i posted this over at xbox forms but i dont have much faith in them like i know xda has some real top notch people. top notch people that have better things to do but i just figured id try take a look if you got time.
im pretty sure this is a new one and if any one can help me i would be so greatful.
ok first i had live working great for about 3 weeks i didnt change anything and then all the sudden ip always fails.
so makes sense that it was my isp that changed something so i gave them a call they didnt know about anything so after further thinking i figured it was proably not the isp's fault but my conection to my router.
and sure enough my router dosnt even have the 360 in attatched devices (the link light for the port i plug it in to goes crazy just blinks on and off forever) any ways i tried all the normal trouble shooting
power cycled everything on the network
i set the ip manulay
i bypassed the router
reset xbox to factory settings
upgraded router firmware
removed everything from the router but the xbox and soft and hard reset it
still same problem.
heres where it gets real crazy i took the xbox to my friends house who has a 360 reset it to factory settings and pluged it in ip failed same as on my network. his xbox worked just fine on the exact same network. and we went through all the trouble shooting there 2
so i figured the xbox is busted so i called up the support guys and got them to agree with me and there sending me a box to send it to them to get repaired. but tonight i was messing with it and just for kicks i set it up through network sharing on my lap top and it got all the way through the live test. and then trying it again it started failing on the mtu, ip and on live at diffrent times. so im thinking its not actually broken? i have no idea at this point can any one make heads or tails of this before i send the xbox off to get fixed if its not even broken?
my set up is
isp petera wireless (small pos company but it worked before and i think the router to xbox concetion is the culpriate)
they have a little box i dono what it is modem? bridge? any ways that has the ethreanet cable from the wirless radio on top of the house to another ethernet cabel that plugs in to my router
routher is a wgr 614 v6 running the latest firmware (i did try downgrading no dice)
my xbox 360 is wired to the router thers 2 wired computers and a vonage box and one wireless laptop
fb.knight said:
i posted this over at xbox forms but i dont have much faith in them like i know xda has some real top notch people. top notch people that have better things to do but i just figured id try take a look if you got time.
im pretty sure this is a new one and if any one can help me i would be so greatful.
ok first i had live working great for about 3 weeks i didnt change anything and then all the sudden ip always fails.
so makes sense that it was my isp that changed something so i gave them a call they didnt know about anything so after further thinking i figured it was proably not the isp's fault but my conection to my router.
and sure enough my router dosnt even have the 360 in attatched devices (the link light for the port i plug it in to goes crazy just blinks on and off forever) any ways i tried all the normal trouble shooting
power cycled everything on the network
i set the ip manulay
i bypassed the router
reset xbox to factory settings
upgraded router firmware
removed everything from the router but the xbox and soft and hard reset it
still same problem.
heres where it gets real crazy i took the xbox to my friends house who has a 360 reset it to factory settings and pluged it in ip failed same as on my network. his xbox worked just fine on the exact same network. and we went through all the trouble shooting there 2
so i figured the xbox is busted so i called up the support guys and got them to agree with me and there sending me a box to send it to them to get repaired. but tonight i was messing with it and just for kicks i set it up through network sharing on my lap top and it got all the way through the live test. and then trying it again it started failing on the mtu, ip and on live at diffrent times. so im thinking its not actually broken? i have no idea at this point can any one make heads or tails of this before i send the xbox off to get fixed if its not even broken?
my set up is
isp petera wireless (small pos company but it worked before and i think the router to xbox concetion is the culpriate)
they have a little box i dono what it is modem? bridge? any ways that has the ethreanet cable from the wirless radio on top of the house to another ethernet cabel that plugs in to my router
routher is a wgr 614 v6 running the latest firmware (i did try downgrading no dice)
my xbox 360 is wired to the router thers 2 wired computers and a vonage box and one wireless laptop
Click to expand...
Click to collapse
So when you say you've bypassed the router does that mean you've hooked up your 360 directly to your modem?
If that's the case and it still didn't work it looks like something is wrong with the Xbox itself.
Try removing the harddrive that it came with then hook it up to the network/directly to the modem and see if that works.
