I have dragon iv iolite installed. I have tried with at least 5 different versions of transcriber cab, the option shows in the list but doesn't work. When i select it the "keyboard" option does not change. I get no transcriber.
I have spent several hours looking for a solution.
Any help please?
Look at my post here
and see if that works for you
good luck!
yes i tried that. Didn't work.
....
did you try that cab file?
yes, i did....
Related
Anyone know where we can get this browser?
Is it free or commercial?
I hear about it, but cannot find it!
Thanks
Find the information in here
http://www.picsel.com/index.php/solutions/view/C11/
I tried and it is amazing, like i use i-phone. I can move the page with my finger by shifting up and down or lef and right. Good browser, it can handle many thing it can be use in himalaya
I tried to get trail version but no sucess.
Even to buy it is not mention any whare.
I contacted them, waiting 4 reply.!!
PM me if u want the Working version of this Browser..i also have Deepfish (from Microsoft)...
Do picsel browser and/or deepfish work on al websites or should the website builder install server side software or thumbnails created in advance for it to work?
Be carefull may be there is incompatibility with WM6. I found my device became messy My touchscreen like a mirror. My "start" picture is still in the up left corner but when I want to open it, I have to touch at the up right corner. And It is also happened with the other position
I have to do hard reset to overcome this problem
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Hi all,
I am looking for a working Version for my himalaya.
Can somebody help me
xwilli
Rare bol - HERE
Rare bol said:
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Click to expand...
Click to collapse
I had the same issue so I unistalled it, soft reset and re-installed it and wala it starts again!
Rare bol - HERE
Rare bol said:
I use wm6 and have used picsel before, but when I install the same cab now, I get an "initialization failure". Maybe its becvause I've done a hard reset a while ago.. does anyone know the solution, cause its a great browser!!
Click to expand...
Click to collapse
I had the same issue so I unistalled it, went into windows files under program files and deleted the picsel folder, soft reset and re-installed it and wala it starts again!
Hello!
What language is your device?
I had the same problem with a german device. The reason were some entries in th registry that where linked to some where in "program files" instead of "programme" as the folder is called in a german device. Corrected it manualy and everything is fine now.
JueLue
I've gone through multiple Roms, different versions of hyperdragon III, and different versions of PDAcorner. When I try to select a different keyboard, it loads for a second, then goes back to the default. The only keyboards that work are other defaults, such as Block Recognizer, Letter Recognizer, and Symbol Pad.
SOMETIMES PCM keyboard works, but NEVER has any of the diamond keyboards every worked.
I've even tried SIPchange, but the same thing happens. I assume the same has happened to you guys too? did you ever fix it?
thanks!
Is it just me?
How many of you use the Diamond Keyboard, or keyboard other than the default?
default IM
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
The default cab is the ticket...it works when everything else fails. I don't even bother with the other stuff now. If the sip won't stick, I just install that cab and select it. A soft reset later and you are good to go.
Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
I'm not sure what you mean by default im cab for wm5... lol
mikeeey said:
I'm not sure what you mean by default im cab for wm5... lol
Click to expand...
Click to collapse
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
parleyp said:
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
Click to expand...
Click to collapse
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
default im selector instructions
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
.
edit:
sipchange and imSelector did nothing... could someone kindly link me to the 2 keyboards? lol
thanks.
.
edit: (5 seconds later)
PCMkeyboard just quit working again...
Click to expand...
Click to collapse
1. install the default im wm5 cab above
2. install the opal keyboard you want
3. start > programs > im selector > opal keyboard
4. start > settings > personal > input > opal keyboard
5. soft reset
-----
you may need 2 soft reset twice before it cooperates. if you have your phone password protected, the default keyboard you selected will never show until AFTER you enter the password.
only RARELY do i get a glitch now, and a reset usually fixes the problem.
let us know!
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
Click to expand...
Click to collapse
I am in the same boat as you and the only keyboard that I have gotten to work is resco keyboard.....I have same exact problems as you...did you ask SJ about it....
SJ's opal keyboard
im having problems attaching files, but SJ's keyboards can be found here.
apply the default im instructions and a couple of soft resets later, you should be good 2 go.
I played with a Samsung Omnia yesterday, I really liked the keyboard SIP, is it possible to download and get to work on our kaiser's.
not sure...
So, I searched around here, and couldn't find any information on this...
Anyway, I don't like the TouchFlo very much... There's just too much going on at once. I prefer the good old HTC Home... But, when I install the version I have, it doesn't work.
Now I've read on a couple other sites that I might need the VGA version, can anyone confirm this, and if they can, where can I find a copy?
Thanks in advance!
Make sure you disable TouchFLO, and go here.
http://forum.xda-developers.com/showthread.php?t=351553
I just for fun tried that HTC VGA above, and it didn't work too well. Search for HTC home2 and it'll look good on the fuze. That's what I use. HHC works with it, also, although the examples are small.
Edit: finally figured KD8NS' post out above--You don't have to disable touchflo, like just posted, it's TouchFloF3D that you need to disable. Better yet, just use Da_G's ROM, and TF3D won't be there at all!!!
could you link to the file pls?
Fuze Full Qwerty virtual keyboard stuck on numbers
I've installed the NATF's v2.3 rom on my HTC fuze and now my full qwerty virtual keyboard is stuck on numbers. I've tried tapping the ABC button but nothing happens. Does anyone know a fix for this. I've heard there is a cab fix but I'm unable to find that specific cab file
Wrong palce to ask but here you go.
NATF's ROM http://forum.xda-developers.com/attachment.php?attachmentid=135789&d=1228781946
Does anyone know how to enable plugins on second today with 6.5 roms? I have tried several roms and second today installs fineon all of them. I can also select the plugins I want in settings but, whenever I bring up ST, nothing shows and on checking, all of the plugins have been de-selected.
This is with using CHome only. Not the CHome/M2D combinations. I know in 6.1 ST works fine with M2D. I have not tried it as yet with the Combo today roms to see if it works with M2D there, but I suspect not.
Thanks
mcfarlan said:
Does anyone know how to enable plugins on second today with 6.5 roms? I have tried several roms and second today installs fineon all of them. I can also select the plugins I want in settings but, whenever I bring up ST, nothing shows and on checking, all of the plugins have been de-selected.
This is with using CHome only. Not the CHome/M2D combinations. I know in 6.1 ST works fine with M2D. I have not tried it as yet with the Combo today roms to see if it works with M2D there, but I suspect not.
Thanks
Click to expand...
Click to collapse
Mods, please close this thread. I uninstalled Showcase v1 trying to identify the source of another issue and everything works fine now.
I updated td 2 to wm 6.5 and now I can't find the classic little wm keyboard and hand writing areas. I tried installing resco keyboards but I cannot select it. I searched for a solution but I didn't find it. Where is the the problem ?
vitc said:
I updated td 2 to wm 6.5 and now I can't find the classic little wm keyboard and hand writing areas. I tried installing resco keyboards but I cannot select it. I searched for a solution but I didn't find it. Where is the the problem ?
Click to expand...
Click to collapse
Install this cab.
Thank you for your reply. I tried with your file but I received a message like "digital sign not reliable". Searching it seems that it's impossible to install different keyboards! I hope I am wrong
Bye
This cab should take care of your error, install first.
You should be able to instal multiple SIPs.
Thank you again, but it does't work. Resco appears in the list but I can't select it. I am thinking returning to wm 6.1 becouse I need smaller keyboards and hand writing.
Bye and thanks.
You've got something hosed.
I use TouchPal exclusively on 6.5