Related
Maybe some of you are already aware of this procedure, maybe not.
Anyway, it worked for me and I decided to share how to do it. Simple.
This procedure should only be used in case you really need enter into a bootloader mode and all other ways to do it has failed! Hold Camera button is one of these I am mentioning.
My Wizard was almost bricked at that time and after I speak with an I-mate technical guy, I got the following:
1. Make sure your i-mate™ K-JAM is not Connected to the PC and remove the dummy card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your i-mate K-JAM to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t use the IrDA or Bluetooth for the Upgrade)
4. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
Hope it helps!
this realy worked for my (ex)bricked dutch tmobile mda vario !!!!
tip: REALY make shure that there is no wcescomm.exe running all the time and realy remove the sd card else is nogo
btw: my wizard is CID locked! and works like a charm
Thanks buddy!
I'm happy that worked for ya!
Take care!
I'm having a problem
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Any ideas?
Hi!
Have you already flashed your device once?
Which ipl/spl do you have?
I had problems over 1.05 ROM in the beggining.
If you stuck on bootloader mode, that's a good signal your device is not bricked.
I'd recommend you to disable activesync as you did and reflash it again! Check also if your device is CID unlocked! Search for a thread in the xda developers root.
Try to upgrade to ipl/spl 2.26 first and later to others you want.
Regarding the old file error...can be related to a missing file called enterbootloader.exe.
Hope it works for ya!
Take care
Ironman273 said:
I'm having a problem
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Any ideas?
Click to expand...
Click to collapse
My device is unlocked as I've been trying different ROMs as of late. I had gone back to the Cingular 2.25 ROM for a couple days to sort some things out and was going to flash Farias AKu 3.3 when my power problems happened. My Current IPL/SPL is 2.25
I've tried flashing the TMobile 2.26 but keep getting connection errors. In fact, I've tried flashing with every ROM I have pdviet 3 and 4, CIngular 2.25, TMobile 2.26 and Custom 1.05. Everything (except twice in the custom) gives me connection errors.
Any other trick I can try?
BTW, I used to live in Sao Paulo years ago...
Edit: OK, so I tried the 2.26 TMobile ROM after I typed this and it worked!! I'm back up but I was having trouble with that ROM beause of some incompatibilities with Cingular. I'll go back to Cingular's ROM and play it safe for now.
I believe part of my problem was I kept trying different updates one after the other. Now that I think back, the 2 times I got the update to almost work was after I turned off the device and turned it on again, which is what I did this time around also.
I had the same problems as mentioned by Ironman before. I followed the steps and with a few slight changes, I managed as well to "unbrick" my wiz. THANKS A LOT for the great step by step manual!!!
Still I wanted to know WHY i bricked my device:
I was trying to upgrade to the underground WM6 ROM. I got the same situation as ironman:
Quote:
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Unquote
I then followed the instructions by epimazzo as written above. I also tried the T-Mobile ROM 2.26 which was not working for me. PANIC!!!! Error messag was that I had the wrong Vendor ID. THerefore no upgrade to TMob 2.26 was possible. I tried it then my original qtek ROM in my language and see it worked!!! This IMHO means that I did not put the device in a proper IPL1.xx and SPL 1.xx status which is required for a clean system in irder to unlock it! So if it is bricked, try your native AKU2 ROM and make sure you unlocked it properly. Maybe you have to run the 1.05 ROM for a second time after the unlocking.
I hope this helps you guys.
Sounds great to hear that!
I had play around with pdaviet3, underground and another ROM just today without any problems at all. I don't think that this is the case. Now you get your device back to normal, try to reflash it again. Hope it works this time!
BTW,...São Paulo is a nice city. Thanks! Let me know if you decide to come here!
Take care
Ironman273 said:
My device is unlocked as I've been trying different ROMs as of late. I had gone back to the Cingular 2.25 ROM for a couple days to sort some things out and was going to flash Farias AKu 3.3 when my power problems happened. My Current IPL/SPL is 2.25
I've tried flashing the TMobile 2.26 but keep getting connection errors. In fact, I've tried flashing with every ROM I have pdviet 3 and 4, CIngular 2.25, TMobile 2.26 and Custom 1.05. Everything (except twice in the custom) gives me connection errors.
