Can anyone explain how to get sim card internet access in vista? I have a big data plan, but vista doesn't find the connection. What gives?
Caid.
444
I used the internet connection sharing icon in Windows mobile programs folder and left it connected. With that I can browse in vista via the cellular connection.
hmm, I think that my WM doesn't have that. Time to install it, I guess. Anywhere I can grab the cap, do you know?
Caid.
444
Oh yeah! Thank you by the way
Immediately after "Liberating" the Shift via the Modaco method http://www.modaco.com/content/windows-mobile-news/266537/liberate-your-htc-shift/
I had it appear in Programs on the WM side.
nmhusa said:
Immediately after "Liberating" the Shift via the Modaco method http://www.modaco.com/content/windows-mobile-news/266537/liberate-your-htc-shift/
I had it appear in Programs on the WM side.
Click to expand...
Click to collapse
You don't have to connect to Windows Mobile to access Internet from Win Vista. Make sure your Shag control Center has Data connection enabled.
--Ram--
Can't connect to internet in Vista using SIM
Hi, please help.
I've searched and re-searched but I can't find a simple, direct step-by-step instructions manual that shows how to connect to the internet in Vista /W7 using the SIM 3G internet connection on WM.
I've tried internet sharing but no luck. IE on W7 does not recognize the network or at least I can not see the network in the Network and Sharing Centre.
I tried the Shift Control Centre but the only thing I could find is a check box that says " do no connect via a data connection when roaming". Should this be checked or un checked?. Is this the setting that Saiweb is refering to?
Please help.
I was only able to use my sim card on windows 7, after updating my rom. I'm using IOO's rom, and it seems to work well.
After I turned on internet sharing in windows mobile, I went into network and internet center on windows 7 and enabled the one which showed (connected). It was the cellphone connexion.
Good hope to you.
Caid.
444
Related
I have an AT&T Tilt running its original ROM. Is there a way to change the Comm Manager to have a shortcut to Internet Sharing instead of Wireless Modem? I replaced the Comm Manager with a nice touch style one, but it still shows Wireless Modem, so I assume there is somewhere in the registry which tells Windows which one to use by default for this type of task. Does anyone know how to change it?
Bump...It's been awhile since this question was asked and I'm looking for the same thing. Anyone have any ideas yet?
Has anyone found a way?
where is Internet Sharing?
I'd like to give ICS a try instead of using wireless modem.
I have the original ROM. Where should I find Internet Connection Sharing?
I've looked in Start > Programs, and it's not there. If it is not on my phone, can I add it?
Thanks, Bren
xdafile said:
I'd like to give ICS a try instead of using wireless modem.
I have the original ROM. Where should I find Internet Connection Sharing?
I've looked in Start > Programs, and it's not there. If it is not on my phone, can I add it?
Thanks, Bren
Click to expand...
Click to collapse
If its not there, its hidden in your My Device/Windows directory. Its there, you just gotta look. On mine its called Internet Sharing. You can then create a shortcut to it and place it in your programs or start menu.
-Jay
download both AdvancedConfig_v1.1.CAB and AdvancedConfig_v1.0.CAB from http://xda.scan4.us/index.php?sort=date&order=desc&path=Cabs/ and change it from there
Internet Connection Sharing
Thanks for your responses to my post. I did find the app in my Windows folder. It's called IntShrUI.exe. I pasted a shortcut of it into my Start Menu > Programs folder. I haven't been able to figure out how to configure my PC to make it work.
I've been researching in the forums how to configure a PC to use the internet connection of my phone. My PC doesn't have Bluetooth, so I would like to use the USB connection. Most of the postings are how to configure for Bluetooth.
If you know where to find a good explanation, please post the link for me. I'm running Windows XP Pro. I want to use the phone as a back up connection if my cable connection goes down.
I have been successful using my phone with AT&T connection manager on my computer, but I have a problem with that. I have Virtual PC installed on my computer, and the network configuration of Virtual PC doesn't recognize the AT&T Connection Manager as a network card, so my VPC doesn't have access to the internet through my phone.
I'm hoping that with Internet Connection Sharing, the network adapter on my PC will still be used, and access the Internet through the gateway on my phone.
Thanks, Bren
xdafile said:
Thanks for your responses to my post. I did find the app in my Windows folder. It's called IntShrUI.exe. I pasted a shortcut of it into my Start Menu > Programs folder. I haven't been able to figure out how to configure my PC to make it work.
I've been researching in the forums how to configure a PC to use the internet connection of my phone. My PC doesn't have Bluetooth, so I would like to use the USB connection. Most of the postings are how to configure for Bluetooth.
If you know where to find a good explanation, please post the link for me. I'm running Windows XP Pro. I want to use the phone as a back up connection if my cable connection goes down.
