Related
Keep in mind that flashing to a nonofficial rom voids your warranty. I am in no way responsible for any issues you may come across when attempting to update your rom. Please keep your questions about this rom in this thread, various users including myself can help you if needed. Please do not pm me with general questions about this rom or the mda, they would be better answered in the thread.
[ File Name ]
T-Mobile_RUU_Wizard_2210401_221_20710_ENG_US.exe
[ ROM Versions ]
IPL: 2.21
SPL: 2.21
OS: 2.21.4.1
GSM: 2.07.10.
[ Description ]
I was going to wait until the AKU 2.2 update was released before cooking a new rom but I've grown impatient. This is the latest os rom available and while it doesn't add anything new feature wise I have changed some other things around for the better. The first thing I did was update the rom install process to automatically attempt to CID-UNLOCK the device and because of this change I have recompiled all of my current roms with the new installer. The second thing I did was go through ALL of the T-Mobile default customizations and cropped out only what was needed; I also cleaned out all of the other cabs used during the customization process. The third thing was creating a new set of registry tweaks to my liking. In the end, on a fresh boot the device has over 40MB of storage space available and over 25mb of memory free.
If you have issues upgrading to the 2.x roms I would advise downgrading to 1.08 first and then try installing 2.x roms again.
[ Extended ROM Contents ]
Certificatin_Disable.cab - Disables certification requirement for cab installers.
Keyboard_English_US.cab - Sets the keyboard language to US English.
Missing Shortcuts.cab - Creates the MMS Messages folder, MIDlet Manager link & Voice Speed Dial link.
Registry_Tweaks_2.0.cab - Disable gprs disconnect button, disable menu animation, disable message sent notification, enable 4-way ie scrolling, enable 802.11g, enable edge icon, enable bluetooth receive, enable caps/dot keyboard indicators, enable cleartype in landscape mode, hide sim contacts, store ie cache on sd card, show time zones tab (network time update.) *Can be uninstalled.
Smart_Dialing_Enable.cab - Enables Smart Dialing.
T-Mobile_Jingle_Ring.cab - Installs and sets the ringtone to T-Jingle. *Can be uninstalled.
T-Mobile_My_E-mail.cab - Installs the T-Mobile My E-mail client. *Can be uninstalled.
T-Mobile_Network_Customizations.cab - T-Mobile GPRS/MMS/IE/OTA settings.
Total_Commander.cab - Advanced file manager and registry editor. *Can be uninstalled.
[ Download ]
You can download the latest rom update along with previous versions and more from my site:
http://xelencin.shackspace.com/wizard
You may also attempt to get them from the xda-dev ftp.
ftp://xda:[email protected]/Uploads/Wizard/Roms/xelencin/
Enjoy!
just in case I would install a english ROM (german ones are usually quite late), could I change the keyboard language?
Lars
so what's so special about this ROM? Did they remove the stupid battery meter from where the date/time should be? I already like 2.17 even though the caller id doesn't show up on my BT headset as it did on my old JAM. Was it worth the upgrade?
Thanks for doing this!! I too have become anxious and would like to upgrade. I have been running the last custom rom you cooked and I have been happy with it thus far. However, as of recently I have been having the random phone resetting issue that has been discussed in various other threads.
Does your current custom rom address that issue, as well as put in the stereo BT fix?
Looking forward to doing the upgrade!!
Upgrade working great so far.
Upgrade!
I have a sickness. I have to apply updates when they come available. It is a strange compulsion. Am I alone? I actually love doing it.
wireless_one said:
Thanks for doing this!! I too have become anxious and would like to upgrade. I have been running the last custom rom you cooked and I have been happy with it thus far. However, as of recently I have been having the random phone resetting issue that has been discussed in various other threads.
Does your current custom rom address that issue, as well as put in the stereo BT fix?
Looking forward to doing the upgrade!!
Click to expand...
Click to collapse
I never had this issue but other users are reporting random bug fixes with this OS version so it may help.
wireless_one said:
Thanks for doing this!! I too have become anxious and would like to upgrade. I have been running the last custom rom you cooked and I have been happy with it thus far. However, as of recently I have been having the random phone resetting issue that has been discussed in various other threads.
