hi! as you can see in the title, i want to flash my spl to install a shipped french rom. actually my phone's spl is 1.56.0000 and my rom is a dutch one.
i would like to install the french 6.1
is there any hope to do this without the usb?
nb, i'm running vista on my pc
thanks all of you for your help and sorry for my bas english!
mdbq said:
hi! as you can see in the title, i want to flash my spl to install a shipped french rom. actually my phone's spl is 1.56.0000 and my rom is a dutch one.
i would like to install the french 6.1
is there any hope to do this without the usb?
nb, i'm running vista on my pc
thanks all of you for your help and sorry for my bas english!
Click to expand...
Click to collapse
Correct me if I am wrong but I believe that this file has to be run directly from the phones main memory. You do have options 1. to dl directly to your phone 2. if you have a card reader you can put the file on your SD card and then move it over to your phone.
i took the risk to change my rom without hard spl, but it was the official rom...
now my phone works great and my spl is 3.29.0000 and my CPLD-8
can i load another ROM, an official one but in my motherlanguage? or will i brick my phone?
thanks for your answers!
mdbq said:
i took the risk to change my rom without hard spl, but it was the official rom...
now my phone works great and my spl is 3.29.0000 and my CPLD-8
can i load another ROM, an official one but in my motherlanguage? or will i brick my phone?
thanks for your answers!
Click to expand...
Click to collapse
You should be able to flash a different Language ROM using the GoldCard method. It has been discussed many times on other devices (the newer ones without Hard SPL). It will allow you to flash signed ROMs (not custom ROMs) from other languages. It involves using QMAT to generate a gold card. (I've not tried it so I can't advise on the exact steps.) Sorry.
Ta
Dave
thanks for your reply!!
i'll try it! ut i've bricked my herlad recently so i don't know yet if i'll try, bu, i'm curious... ;-)
cheers!
Related
I had seen the Aserg using he USPL to flash his rom and radio.
GUYs:
DO remember,if you are not Hard-spl,your spl ipl is lower than 4.00.0000,Please don't run JUMPSPL or USPL-BETA3 by pof.
Trust me or you will find lots of bricks on street.
Click to expand...
Click to collapse
If you are HTC 4350 OR VADEFONE OR T-WING.run official ruu update to WM6 frist,to make you IPL SPL upon 4.00.0000
If you think I am joking.keep on..
Click to expand...
Click to collapse
check more here or here
And if ipl/spl: 5.04.0001/5.04.0000 from WM5??? That is possible?
ASerg said:
And if ipl/spl: 5.04.0001/5.04.0000 from WM5??? That is possible?
Click to expand...
Click to collapse
that's ok. nothing at all.
safely.
Now I shall check up
I confirm. Thanks!
ASerg said:
I confirm. Thanks!
Click to expand...
Click to collapse
please warn people in your post.
and why don't you use jspl.it's quick and safely.uspl too slow but simply use
i want to be able to flash my rom so that i could install the HTC RUU on my tmo wing ( it's actually a herald but i was stupid enough to put in the TMO RUU)
Do you know any way i could do that with instructions available?
Also, once i do it, would the phone become unlocked again or still locked Just wondering.
umchriswho said:
i want to be able to flash my rom so that i could install the HTC RUU on my tmo wing ( it's actually a herald but i was stupid enough to put in the TMO RUU)
Do you know any way i could do that with instructions available?
Also, once i do it, would the phone become unlocked again or still locked Just wondering.
Click to expand...
Click to collapse
The HARD-SPL is a little more dangerous than the USPL... I can help you find ways to get any ROM you want on that phone easily enough, but UNLOCKING it again is the hard part. There's not 100% sure fire SAFE way of doing it.
welll, i just installed the hard-spl on my device and it went through
there's just one thing that gets me...
what's the difference with this hard-spl and HTC?
is the only difference is that the boot screen is different or are there more features?
For now, I just need a comparision of what the hard-spl has from the HTC one.