I have been successful using my phone with AT&T connection manager on my computer, but I have a problem with that. I have Virtual PC installed on my computer, and the network configuration of Virtual PC doesn't recognize the AT&T Connection Manager as a network card, so my VPC doesn't have access to the internet through my phone.
I'm hoping that with Internet Connection Sharing, the network adapter on my PC will still be used, and access the Internet through the gateway on my phone.
Thanks, Bren
Click to expand...
Click to collapse
There are 2 ways to get it working over USB. Either get the USB modem drivers working, (Which I have never been able to do) or use windows dial up networking. I have connected my Tilt to the AT&T 3G data network with the Windows xp Professional DUN interface. When I get home I'll copy my DUN settings and post them here. Its the same settings I used to use to teather my Motorola V551 for data. I accidentally clicked on DUN a few weeks ago while the Tilt was connected and it worked with the same settings.
Of course, I do have a USB Bluetooth dongle, and getting ICS working is easiest with BT. All you have to do for that is set up a pairing between the 2 devices, and create a BT Personal Area Network.
-Jay
I got it working
Thanks, Jay.
I pieced together information I found about ICS, and I got it working. It works with my Virtual PC because Windows XP puts a Network Connection in the Network Connections folder that I can use to create a Virtual Network in the VPC configurations.
When my phone is connected to my computer via USB, and I open Internet Connection Sharing app on the phone, and then connect to the phone's data network, the Network Connection is automatically created in XP.
I'm not sure what was missing, but when I tried this earlier on my laptop, it didn't successfully automatically install the Generic RDNIS driver that my desktop did successfully install. I'm going to try it again on my laptop. On my laptop, I do have bluetooth, and I will try to get that working instead of USB.
I'm wondering, is there any advantage to using AT&Ts Communication Manager instead of Internet Connection Sharing?
Thanks again for your response.
xdafile said:
Thanks, Jay.
I pieced together information I found about ICS, and I got it working. It works with my Virtual PC because Windows XP puts a Network Connection in the Network Connections folder that I can use to create a Virtual Network in the VPC configurations.
When my phone is connected to my computer via USB, and I open Internet Connection Sharing app on the phone, and then connect to the phone's data network, the Network Connection is automatically created in XP.
I'm not sure what was missing, but when I tried this earlier on my laptop, it didn't successfully automatically install the Generic RDNIS driver that my desktop did successfully install. I'm going to try it again on my laptop. On my laptop, I do have bluetooth, and I will try to get that working instead of USB.
I'm wondering, is there any advantage to using AT&Ts Communication Manager instead of Internet Connection Sharing?
Thanks again for your response.
Click to expand...
Click to collapse
I would think that the advantage is that they then know for a fact you are teathering, and can be exxxxtra sure you are being "properly billed" on an "appropriate" data plan that probably costs at least $60/mo
-Jay
Ok, I found the Cingular / AT&T DUN settings on my computer.
Username: [email protected]
Password: CINGULAR1 (This is case sensitive!!!)
Number to Dial: *99***3#
I also always max out the port speed in the modem configuration so the port doesn't restrict a nice fast HSDPA connection.
This will work for Bluetooth or USB modem connections.
-Jay
aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync
You want to connect to the internet through your home pc via usb/BT?
You might want to try this.. I'm not SURE, just offering a suggestion.. someone can confirm/bunk this either way..
Start|Settings|Connections|Connections
One of the settings there might work for you,
If not.. theres a Little blue Question mark in the top right that actually has some pretty in depth info..
Sorry I couldnt be of more help, but it's a start.
Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.
Monrad said:
Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.
Click to expand...
Click to collapse
Hey m8, i have the same problem and i have tried to follow ur remedy
how ever still i am getting the error "the page cannot be displayed or downloaded because the connection was lost. check the connection and try again later." cannot connect... this is the same with Opera as well.
any having the same problem? is there any one with a fix for this...
sultan said:
any having the same problem? is there any one with a fix for this...
Click to expand...
Click to collapse
if i'm reading right you want to use internet sharing using usb or bluetooth and browse the internet using your PC?? is it?
1.first open setting in your active sync then uncheck allow the usb connection .
2.plug in the usb cable to ur pc and kaiser
3.open the internet sharing in your kaiser end select conection typ usb or bluetooth.
4.connect. (your computer will be installing rds driver automaticcaly)
5.then you'll have a gprs internet trough your pc
note you must have gprs/3g connection available in ur network.
in ur pc in the internet connection option makesure you select direct connection if you use firefox/opera.
Hope this solve your problem.
mikeeey said:
aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync
Click to expand...
Click to collapse
You are wanting to browse IE on your phone using the Activesync usb or BT connection (phone uses PC's internet connection for data) am I correct in thinking that?