Does your current custom rom address that issue, as well as put in the stereo BT fix?
Looking forward to doing the upgrade!!
Click to expand...
Click to collapse
Since I don't own a stereo bluetooth headset I didn't include it yet. It can be found on my site though under notused apps. ZokiA2DP.
xelencin - YOU ARE THE MAN ! ! !
thanks again for all the work ... I have been using your 2.17 ROM since the day I got my T-Mobile MDA flawlessly and I just saw you released a new one - I'm going to install it right now.
keep up the good work ...
Keyboard tweaked
Just installed this on a Qtek 9100 and now the keyboard is no longer mapping to what the silk screen on the key says it should be. Looks like there are some differences in key mappings between the MDA and the 9100. I did try switching it from USA English to UK English and then back to see if it was a Regional Setting error and there was no change. It is not huge differences, but large enough that when you are using the keyboard that you have to hunt around with the "alt" button until you find the right key you are looking for. The hyphen key now maps to the underscore when you press the alt key now- stuff like that. Will definitly want to be careful if you intend to install this on a 9100 or Kjam, I think.
Aegeas
MDA COMPACT SOFTWARE IN ENGLISH
Hi,
I need an english version software for my mda t mobile compact model.The software I have now is:
ROM 1.13.01BGER
ROM DATE 08.18.05
RADIO VERSION 1.12.00
PROTOKOLL VER 1337.42
EXTROM VER 1.13.129 GER
Does anyone know were I can get the update or eng software for it??
regards,
Visitingmalta
Tmobile USA MDA
Hi,
I am new to this and have been reading the msgs on this forum for a few days now. I just got the new MDA they have available in the USA. I just DL :
T-Mobile_RUU_Wizard_2210401_221_20710_ENG_US.exe
I did not install this yet. Still am a bit confused
I know its stated that it will automaticly unlock the CID, but how about the SIM? Will it also unlock the SIM? If so I guess there is nothing else to do, as it will unlock both SIM and CID and then install the new ROM. If not how do I unlock the SIM?
Also another question I have is RING TONES!! tmo only has a handful of ring tones installed. I have some great ring tones that I have on my old phone. I want to transfer them to the MDA, but where would they be saved to on the MDA, and how would I select them?
Thank You in advance for everyones help.
FM
thanks for the new rom. Im a newbie here and i just used the lokowitz to unlock my o2 xda mini s.My question on this new rom is there a special way to run it or should i just copy it onto my mini s and just execute it. I already unlocked it and im using it for tmobile usa, just need to get the tmo rom. please advise.
xelencin, thanks as always.. i downloaded yesterday from here. Have to wait till after plumber comes and goes before i update... :roll:
Adding A2DP AVRCP
Xelecin:
Nice work as usual. I just barely flashed the 2.17. I was using the 2.8 Qtek Test ROM because of the A2DP and AVRCP. Can this be added to your ROM somehow?
Also, is it bad to flash the ROMs a few time?
Thanks in advance.
just dloaded it - and gonna give it a try...
cheers!
:wink:
what is the difference between the rom's you upload to ftp
I have mda vario. I want to upgrade rom but I'm not sure that I know the right rom available. xelencin upload 3 rom to ftp server of xda-developers(ftp://xda-developers.com/Uploads/Wizard/Roms/xelencin/). I don't know what is the difference so I want to learn the correct rom for my mda vario. Thank you
Do the ipl, spl, radio and os all come from O2 UK ROM? (which is the fastest base ROM I have tried).
Many Thanks
Martin
clock and battery still in same place wtf gives?!?
I installed this ROM on my Wizard. The express reason I installed it was because the wi-fi was non-functional for me on the stock T-Mobile firmware. This firmware doesn't seem to work either in the wi-fi department for me. The Wizard detects my wireless network and I'm prompted to enter a key (I use just WEP encryption). I enter the key and it never seems to connect. I have entered the key numerous times to make sure I have it right to no avail. One time it did seem to make a connection with my wireless network but quickly disconnected. There are other devices on my wireless network so I know it's working. My wireless network is just a simple Netgeat 802.11b access point. This is getting really frustrating. I'm running out of idea on what to try and was hoping for some help here.