Any other trick I can try?
BTW, I used to live in Sao Paulo years ago...
Edit: OK, so I tried the 2.26 TMobile ROM after I typed this and it worked!! I'm back up but I was having trouble with that ROM beause of some incompatibilities with Cingular. I'll go back to Cingular's ROM and play it safe for now.
I believe part of my problem was I kept trying different updates one after the other. Now that I think back, the 2 times I got the update to almost work was after I turned off the device and turned it on again, which is what I did this time around also.
Click to expand...
Click to collapse
It seems you got the idea!
You did the right thing! Sometimes, use the official ROM can solve many issues out there!
Keep walking!
enlite_de said:
I had the same problems as mentioned by Ironman before. I followed the steps and with a few slight changes, I managed as well to "unbrick" my wiz. THANKS A LOT for the great step by step manual!!!
Still I wanted to know WHY i bricked my device:
I was trying to upgrade to the underground WM6 ROM. I got the same situation as ironman:
Quote:
The power went out as I was upgrading my Wizard (Cingular) so now it just turns on at the boatloader screen. I've tried running updates while it was in this screen (it did show the "USB" in the white bar) but most of the time it tells me there is a connection error. Even if I kill Activesync, I notice that when I run the update utility it still runs Activesync. I've tried disabling the USB connection but still get the connection error.
The only time I haven't gotten the connection error was twice it asked me to update but then told me I had the wrong file. This only happened when I tried "upgrading" to 1.05 as I was trying to start again. After it tells me that if I try running it again it gives me the connection error.
Unquote
I then followed the instructions by epimazzo as written above. I also tried the T-Mobile ROM 2.26 which was not working for me. PANIC!!!! Error messag was that I had the wrong Vendor ID. THerefore no upgrade to TMob 2.26 was possible. I tried it then my original qtek ROM in my language and see it worked!!! This IMHO means that I did not put the device in a proper IPL1.xx and SPL 1.xx status which is required for a clean system in irder to unlock it! So if it is bricked, try your native AKU2 ROM and make sure you unlocked it properly. Maybe you have to run the 1.05 ROM for a second time after the unlocking.
I hope this helps you guys.
Click to expand...
Click to collapse
Excellent post. I messed up with my own cooked ROM and could only get the bootloader screen. Tried the tips here - didn't work first time but I pulled the battery from the KJAM to reset it rather than using the reset button and it worked fine.
In my opinion this thread is so helpful to people who brick their device, it should go "sticky". Mods anything you can do about it?
Thanks buddy! I really appreciate!
We survive here over tips like that!
jt_armstrong said:
Excellent post. I messed up with my own cooked ROM and could only get the bootloader screen. Tried the tips here - didn't work first time but I pulled the battery from the KJAM to reset it rather than using the reset button and it worked fine.
Click to expand...
Click to collapse
Help me similar problem
I upgraded Super Rom, then my Wizard run very slow and no signal (no call out and in- no network at all). And Terible thing is PC could not dectect PPC thought Active Sync. I've soft and hard reset but no use.
So I donot know where to start to re install Rom again.
Please help me....
Hi there!
It seems that you just need to enter into the bootloader mode and reflash it again!
I had similar problems and more during my brick "false" stage!
So, just try to follow my steps here and you should be fine! Once you get into bootloader mode, just use any ROM out there to reflash.
Good [email protected]
thaiphong said:
I upgraded Super Rom, then my Wizard run very slow and no signal (no call out and in- no network at all). And Terible thing is PC could not dectect PPC thought Active Sync. I've soft and hard reset but no use.
So I donot know where to start to re install Rom again.
Please help me....
Click to expand...
Click to collapse
I was about to start a EMERGENCY HELP thread, but I *think* this is the right place instead.
The "touch" of my screen went dead today. It got progressively worse over a few hours, starting with difficulty in using the phone dialer, then random incorrect stuff getting triggered by screen taps.
So I hard reset, and got no response on the fifth alignment cross, meaning 1) "Tap on the screen...; 2) center; 3) top left; 4) bottom left; 5) bottom right. In that I could not proceed with alignment, I hard reset again, and now, at the first alignment screen, i.e. "Tap on the screen...", I have no screen response at all.