If that doesn't work then it's the definitely the xbox, as i find the 360 one of the most easiest things to get working on a network.
Also just for kicks if you have it setup to the router try enabling DMZ on the ip that belongs to the xbox and see if that works.
Hopes this helps.
Sorry, double post =/
fb.knight...... im sure I recognise ur name from the xbox forums...
I got my XBOX chipped (softmod) and it was hell getting the wireless to work... in the end it took 2 routers and one wireless bridge... Main router connected to wireless bridge connected to router (set to bridge mode) connected to XBOX. Was running the Evox dashboard but its been so long ive left my XBOX for awhile lol.
Sounds like the netcard in the xbox is hosed, if your box doesn't work with your friends normally working xbox point. I take it you used the working ethernet cable at your friends place, rather than your own, as cables can foo up.
Yeah also don't forget to make sure that you know when to use crossover and non crossover cables (Ethernet - RJ45)
What I am trying to figure out is if I can use my Droid Bionic as the internet source to my router, using the usb tether option.
I am trying to provide a stronger signal to other devices in my house, and to have a private network that will work my printer, satellte tv, etc.
Is this possible?
Not that i know of unless using the wireless tether and using your router to jump the signal.. if tour router supports it.
Sent from my DROID BIONIC using XDA App
Wireless signal repeating is a part of the 802.11n spec. If you have a wireless-N router there should be a firmware option to enable it.
Maybe USB tethering to a PC is the solution. The steps required after that might get complex, but in short your goal is to bridge that connection to your standard ethernet adapter on the PC.
Plug the ethernet from your PC into the router. Put this in place of where your modem typically connects and you should be only a few networking tutorials away from a configuration that works.
USB tethering isn't supported on your router most likely, or any router for that matter. That's why you are going to have to put a PC running Vista+ or Ubuntu 10+ (others may work) for interfacing the connection to a standard ethernet cable.
If a repeater is all you need this won't be useful for you.
Personally, I intend to configure my network to use the 4G connection's superior upload rate, as my ISP at home provides 3Mbps upload while 4G gets 10Mbps.
Using modified firmware on the router will make many things possible. You may want to check out DD-WRT (what I'm currently using) or Tomato.
Do you want both WAN connections (ISP and 4G) to be available to your network?
Sorry if I'm confusing anyone. =)
Sent from my DROID BIONIC using XDA App
Just the 4g.
I currently use the wireless tether option, which provides me 4g internet access for all devices in my house, but I do not have much latitude as far as distance ( the further away the device is from the phone, quality of service declines).
I know that I can USB tether the phone using pda-connect, which works rather well. I just want to use my wireless printer without a lot hassle, and have 1 network that is complete.
Dan
USB.. Not without additional hardware people have already mentioned.
Your router can pick up the WiFi tether from you phone and use it. I have this setup at home with my LinkSys WRT54G. Its called "repeater" mode. I'm not saying it can do it with the stock firmware, but it can thanks to the DD-WRT firmware I loaded onto it. Just google DD-WRT. Many older routers can install it freely. They started charging registrations for some newer routers. That's why I bought a used WRT54G off e-bay for $20 bucks, since I didn't have a router anyways
Sent from my DROID BIONIC using XDA App
I would agree with the previous setup also.
But really, there's no better router than a book and an old dusty PC.
I want to do exactly this.
Currently, I have limited functionality with an old cradlepoint router. The router works fine with PC's and mac's but not the iPad. I narrowed the problem down to the MTU setting which cannot be adjusted on the router or the iPad.
I was thinking about purchasing one of those sapido routers, but I'm not sure if it supports the bionic. The price is right though.
Any update on this thread?
Hey again gang,
So, I did it... I purchased a sapido router from amazon... this one to be exact:
http://www.amazon.com/Sapido-GR-173...OY/ref=sr_1_11?ie=UTF8&qid=1327437644&sr=8-11
I received the router yesterday and connected it to my phone and it works beautifully... better and faster than any other internet service provider we have out here (Time Warner, Local telcom, clearwire, etc...). Just to let all of you know too, I have the 901 ROM installed on my phone, so no more disconnects. I was watching veetle all night and not one hickup.