Hey,
I just flashed my friends MDA with this new firmware with the 2.21 custom and everything went fine except after its done and i rebooted it, i am getting "Data Crashes. Please contact your system provider" and where the start button is, SIMlock is being displayed. Is there something obvious that i have missed or whats going on? I have the MDA too, succesfully installed 2.17 a few weeks ago. Any ideas?
Hi All,
First of all I hope I'm at the right place as this is my first post and I'm new to PDA's worlds. I just bought a HTC Kaiser and tried to install the spb GRPS monitor which was included on the CD. The installation said:
Unable to install application. Please update your device ROM to the required version before trying again.
I had 1.82.707.0 WWE ROM and yesterday I upgraded it to 3.28.405.0 WWE. Both the original and the updated ROM cause the same error when I try to install this program. I thought the PDA come from the manufacturer with the original ROM and the shops doing maximum a language install to the current country. It seems they modified something on the ROM? Can I install somehow this legal software (without cracking it and which will not be a trial version software)?
thanks
Seems quite weird. Try going to SPB's site and downloading the latest version from there, and use the registration number you received to register the software.
There is also a program called BatteryStatus, which is freeware (use google to search you'll find it right away), which does sort of the same thing.
I use to use SPB GRPS Monitor, and never ran into this issue.
Where did you get the CD from that has the software anyway? I am pretty sure HTC wouldn't include a 3rd party software on a CD if you got the phone from them, or if it was new in box. The version you have might be really old and you may need to purchase the latest version anway.
Hope that helps.
go to spb software house website and download the update exe/cab file
try it and let us know if it works or no?
===
apologies i did not read zakhir suggestion we both propose same solution
===
homesnail said:
Hi All,
First of all I hope I'm at the right place as this is my first post and I'm new to PDA's worlds. I just bought a HTC Kaiser and tried to install the spb GRPS monitor which was included on the CD. The installation said:
Unable to install application. Please update your device ROM to the required version before trying again.
I had 1.82.707.0 WWE ROM and yesterday I upgraded it to 3.28.405.0 WWE. Both the original and the updated ROM cause the same error when I try to install this program. I thought the PDA come from the manufacturer with the original ROM and the shops doing maximum a language install to the current country. It seems they modified something on the ROM? Can I install somehow this legal software (without cracking it and which will not be a trial version software)?
thanks
Click to expand...
Click to collapse
First of all thanks for the reply both of you!
zakhir_n said:
Seems quite weird. Try going to SPB's site and downloading the latest version from there, and use the registration number you received to register the software.
There is also a program called BatteryStatus, which is freeware (use google to search you'll find it right away), which does sort of the same thing.
I use to use SPB GRPS Monitor, and never ran into this issue.
Where did you get the CD from that has the software anyway? I am pretty sure HTC wouldn't include a 3rd party software on a CD if you got the phone from them, or if it was new in box. The version you have might be really old and you may need to purchase the latest version anway.
Hope that helps.
Click to expand...
Click to collapse
I got an original new HTC box which included the CD (it seems original HTC as it contains HTC logo copyrights etc... and I think the box original as I got an original HTC varranty card with the device). May be it's an old version and may but I think it will not be a trial SW. I hope as it is a good program But may be not. I can't remember if there is any S/N for the SW and I'm at work atm. I'll check it later.
jahrami:
Thank you for the advice! Actually (in a fast search) I couldn't be fount update for GPRS monitor (as I said I'm at work atm so it was a really fast search). I'll search later again when I will be home. Anyway if I remember correctly somewhere on spb's webpage I read something about upgrade a product (not the GPRS monitor) and the upgrader should it purchase again. (?) Not sure... I'll chack this option later so I just wanted to do some reaction for your post
Thank again the advices!
best regards!
Firstly...I'm with 3 in Australia
Ok, bought a TYTN II off ebay some months ago now from a Hong Kong dealer (that'll learn me) and it seems to not work with the 3G network here in Australia. The phone is always EDGE roaming and whenever it switches to 3G I can't send or receive SMS messages.