The Hard-SPL is a customer SPL. It's permanent, too. You will have to create your own customized RUU from now on, one that lacks the SPL. You can't flash RUU's that contain SPL because the SPL is now write protected. It's convinient, though, because now you can't accidently screw it up. (It's safe once you have it IN your device. Too many people brick their phones trying to get it in there in the first place, though.)
So now i won't be able to put in the HTC RUU anymore?
All right, sorry i'm being so stupid, but here's another question...
You said that i now have to make my own customized RUUs?
What do you mean by that?
If you don't mind, you could send me a pm, I don't want to spam this thread with my stupidity.
Now you can flash ANY rom you want.
ALL cooked ROms - really all - without the chance of bricking = your device is SAFE.
IF you respect this little thing
every RUU Rom Update Utility
contains:
1. Enterbootloader.exe
2. Rapitool.exe
3. RomupgradeUtility.exe (the one you start)
4. RUUGetinfo.exe
5. RUU ressource.dll
6. RUU_signed.nbh (that is the custom system OS - you can put every HERALD .nbh here postet in touchIT3 for example)
7. SPL.nbh ---- !!!!!!!! delete this allways!!!!!!!!! ------ (it is in all official RUU but delete it)
now you can flash with an official update tool all custom roms for you herald.
But don´t use wing roms - the keyboadmapping is different.
There are good herald roms, too.
Good luck
umchriswho said:
So now i won't be able to put in the HTC RUU anymore?
All right, sorry i'm being so stupid, but here's another question...
You said that i now have to make my own customized RUUs?
What do you mean by that?
If you don't mind, you could send me a pm, I don't want to spam this thread with my stupidity.
Click to expand...
Click to collapse
Dear Maestro Help upgrade to WM6
Dear Canonyang,
Have the following
Dopod C800 WM5 5.1.422 (Build 15633.3.2.0)
Can you please help me upgrade to WM 6
Gratefully
neelanjoo
canonyang_China said:
please warn people in your post.
and why don't you use jspl.it's quick and safely.uspl too slow but simply use
Click to expand...
Click to collapse
My brother bought for me X1 from Leipzig Germany its factory unlocked and has no branding. But it has windows in German.
My question is can I flash english rom vithout any spl unlocking?
and if yes please give me link which english wwe rom can flashed to my device.
I have experience with Elfin and Elfin was bought from china has chinese wm so I used wwe elfin rom and directly without unlocking it flashed.
So is there any chance that I can have englisj X1 rom original not cooked that can drieclty flash to my device?
You will need to flash HardSPL for X1 first (it's sticky on this forum), then you can flash UK rom. Remember that German version of X1 have qwertz keyboard, so if you will flash UK rom then some keys will have another function then they show.
But after that hardspl when I will change to UK can I go directly SEUS to recoknized my phone as UK phone and update via website? So if somebody have experience flashed German rom to UK generic and after that tested SEUS service please share here the results.
Can somebody give me link for UK Generic non customized rom I found on forum but it says at then begingn of link Customized UK I need original genereic UK rom please help me to find also if you tell me how to dump my rom I can dume German Generic rom for share with forum
When you've done HARDSPL you can use the SE update service
Thannks for info Fards
One more question I have conected with SPL things.
I have experience workign with HTC TOUCH XL USPL tool and flashed lot of roms with that tool but in HTC any time you need to flash another rom you should use USPL tool and then at some stage start RUU and flash your rom.
also if you stack in bootloader or in other stage you can always recover your phone using RUU and your device default rom.
Is this possible in X1?
Lets say I have German Genereic rom deivce I want to flash to UK rom direclty without any SPL tools and stucked in some stage with error. Can I use Kovski RUU and German Genereic rom (which is the my device's defalut rom) and recover from that stage?
Thanks in advance
ITMASTER said:
Thannks for info Fards
One more question I have conected with SPL things.
I have experience workign with HTC TOUCH XL USPL tool and flashed lot of roms with that tool but in HTC any time you need to flash another rom you should use USPL tool and then at some stage start RUU and flash your rom.
also if you stack in bootloader or in other stage you can always recover your phone using RUU and your device default rom.
