Contact Name for call/text - Touch Pro, Fuze Themes and Apps

I got a strange problem on my MDA Vario IV (HTC touch Pro). have got most of my contact numbers stored without the ISD code ..so typically looks like 07932******. Now when I receive a call it shows the contact name /or pic. But any text message shows only the number and comes up as +447932******. So I changed the contact number to read +447932******. But guess what ? the text display works fine, but the caller ID for incoming call now does not show the contact name..jus the number.. Anybody come across this?
Thanks
B

hi
well my friend, i am also experiencing the same problem you have described...exactly the same way you have described it...hopefully someone will advice us a it more on this issue. i changed roms but that problem is this here.

Related

SMS Inbox shows Contact Numbers instead of Names

Hey all,
I've had my Kaiser a while now, and I love it to pieces. However...
When I open my SMS/MMS inbox, I see all my texts, but instead of showing the Name of the person who sent me a message, it shows there number (i.e +447870111111). This happens if I haven't pre-saved the contact to my phone (Even though the contacts were saved on my simcard). What's more, I thought copying all the contacts from my SIM to my phone would work, but no look. And now, I have 2 sets of all numbers! (one on SIM and one on Phone).
So My questions are:
Is there a way to have my SMS inbox show the contacts name, rather than number?
Is there a way to tell the Kaiser to hide my Sim Contacts, and just display my phone contacts.
I've searched and searched for these issues, but cannot find anything. I'm fairly technical so am usually good with these type of things. But any help would be appreciated.
Cheers
Scott
for the second question, use kaiser-tweak ...
there's a option under [contacts] where you can disable sim-contacts.
the other question i can't help, sry
bye andré
OK Cheers Edi, Anybody for question number one? Surely this issue affects others?
Just to confirm I'm not a jinx, can somebody else who experiences this issu please post?
bump.......
When you store a contact after receiving an SMS, the SMS database is not updated with the contact info and so the Inbox will show with the number alone! But after storing it once, the next SMS will be named with the Contact. This is how it happens in Windows Mobile or the way it handles the messages. The updating is not done in all SMS after a contact is stored as it would slow down the device.
Regards,
Carty..
Thanks for that Carty, now i know I'm not going insane!
It's a shame it has to be that way though... Standard mobile phones usually update themselves when you've saved the number as a contact. Ah well, I still have the best phone ever!
Cheers
Experiencing The Same Problem
Try to include the country code and for sure you'll have the name appear. Problem will be, when that person is calling from the same country... Country code will be omited. So you wouldn't see the name of the person who's calling... and vise versa
Did you find any solution?
Thanks,
Angelo
Audio said:
Hey all,
I've had my Kaiser a while now, and I love it to pieces. However...
When I open my SMS/MMS inbox, I see all my texts, but instead of showing the Name of the person who sent me a message, it shows there number (i.e +447870111111). This happens if I haven't pre-saved the contact to my phone (Even though the contacts were saved on my simcard). What's more, I thought copying all the contacts from my SIM to my phone would work, but no look. And now, I have 2 sets of all numbers! (one on SIM and one on Phone).
So My questions are:
Is there a way to have my SMS inbox show the contacts name, rather than number?
Is there a way to tell the Kaiser to hide my Sim Contacts, and just display my phone contacts.
I've searched and searched for these issues, but cannot find anything. I'm fairly technical so am usually good with these type of things. But any help would be appreciated.
Cheers
Scott
Click to expand...
Click to collapse
Apologies
I'm sorry. I guess my problem is different...
Audio said:
Thanks for that Carty, now i know I'm not going insane!
It's a shame it has to be that way though... Standard mobile phones usually update themselves when you've saved the number as a contact. Ah well, I still have the best phone ever!
Cheers
Click to expand...
Click to collapse
Wow this thread's a blast from the past
TBH I've not noticed the problem again, which could mean one of two things:
1) The problem has now gone after Flashing a WM6.1 ROM, or
2) I haven't had any "New" people send me a text.
Sorry I can't be of more help...
Hi,
I haven't had an issue with numbers showing on an SMS instead of names (as I store my numbers as +447976123456, but I did have a REALLY annoying issue with SMS delivery reports having the number instead of the name.
This would have been fine if I sent one text every now and then , but as a heavy texter it drove me nuts - never knowing whos message had been delivered.
Just in case anyone else is having trouble with this - try the attached file - it lets you change the format of the report you get when your SMS is delivered!
Cheers
Zippyioa

(Solved) HTC Diamond Caller ID - problem with MS Outlook .