All I did to get everything to work was go into settings, Wireless & networks, Tetehring & Mobile Hotspot and check USB tethering. The router finds the connection instantly and the green light comes on indicating that we have internet!!
Ethernet and wireless work great to my desktop and laptop. I did try it out with my iPad. The connection to the iPad mostly works, but it does take forever to get some pages. To remedy this, if you do get the router, change the MTU settings from 1492 to 1400 and then everything works beautifully to an iPad.
Best of luck to all of you who decide to use your phone as the main source of internet to your home through the usage of the outstanding sapido router!
Thanks.
Howdy,
Same here. I went with the Sapido RB-1733 from Amazon. Works fine as a regular router, and I can plug my Bionic into the USB port and charge it while its using the tether option. Much better at having a full size router spreading your wifi around the house, besides wired networked stuff.
later...
Purchased gr-1733, but can not get it to work properly. Please tell me the settings you used to get this working. I am using verizon bionic with 4g.
calimansi said:
... I purchased a...
Click to expand...
Click to collapse
I want to tell everybody purchasing routers that support USB built in: your existing network equipment (router) or any old, unused PC can do this for you free.
In fact, there are so many ways to share your 4G throughout your home I won't explain them in-depth unless there are specific questions.
Routers: many routers (Linksys, Buffalo, Belkin, NetGear, ASUS, and many more) contain hardware capable of running open-source firmware. My network contains many flashed routers: Linksys E4200 v1, Linksys E2000, Buffalo WHT-HP-54G, and Belkin F7D7301 v1. These models are all compatible with modified firmware. But keep reading...
ALL YOU NEED IS A USB PORT on your router. The firmwares (assuming your router is compatible) take care of the rest. Be warned, there are ways to brick your routers if you don't read the wiki/forum threads properly. In my opinion, these are much easier to flash than phones.
The DD-WRT supported devices list will let you know if you have a box *already compatible* with DD-WRT. Otherwise, use this reference to shop around for a router with at least:
8 MB flash
1 USB port (you can expand with a powered USB hub)
Support for optware (any Broadcomm router will work!)
This isn't very easy to find but almost any Linksys router has a broadcomm, for example. I can provide reference for any of you that might have questions.
Your router needs writeable space to keep a couple kernel modules that may/may not be built in to the particular DD-WRT flavour/build. Basically, this is something dependent on a per-router basis.
If you have something listed on the supported devices list, I will be happy to provide some reference on whether or not you will be able to do this.
USING A[N OLD] COMPUTER:
Get a linux distribution of your choice (I'll provide links on request)
Enable USB tether on your phone while plugged into a high-speed port.
Configure the connection to route out of your standard Ethernet adapter.
Plug your existing router's WAN/Internet port into the linux computer's Ethernet port.
And from here you troubleshoot. And I can try to help.
I will probably write something up on how to do this on my website once I get things running. For now, I'll subscribe to the thread and take questions here. I'd also like to point out there are many other creative ways somebody can do this. Just keep asking.
Good luck keeping your battery from draining faster than it can charge; I sincerely mean that. WiFi Tether can be killer if using it as a shared connection.
fxmech said:
I want to tell everybody purchasing routers that support USB built in: your existing network equipment (router) or any old, unused PC can do this for you free.
In fact, there are so many ways to share your 4G throughout your home I won't explain them in-depth unless there are specific questions.
Routers: many routers (Linksys, Buffalo, Belkin, NetGear, ASUS, and many more) contain hardware capable of running open-source firmware. My network contains many flashed routers: Linksys E4200 v1, Linksys E2000, Buffalo WHT-HP-54G, and Belkin F7D7301 v1. These models are all compatible with modified firmware. But keep reading...
ALL YOU NEED IS A USB PORT on your router. The firmwares (assuming your router is compatible) take care of the rest. Be warned, there are ways to brick your routers if you don't read the wiki/forum threads properly. In my opinion, these are much easier to flash than phones.