I've done some reading around and found that maybe I need to flash the ROM of the phone to an Australian one so that the phone will work properly. I found a thread on Whirlpool and someone there posted a link to this ROM for another user:
www.mediafire.com/?0jt1cwyx61g
Is that the ROM I want? If so, how do I go about flashing my phone with this ROM to make it work?
Can anyone help me??
You're more than likely having issues with the radio that came with the phone. Go to the ROM development forum, read how to unlock, install HardSPL, etc.. and then choose either one of the ROMs that come with a new radio available: NATF, Hyperdragon, Dutty's, etc... or look at one of the threads that show how to install a new radio. I'm not going to make any ROM recommendations, because it's really a matter of personal taste and how the ROM feels to you. For me personally, I've settled on T.i.R vk8 WWE build 19971. And I have radio version 1.58.25.17.
Hey dude,
congrats on the kick-ass new phone.
To help you with your prob, you'll have to signup and login to HTC E-Club for Australia, then download and flash the latest 3 ROM. Its the only way to ensure you have the correct inbuilt three network settings, there was a cab floating around a while back but it didn't include planet3 connectivity - only mobile internet.
look for this one :
HTC TyTN II WM6.1 ROM code for Hutchison ‘3’ Network customers
ROM version: 3.29.861.0
ROM date: 05/15/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
Date: 2008-06-02 Category: ROM Upgrade
I found the ROM development page and the list of radios that relate to the specific ROM's match the ones I already have (note: I already flashed my phone using the one in the link I provided in my first post).
I went and registered for HTC E-Club and went to download the WM6.1 ROM u mentioned Sanchez and when I entered the Serial Number it says the ROM is unsuitable for my phone. Is this because it is NOT an Australian phone?
Would this ROM actually work on my phone and would I be able to get a copy of it from somewhere else?
yeah, its not the actual ROM so much as the stuff Three bundle within that you need.
I'm aka Dr.Nerdlinger on whirlpool, a guy I recommended this to didn't have any problems, seemed to make his US Tilt into an Aussie Three TyTnII.. Havent tried it myself as Im already three branded.
http://www.andrewjstevens.com/2008/06/a-new-att-tytn-ii-tilt-by-htc/
from : whirlpool thread
How did you go Morphio, did that link help out any ?
Umm nah, I've also tried a much newer 3.29.861.0 ROM and that didnt help.
I dont know what to do
Morphio said:
Umm nah, I've also tried a much newer 3.29.861.0 ROM and that didnt help.
I dont know what to do
Click to expand...
Click to collapse
I have the latst official shipped TyTnII 3 ROM (WM 6.1) for Australia.
ie:
TyTN II_AUS Hutch_WM6.1_Upgrade_20080602 (may 2008)
Can't recall where I found it. I am fairly certain it was on this site
If you cannot find it through searchLet me know if you still need it.
Official 3 ROM
Morphio said:
Firstly...I'm with 3 in Australia
Ok, bought a TYTN II off ebay some months ago now from a Hong Kong dealer (that'll learn me) and it seems to not work with the 3G network here in Australia. The phone is always EDGE roaming and whenever it switches to 3G I can't send or receive SMS messages.
I've done some reading around and found that maybe I need to flash the ROM of the phone to an Australian one so that the phone will work properly. I found a thread on Whirlpool and someone there posted a link to this ROM for another user:
www.mediafire.com/?0jt1cwyx61g
Is that the ROM I want? If so, how do I go about flashing my phone with this ROM to make it work?
Click to expand...
Click to collapse
Dude... found it in seconds on google
Link to the ROM download
http://www.megaupload.com/?d=7J3L5LEE
I have flashed this ROM anytime I've had problems with others and it has always worked.
One question though, did Juvs Network Wizard not find 3 for you or it failed in some other way?
Congrats on your purchase and hope get as much out of it as I have
MaDing2000 said:
I have the latst official shipped TyTnII 3 ROM (WM 6.1) for Australia.
ie:
TyTN II_AUS Hutch_WM6.1_Upgrade_20080602 (may 2008)
Can't recall where I found it. I am fairly certain it was on this site
If you cannot find it through searchLet me know if you still need it.
Click to expand...