Is this possible in X1?
Lets say I have German Genereic rom deivce I want to flash to UK rom direclty without any SPL tools and stucked in some stage with error. Can I use Kovski RUU and German Genereic rom (which is the my device's defalut rom) and recover from that stage?
Thanks in advance
Click to expand...
Click to collapse
You should be able to yes, obviously make sure you've done hardspl before going to the UK rom.
The SEUS uses RUU to flash the rom.
If you have your own rom (such as stock german one) then it's much much easier to flash from the SD card. Jack did a decent walkthrough of that.. but just rename the file to KOVSimg.nbh and go into bootloader (volume down and reset at the same time).
is USPL available for the X1?? or its just the HD?
USPL is not available for Xperia... would be cool if it is made available at some point, though I've already flashed HardSPL!
Hello guys
I have been dying to flash my blackstone for a while now but i was scared of damaging it.
Anyway i went through all the tutorials (tyvm to everyone) and i think i am finally ready.
I just want to check a few things before i go for it.
Please correct me if i am doing something wrong thanks in advance.
My spl is 1.14.0000.
so i need to upgrade it to official spl 1.54.
Question: 1. I want to use USPL i understand that dosnt void my warranty right?
I downloaded all files in cRaCKwHoRe's TUT
in order to do that.
I have also updated my usb drivers.
I have a copy of Duttys' 3.9 Rom.
Questions: 2. If i upgrade to spl 1.54 from that post i wouldent need to reswitch it ever to 1.14 for warranty purposes right?
3. Are their any risks at all of bricking the device while flashing?
4. I tried downloading the official rom upgrade why did i get a ''this rom is not for your device message"?
5. I read their is a way of flashing from the sd card i understand i need a BLACIMG.NBH file where can i get it is there a Tutorial for this?
6. My phone is Branded should i save/backup the stock branded rom just in case?
Sorry for the long post
Thank you.
Jay
j1978 said:
Hello guys
I have been dying to flash my blackstone for a while now but i was scared of damaging it.
Anyway i went through all the tutorials (tyvm to everyone) and i think i am finally ready.
I just want to check a few things before i go for it.
Please correct me if i am doing something wrong thanks in advance.
My spl is 1.14.0000.
so i need to upgrade it to official spl 1.54.
Question: 1. I want to use USPL i understand that dosnt void my warranty right?
I downloaded all files in cRaCKwHoRe's TUT
in order to do that.
I have also updated my usb drivers.
I have a copy of Duttys' 3.9 Rom.
Questions: 2. If i upgrade to spl 1.54 from that post i wouldent need to reswitch it ever to 1.14 for warranty purposes right?
3. Are their any risks at all of bricking the device while flashing?
4. I tried downloading the official rom upgrade why did i get a ''this rom is not for your device message"?
5. I read their is a way of flashing from the sd card i understand i need a BLACIMG.NBH file where can i get it is there a Tutorial for this?
6. My phone is Branded should i save/backup the stock branded rom just in case?
Sorry for the long post
Thank you.
Jay
Click to expand...
Click to collapse
post this in the tutorial thread to get a answer..
Hello, new to 'hacking' the WP7 but i want to flash a custom dev unlocked ROM to my phone, but i want to make sure i dont use the wrong ROM, so i was hoping someone could point me in the right direction?
I have a HD7 (T Mobile unlocked, US model, i'm in the UK if that makes a difference, also using o2)
It's currently running the official mango by the disconnect internet trick in zune.
Thanks in advance!
JeffaCakes said:
Hello, new to 'hacking' the WP7 but i want to flash a custom dev unlocked ROM to my phone, but i want to make sure i dont use the wrong ROM, so i was hoping someone could point me in the right direction?
I have a HD7 (T Mobile unlocked, US model, i'm in the UK if that makes a difference, also using o2)
It's currently running the official mango by the disconnect internet trick in zune.