The DD-WRT supported devices list will let you know if you have a box *already compatible* with DD-WRT. Otherwise, use this reference to shop around for a router with at least:
8 MB flash
1 USB port (you can expand with a powered USB hub)
Support for optware (any Broadcomm router will work!)
This isn't very easy to find but almost any Linksys router has a broadcomm, for example. I can provide reference for any of you that might have questions.
Your router needs writeable space to keep a couple kernel modules that may/may not be built in to the particular DD-WRT flavour/build. Basically, this is something dependent on a per-router basis.
If you have something listed on the supported devices list, I will be happy to provide some reference on whether or not you will be able to do this.
USING A[N OLD] COMPUTER:
Get a linux distribution of your choice (I'll provide links on request)
Enable USB tether on your phone while plugged into a high-speed port.
Configure the connection to route out of your standard Ethernet adapter.
Plug your existing router's WAN/Internet port into the linux computer's Ethernet port.
And from here you troubleshoot. And I can try to help.
I will probably write something up on how to do this on my website once I get things running. For now, I'll subscribe to the thread and take questions here. I'd also like to point out there are many other creative ways somebody can do this. Just keep asking.
Click to expand...
Click to collapse
FXMech,
So i've had a Linksys E4200 for some time and after reading your instructions have flashed dd-wrt onto my router. There are a lot of neat features now available but i'm not sure how to get the router to use my phone at an internet source. I'm using a motorola usb data cable and have easy tether set to share my internet and when i plug it into my router i get nothing. any help with this would be appreciated.
fxmech said:
I want to tell everybody purchasing routers that support USB built in: your existing network equipment (router) or any old, unused PC can do this for you free.
In fact, there are so many ways to share your 4G throughout your home I won't explain them in-depth unless there are specific questions.
Routers: many routers (Linksys, Buffalo, Belkin, NetGear, ASUS, and many more) contain hardware capable of running open-source firmware. My network contains many flashed routers: Linksys E4200 v1, Linksys E2000, Buffalo WHT-HP-54G, and Belkin F7D7301 v1. These models are all compatible with modified firmware. But keep reading...
ALL YOU NEED IS A USB PORT on your router. The firmwares (assuming your router is compatible) take care of the rest. Be warned, there are ways to brick your routers if you don't read the wiki/forum threads properly. In my opinion, these are much easier to flash than phones.
The DD-WRT supported devices list will let you know if you have a box *already compatible* with DD-WRT. Otherwise, use this reference to shop around for a router with at least:
8 MB flash
1 USB port (you can expand with a powered USB hub)
Support for optware (any Broadcomm router will work!)
This isn't very easy to find but almost any Linksys router has a broadcomm, for example. I can provide reference for any of you that might have questions.
Your router needs writeable space to keep a couple kernel modules that may/may not be built in to the particular DD-WRT flavour/build. Basically, this is something dependent on a per-router basis.
If you have something listed on the supported devices list, I will be happy to provide some reference on whether or not you will be able to do this.
USING A[N OLD] COMPUTER:
Get a linux distribution of your choice (I'll provide links on request)
Enable USB tether on your phone while plugged into a high-speed port.
Configure the connection to route out of your standard Ethernet adapter.
Plug your existing router's WAN/Internet port into the linux computer's Ethernet port.
And from here you troubleshoot. And I can try to help.
I will probably write something up on how to do this on my website once I get things running. For now, I'll subscribe to the thread and take questions here. I'd also like to point out there are many other creative ways somebody can do this. Just keep asking.
Click to expand...
Click to collapse
Some advice on how to get Android USB tethering to work on dd-wrt would be much appreciated.
Using a Linksys E3000 - DD-WRT Build 19519 installed
JFFS2 Enabled
usbnet.ko, cdc_ether.ko and rndis_host.ko installed
Now stuck at this point.
Thanks in advance
Nice before I even read this I was doing usb teather to my computer. Then I would hook my router up to my computers ethernet port to outers internet port. I have windows 7 so I did network bridge and the router had internet. To bad you need the computer but other than that wifi on router is grwat. Lan is also great. I play xbox live from this setup.