I'm not sure what you mean by 'No comm ports available' as your WM device connects via USB?
Sorry if these steps may seem a bit condecending but best to check all.
1, Has your PC got a working internet connection (can you browse IE on your PC) ?
2, Is Activesync actually working (your contacts and mail are sync'ed) ?
3, In connection settings on Activesync (PC) you need 'Allow wireless connection' unchecked (Checked for tethering, PC goes through phone 3G) or phone will try to go through any data connections of its own first.
4, On your WM device under 'Settings' 'Connections' 'USB to PC, check the 'Enable advanced network functionality'
Hope this helps.
I have a similar query, I can use my PC's internet connection from home, but when I connect to my work PC it does not. Now I know this is down to the fact that my Work PC uses a proxy server, but how do I add this info in to my Tytn2.
Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj
fisha21 said:
Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj
Click to expand...
Click to collapse
Your welcome.
Is your device an 'out of the box' HTC device that was not bound to a carrier contract? Some carrier (ie. AT&T Vodaphone) seem to have settings within the ROM (seen in other threads) that tie you in to only using their settings (ie Media.net) and using a proxy that cannot be changed for IE only for GPRS connections.
Anyone got ideas on this one.
Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?
fisha21 said:
Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?
Click to expand...
Click to collapse
Are Orange UK (I am from UK but living abroad now) still wanting to promote their own Internet?
I know only last year a pal of mine said he could not connect his Nokia through his home WiFi because it would not connect via his BT Internet.
Check if you have a proxy connection set up on your GPRS cause ya never know!!!
I can connect to any Wifi network and access webpages without problems. Doesn't seem that there are any restrictions from that point of view. Thanks for the help - guess it's not really a problem not having Internet access via ActiveSync, as it connects to the Wifi network.
i guess i shoulda been more specific.
i wanted to browse the internet on my kaiser, using the active sync connection. however it wasnt working, but now ive re-installed opera and it works with that, not sure if it works with IE yet.
installed Opera and still no hope.
my tytn II is out of the box, not on any contract with an operator. can any one please help me..
I have a notebook, with MS Vista, and with mobile internet (pcmcia card). A tried to connect internet via s730 through mobile device center, but i can't.
I tried with WI-FI: connect to my notebook (ad hoc connection) but i can't use internet.
I tried it with free hotspot and it works.
I don't understand. What can i do?
How are you trying to get online?
You want the s730 do connect to your data network and share that? Or do you want to dial it into the internet (someone got that working on here) or are you connected through your notebook already and want to share that to your s730?
10332007 said:
How are you trying to get online?
You want the s730 do connect to your data network and share that? Or do you want to dial it into the internet (someone got that working on here) or are you connected through your notebook already and want to share that to your s730?
Click to expand...
Click to collapse
Connect with my notebook to the internet, and i want use this network with my s730 (connected to notebook with wi-fi).
is this helping?
http://forum.xda-developers.com/showthread.php?p=1857968#post1857968
I don't know, that was BT connection.
Next question: Mobile Device center why not seeing my device, when i connect to desktop with wi-fi?
bfeco said:
I don't know, that was BT connection.
Next question: Mobile Device center why not seeing my device, when i connect to desktop with wi-fi?
Click to expand...
Click to collapse
I've never been able to get this to work, I don't even know if you can or not.
I am confused.
Do you want your s730 to get on the Internet by connecting to your laptop? Can you just use a usb cable then you can use internet connection through laptop onto phone.
If I understand you correctly your laptop is what is online and you want it to pass the connection onto your phone through the wifi?
If thats the case that you just need to enable ICS on your laptop. It will be under your menu settings, I havnt messed around with vista's network settings so I cannot tell you quite what it looks like. Possibly a check box or a protocol to install. But once you install Internet Connection Sharing your computer should pass the connection out.
bfeco said:
I don't know, that was BT connection.
Next question: Mobile Device center why not seeing my device, when i connect to desktop with wi-fi?
Click to expand...
Click to collapse
I have this working on my machine with my 730. Often you might need to repair the network connection to your phone from the network connection control panel as it sometimes loses it's IP address.
I also found that I needed to do some work in OneCare which I use as an AntiVirus and Firewall as this was blocking access to the Mobile Device Center.
hope this helps
10332007 said:
If thats the case that you just need to enable ICS on your laptop...
Possibly a check box or a protocol to install. But once you install Internet Connection Sharing your computer should pass the connection out.
Click to expand...
Click to collapse
Ok, i found this check box. ICS enabled, but something wrong, because the net don't working... but im tryin' again and again thanx!
I see, that the wi-fi connection is very unstable..loss the connect every minutes..
ps.: at least now it's working with usb..
