? It bears no resemblance to the phone!
Click to expand...
Click to collapse
I didn't get the Orange User Manual I was lucky enough to get a HTC one, in fact everything about mine was HTC I don't even have the the Orange Logo on the back of it, the only Orange thing it has is the SIM lock....weird
.G.
Hey Studz, no probs man.
Glad this thread didn't become ugly.
I guess for the guys who are developing ROMS and stuff, questions from newbies can be a pain in the ass. Perhaps there should be a section for "I'm sorry, I know I should be able to work this out, but I've tried for 3 days and can't :eek"
I'd probably fill it!!
Good afternoon!
I've tried to ask these question on other forums, but almost nobody gave me an answer. There were some about different software to use, but it didn't really help. So I would be very pleased if you, dear X1 gurus, answer these question. Please, if you know the answer - write it here for me and other people. Thank you very much in advance!
The priority is: I. How to solve the problem using native software or registry? II. If and only if the first is not possible, how to solve it using different software?
1. Where in file system the vocabulary of words which were inputted before is situated? It's a vocabulary with these tooltips-words while typing. Can I get it somewhere form my phone and backup or even edit?
2. How can I check my X1 uptime?
A: As yet I know only one way: use AEButton Plus. You can correct or supplement this opinion(and please do it) if you know more on that.
3. Someone called me from number +ХХХ, I want to call him back, BUT to add a zero between + and the first digit(+0XXX). How can I do it? I can't copy this number and there is no options like "change then dial". The one and only solution for it - is to choose "send SMS" and copy the number from the "From" field! But is it useful and normal for a device which costs about 500 euro?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
4. Imagine: you have a contact Ivan in your contacts, which has 2 phone numbers: mobile and work. Two sms arrive to your phone: one is from his home number, another is from work. Sms inbox displays both of it as "Ivan". How do I know which sms is sent from what number?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
5. How can I copy a number which was dialed earlier or number from contacts? I see only one way(but it's weird): chose "edit contact" and copy from the field. Is there another way?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
6. While a phone conversation how can I easily save a number which my friend is saying to me? I tried to dial it while a call is active, it's ok, but once the call is dropped, my number disappears! Yes, I can create a note using a special touch-key, but it's not useful, because I should use my keypad and then should copy that number, but I need to dial it! How can it be solved?
7. Have anybody experienced a problem while taking a photo of many different objects? I had. It happened when I took a photo of a forest - there were a lot of trees alongside each other and after pressing shot button, "Saving..." was displayed on my screen for about 15 minutes! After it said that it failed to take a photo. What it can be?
8. Where can I find all my earlier connected WiFi points and passwords? I want to save it before upgrading my firmware. Can I backup it?
9. Can I turn of a feature of turning my screen light on when I plugging my X1 to PC? I don't want this light to be turning on when I do it! Is it possible?
10. While surfing internet via GPRS/EDGE or getting my email from server, my GSM part of device seems to be "unconsciousness": when somebody calls me, I'm "out of zone". How can I fix it? I want my GSM part to be number 1 by priority!
11. I can see anything when the sun is shining. I know everybody with X1 can't. But can I "ask" my backlight to help me? For example, set it to turn maximum power when on the light, or something? I'm asking because, as I've understood, my auto-backlight works vice versa: when it's bright - it turns off, when it's dark - it turns its max power. I want max power when it's very bright too!
A: People say that screen protector with anti-glare really helps.
12. When an SMS is coming, I get a popup notification at the bottom of the screen. I can either press "Reply" or "Options". If I press reply, the chat mode opens and I can reply, seeing all our conversation. BUT if I go to my address book and choose "New SMS" on a contact, different form will be opened, just like for e-mail composing. And here is a question: how can I make this "e-mail composing" style sms appearing after I press "Reply" when new sms arrived? I know how to turn the chat mode off, but I don't need it to be turned off completely, because it's useful while reading sms from one person. I just want reply to a person using simple form. Is it possible somehow? I think that if it's can be made by hands(New sms from contacts), then it could be implemented programmatically... maybe some values in registry?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
13. At the screens you can see screenshots from my X1 with R2A0010 and 1.14 radio: 1 hour after powering on and 2 days after powering on. Why there is such a difference in memory consumption in some system processes? Is it an ordinary thing?
A: People say that it's normal. You can correct or supplement this opinion(and please do it) if you know more on that.
Thank you very much in advance again!
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
#5, go to call log in the phone dialer and there is a menu option to save to contacts. If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
PhoneX can do these two.
WhyBe said:
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
Click to expand...
Click to collapse
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
WhyBe said:
#5, go to call log in the phone dialer and there is a menu option to save to contacts.