Hehe, I was just going to find some reference on the Ubuntu equivalent of "Connection Sharing," and landed back here forgetting completely about how I've helped motivate this search result.
Here's the deal - I was wrong about a few of my previous posts, I am too lazy to retract and edit out the stupidity,
I have since discovered a fundamental flaw in my logic - "USB tether" is NOT equal to "USB modem" - don't ask me why. However, I can say I know the limitations now.
Bad news: All USB-capable routers supporting TomatoUSB ( http://tomatousb.org ) or DD-WRT ( http://dd-wrt.com/wiki [the main site is useless for regular people, stick to the wiki & forums] ) will not allow this. I have just confirmed in the DD-WRT Kong Mod build for the Linksys E4200 won't do it. To cut to the chase, this build included what I suspected to be the additional modules usually needed. Turns out, those modules are for USB modems, which is a separate type of subscription service, not to mention an additional Dongle to buy. I suppose it's useful for some.
I like to skate by on the cheap, so I won't be able to speak to these (awesome sounding) routers previous people bought. For those of us still wanting to have fancy internet sharing (non-phone-WiFi), you will have your answers revealed. Just not this post. I am not ready to tear down some of my excess equipment and get it rigged up quite yet.
I will be working with Windows 7 and Windows Server 2008 R2 machines at a later date. I anticipate no problems with either, and from my estimation the gist of what's required has already been talked about in this thread.
However, as the resident dork-in-charge of my home office - my specific interest lies in "multiple WAN" on my router. There are 2 reasons to do this. Redundancy or[and?] load-balancing. My new gateway since my last posts in the topic has switched from the E4200 over to an installation of Zentyal 3.0 ( http://zentyal.org ). Zentyal 3.0 is based on Ubuntu Server 12.04 LTS, so I suspect it is possible to tether.
I anticipate a lot of people might stumble here searching The Google. I figure I might as well write this out in a organized, thorough way. More to come as I make room in my brains to type out a relatively coherent tutorial for both OSes.
Sorry guys, 2 people flashed routers per my speculation. If I find any solid info in the future I'll check back.
Sent from my DROID BIONIC using xda app-developers app
Thanks for the update!
Sent from my ADR6425LVW using xda premium
Looks like Android USB tethering to a router is working with the ASUS RT-N66U. I haven't bought the router yet, but I plan to soon.
See here for instructions: http://support.asus.com/Search/KDetail.aspx?SLanguage=en&no=A02827F8-3DB9-CC0E-5F67-85F7D3FB48E4&t=2
Hello.
Since XDA is the only forum I'm loyal to I decided to ask you guys.
I've get my broadband directly from ethernet ports integrated in my walls, and all those ports are connected to a switch. The problem is that I've got a wifi router that I'd like to use so I can connect my laptop and my phone to the network, which works fine if I connect it to one of the ports in my walls, but I also have a XBox 360 connected to one of these ports. And since I always stream music and video from my laptop to my XBox this gives me a problem.
I've temporarily solved this by setting up the router right beside my XBox and hooking the XBox to the router, and it works fine, but I can't connect to the wifi if I leave my livingroom.
Also tried to connect the router inbetween the switch and the cables that goes to the wall ports, but this was totally useless because then I only had acceptable wifi connection in my hallway and my kitchen.
So my question is this, is there anyway to have the router connected to one of these ethernet ports, my computer connected to the router and the XBox connected to another ethernet port and get them to be able to communicate?
EDIT: Disabled DHCP on the router as I've found in a guide, but that was only possible to do on the LAN part of the router, no such setting on the wireless page, so still the same problem.
Sounds a bit compilcated I guess, but I think it should be possible to use this router as some kind of extender for the already existing network.
Regards
Izaac
Tell me, how large is your living room again? -____-
Jk, alright, from my point of view, just place the router at the farthest point between those three gadgets, and buy a wifi extender for the other two. That thing just a couple of bucks anyway. Problem solved. No need for another router.
What is your switch currently connected to for internet access?
