Related
Hi,
After upgrading my phone to the official 6.1 ROM, I no longer have the HTC home tab under Settings -> Today. I do have the plug-in enabled under 'Items', but am unable to configure anything.
Any ideas?
Thanks.
(searched quite a bit, but could find nothing related)
Kosem said:
Hi,
After upgrading my phone to the official 6.1 ROM, I no longer have the HTC home tab under Settings -> Today. I do have the plug-in enabled under 'Items', but am unable to configure anything.
Any ideas?
Thanks.
(searched quite a bit, but could find nothing related)
Click to expand...
Click to collapse
I have no problems with mine!
Did u flash from the OEM WM6 or a cooked ROM? If you were using a cooked ROM , see if changing back to your OEM SPL will assist.
I suggest u Hard reset and if that still does'nt work reflash with a freshly downloaded OEM ROM.
I have had no problems with my HTC WM 6.1 ROM at all.
The touch screen seems less responsive though.
I have noticed lags in 6.1 both using the on screen and the hardware keyboard. But that's actually nothing compared to an annoying "press OK to continue loading the contents of this page" and some other PIE-based troubles.
Kosem said:
Hi,
After upgrading my phone to the official 6.1 ROM, I no longer have the HTC home tab under Settings -> Today. I do have the plug-in enabled under 'Items', but am unable to configure anything.
Any ideas?
Thanks.
(searched quite a bit, but could find nothing related)
Click to expand...
Click to collapse
That settings tab is a feature of some cooked ROMs. Since you're using the official ROM, you won't see it.
HTC Home version 2.1.1005.722 has the settings/personal/today tab. Good luck finding it as a cab.
fb401 said:
That settings tab is a feature of some cooked ROMs. Since you're using the official ROM, you won't see it.
Click to expand...
Click to collapse
I am not using a cooked ROM. I'm using the official HTC downloadable update for the Kaiser, and I can enable the HTC Home under Settings/Today/Items . It doesn't have (doesn't need) any options. I also see the HTCHomeplug (quite useless, but works if I turn it on). I also have HTC Plus! , much better than the HTChomeplug, don't remember where I downloaded it from, worked on 6.0 and works perfectly under 6.1.
I'm using dutty's April 29th rom and i also dont have the settings, i dont want the weather icon.
There are third-party utilities that let you customize the HTC home. I have used one called HHC, very nice.
I have HTC Home Customizer but it makes my HTC home buttons look older. Currently i have the "bubble" looking onces, they are more transparent and round, if i use HHC it makes it go back to the old blocky buttons.
Kosem said:
Hi,
After upgrading my phone to the official 6.1 ROM, I no longer have the HTC home tab under Settings -> Today. I do have the plug-in enabled under 'Items', but am unable to configure anything.
Any ideas?
Thanks.
(searched quite a bit, but could find nothing related)
Click to expand...
Click to collapse
Just install this http://rapidshare.com/files/70344158/HTC.Home.v2.1.1005.722.Directory.Fix.Only.schen.cab.zip
And you'll have HTC Home tab in Today settings.
Thanks all; Karolis, that worked for me.
Pity it did not solve the real issue - iGO8 not working with HTC home running.
I was hoping disabling the weather/music tabs would help - but no such luck.
I the solution for the annoying "press ok to continue" problem. Using a registry editor, navigate to HKLM\Software\Microsoft\Internet Explorer\Main and make sure BlockStaticActiveX is set to zero.
Hi My friends,
I need help. I changed my rom yesterday official at&t 6.1 Rom and today I changed with HyperDragon III OMNIA WM6.1 WWE ROM Full Version.
I tried to install IGO 8 and IGO2006 on both Roms but it doens't respond.
Any problem on IGO with WM6.1 Roms?
Please help me to fix.
It is running but no positioning
Now I have fixed the problem, I installed Dutty's rom.
Program is running. But now it is not positioning... The weather is a little cloudy, any problem with weather?