Click to collapse
This is the same one I used (3.29.861.0) and nothing seems to have changed, still doesnt register on 3G network
Morphio said:
This is the same one I used (3.29.861.0) and nothing seems to have changed, still doesnt register on 3G network
Click to expand...
Click to collapse
Damn! Sorry...
The ROM I posted the link to doesn't ask me for a "serial" when I've flashed it..
I assume you have run the Connection Setup wizard (Settings > Connections > Connection Setup?
Have you tried to manually enter 3's settings?
Perhaps flash the latest Hyperdragon III http://forum.xda-developers.com/showthread.php?t=397121
It has a suitable radio for Australia and I flashed this recently on a TyTn II purchased in Malaysia and all worked fine (as did the ROM I referred to earlier)
Ok but to flash to that (being a cooked ROM) dont I have to do something before I can flash to that? Is it HardSPL I have to install or something like that?
Yes... Unlock and flash a hard spl...
It is quite easy
Excellent directions here:
http://forum.xda-developers.com/showthread.php?t=356895
I am in no way an expert with these devices but I have had no problem that hasn't been quickly resolved.
perhaps unlocking the phone may resolve your problem with flashing the 3 shipped ROM.... (again, no expert here)
Ok seems this is not gonna work. I've done some reading and apparently the board it to blame for my phone not working properly. Since it was an eBay job (but from a company) I can still get warranty but I have to send overseas to HK.
What do people think, I can buy a new TytnII for $659 and when the old one comes back from warranty I can sell it. Would the new one (if I bought from Australian store) work on 3G?
Unless it's faulty hardware, it shouldn't need a return. Don't spend your cash just yet
Try this new official 3.34.721.2 WWE HTC rom, with 1.70 radio.
Download it, plug your activesync cable in, run the exe file you downloaded - after 20 mins or so, you should have the latest ROM, with built in Aus Three Network detection (assuming you have a legal 3 sim-card)
(ps. it may seem like its stalled while flashing, but just give it time)
Report back if successful
Downloaded and installed last night - doesnt seem to have made any difference
sigh...
Morphio said:
Downloaded and installed last night - doesnt seem to have made any difference
sigh...
Click to expand...
Click to collapse
After Flashing a ROM you should always hard reset the device as well. After all this is done, what versions of the following are showing as being installed: ROM, Radio, SPL (can find the last one in the tri colour boot screen - read the wiki if you need to know how to get to the boot screen)? If all of this is showing correctly and you're still having problems then it's probably something like the sim (just any old sim won't do and it needs to be compatible with the phone). You could try another if you have a spare. When you switched it on, after a minute or so did you get a message popping up asking if you wanted to automatically configure the phone for your networks settings?
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
fmervin said:
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
Click to expand...
Click to collapse
Did you actually read anything or did you just start hacking away ? I will cut and paste a few items out of that thread, so that you don't have to actually read it .
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!!
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Thanks for the reply
denco7 said:
Did you actually read anything or did you just start hacking away ?
Click to expand...
Click to collapse
As a matter of fact I did read that more than once.
denco7 said:
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
As you can see I'm a bit of a newbie here, so wasn't too sure if I did need to flash to a new rom. But I did anyway. And the call problems still remain
denco7 said:
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
Click to expand...
Click to collapse
I've been through this link as well and I was contemplating installing the latest version of the HTC WM6.1 ROMS (version 3.34.721.2, radio version 1.70.19.09) available at http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs However I was not sure if this would be ok and (at the risk of sounding extremely dumb) I was not sure what WWE stood for
denco7 said:
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Click to expand...
Click to collapse
I maintained the default that was given by the unlocker for the CID (I think all zeros). Do I have to change this as per the ROM image? I don't mind re-doing this again it's a relief that my device isn't busted
No your phone isn't busted. Go into bootloader and check what it says next to spl, if you followed Mark's steps, it should say 3.29 Hard. If that is what it says ,then you can flash any Kaiser rom you want. If it doesn't then start over again.
WWE stands for World Wide English and those roms are all in English. That rom you picked will be fine, if you do not wish to explore the fine world of custom roms ? Maybe later.
You only have to CID unlock once by following the steps, not at every rom flash.