If you have it hooked to a modem, then it is probably a 1 port router/modem since you don't have problems drawing an ip on your other items.
You are on the right track. Turning off DHCP is correct. There is no dhcp on the wireless portion so don't look for it. Then you want to set your wireless router with a static ip on your lan side so you can get into it if you need(use something out of the normal range like xxx.xxx.xxx.200). Make sure the static IP is part of your LAN subnet. Those two things turn your wireless router into a switch/wireless access point. From here on out forget about the WAN or Internet port on the router. Use only the LAN ports.
You can now use this wifi router anywhere you want. Place it where you get the best wireless signal.
Wire things up this way wherever you place it:
Connect wall ethernet port to one of the LAN ports. Then connect any other devices needing internet access to the other LAN ports.(Computer, XBOX, whatever...)
Then connect wirelessly with your wireless device.
If you need to modify the router settings, you can browse to xxx.xxx.xxx.200 ( or whatever you set the router static lan ip to) from your computer .
Any devices that need DHCP will draw the address from further upstream from the modem/router.
I live in a two floor appartment with the router on the second floor, most of the building is made of concrete, my router is on the second floor, and i have excellent reception all over the place.
- How long is your cable (from the router to the wall 1 meter? 5? Make it as short as possible)
- Are you using 2.4 GHz or 5 GHz? The most common frequency is 2.4, so if your neighbours are using 2.4, it might disrupt your connection from time to time, so try to change the channel.
- Move the router if your wireless phone or any wireless things are operating on 2.4 GHz nearby. They will disrupt the signal.
Oy..... I forgot to tell him to get Wi-Fi Analytics from the play store to check his signal and find the best channel to use.
Whenever I travel, by biggest grouch is that some of the hotels/motels only provide a hard wired ethernet connection and you cannot (Well, there are ways you can) connect anything other than your laptop with an ethernet port to the internet via the hook-up.
So I ordered this - http://www.amazon.com/TP-LINK-Wirel...UTF8&qid=1343871357&sr=8-2&keywords=TL-MR3040 which I found on buy.com for $40 shipped (Price has gone up now!). I am thinking that I will flash openwrt on it and then use this - http://www.frys.com/product/5923844?site=sr:SEARCH:MAIN_RSLT_PG plugged into the USB port on the router as a wifi network HDD and also as a travel router. The router can be powered by a mini-usb cable hooked up to it and it also has an in-built 2000mAh battery which apparently keeps it juiced for about 5 hrs if you believe the specs. I think you can hook-up an even larger external HDD to the router if you choose to (within power restraints).
I looked thought the forums, but couldn't find anyone who has chosen to go down this route. Has anyone had any success with a similar setup?
Cheers.
Saurabh said:
Whenever I travel, by biggest grouch is that some of the hotels/motels only provide a hard wired ethernet connection and you cannot (Well, there are ways you can) connect anything other than your laptop with an ethernet port to the internet via the hook-up.
So I ordered this - http://www.amazon.com/TP-LINK-Wirel...UTF8&qid=1343871357&sr=8-2&keywords=TL-MR3040 which I found on buy.com for $40 shipped (Price has gone up now!). I am thinking that I will flash openwrt on it and then use this - http://www.frys.com/product/5923844?site=sr:SEARCH:MAIN_RSLT_PG plugged into the USB port on the router as a wifi network HDD and also as a travel router. The router can be powered by a mini-usb cable hooked up to it and it also has an in-built 2000mAh battery which apparently keeps it juiced for about 5 hrs if you believe the specs. I think you can hook-up an even larger external HDD to the router if you choose to (within power restraints).
I looked thought the forums, but couldn't find anyone who has chosen to go down this route. Has anyone had any success with a similar setup?
Cheers.
Click to expand...
Click to collapse
I went with an Asus Travel Router which I reflashed with DD-WRT. This will also do wifi rebroadcasting if you are in a hotel and want to share the wireless connection. It still does AP and router modes. Its a smallish thing and has one issue with the firmware which I have learned to live with. I've used it in Japan, India, Singapore in the past where the hotels had either wireless or wired ethernet so I could share the connection with multiple devices. I think that this is the one I got:
http://www.amazon.com/Asus-Wireless...1343874836&sr=1-2&keywords=asus+travel+router
Never used a portable storage thing like you linked to though.