Please help me
Igo versions before June 2008 dont work with WM6.1
Duttys Rom is based on WM6.0 thats why iGo8 works on there.
Any iGo v8.0.0.44898 or later will work fine on any New WM6.1 based Rom.
Hope this helped.
mskip said:
Igo versions before June 2008 dont work with WM6.1
Duttys Rom is based on WM6.0 thats why iGo8 works on there.
Any iGo v8.0.0.44898 or later will work fine on any New WM6.1 based Rom.
Hope this helped.
Click to expand...
Click to collapse
I am running at&t's 6.1 sans bloat on my tilt and ig0 8.0.0.49545 july edition and it locks up on me..
any other suggestions or known conflicts? i have manilla2d installed and the random stuff that is needed for it to work right
Dr4g0n75 said:
I am running at&t's 6.1 sans bloat on my tilt and ig0 8.0.0.49545 july edition and it locks up on me..
any other suggestions or known conflicts? i have manilla2d installed and the random stuff that is needed for it to work right
Click to expand...
Click to collapse
Is it getting as far as the menu screen and then freezing? The first time u run it it goes through your contacts list and checks for postcodes to add to its database so give it a few minutes because if u have alot of contacts it will take a while to compile everything. Im running the same configuration and everything is working fine.
Today I have just tried. It is working.
I tried many GPS programs, I think VisualGPSce is very fast for locking. Just for 8-10 sec for locking. GPSgate hasn't locked.
Thanks...
I've got wm6.1 and iGo from jan/febr was working ok,
now i tried to run it after half year and just window's pending symbol appears for half sec and nothing.
Tried to DL new iGo, new install. still not working.
no ROM change/no hard reset meantime.
but gave it up quickly, i don't need it now. just was curious.
here is a solution I found on the net ...
1. Turn off the HTC Home on the Today screen and change Appearance from HTC to WM6.1 (or default)
2. Softreset.
Also turn off AssistedGPS (AGPS) using KaiserTweak. I tried that & it worked for me (& on my wife's Tilt).
I have also found that Microsoft Voice Command can intefere with iGo8 it took me ages to figure that out in the end i had to turn off all the options apart from the phone settings which are the only ones i used anyway and that fixed it.
mskip said:
Is it getting as far as the menu screen and then freezing? The first time u run it it goes through your contacts list and checks for postcodes to add to its database so give it a few minutes because if u have alot of contacts it will take a while to compile everything. Im running the same configuration and everything is working fine.
Click to expand...
Click to collapse
i have gotten to the menu screen and yes it has done the contact thing too
its when i hit the map icon or select a favorite to search... anything that actually has to do with navigating... i can browse teh menus fine... its actually when i try to use the program it locks up
p.s. agps is turned off...
Dr4g0n75 said:
i have gotten to the menu screen and yes it has done the contact thing too
its when i hit the map icon or select a favorite to search... anything that actually has to do with navigating... i can browse teh menus fine... its actually when i try to use the program it locks up
p.s. agps is turned off...
Click to expand...
Click to collapse
Which version are you running?
Dr4g0n75 said:
I am running at&t's 6.1 sans bloat on my tilt and ig0 8.0.0.49545 july edition and it locks up on me..
any other suggestions or known conflicts? i have manilla2d installed and the random stuff that is needed for it to work right
Click to expand...
Click to collapse
do you need any other info?
disabling HTC home worked in my case.
all versions I have work now. just no maps for me still there
tomtom garmin xt and google maps all work fine... just igo isnt working properly... this program is my favorite gps tool any help would be greatly appreciated... thanks guys
I have the Manilla 2d Touchflo installed on my Tilt, & in order to get Igo working I have to restart my Tilt & then open up Igo8 before starting Touchflo. It won't open when Touchflo is open...