Thanks in advance!
Click to expand...
Click to collapse
any Schubert ROM will flash successfully to your HD7 with RSPL or HSPL installed.
with that said...
is either RSPL or HSPL installed?
if not... you will need to get that. DFT's RSPL/HSPL.
and here is a little how-to if you have the wrong SPL. see steps 2 and 8.
after that,
any ROM in the HD7 WP7 Development thread should flash fine.
sh4d0w86.
sh4d0w86 said:
any Schubert ROM will flash successfully to your HD7 with RSPL or HSPL installed.
with that said...
is either RSPL or HSPL installed?
if not... you will need to get that. DFT's RSPL/HSPL.
and here is a little how-to if you have the wrong SPL. see steps 2 and 8.
after that,
any ROM in the HD7 WP7 Development thread should flash fine.
sh4d0w86.
Click to expand...
Click to collapse
Thats great thanks! just a few questions for you..
RSPL or HSPL? (sorry new to this ^^")
So if i install a nodo ROM (considering i'm currently on Mango) will it just roll back with no problems?
do i need to do anything specific with these ROMS that have different radio software versions? or can i just ignore them?
I'm trusting if i use the backup tool i can restore my text messages etc again, i dont really feel loosing them. :/
JeffaCakes said:
Thats great thanks! just a few questions for you..
RSPL or HSPL? (sorry new to this ^^")
So if i install a nodo ROM (considering i'm currently on Mango) will it just roll back with no problems?
do i need to do anything specific with these ROMS that have different radio software versions? or can i just ignore them?
I'm trusting if i use the backup tool i can restore my text messages etc again, i dont really feel loosing them. :/
Click to expand...
Click to collapse
RSPL is, basically, a temporary SPL, which returns to OSPL (stock SPL) after reset.
HSPL is 'permanent' until you flash another SPL or return to stock.
both allow you to flash a custom ROM.
if you flash a RUU_Signed.nbh from a NoDo ROM it will 'roll back' fine, but will erase all data currently on the device.
but if you just flash the SPL_Signed.nbh from a NoDo ROM, it will only flash the Radio and SPL. i recommend task00 to flash this.
unfortunately, through Zune, SMS doesn't get backed-up.
sh4d0w86.
sh4d0w86 said:
RSPL is, basically, a temporary SPL, which returns to OSPL (stock SPL) after reset.
HSPL is 'permanent' until you flash another SPL or return to stock.
both allow you to flash a custom ROM.
if you flash a RUU_Signed.nbh from a NoDo ROM it will 'roll back' fine, but will erase all data currently on the device.
but if you just flash the SPL_Signed.nbh from a NoDo ROM, it will only flash the Radio and SPL. i recommend task00 to flash this.
unfortunately, through Zune, SMS doesn't get backed-up.
sh4d0w86.
Click to expand...
Click to collapse
I've managed to roll my phone back using the zune software, i didnt know that was a option, so now it's back to NODO but with the problem of my SPL is set to v4.5 and the link you sent me here takes the SPL to 4.05 if i'm reading it right.. but DFT RSPL only goes up to 3.4... so have i hit a dead end completely? :S
JeffaCakes said:
I've managed to roll my phone back using the zune software, i didnt know that was a option, so now it's back to NODO but with the problem of my SPL is set to v4.5 and the link you sent me here takes the SPL to 4.05 if i'm reading it right.. but DFT RSPL only goes up to 3.4... so have i hit a dead end completely? :S
Click to expand...
Click to collapse
nope. not a dead end.
quickest fix.
01. visit HD7 Radio Wiki, link in my signature.
02. download a stock NoDo or Pre-NoDo Radio for your device.
03. extract the SPL_Signed.nbh from the 'stock' folder.
04. flash SPL_Signed.nbh with task 00.
05. SPL has now been rolled back.
from there...
06. flash RSPL.
07. flash HSPL, if desired.
08. flash newer Radio, if desired, using RUU_Unsigned.nbh from desired Radio.