I hope that I am missing something very obvious ...
I have a Caller Id Problem with my HTC Diamond… And it’s very annoying.
Diamond has two sources for storing contacts.
SIM card and WM Contact list…
---- Default scenario.
/ Caller ID rule: 8 trailing digits for Call ID match
/ Show Sim Contacts: Yes (Note: If you hide the SIM card contacts via registry change the problem remains the same)
----Problem:
/ If the caller information is not stored on the SIM card, you will always have "Unknown caller ID", despite the fact that his info is stored on the device contact list.
So far I couldn’t solve this with the default settings.
Workaround? Its obvious…
You must have all the important numbers stored on the Sim card.
---- My Scenario.
I always used MS Outlook ( now ver 2003 ) as a default contact list.
In my Outlook contact list I have approximately 300 contacts stored with 500 tel. numbers and all the main tables used. (Firs, Last, Company, mob, home, email etc … )
Those contacts were always my default contacts and I never had any problems to use them or sync them with my PPC or any mobile device before.
SIM card contact list is just was always just a “backup contact list” for me.
I did hide the SIM card contacts via reg. change on my diamond because not doing that will result with doubling my contacts and a total mess ( Sim + Outlook ).
Now I can see and dial only from my device (Outlook) contact list and that problem was solved very fast.
The problem remains with the caller ID.
How do I make the Diamond to lookup up for the numbers stored on the device contact list (Outlook list) and ignore the SIM card contacts?
Thanks,
K
I don't have this issue... however the default number of trailing digits to identify an incomming call is 8
Reduce the number of digits with the advanced config tool by schap
I did that tweak first without any positive results for this problem...
Do you have full numbers (country + area code+ 0044123456789 ) in your contact list or just the mob. number.
Anyway, the info that is shown is from your contact list or the SIM card?
Reg,
K
KraFT_mk said:
I did that tweak first without any positive results for this problem...
Do you have full numbers (country + area code+ 0044123456789 ) in your contact list or just the mob. number.
Anyway, the info that is shown is from your contact list or the SIM card?
Reg,
K
Click to expand...
Click to collapse
10 digit calling in my area (no country codes) but I set the Call ID trailing digits to 6.
The likely hood of getting this repeat on two numbers is pretty slim.
This problem is driving me nuts!
TEST Scenario.
Test to check if you have the same problem:
You must have a second active mobile phone near you. (John Smith).
Example:
Store the contact (John Smith) from your second mobile on your HTC Diamond SIM CARD and on your Diamond contact list with full numbers. (Country + area etc)
a* John Smith @ your SIM CARD 0044123456789
b* Smith, John (Company name) @ Your contact list: 0044123456789
1. Dial from your second mobile device to your HTC Diamond and see if the phone call is identified as John Smith. (It should be ok...)
2. Now delete a* from your SIM CARD on your HTC Diamond.
Now, dial from your second mobile device to your HTC Diamond device and see if you have “Unknown number – 0044123456789 “. If not, than your device is OK …..
If yes, than you have the same problem …
****************
PS. My Caller ID rule: 6 trailing digits for Call ID match
I don't seem to have this issue... maybe your looking at a hard reset or a defective device... however it is possible that others are having the same issue as you... anyone?
Finally, I gave up and I did my first hardware reset and restored everything to factory settings.
Immediately after that I changed only the reg. Caller ID rule: from 8 to 7 trailing digits for Call ID match.
HKCU\Control Panel\Phone\CalIidMatch value:7
Then I did a perfect contact Sync via MS Active Synch with my outlook 2003.
AGAIN, I STILL HAVE THE SAME PROBLEM.
At the moment there are absolutely no numbers stored on my SIM card. It’s totally empty.
All my tel numbers in my Outlook contact list are stored completely:
Example:
Smith, John
Mobile tel: 0038970123456
When John Smith dials, I get this “Unknown Caller" 070123456 !
I am getting desperate here and I hate this stupid problem....
Anyone has any ideas?
I do need your help!
Thanks!
KraFT
Is there any way to get the caller number displayed or transmitted as complete code (inluding country+area+local number)...? Maybe this can fix the problem.
UPDATE:
The problem is finally SOLVED... (And probably it's a Full Moon out tonite .... )
After 3 billon visited pages and one billion number combinations, I tried and replaced the first two digits (exit code) "00" with " + " in every tel number on my contact list.
That solved all my problems …
Go and figure what’s the difference and how using the actual exit code instead of a " + " symbol is messing up the caller ID function.
Ah ... What a day...
KraFT
BTW, the Diamond is great so far...
... first I wanted to write that this might be the issue... but then I thought that I wrote it worked before... so I thought I stick with the missing incoming call information first ...
Concrats! Glad you resolved it
Hi!
I have a similar problem. Whenever I dont use country codes, caller id works well showing names but the sms messages dont show any names (only numbers). In reverse, whenever I use country codes with the + sign, names of callers dont show but the sms messages show the names. It seems that I have to choose between calls and sms
Anyone could help?
It didnt work for me, i tried both with 00 and +,,
BestAlways said:
Hi!
I have a similar problem. Whenever I dont use country codes, caller id works well showing names but the sms messages dont show any names (only numbers). In reverse, whenever I use country codes with the + sign, names of callers dont show but the sms messages show the names. It seems that I have to choose between calls and sms
Anyone could help?
Click to expand...
Click to collapse
Has anyone managed to go around this problem? I'm having the similar problem of SMS messages not showing properly if I don't use the "+ area code" with my contacts.
SMS and Caller ID
How can this be such a huge issue when every bog-standard mobile can sort out caller and SMS ID? Is it a problem with Windows Mobile or HTC? I have spent hours trying to sort this on my Diamond 2. I have 5000 contacts and only want the phone to ring for a handful therefore I need caller ID to work AND know who is texting me. I have tried all the various telephone formats and CALLERID reg settings with no consistent results. At the moment I use the long format +353121234567 as the mobile number which - sometimes- ID's texts and the short local format of the number as "assistants" number which allows Caller ID.
BUt I have one important favourite which refuses to ID SMS although if I click on the contact it recognises and names all the SMS's in the thread.
This is absolutely doing my head in and is such a waste of time.
Do all windows mobile or HTC users have to put up with the same?
SOLVED problem with CALLER ID !!!
I have Diamond 2 and synchonized with outlook and it doesn't matter whether country code is present or not, still I had the problem. After all I accidentaly removed all contacts from Diamond 2, BUT I've had a backup from PPCPimBackup (known small utility) a I restored all the contacts (delete and renew all contacts from backup option) and voila, now the CALLED ID is correct! It's now working!
Pls try it...