No sound means wrong radio, 6.0 roms need 6.0 radios and 6.1 roms need 6.1 radios. If the rom has a radio in it already then flash away.
Thanks Denco Flashed the ones I mentioned and it works perfect. Can't believe I actually have a working device Thanks for all your help, really great.
Now to sync my data to my new (second hand) htc and I'm good to go
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
fmervin said:
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Click to expand...
Click to collapse
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Mister B said:
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
Click to expand...
Click to collapse
Wow, thanks for that, I was looking for a valid serial through which I can download from the htc uk site One question I had is do I install the radio which I download from htc? Or do I keep the one I have already flashed? The one I have flashed yesterday seems to be a later version than what I've downloaded from htc
denco7 said:
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Click to expand...
Click to collapse
1. I keep hearing on this forum about Hard SPL, I'm not sure what this is used for or why it is required but I followed the instructions and it seems I had installed JumpSPL1.56-KAIS.exe. Now, since then I had flashed the rom, so do I need to reinstall this again? Is there some other one I should be using? I come across different versions on some threads. Also, how can I check the version of HardSPL I have?
2. When I view the memory (under settings) it shows me Storage and Program. However, I can't seem to see any storage area in file explorer. I know in my old xda 2i, there used to be a separate storage area. The reason is because some of the apps I install are quite bulky for example lexisgoo english dictionary (the dictionary files themselves are about 18mb) and this fills up the main memory. How can I install this in the storage memory? (not storage card since I sometimes swap storage cards)
Sorry lot of questions I know, but I'm a newbie and all help will be greatly appreciated
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Mister B said:
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
Will do, the HK version seems very stable, the only thing that bothers me is the region settings. Anyway, I think I'll give the UK Rom a go and if that works well I'll stick with it
Mister B said:
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
Click to expand...
Click to collapse
I checked the version and this is what it showed:
KAIS130
SPL-3.2.9.Hard
CPLD-8
Click to expand...
Click to collapse
TBH, I don't know what any of that means But do you think the version I have is ok, or do I need to upgrade this to some other version?
Mister B said:
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Click to expand...
Click to collapse
I've attached a screenshot of my memory screen. The bit that puzzles me is that the storage area apparently has a lot more storage but I do not have an option to install all my applications on that area or atleast the bulky ones. I don't think I need a lite one since I do have 112MB free in the storage area which is more than sufficient for all the apps I usually install. Can you advise how I can install apps to the storage area as well?
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Thanks for all your help, it has given me a lot of confidence in these matters. Something I probably wouldn't have attempted
Mister B said:
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
I agree 101% and it appears fewer resources are put into ironing out bugs in the WM 6.1 ROMs than the WM 6.0 ones. I replied to fmervin's post in the ROM forums along these lines.
If all is running OK I would stick with your current HardSPL.
When installing your applications choose the option of installing to "Device"
You could install all your apps into a ROM, this would be cooking a ROM & is a complex process.
I would suggest a backup via Sprite or SPB. I use SPB v2.0 build3065 & it works well for me, preference of backup software is a bit of a Marmite scenario, you either love it or hate it.
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Click to expand...
Click to collapse
You can't do that, it is flash memory. It's not like you can partition the hard drive.
But this is the easiest way to get your Apps and settings back after a flash.
Try this Sashimi Auto installer by a former XDA member. It is a nice little program that installs all your apps after a flash
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
Help Please
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
vicky_crispy said:
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
Click to expand...
Click to collapse
I think you need to decide what it is that you want to accomplish. Unless you cook your own rom, there is no way to add apps to the rom ( so that they will remain after a hard reset) Your rom is wyour phone's base operating system, it contains your OS (WM 6.1 ) and can only be replaced after completely erasing and replacing all files from the previous rom.
If it is a new rom you want, pick a rom that interests you and follow these instructions verbatim .
http://forum.xda-developers.com/showthread.php?t=433835
Your phone will go to the bootloader screen ( three color) and it will disconnect from usb during the process, but be patient until the end. When it says it takes ten minutes, it takes ten minutes. Leave the room if you have to , to keep from getting impatient.