I called T-mo, and they are being great about sending a replacement ASAP (and getting me a loaner in the meantime).
BUT, I am running Faria+ AKU3.3 V2... so I clearly have to flash back to T-mo 2.26. I can;t figure out how to do it though, as no matter what I do I am stuck at the first alignment screen!!
HELP!! EMERGENCY!!!
(I have three or four days to get this done, so it's not THAT urgent)
Do a search for Broken Screen. Someone (either in Wizard Upgrading or in the Wizard forum) just had a similar issue with a cracked screen. They downloaded something that allowed them to get around the welcome page.
Actually, if you are just trying to flash a new ROM, don't even mess with it. Go straight to the Boot Loader screen (see the first post of this thread). No tapping necessary until the new rom is on (and that will be the Tmobile then so you would be good.
Thanks for the quick reply. Charging up to green now, and then will try to enter bootloader and flash T-mo 2.26. Will report back.
Worked great. Back to T-mo she goes!!!
BootLoader Mode
Excellent thread but you left out one thing.....exactly how to place your device in bootloader mode.
To clear up any misunderstanding because this is very important....this is how you do it:
Perform a soft reset, when the screen goes blank hold the camera button until a multi colored screen comes up .... That's it !!!!!!
When the unit is connected, USB is displayed at the bottom left.
Hi,
I just tried to flash a wm6 rom on my mda vario but at 99% my USB connection stopped so now I only see a red-green-blue screen when I put my mda on...
Does anyone know how to solve this problem?
I'm really desperate right now:S
Read this:
http://forum.xda-developers.com/showthread.php?t=298613
mfrazzz said:
Read this:
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
I tried what he says but it would'nt work....
The flash program cannot find my MDA so i couldn't flash the rom onto it
Do you think my mda is dead?
dantheman2004 said:
I tried what he says but it would'nt work....
The flash program cannot find my MDA so i couldn't flash the rom onto it
Do you think my mda is dead?
Click to expand...
Click to collapse
Ok, so you are on the bootloader... Whats the IPL / SPL showing (exactly what both numbers are). When you plug in the USB cord, do you see USB above the left softkey (if you do, then you can flash). Is your phone a G3 or G4?
What is the exact error you get when you try to flash to your phone?
Have you tried flashing on a different PC? Have you rebooted your PC? Pull out the SD card on your phone before turning it on and flashing it.
In the WIki there is a link to how to flash from your SD card, if all else fails you may have to try that (but that would be a last resort IMO. Also remember that in the current state, your phone will not charge, so you may have to look at getting your battery charged.
mfrazzz said:
Ok, so you are on the bootloader... Whats the IPL / SPL showing (exactly what both numbers are). When you plug in the USB cord, do you see USB above the left softkey (if you do, then you can flash). Is your phone a G3 or G4?
What is the exact error you get when you try to flash to your phone?
Have you tried flashing on a different PC? Have you rebooted your PC? Pull out the SD card on your phone before turning it on and flashing it.
In the WIki there is a link to how to flash from your SD card, if all else fails you may have to try that (but that would be a last resort IMO. Also remember that in the current state, your phone will not charge, so you may have to look at getting your battery charged.
Click to expand...
Click to collapse
The ipl is 1.01 and the SPL is 2.21
I don't get an error when I try to flash the phone, it just won't connect with the pc
dantheman2004 said:
The ipl is 1.01 and the SPL is 2.21
I don't get an error when I try to flash the phone, it just won't connect with the pc
Click to expand...
Click to collapse
1) Your IPL is 1.01. DO NOT flash WM6 on this phone. You have to be running IPL / SPL of 2.xx for WM6 to work or you will have all sorts of problems / weird issues.
2) What do you mean "it just won't connect with the pc"? When you are at the bootloader Activesync will not connect, but if you see USB above the left softkey on your phone then they ARE connected. You just run the RUU and it will flash (trust me).