DJayRage said:
I have the Manilla 2d Touchflo installed on my Tilt, & in order to get Igo working I have to restart my Tilt & then open up Igo8 before starting Touchflo. It won't open when Touchflo is open...
Click to expand...
Click to collapse
tried that... no go for me
Thats really wierd I have a kaiser with manila2D running with all my other crap installed and igo8 works perfect for me. Just the wait the first time it ran to gather contact info but then no problems at all. Im running 8.0.0.49545 (july 30 3008) with tts voices and the ultra skin v5
Try disabling MSVC if you have it and see if that makes a difference.
I have had the same problem. I ended up getting the Sept 1 update of Igo8 on it works perfect on mine using hyperdragonIII and NATF v3. Im sure you can find it.
DJayRage said:
I have the Manilla 2d Touchflo installed on my Tilt, & in order to get Igo working I have to restart my Tilt & then open up Igo8 before starting Touchflo. It won't open when Touchflo is open...
Click to expand...
Click to collapse
what version of wm are you running? it looks like only hyperdragon III is working...
Does anyone have just a hd or qaurtz contact cab that i can install on the normal tf3d? Ive tried other tf3d versions but otheres have small problems.
Thanks
here you go. Should work fine with most of the TF versions....
thank you very much!
works perfect
Is the attached cab a black Contact page? Is there even a white version? Or doesn't it matter and it will adopt the same sort of colours I have in TF3D
can someone post a photo to see how the contact tab will be, after installing this cab?
Doesn't work on my diamond! I have the 2.03 rom with the first TF3D.
Need to do a hard reset now, because unsinstalling the old TF3D doesn't work
xavierdemon said:
Is the attached cab a black Contact page? Is there even a white version? Or doesn't it matter and it will adopt the same sort of colours I have in TF3D
Click to expand...
Click to collapse
I'm not sure but it has worked with all the rest of the tweaks i used.
equi said:
can someone post a photo to see how the contact tab will be, after installing this cab?
Click to expand...
Click to collapse
Theres one attached is slightly blurry
Rones said:
Doesn't work on my diamond! I have the 2.03 rom with the first TF3D.
Need to do a hard reset now, because unsinstalling the old TF3D doesn't work
Click to expand...
Click to collapse
I also use 2.03 rom and remeber to have net 3.5 installed and turn off tf3d then install.
Thanx for the cab works great
Installed cab after switching off TF3D as advised
Hmmm, didn't work for me - I have Net 3.5 and 1.93 official rom.
my touchflo stop working after this.
it got stock and i dont know what to do :S
mine didnt show anything in the people tab lol funny
phone has gone really slow now!!!!! freezes too!!!
not good
Please remember to follow the steps for it to work and also he said itmight not work on all tf3d but most.
Did not work for me, i have 1.93 ROM stock. I have net 3.5 installed, turned off TF3D, rebooted my device, installed cab, rebooted again, turned on TF3D and now it seems that the People tab is messed up. Everything else works fine but the People Tab, its almost as if it is missing a file.
Lucky for me, I uninstalled the cab and it reverted back to normal.
works fine for me!
stopped TF3D, installed it and started up TF3D again, didnt even need a reboot. Ive got the ATT Fuze/Touch Pro, stock Rom
Can it works on SENSE 2.5?
I have been using SecondToday in order to access my Today plugins in addition to using Rhodium Manila. Recently I discovered Manila Today Page, so I no longer need SecondToday for this. I would, however, like to use Rhodium Manila with the MTP, and somehow also use Titanium (also known as CHome), the standard Windows Mobile 6.5 interface.
I was able to do this previously using TFDetacher, however some functionality of Manila was lost (specifically, BT AVRCP). This solution would offer me the ability to use both interfaces as needed, without losing any functionality (hopefully). I have tried to simply add "Windows Default" as the only item in SecondToday, and, while it does show at startup, I can't get back to it after Manila starts (I have a video of this, but no way to post it).
Does anyone have any suggestions, or know of any other software I can use to accomplish this feat?