09. flash Custom ROM of choice.
sh4d0w86.
sh4d0w86 said:
nope. not a dead end.
quickest fix.
01. visit HD7 Radio Wiki, link in my signature.
02. download a stock NoDo or Pre-NoDo Radio for your device.
03. extract the SPL_Signed.nbh from the 'stock' folder.
04. flash SPL_Signed.nbh with task 00.
05. SPL has now been rolled back.
from there...
06. flash RSPL.
07. flash HSPL, if desired.
08. flash newer Radio, if desired, using RUU_Unsigned.nbh from desired Radio.
09. flash Custom ROM of choice.
sh4d0w86.
Click to expand...
Click to collapse
Sorry another question, I had found this program for making backups, now for some reason i cant post on that thread but it wont restore after i installed the new ROM, i dont suppose you have any idea why? it says restored in 6. something seconds then restarts the phone with no changes :S
Thank you again for all your help ^_^
JeffaCakes said:
Sorry another question, I had found this program for making backups, now for some reason i cant post on that thread but it wont restore after i installed the new ROM, i dont suppose you have any idea why? it says restored in 6. something seconds then restarts the phone with no changes :S
Thank you again for all your help ^_^
Click to expand...
Click to collapse
i unfortunately don't know.
best bet, is to ask the question on that thread.
i haven't ever tried using it to back up my device.
actually, i haven't ever backed up my device before.
too busy constantly flashing and testing my intrinsicROM.
sh4d0w86.
Hi xda-developers community,
sr if this question is anoying but i tried to find a answer for it but the only things i was able to find out that some errors occured. But not if Succes or Failed.
I want to developer unlock my HD7 via custom rom.
Here are my System Infos:
OS Version: 7.10.8107.79
Firmware: 2250.21.51101.401
Hardware: 0002
Bootloader: 5.11.2250.0(134578)
Chip-SOC: 2.2.5.0
I have noticed that the bootloader is my main problem. I first need to downgrade. Problem no Synco Save via Zune (damaged HardDisk).
So is there any actual way to successfully downgrade my HD7 to a version to be able to install a Custom Rom?
And another question is, when really accomplished to flash a custom rom, is it possible to update via Zune or does this recover to normal rom?
Thx for ur advices to a noob with WP7.
nice regards Synergi
Damn sr pls if a moderator could be so friendly to add a Title to my Thread i forgot to add this.
thx
is the first link in my signature. wrote a tutorial.
press edit button to edit a post and it's title.
that tutorial helped me out too....just follow it and u have a unlocked phone!!!
welcome to customization
Thx for Link, but before i proceed i need a little bit more information pls.
1) For what i need to download task 00 & task 29? In ur tut they are never used again? Or did i missed anything?
2) Next is in ansar.ath.gr's tut he tells not to install after downgrade a custom rom with 5.10 Bootloader. Is this ment to if i install a stock ROM with this version that downgrage would loose because i install this bootloader again? (sr for bad english)
3) difference between RSPL & HSPL. as i read the RSPL is only active until restart and the HSPL is fixed. So with the RSPL i can try if everything works correct and the Cook it with the HSPL is this correct?
4) What kind of customs roms can i use for a HTC HD7 Europe/Austria A1???
Thx for ur advice.
sincerly Synergi
SynergiAios said:
1) For what i need to download task 00 & task 29? In ur tut they are never used again? Or did i missed anything?
Click to expand...
Click to collapse
when it comes to it... the step instructs which to use.
SynergiAios said:
2) Next is in ansar.ath.gr's tut he tells not to install after downgrade a custom rom with 5.10 Bootloader. Is this ment to if i install a stock ROM with this version that downgrage would loose because i install this bootloader again? (sr for bad english)
Click to expand...
Click to collapse
he says to not install a 5.xx ROM so you avoid putting yourself in the same position you were in before.
SynergiAios said:
3) difference between RSPL & HSPL. as i read the RSPL is only active until restart and the HSPL is fixed. So with the RSPL i can try if everything works correct and the Cook it with the HSPL is this correct?