3) Based on your IPL / SPL you have 3 choices...
a) Try flashing the Button ROM and get that working. Then do the CID Unlock procedure and follow every single step and verify everything is exaclty as that thread says it should be:
http://forum.xda-developers.com/showthread.php?t=285435
b) Flash an official ROM. Once you are done, you may or may not have to do the CID Unlock (hard to say with your current IPL / SPL situation). Personally I'd do the CID unlock again to be safe.
c) Flash the Wizard Love ROM (if a and b don't work). Once you do that, then do a to do the CID Unlock.
If this still doesn't help, then you need to be very precise (no more short answers) with exactly what you are doing and what happens when you do it. Its hard to debug this situation when you don't tell us everything. Also you dd not answer any of my previous questions to you. Please do that.
I am having the same problem with a Cingular 8125. I used buttons 1.05 rom to downgrade from the original 2.25 so that I could use the Lokiwiz 0.2b. When that was complete I had IPL 1.01 and SPL 2.25 (similar to dantheman). After that I ran faria's WM6 RUU. All seemed to install well, but after reboot I got error "\Windows\Autoconfig.exe not found". Searching a forum on HTCWizardWeb someone had the same problem and the advise was that he should have used ShellTool to install the WM6 rom, so I did that. All seemed to install well, but after hard reset (as instructed) the device stays on the IPL/SPL screen with the beer mug. No USB message shows above the left softkey when USB is connected. The only time the PC seems to recognize a USB device connected is when I have uninstalled ActiveSync, rebooted, re-installed activesync and plug the wizard in not powered up. Then the taskbar shows USB device found, then your device is ready. I try the 1.05 rom after is says device is ready and it does not detect the wizard (Error 260:UpdateError, The update util cannot connect...) Noted that when I plug the wizard in powered on to the IPL/SPL screen the USB device connected message does not appear. I can only get to that screen and connectivity seems limited.
At this point when i do a hard reset I get "format failed" error and back to IPL/SPL screen.
mmain said:
I am having the same problem with a Cingular 8125. I used buttons 1.05 rom to downgrade from the original 2.25 so that I could use the Lokiwiz 0.2b. When that was complete I had IPL 1.01 and SPL 2.25 (similar to dantheman). After that I ran faria's WM6 RUU. All seemed to install well, but after reboot I got error "\Windows\Autoconfig.exe not found". Searching a forum on HTCWizardWeb someone had the same problem and the advise was that he should have used ShellTool to install the WM6 rom, so I did that. All seemed to install well, but after hard reset (as instructed) the device stays on the IPL/SPL screen with the beer mug. No USB message shows above the left softkey when USB is connected. The only time the PC seems to recognize a USB device connected is when I have uninstalled ActiveSync, rebooted, re-installed activesync and plug the wizard in not powered up. Then the taskbar shows USB device found, then your device is ready. I try the 1.05 rom after is says device is ready and it does not detect the wizard (Error 260:UpdateError, The update util cannot connect...) Noted that when I plug the wizard in powered on to the IPL/SPL screen the USB device connected message does not appear. I can only get to that screen and connectivity seems limited.
At this point when i do a hard reset I get "format failed" error and back to IPL/SPL screen.
Click to expand...
Click to collapse
Your phone isn't unlocked. How are you hard resetting? And you are sure you have a G3?
--M
You didn't follow all the directions for downgrading. Go back and reread Dr P's sticky, but after you do lokiwiz, you have to flash the button rom again so that both IPL/SPL are 1.xx. Then you HAVE to upgrade to an official 2.xx rom to get IPL/SPL to both be 2.xx.
Only after that is complete can you flash WM6 or other custom roms.
Thanks for your help...
You guys are right, I didn't follow all the directions correctly (or at least wasn't reading the correct set of directions, not sure). But for those that made the same mistake that I did here is how I got it going again.
It actually cost me $50, but it was worth it. I found a post about a fix using an SD card, but the phone had to be CID-unlocked (which apparently was the reason the ROM update I tried failed). And another post told me the only way to unlock my phone from the bootloader screen was to use the www.imei-check.co.uk website to unlock it. It cost $40. After i did the CID unlock via that website go to the forum post -
http://forum.xda-developers.com/showthread.php?t=276963&highlight=splash+screen+freezing
I had to buy a 512mb miniSD at wal-mart last minute and paid $20. Anyway that's what fixed it for me, even though it cost me some money.