The wireless sharing was quite nice when I wanted a second laptop or even my android phone to be on the hotel network in my room.
So my PC is connected to my router by Ethernet cable. I can cast my chrome tabs and watch video play smooth with no issues. If i use my laptop that has similar specs as my pc and i connect via wifi, video will play very choppy on my tv. I have even tried it right next to my router to ensure the highest speed. A friend of mine is having the same issue with his computer which is also connected over wifi. Even at the lowest video settings its still choppy. Is this a known issue with trying to cast your tab over wifi or am I missing something?
herculese1 said:
So my PC is connected to my router by Ethernet cable. I can cast my chrome tabs and watch video play smooth with no issues. If i use my laptop that has similar specs as my pc and i connect via wifi, video will play very choppy on my tv. I have even tried it right next to my router to ensure the highest speed. A friend of mine is having the same issue with his computer which is also connected over wifi. Even at the lowest video settings its still choppy. Is this a known issue with trying to cast your tab over wifi or am I missing something?
Click to expand...
Click to collapse
I'm guess that if your router is not an "N" router (802.11n), it's probably having a hard time taking the stream from your laptop then sending it back to the Chromecast (I could be wrong). I have an N rounter and can stream wirelesly from my desktop to the chromecast with little to no stutter.
Also, make sure your chromecast has a good wifi signal. I had to use the included HDMI extender to give mine a little extra boost in signal.
Instead of telling us it's similar specs, what are the actual specs?
lebeauc said:
I'm guess that if your router is not an "N" router (802.11n), it's probably having a hard time taking the stream from your laptop then sending it back to the Chromecast (I could be wrong). I have an N rounter and can stream wirelesly from my desktop to the chromecast with little to no stutter.
Also, make sure your chromecast has a good wifi signal. I had to use the included HDMI extender to give mine a little extra boost in signal.
Click to expand...
Click to collapse
Yes my router is a "N". I have a Cisco E4200V2 which is a pretty good router.
Also, make sure your chromecast has a good wifi signal. I had to use the included HDMI extender to give mine a little extra boost in signal.[/QUOTE]
luega said:
Is your tab configuration a little low? Try another tab one more time,if still choppy,that is not issue of tab but TV.
Click to expand...
Click to collapse
My chromecast doesn't move and it has enough wifi signal to stream when using the ethernet connected computer so it should have the wifi signal. How would it be the tv? It works fine with my desktop.
Wireless connection will always be less reliable than a wired connection. I also doubt that your laptop has the same specs as your desktop in reality. Also, keep in mind that the tab/screen casting feature is still under development and not entirely reliable.
Roberek said:
Wireless connection will always be less reliable than a wired connection. I also doubt that your laptop has the same specs as your desktop in reality. Also, keep in mind that the tab/screen casting feature is still under development and not entirely reliable.
Click to expand...
Click to collapse
Yea i am hoping that when it comes out of beta it will be better over wifi. my pc (6 years old) is has a core 2 quad and it runs perfectly. My friend has a less than 1 year old mac that is quad core and has the issue over wifi. Theirs no way his 1 year old mac is not strong enough to support chromecast. I was ready to say "oh well it doesn't work over wifi smoothly" however it seems some people on here are claiming it should.
herculese1 said:
Yes my router is a "N". I have a Cisco E4200V2 which is a pretty good router.
Click to expand...
Click to collapse
Even with good N router, you still need to setup right
For example use only G and N mix better yet N only
Set router to use 40MHz instead of 20Mhz
Use WPA2 AES for security instead of something else
There are tons of optimization that you can do to the network.
Best way is to hack your router firmware and replace it with DDWrt
There is a large community full of people over at DDWrt that know their wireless stuff.
I have a D link router cheap but hack with DDWrt and I am streaming ok
Sent from my Nexus 7 using Tapatalk 4