cant view call history? do you guys have any idea why? i have them listed as 4 missed then when i try opening nothing happenes. thanks for any help.
custom os? did you install any programs recently?
got it fixed thanks anyways. i installed vista dialer and that took care of it. thanks again
Related
I installed the Palm thread app ripped from WM6 device board and everything works except sending MMS I keep getting out of memory errors. I made sure that the pic is under 300k but as soon as I hit Send I get the message. I'm with cingular/at&t. I have searched regarding this but I noticed that for some people it works fine and other not so its hit or miss. But I wanted to know if anyone else has tried to use this on there kaiser.
Thanks
i tried it and no, you cant send any MMS's (I tried some of the other varients found elsewhere on this forum but none work better). In fact I found that this app had knock on problems all over my TYTN II and slowed down the machine considerably. Since this isnt an app you can just remove I had to do a hard reset.
Thanks for the reply hopefully someone figures out a fix for the slowness and mms not working on the tytn II
No one else has tried Palm threading app on there Keiser yet? and has mms working with AT&T??
I too tried it on my Kaiser and could not get the mms to work no matter what size file I tried, it would give me the memory error. I was able to uninstall it through the add/remove programs though and not have to do a hard reset.
jhernand1102 said:
I too tried it on my Kaiser and could not get the mms to work no matter what size file I tried, it would give me the memory error. I was able to uninstall it through the add/remove programs though and not have to do a hard reset.
Click to expand...
Click to collapse
I am experiencing the same. Luckily I don't use MMS very much so if I absolutely need it I can Uninstall Threaded SMS and fetch the incoming MMS then re-install threaded sms. I had same issue with Cingular 8525..Too bad, this is the best threaded sms app out there to me. I can't understand why they haven't built a threaded sms app that comes pre-installed. So basic. Everyone uses SMS. What are they thinking?
any updates on this one yet? I miss my threaded SMS/MMS
**** it doesnt work for me either
****ing BS...please shogun mark, HELP!!!
i wanna stress how important this app is to me.....i was sooo ****ing excited to go from 8525 to kaiser. this actually almost makes me wanna go back.... even though the kaiser is soooooo much sweeter. im beggiing someone to please please work on a fix for this!! please
has anyonetried setting up theconnection settings by hand in the Palm app? I always did myself and it works great
austinsnyc said:
has anyonetried setting up theconnection settings by hand in the Palm app? I always did myself and it works great
Click to expand...
Click to collapse
Which version of Palm threading app are you using?? I have tried to setup the correct settings for the ATT mms part and still as soon as I try to send a mms i get the "out of memory error"
if anyone gets it to work they are brilliant...i have the shogunmark version from windows mobile 6
ttttttttttttt
It is a known bug in the app. Just be thankful we have what we have. To better understand, go here:
http://forum.ppcgeeks.com/showthread.php?t=621
Works for me. The Shogun version thats circulated around doesnt work. You need the full version. Do a search and you might find it. THe problems are the same on most WM6 devices, and not just the Kaiser.
P.S. Some f-in patience might make people actually want to help you. 6 posts, half dropping F bombs doesn't endear you to the community.
Temporary Fix
Well this is what I do to have palm threading and MMS working on my Tilt witch is something I have asked before but haven't gotten an answer but this is my crazy hack or whatever you want to call it.
My theory was well since the MMS portion for Palm threading is out of the question regarding a fix from what I have been reading about. I asked before If after you install palm threading is there away to enable again the default MMS application that came with the phone like that giving you the option to use palm threading for Txt's and sending MMS' to be sent by the default application witch i like better.
I have the files but I dont know where to upload them too but if someone can post them up I will send it to them.
Basically I managed to get me the cab installation of Arcsoft MMS composer ver 4.0.21.28 .. I noticed that tilt has a new version 4.0.3.?? anyways so basically this is what I did..
1) install Palm threading application - reboot device
2) Install Arcsoft MMS application - reboot Device
3) Install EnableMMS.cab - Reboot
4) Re-apply ATT MMS cab configuration so that MMS gets configured
Now when I press on the email key I get the option to compose a MMS and I can receive them fine..
Like i said this is something I just tried for the heck of it and it worked but I dont guaranteed it will work for everyone. I have tried this on the Tytn II and now I just received my Tilt and it works good.
If there was a way to just re-enable the MMS portion I think there wouldnt need to install the slightly older version of arcsoft composer viewer but I havent able to figure it out..
PS. I tried uploading the zip files but it keeps telling upload of file failed..
Can you e-mail me those files, please.