I tried to use imei-check to remove my cid lock but have run into problems.
first time I tried it things seemed to go fine but it never passed stage 1 and I was adviced on the computer screen that I should disconnect, reset computer and device and try again.
I tried but now the unlocker would report "communications errors" shortly after it had detected the phone as a Wizard.
Now the phone wouldn't boot (it resets itself after I get the Qtek logo screen with IPL (2.17) SPL (2.17) and OS (2.17.7.1))
I tried flashing with an original rom from Qtek (2.17.7.1) and it went well. I again tried the unlocker. exactly the same as the first time, and as the second time after that.
I again tried flashing with the original rom but now RUU wont put the rom on due to error 294 (invalid vendor ID).
the phone is still CID locked, the original rom wont install and it wont boot...
what the f*** should I do?
edit: after getting it to boot I find that gsm radio is not working, the phone does not charge etc.
Something went VERY wrong during the last flashing.
Edit: There seems to be an issue with my hardware. I dont believe that using imei-check software has anything to do with this. the flash-rom chip seems to be damaged.
Hi there,
never thought this could happen to me [/irony]
I wanted to flash my G4 Wizard (IPL/SPL 3.08) to the last official ROM of T-Mobile Germany (AKU 3.3)
The flash process got stucked at 99% for hours and now my phone only boots to the three-colored bootloader.
No problem I thought, flash again. I plugged the cable and I saw "USB" on the display (there never is "serial" on the display, if this is for interest)
But now: no flashtool would find the phone.
Sometimes when it's found (seldom), it says that's not the right utility. I tried a RUU..._noID.exe I found here but this only got "no Connection"
I tried flashing from Vista, XP and 2000 SP4.
Please help me.
Did you do the HardSPL? If you did, when you tried to put the official ROM from T-Mobile, it tried to put the IPL/SPL from G3 on your phone, since the HardSPL makes your phone a fake G3 (something like that). You have to remove the IPL/SPL info from the official ROM's otherwise you get stuck.
There's hope tho, since you can get to bootloader. You can try the miniSD flashing method, meaning, there's no connection to the computer
See here how: http://forum.xda-developers.com/showthread.php?t=276963&highlight=minisd+flash
Thank you very very much!
it worked!
Glad I could help
Hi!
this is my first post here, so sorry for my bad english or mistakes
i bought a qtek 9100 on ebay, and i'm wondering if it's a brick or not. i received the device 3 days ago. during this time i read through a LOT of threads here, tried a few things and nothing works.
here is some info:
- the phone is a qtek 9100 without branding
- the IPL is now 1.01 (i flashed "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE" successfully)
- the SPL is 2.18 (because of the missing suffix ".0001" i guess it's a G3)
- GSM is 01.12.10
- OS is 1.5.4.2
- when i start the device (without any button pressed) it stops at the splash screen (which was a qtek logo before flashing, and is now this picture with a beer, that says "some things last forever" )
- i can get into bootloader screen (color screen) by holding camera button while starting
- in bootloader screen a small "USB" appears when i connect cable to usb on pc
- when i press communicate and voice buttons (on the sides) while starting, the "Press send to restore factory default" screen appears, but pressing send prints out "Format FAT Partition Format is Failed"
- the device gets recognized by windows ("Mobile Device" appears on my computer)
- ActiveSync 4.5 does not connect to device, not even as guest.
- when i hit "Connect..." in ActiveSync's connection settings, nothing is found
("Allow USB Connections" is ON)
- the device is CID-locked ("FF" state in Mtty 1.42)
- i can't unlock CID, because i can't get "EnableRapi.cab" onto the device without ActiveSync connection
Ok, these are basically the things i know now. The problem is that i never saw any other screen then the "HTC" boot screen, the "Qtek" splash logo (the one with the clouds) before i flashed with custom ruu wwe, after that i see the new splash logo, and i can get into bootloader (color) screen. I never saw any windows mobile running on this device! I could never establish a connection with ActiveSync!
So i hope that someone here on this nice forum can help me get this device to work (WM5 would even be enough right now) or at least give me a hint!
Thanks in advance!