Click to expand...
Click to collapse
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
WhyBe said:
If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
Click to expand...
Click to collapse
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
VNMenIeu said:
PhoneX can do these two.
Click to expand...
Click to collapse
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
BRING ON THE QUESTIONS!!!!!!!!!
1 - I don't know.
2 - AEB Button Plus has such a feature.
3, 4, 5, 6, 12 - I use PhoneEx sorry.
7 - Never heard of it. Upgrade your device to R3A and try again.
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
10 - Never had that problem. Are you using a custom ROM?
11 - I can see the screen very good in the sun, because I use a screen protector with anti-glare. Buy one and be amazed.
13 - It is normal.
J-Pro said:
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
Click to expand...
Click to collapse
PhoneEX is way more useful than org. dialer
orelsi said:
BRING ON THE QUESTIONS!!!!!!!!!
...
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
I've been using the PhoneEx trial for a few days and it doesn't do #5 and #6. If any workaround involves tons of keypresses and program changing (during the call) to accomplish, then it fails. I think the OP is looking for a quick way of accomplishing these things during a call. Going to the notes application during a call only partly works. In order to actually use that number you may have jotted down in notes, you have to find the file and call the number from the notes file...not very elegant. There should be a means of jotting down numbers while in the dialer (without sending out tones causing your voicemail to go crazy) so that you may call or save them during or afterwards.
Also, I may be wrong but, how do you add additional numbers to a contact without copying and then going into edit contact then pasting? For example, how do you add a home number to a contact that already has a work number without manually going into edit contact and adding it. There should be a "merge with existing contact" feature within the dialer menus.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
WhyBe said:
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
Click to expand...
Click to collapse
That is your right, but not my problem.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
spikegotti said:
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
Click to expand...
Click to collapse
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
same...i think it's the most useful app in my fone.
WhyBe said:
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
Click to expand...
Click to collapse
Sorry, I can't understand what you want .
J-Pro or others,
what is the task manager in screenshots in first post?
It's not a biult-in one??
orelsi said:
1 - I don't know.
Click to expand...
Click to collapse
Thank you, it really helped me!
orelsi said:
2 - AEB Button Plus has such a feature.
Click to expand...
Click to collapse
Didn't know, thank you.
orelsi said:
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
orelsi said:
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
Click to expand...
Click to collapse
If somebody has it, please, post it here...
orelsi said:
10 - Never had that problem. Are you using a custom ROM?
Click to expand...
Click to collapse
No, my rom is R2A0010 UK WWE.
doministry said:
what is the task manager in screenshots in first post? It's not a biult-in one??
Click to expand...
Click to collapse
It's FdcSoft Task Manager
J-Pro said:
Thank you, it really helped me!
Didn't know, thank you.
Click to expand...
Click to collapse
You are welcome!
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
Click to expand...
Click to collapse
Sorry as in "I use superior product ftw" .
Unfortunatelly the nature of WinMo is that you need to add third party soft most of the time. That's the way it works.
orelsi said:
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
Click to expand...
Click to collapse
Checked all txt(and other) files in windows folder. There are nothing about wifi settings...
J-Pro said:
It's FdcSoft Task Manager
Click to expand...
Click to collapse
Thank you for help!
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
VNMenIeu said:
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
Click to expand...
Click to collapse
Just for fun My work computer can be running for month or so... Sometimes it's interesting for how much your X1 is powered on. For example, if I see any bugs on it, I question myself: "How long does this thing work? Maybe it's time for an SR?". If I found that it's only a day - I would be very curious. And if it's already a week - I do an SR without any additional thoughts That's my answer
Hi i'm a newbee, i just got an htc diamond and i have a little problem. I don't know how to make a call. I can only call my contacts but i sometimes i just need to make call a number that i don't want to add i my conctacts. I look for, but i don't found any thread about this problem.
Maybe it sounds stupid but this basic fonctions appears to be hard to found.
Thank you very much, best regards.
smx11 said:
Hi i'm a newbee, i just got an htc diamond and i have a little problem. I don't know how to make a call. I can only call my contacts but i sometimes i just need to make call a number that i don't want to add i my conctacts. I look for, but i don't found any thread about this problem.
Maybe it sounds stupid but this basic fonctions appears to be hard to found.
Thank you very much, best regards.
Click to expand...
Click to collapse
Just press the bottom left send key and the dialer will come up.
mr.horndoctor said:
Just press the bottom left send key and the dialer will come up.
Click to expand...
Click to collapse
Tanks for your answer, i finally found the problem: this bottom wasn't working on my diamond so the customers service gave me a new one.
Sorry for this question.