Hi,
I have Windows Vista and use Windows Mobile Device Center to connect to my TyTN II using USB. Can I use my PC's internet via USB on my PPC?
I was also thinking of turning my PC into WiFi access point so that my Kaiser could connect to it using Wifi
Any ideas
Thanks
As long as you are connected through activesync (sorry WMDC) you can use your PC's internet on your phone. As for your second question you should just get a wireless router if you want wi fi for your kaiser.
Thanks for the quick response.
<insertwittyusernamehere> said:
As long as you are connected through activesync (sorry WMDC) you can use your PC's internet on your phone.
Click to expand...
Click to collapse
But that never seems to work ... it used to work with activesync on Windows XP on my home PC but not on my laptop with Windows Vista.
<insertwittyusernamehere> said:
As for your second question you should just get a wireless router if you want wi fi for your kaiser.
Click to expand...
Click to collapse
Hmmmm... I have been using Wifi on Kaiser without a problem. I was just thinking if I could use my Laptop as access point so that my Kaiser could connect to it over wireless connection... Or any other idea for internet connection sharing (of PC for PPC).
Yasir
anyone? ...
You want to keep your laptop on to use it as a Wifi AP for your kaiser?? Might as well use your laptop already and not ruin your eyes.
Haha... yeah right... actually I was a bit unclear in my statment.. let me try to put it a little differently..
laptop uses internet via LAN cable... I want to share that internet with Kaiser over Wireless ... is it possible... (now that's more of a PC related question that Kaiser, so I have a Kaiser related question too)..
I can't use internet via WMDC on Vista ... what could be the possible reason?
yana209 said:
laptop uses internet via LAN cable... I want to share that internet with Kaiser over Wireless ... is it possible... (now that's more of a PC related question that Kaiser, so I have a Kaiser related question too)..
Click to expand...
Click to collapse
Yes, but for that you need to have your laptop powered on... his point was that if your laptop is on you might as well use the net on it rather than on the obviously much less comfortable phone.
I never tried it, but could be possible by making a ad-hoc wireless network on your laptop, and making your laptop a gateway.
There are settings hidden away that need ticking for sharing the internet connection of the PC, although I thought they defaulted to "on". I'm not sure, I haven't touched a vista machine in months!
Ad-hoc wifi would be the way to go, but good luck getting it working; it's a royal pain in the arse half the time, and for the rest it works like magic. Depends on the devices.
If you're browsing on your phone I hope you've got a copy of Opera Mini; using wifi my phone can nearly outpace my PC at browsing the net.
CrArc said:
There are settings hidden away that need ticking for sharing the internet connection of the PC, although I thought they defaulted to "on". I'm not sure, I haven't touched a vista machine in months!
Ad-hoc wifi would be the way to go, but good luck getting it working; it's a royal pain in the arse half the time, and for the rest it works like magic. Depends on the devices.
If you're browsing on your phone I hope you've got a copy of Opera Mini; using wifi my phone can nearly outpace my PC at browsing the net.
Click to expand...
Click to collapse
Open wmdc
choose mobile device settings >> Connection settings
Set: " this computer is connected to" to either "automatic" or "the internet"
That should do it.
Hi...
It's already set to "automatic" and changing to "internet" didn't work either..
thanks for the suggestion on wifi adhoc..i'll try to find more about it...
Hi,
I was wondering if it is posible to share the Pcs internet with the Kaiser with a Bluetooth set up?
i can not connect to internet in vista mode,anyone could help me!!!???
when i start shareinternet in wm mode,i can find that in vista it can display has connet to modem,but not connect to internet.
And in vista ,there's no signal just like E or G in the Communication Manager.
so i warried about that after unlock de SnapVUE,shift can not connect to internet by sim card.
But in user manaul there is a picture show that in vista singal will display in the right conner of the Communication Manager.
Anyone can help me to solve the problem
thanks a lot~~~~~~~~~~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
PS:i can surf the internet in wm mode by using EDGE with the same sim card.
bqwd36 said:
i can not connect to internet in vista mode,anyone could help me!!!???
when i start shareinternet in wm mode,i can find that in vista it can display has connet to modem,but not connect to internet.
And in vista ,there's no signal just like E or G in the Communication Manager.
so i warried about that after unlock de SnapVUE,shift can not connect to internet by sim card.
But in user manaul there is a picture show that in vista singal will display in the right conner of the Communication Manager.
Anyone can help me to solve the problem
thanks a lot~~~~~~~~~~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
PS:i can surf the internet in wm mode by using EDGE with the same sim card.
Click to expand...
Click to collapse
Liberating SnapVue should not prevent you from being able to connect to the internet. My guess is that you changed the network settings in Vista somehow. WM and Vista are communicating over a USB network connection.
Enable the modem - check your network settings...
i have change the rom,and it works well
thanks