Put the phone in bootloader mode and flash back to the original ROM.
since i bought it in ebay i don't have the original rom of this device.
but i found "233309-qtek9100_2180707_21807109_20710_qtek_ger_ship.exe" through google, which seems to be an original qtek rom (version 2.18). shall i flash this one?
You can find in the Wiki the latest official roms of every brand for our Wizards .-
ok, thanks.
i found one (Qtek GER 2.18.7) and flashed it. the process was successfull, now the IPL/SPL is both 2.18 . But the device still doesn't start and stops at the splash screen (which is now the original qtek splash again). I can still get into bootloader mode and hard reset results in "Format is failed"! No ActiveSync connection either... how should i proceed now?
i basically narrowed it down to these two problems:
- the splash screen freezes
- hard reset error "Format is failed"
( IPL: 2.18, SPL: 2.18 )
can't anybody help please?
i'm freaking out about this
With everything i’ve read the only people who’ve had any success had CID unlocked devices.
ok, i think that too for what i've read so far...
is there any other way of CID unlocking except lokiwiz (can't copy enablerapi.cab without activesync!)?
would this imei-check service that i've read about work in this case?
meanwhile i've also tried something with mtty (r2sd all) but doesn't work -> "didn't get proper security level"
is this also because of the CID lock? i tried to find out the right password to enter in mtty, but found nothing that worked...
does anybody know the correct password?
I couldent CID unluck my 9100 with lokiwiz so i did it 5min ago with Wizard Service Tool (ha to reboot my computer).
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Look up the orignal rom on the wiki, get into bootloader. And flash it back.
Jodda said:
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Click to expand...
Click to collapse
Jodda said:
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Click to expand...
Click to collapse
Hi Friend!
I have the same problem with my Qtek9100!
Any ideas? have you solved your problem?
I have the frustrating beer picture
Please help me.
Very Thanks
Like I sad before
Get into bootloader, flash back the original rom and try again.
mizobuchi said:
Hi Friend!
I have the same problem with my Qtek9100!
Any ideas? have you solved your problem?
I have the frustrating beer picture
Please help me.
Very Thanks
Click to expand...
Click to collapse
I put the original rom.
But... the problem is the same.
when I started the device (without any button pressed) it stops at the splash screen (which has a qtek logo before flashing)
- i can get into bootloader screen (color screen) by holding camera button while starting, I installed the original and others rom who days before works perfectly... Now... this stopped at splash screen
- when I tryed to format.. = "Format FAT Partition Format is Failed"
Any idea?
I have tried this : http://forum.gsmhosting.com/vbb/showthread.php?t=332143
but... without success.
Could you help me, please?
Very Thanks
i'm still stuck with the same problem with hang up on qtek splash screen, too!
i have IPL 2.18 and SPL 2.18 and i can get in boot loader screen and connect with usb. (but no activesync connection!)
formatting doesn't work either.
does anybody have an idea how to solve this?? it's frustrating... i've tried almost every guide here on the forums.
same proplem here with
ipl 2.16
and spl 2.16
I used this to fix this problem
Hi i had the same problem the other week, installed a dodgy app, went to do a hard reset and wouldn't do a hard reset format failed. Tried updating rom everything worked ok until you booted it up. Wouldn't go past second splash sreen. After a few hours of trawling round i found this thread.
http://forum.xda-developers.com/showthread.php?t=276963&highlight=format+is+failed
worked for me. Hope this helps you out.
Problem in connecting to my PC
Hey ,
I just bought a qtek 9100 a day before ... I tried to connect it with my computer.. instead of connecting my battery gets charging well can u plz help me out !
is there any software that i should install in my pc in order to get it connected to my PC...... please help me fast ! Lot of work is pending !
Thanks
Salman
Ok guys, I finally have this SOLVED.
My QTEK 9100 is working fine now!!!
I'm so happy with it right now
Since nothing I tried worked, I went to imei-check.co.uk and got my phone completly unlocked! It only cost me about 11€ and since it works now I have to admit that it was worth it (no advertising). After the unlocking was done I could do the "r2sd all"-method (Tool: MTTY 1.42) using a miniSD card. You can find a good tutorial on this board somewhere. After that everything was just fine...
-> I never saw it working and Hell Yeah: This baby just kicks a$$ !!! (although it's kinda 'oldschool' these days )