Click to expand...
Click to collapse
answered in one of the first posts in that thread.
RSPL is temporary.
HSPL is permanent.
SynergiAios said:
4) What kind of customs roms can i use for a HTC HD7 Europe/Austria A1???
Click to expand...
Click to collapse
any Schubert Custom ROM once you are XSPL'd.
naving 4
Really Thx for ur advice i will now continue and try it out. Hopefully i will return with jailbroken Phone x)
SynergiAios said:
Really Thx for ur advice i will now continue and try it out. Hopefully i will return with jailbroken Phone x)
Click to expand...
Click to collapse
welcome, glad i could help. happy flashing.
Hello XDA Community,
i need a little bit ur help x) As usual.
I followed ansars Guide to downgrade my spl. This worked successfully. Tricolor screen says:
PD29100 MFG SS_BC (4K)
SPL-1.57.2250.0(113571)
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
When RomUpdateUtility finished an error occured which said that a file is curroped. But Phone rebooted successfully.
First Question was this just a tiny bug or went sth wrong?
Secound Question is: I wanted then to continue installing custom ROM. I used DFT_RSPL to get rspl to flash unsigned custom rom. DFT successfully run trough but phone didn't reboot and no RSPL still SPL. And HSPL cant continue. So my problem is i cant get RSPL to work. What am i doing wrong?
nice regards
Synergi
i hadn't ever used ansar's SLSPL before...
i suggest flashing Shipped pre-NoDo or NoDo ROM for your device.
maybe will 'fix' whatever went wrong with SLSPL.
ok thx. actually im downloading pre-nodo 1.54 Europe SPL. Sadly Rapidshare free is actually really slow 30Kb/s
When finished downloading i will try to flash this Version over Ansars and then RSPL -> to flash custom ROM.
Thx for ur advice.
SynergiAios said:
ok thx. actually im downloading pre-nodo 1.54 Europe SPL. Sadly Rapidshare free is actually really slow 30Kb/s
When finished downloading i will try to flash this Version over Ansars and then RSPL -> to flash custom ROM.
Thx for ur advice.
Click to expand...
Click to collapse
welcome, hope it solves the issue.
Success !!!
After ansars SPL i just had to flash a stock ROM. I choosed PRE-NODO 1.54 Europe and then i was able to RSPL and finally flash a Custom ROM.
Really thx for all ur help.
What im now interested in is, which is the best Custom ROM? Or better asked which is not the best, but which should I prefer?
I want as many possibilities as possible.
Actually im having DeepShine Custom ROM active but i want to look trough of the top to make a decision which i will take for further use.
Can someone maybe tell me which is his favourite and why?
And another question is -> whith the custom rom installed am i able to update via zune or shouldn't i do that? (If not how can i sync with zune and prevent zune to update my phone)
nice regards Synergi
As i now read through a little bit of the custom roms available, i think i will go with Nextgen+ It sounds like a good work for me x) If u have any other suggestions pls let me know thx
SynergiAios said:
What im now interested in is, which is the best Custom ROM? Or better asked which is not the best, but which should I prefer?
Click to expand...
Click to collapse
Custom ROM choice is all about personal preference.
the top Custom ROMs seem to be:
in alphabetic order: Deepshining, Dynamic7, intrinsic, NextGen+
As i have now the Custom ROM NexrGen+ active i have a problem again x) As usual sr XDA Community.
I cant cumunicate with my pc.
Windows 7 x64
Installed: WMDC, CoreCon2, Zune
The System recognizes that a Windows Phone 7 is plugged in but can install the drivers for it.
Any solution for this?
Nice regards
SynergiAios said:
The System recognizes that a Windows Phone 7 is plugged in but can install the drivers for it.
Any solution for this?
Click to expand...
Click to collapse
what drivers are you referring to?
Sr for my bad english. It's not actually the drivers. In German its called "Gerätesoftware" i think its device software. Windows tells me that he wasn't able to install the device windows phone 7.