If you just want to keep your OEM WM 6.1 and keep it simple, but change the look of your phone try this,
http://www.htcwiki.com/page/Manila+2D+and+M2D+Themes
This will change the look and feel of your phone with uninstallable .cab files and will not affect the rom or brick your phone by accident.
Hi, if anyone could please help me i would be gratefull, i recently purchased a D2 but its already preloaded with WM6.5 rom version 2.53.405.5 (76952)WWE, But i really wanted WM6.1 as, among other things, i wanted to use the handwriting rec.
does anyone know what stock rom to reload? and where i can get it? sorry to ask such a basic question.
thanks in advance,
http://www.htc.com/europe/SupportDownload.aspx?p_id=249&cat=2&dl_id=613
thanks for that, however it seems to have just bricked the phone
thanks for that, however it seems to have just bricked the phone
it seemed to work, all the correct messages displayed
but......
now all that happens is it turns on, shows the touch diamond2 screen, then resets
it has the following text in red in the lower left hand corner
r 3 . 43. 25 .19
g 61. 20t. 25. 10U
d 1. 39. 47382
does any one have any ideas?
Try to hard reset.
tried that before i posted
and a soft reset, and another hard reset to be sure,
i searched the forum but couldn't find any reference to that type of error either.
any ideas on how to retrieve it from paperweight mode?
Download stock ROM for your region
Unpack it with WinRar or TotalCMD
Rename RUU_signed.nbh to topaimg.nbh
Copy topaimg.nbh on your SD card
Enter bootloader (hold volume down and turn on phone) and follow instructions
edit:I guess for wm 6.1 you need lower version of SSPL
thanks dude, i used the bootloader to reinstall the latest rom from HTC.
Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
my phone is no longer a brick however i am back to square 1 in that i still have wm6.5, and i want 6.1
ive tried to reflash with the older rom fighter7139 suggested
RUU_Topaz_HTC_WWE_1.39.405.3_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship
but it gives me the same rebooting error.
any ideas why wont the older rom work on my phone? or if theres an alternative to that rom ?
thanks
I've loaded hardspl 1.83 and extracted the file RUU_signed.nbh and renamed it to topaimg.nbhand,
i moved it to the SD card, reflashed the phone with the 6.1 rom,
but i get the same error.
any idea on what rom i should use to update from?
or what stock spl i'd need to run this rom's version of 6.1 ?
a thought
maybe i don't even need 6.1, all i want to do is to fix two things -
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
2) add handwriting recognition
- would also be nice to have the taskmanger icon, the battery icon and the original windows start menu back too, but im not dependent on them....
so i guess any rom would do that allows these functions, any help or info on this would be much appriciated
terminalkhaos said:
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
2) add handwriting recognition
Click to expand...
Click to collapse
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=824
thanks for that, however that was the first thing i tried, i saw the download for the handwriting ap just after i got the phone, not knowing it didnt have it when i swapped from my diamond,
the thing is the update only works on certian AP version control builds -
the message on the site is -
Note: AP version control -> The criterion will pass if the Touch Input for Pocket is equal to Version 2.1 (Build1919.1320), or lower.
mines a higer version, which i assumed originally had to do with it being wm6.5 not 6.1,
- i have tried downloading and installing anyway but it wont load.
does anyone know how to get this update to load, or how to change the AP version control back to a lower version ?????
any help would be much appriciated.
if it matters,
i'm running Duttys HG, and ive flashed to hardspl,
i don't mind flashing back to whatever, i just really need the handwriting app
The handwriting SIP is likey hidden.
There is a reg edit to unhide, just search SIP Reg Edit and you should find it.
If I recall it was under the WM general tweaks.
thanks for that, i got the letter and block rec working, but still not the transcriber the reg key shows it should be showing, but i think the actual file may not be there,
fixed after changing the reg, and downloading the update, you then need this transcriber cab
http://forum.xda-developers.com/showpost.php?p=3661845&postcount=47732
result
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
TheNorthSideWhiteGuy said:
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
Click to expand...
Click to collapse
Start here.
Once you unlock your phone, you can flash to anything you want.
6.5 is hands down better than 6.1, there are 6.5.219xx builds that have the drop down start menu.
Thanks Bruce!
For some reason I couldn't find a good Pure forum, so that link helps a lot.