I would also like to know the answer to this..
I tried setting up secondToday this weekend with no luck..maybe this is a compatibility issue with wm6.5 and secondToday?
civicvx94 said:
I would also like to know the answer to this..
I tried setting up secondToday this weekend with no luck..maybe this is a compatibility issue with wm6.5 and secondToday?
Click to expand...
Click to collapse
I haven't tried it much, but I pretty sure its compatibility issue between tf3d and windows default. Both of these plugins are designed to deactivate\override any other active plugin when they are chosen which doesn't make for good compatibility. I'm sure somewhere there is a way, just hasnt' been found yet that I know of.
showaco said:
I haven't tried it much, but I pretty sure its compatibility issue between tf3d and windows default. Both of these plugins are designed to deactivate\override any other active plugin when they are chosen which doesn't make for good compatibility. I'm sure somewhere there is a way, just hasnt' been found yet that I know of.
Click to expand...
Click to collapse
Well, at least all my hopes and dreams aren't COMPLETELY crushed, lol.
At one point, I was actually able to use Rhodium Manila, CHome, standard Today, and SPB Mobile Shell 3.0 all at the same time. Actually, I could still do it, but I prefer the HTC Music Player (because I can use BT AVRCP w/it, and it won't become the focused window like WMP), though I like that WMP has a separate volume control.
Well, if there's a way, I'm sure someone will figure it out soon enough. It could even be me, who knows?
I have been trying to figure something like this out myself. I am currently running a stock 6.1, with MS 3.5. I had dcd's 2.27 ROM but was running into a couple problems, mainly DRM doesn't seem to like 6.5 ROMs and battery drain. While I was running 6.5, I never even ran TF3D, but instead just ran Titanium and MS 3.5. However, since I am back with 6.1, am back to running MS 3.5, and TF3d. My setup is running pretty smooth, great data connection and battery life, but I really miss Titanium. If anyone has a cab for it (just the main today screen part), or know of a way I could possibly get that to run that with 6.1, I would be more than willing to play around trying to get it all to work together.
EDIT: Oops, didn't see how old this thread was, sorry >.<
Hi everyone,
Looked for a solution for this around the web, found nothing, perhaps someone here knows:
The new Iconsoft PhonEX 2 version has a new option in the main settings window. It's called "Disable WM Phone (for better perform.)
I'm using the latest NATF WM6.5 ROM and for some reason, this option is grayed out for me. The weird thing is that it has worked a few days ago. I've reflashed a couple of days ago and it's grayed out ever since.
I'm having terrible performance issues with the PhonEX, even though everything else on my Touch Pro works perfectly since upgrading to WM6.5. I think enabling this option should solve the issue, but I need to find out why it's grayed out...
Thank you!
alonroz said:
Hi everyone,
Looked for a solution for this around the web, found nothing, perhaps someone here knows:
The new Iconsoft PhonEX 2 version has a new option in the main settings window. It's called "Disable WM Phone (for better perform.)
I'm using the latest NATF WM6.5 ROM and for some reason, this option is grayed out for me. The weird thing is that it has worked a few days ago. I've reflashed a couple of days ago and it's grayed out ever since.
I'm having terrible performance issues with the PhonEX, even though everything else on my Touch Pro works perfectly since upgrading to WM6.5. I think enabling this option should solve the issue, but I need to find out why it's grayed out...
Thank you!
Click to expand...
Click to collapse
i belive u have to disable the tachi dialer (not sure if NATF ROM is using it) try the tachi dialer disable cab and see if it works than
Thanks a lot, that solved it!
If anyone needs the disabler, it's here at the bottom post:
http://forum.xda-developers.com/showthread.php?t=531175
phonex
iin phonex have you looked at option and then click on the lower taskbar to see if its been ticked ie disable wm phone ! if it is then it would be greyed out !!!!
my issue is when this options is on my bluetooth icon disapears!!!