my diamond don't recongnize caller ID

Any one having my problem:
My Diamond is not recongnizing phone numbers from my contact or basically the caller ID is not working for some reason. Help - this is really annoying......
Thanks in advance
I didn't receive my diamond yet but from previous experience with some phones it s a matter of recognizing the number of digits in a phone which is country dependent.... like the iphone for exemple ... i had a terrible experience with that ... I had to put for each contact two numbers , one with the country code (+212 .....) and a second without... that way he could recognize the incoming caller ID in both calls and sms....
you should try doing that and tell us if it works!!!
By default it matches on the last 8 digits of the phone number. If phone numbers are less than 8 digits in your country then it may not work properly.
You can use advanced config to edit the number of digits.
It would help to find related issues on this forum, in stead of opening new topics. Every day a full new page (or more) of new topics appear, lots of which are duplicates.
http://forum.xda-developers.com/showthread.php?t=406096
Supplying people with more information would also help to solve the problem easier. Which ROM, what exactly happens and when... etc.

caller id only showing a number then ??

as soon as the call connects the stored name number appears
not a major headache but id like to know who im speaking to b4 i answer it
anyone help on this one cheersy alll ??
If you would like to see picture comes with the contact, or big pic in the caller ID, u can use Inesoft phone (not free) , or other programs...
ideally a name would help ive got that many numbers stored i cant remember them all is there another option to inesoft??
i was kinda hoping it would be say sony ericsson based and show you both names and numbers whilst receiving a call but it does'nt

Contacts bug?

Hi all,
I bought the Touch Diamond2, and have noticed this really annoying problem.
I have a list of contacts (that their names were modified in Outlook 2007, and then transferred to my phone), that whenever they call I can see their number but not the name associated to them (above the number it displays: "(unknown number)"). If I choose to add the number to their name (which is already there - it just asks me to update it), then their name appears if they call. After I add it, it seems like the same exact number - no change at all.
Another thing is, if I enter a number manually that is already stored in my contacts, it doesn't show the name of this contact. If I select the number from my contact page, it does show the name and picture as it should.
Am I the only one experiencing this? Is there a setting in the device i'm missing?
Please help,
Thanks
Hello!
I also have the same problem, because of the indicative of the country, already send an email for the HTC, to try to decide the problem. I am waiting a reply of them.
have a look:
http://forum.xda-developers.com/showthread.php?t=515136
regards

Categories

Resources