Hi, is someone able to upload these files somewhere?......thanks in advance
ok here they are.. Let me know if they work for you
http://rapidshare.com/files/61245824/MMSsetup.zip
Thanks doug0365, i will have to do a full backup first on my kaiser before i install the files......its missing the threadersms.cab though....but thats ok i found the file in the kaiser forum.......will report back later today of the outcome.....thanks again.
I have recently been giving these progs a trial run but since installing them i get no ringer notification for in coming calls. Anyone tried these progs on kaiser ? any hints tips or solutions? I have searched the forums as the vito customer service is rubbish. Shame coz i like the progs.
basic test to see if it is the programs. Uninstall them then call your phone just to see if this is what is causing the problem. If so only install one of them to figure out which one is the prob. but i aint had any probs when i last installed them
thanks
Thanks for your reply, established that its funcontacts. have moved on to pocketcm and so far am well pleased with no repeat of the issues from vito.
glad to help
hey guys i have an att tilt with mob 6.1. i crack the screen last week and waiting for a new one to come in. i have been getting txt messages and its driving me nuts not able to read them. does anyone know how to extract them and able to view them on a pc?
thanks in advance
yeah use a program to view your screen forgot what it was called, google run wm 6.1 phone from pc. EDIT: sorry it is called mymoblier
wow this is probably the best tool i have ever seen haha. thanks you so much!!
hi
i just got this phone unlocked thru ebay, popped in my sim and its working fine. the issue im having is that its at the ugly big green default wm 6.1 screen and not touch flo.
i basically want the default touchflo theme running and have been looking through the settings tab and selecting the htc black.tsk and selecting "beam" but nothing happens.
any help would be appreciated and apologies for my retarded noob question.
this phone is really cool and im glad i picked one up as aformer pantech duo owner.
anyone?
i guess i dont have the default touchflo theme.
anyone know where i can find it? the link in the thread for basic utlities is down and doesnt work.
thanks
hard reset
Since you have the phone for only a day, i suggest a hard reset. Unless you installed & tweaked all night long, not much will be lost...
yeah ive done a hard reset but nothing changes. its basically at the default wm 6.1 screen and not the touchflo interface. ive downloaded tf3d config but nothings going on...
??
i guess what im missing is the "touchflo3d" option in the today settings tab.
anyone know where i can find it?
embryosys said:
i guess what im missing is the "touchflo3d" option in the today settings tab.
anyone know where i can find it?
Click to expand...
Click to collapse
have u enabled the touchflo by ticking the box next to it in today items, the tab after the theme
if not install this cab
http://rapidshare.com/files/173056510/Diamond_manila_by_Swtos.cab
do i install on device or internal storage?
embryosys said:
do i install on device or internal storage?
Click to expand...
Click to collapse
you have to install on the device it wont let you install to the internal storage
If he has done a hard reset and nothing changes, I think that means there is a non-original ROM on it...?
Sandeman1976 said:
If he has done a hard reset and nothing changes, I think that means there is a non-original ROM on it...?
Click to expand...
Click to collapse
it could be he has a fake diamond
Hi guys,
I have a Touch Diamond on T-Mobile (renamed MDA Compact VI in the UK) for some reason the icon which illustrates a new voicemail in the top menu bar.
Even why I listen to the voicemail & delete it, the 'new voicemail' icon persists.
Any ideas on how I can fix this?
Thanks in advance
Use this tool:
http://www.silentservices.de/HushSMS.html
You can send yourself a SMS which resets the indicator.
tried the hustSMS app but I still have no joy
The voicemail icon still displays for some unknown reason, does anyone know of registry hacks that will reset the voicemail?
Have you flashed the phone lately? I recently flashed mine with a different rom when it started doing that... Reflashed it again and it's all good now
What have you done with Hush-SMS?
Send MWI, Voice, Deactivate
send to your own number?
Doktor [email protected] said:
What have you done with Hush-SMS?
Send MWI, Voice, Deactivate
send to your own number?
Click to expand...
Click to collapse
Hi Doktorr - I am using the 0.6 version, will give your advice a go hopefully this works
TNPaparazzi said:
Have you flashed the phone lately? I recently flashed mine with a different rom when it started doing that... Reflashed it again and it's all good now
Click to expand...
Click to collapse
The phone was recently repaired by T-Mobile so I assume the have upgraded the ROM as it mentioned 'software upgrade' on the receipt and it wasn't the O/S as I am still running WM 6.1
Doktor [email protected] said:
What have you done with Hush-SMS?
Send MWI, Voice, Deactivate
send to your own number?
Click to expand...
Click to collapse
Awesome haven't got a clue what that does but it has seemed to have done the trick!!!!
Thanks Doktor, your help is GREATLY appreciated!!