I had seen the Aserg using he USPL to flash his rom and radio.
GUYs:
DO remember,if you are not Hard-spl,your spl ipl is lower than 4.00.0000,Please don't run JUMPSPL or USPL-BETA3 by pof.
Trust me or you will find lots of bricks on street.
Click to expand...
Click to collapse
If you are HTC 4350 OR VADEFONE OR T-WING.run official ruu update to WM6 frist,to make you IPL SPL upon 4.00.0000
If you think I am joking.keep on..
Click to expand...
Click to collapse
check more here or here
And if ipl/spl: 5.04.0001/5.04.0000 from WM5??? That is possible?
ASerg said:
And if ipl/spl: 5.04.0001/5.04.0000 from WM5??? That is possible?
Click to expand...
Click to collapse
that's ok. nothing at all.
safely.
Now I shall check up
I confirm. Thanks!
ASerg said:
I confirm. Thanks!
Click to expand...
Click to collapse
please warn people in your post.
and why don't you use jspl.it's quick and safely.uspl too slow but simply use
i want to be able to flash my rom so that i could install the HTC RUU on my tmo wing ( it's actually a herald but i was stupid enough to put in the TMO RUU)
Do you know any way i could do that with instructions available?
Also, once i do it, would the phone become unlocked again or still locked Just wondering.
umchriswho said:
i want to be able to flash my rom so that i could install the HTC RUU on my tmo wing ( it's actually a herald but i was stupid enough to put in the TMO RUU)
Do you know any way i could do that with instructions available?
Also, once i do it, would the phone become unlocked again or still locked Just wondering.
Click to expand...
Click to collapse
The HARD-SPL is a little more dangerous than the USPL... I can help you find ways to get any ROM you want on that phone easily enough, but UNLOCKING it again is the hard part. There's not 100% sure fire SAFE way of doing it.
welll, i just installed the hard-spl on my device and it went through
there's just one thing that gets me...
what's the difference with this hard-spl and HTC?
is the only difference is that the boot screen is different or are there more features?
For now, I just need a comparision of what the hard-spl has from the HTC one.
The Hard-SPL is a customer SPL. It's permanent, too. You will have to create your own customized RUU from now on, one that lacks the SPL. You can't flash RUU's that contain SPL because the SPL is now write protected. It's convinient, though, because now you can't accidently screw it up. (It's safe once you have it IN your device. Too many people brick their phones trying to get it in there in the first place, though.)
So now i won't be able to put in the HTC RUU anymore?
All right, sorry i'm being so stupid, but here's another question...
You said that i now have to make my own customized RUUs?
What do you mean by that?
If you don't mind, you could send me a pm, I don't want to spam this thread with my stupidity.
Now you can flash ANY rom you want.
ALL cooked ROms - really all - without the chance of bricking = your device is SAFE.
IF you respect this little thing
every RUU Rom Update Utility
contains:
1. Enterbootloader.exe
2. Rapitool.exe
3. RomupgradeUtility.exe (the one you start)
4. RUUGetinfo.exe
5. RUU ressource.dll
6. RUU_signed.nbh (that is the custom system OS - you can put every HERALD .nbh here postet in touchIT3 for example)
7. SPL.nbh ---- !!!!!!!! delete this allways!!!!!!!!! ------ (it is in all official RUU but delete it)
now you can flash with an official update tool all custom roms for you herald.
But don´t use wing roms - the keyboadmapping is different.
There are good herald roms, too.
Good luck
umchriswho said:
So now i won't be able to put in the HTC RUU anymore?
All right, sorry i'm being so stupid, but here's another question...
You said that i now have to make my own customized RUUs?
What do you mean by that?
If you don't mind, you could send me a pm, I don't want to spam this thread with my stupidity.
Click to expand...
Click to collapse
Dear Maestro Help upgrade to WM6
Dear Canonyang,
Have the following
Dopod C800 WM5 5.1.422 (Build 15633.3.2.0)
Can you please help me upgrade to WM 6
Gratefully
neelanjoo
canonyang_China said:
please warn people in your post.
and why don't you use jspl.it's quick and safely.uspl too slow but simply use
Click to expand...
Click to collapse
Related
i need to get my ipl an spl back to 2.25 any links suggestions
If your IPL/SPL are changed from what they used to be then I'm assuming that your device is CID unlocked? If it is then you could always flash T-Mobiles default rom and that will get your IPL/SPL back to where you want it and then you could change back to any other rom after that as long as it doesn't include an IPL/SPL. Doing this will keep the IPL/SPL that you want but still have a custom rom.
Just a suggestion.
ok well were is the t-mobile rom i have a cingular 8125 will that work still
cujo316 said:
ok well were is the t-mobile rom i have a cingular 8125 will that work still
Click to expand...
Click to collapse
or go to the htc america site. The cingular 2.25 rom is there.
can i have a link to that
cujo316 said:
can i have a link to that
Click to expand...
Click to collapse
You can either search the forum for it or you can Google for it.
what do u mean search the fourm on google
man...some people just don't understand.
http://www.america.htc.com/support/8125/software-downloads.html
took me 2 sec to search on google.
ok well im sry
thomassster said:
man...some people just don't understand.
http://www.america.htc.com/support/8125/software-downloads.html
took me 2 sec to search on google.
Click to expand...
Click to collapse
Just wait until he downloads it and then asks how to use it.
The next time I install a ROM can I use the Cingular ROM or should i still keep flashing the T-Mobile one (MDA_software_update_226102_22610105_022511.exe)? IPL/SPL in sig is still correct..
drawde said:
The next time I install a ROM can I use the Cingular ROM or should i still keep flashing the T-Mobile one (MDA_software_update_226102_22610105_022511.exe)? IPL/SPL in sig is still correct..
Click to expand...
Click to collapse
It doesn't matter.
oo kegobeer that rom does not work
If all you need is to get your phone back to an IPL/SPL of 2.25, then download this file, unzip it and run the ROMUpdateUtility_Wizard_NoID. You can ignore all of the warnings that it will erase all of your files. This won't touch that part of your ROM so all of your files will still be there after you update it.
Are you going to create the same topic everyday? Is it some kind of stupid bet that you've lost or what???
Unlock Htc 8125
I Have 1 Htc 8125 To Unlock But How Can I Unlock ? Plese Tell Me Solution
Let me think...
READ! For God's sake.
gaurangdsi said:
I Have 1 Htc 8125 To Unlock But How Can I Unlock ? Plese Tell Me Solution
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=263116
ya like everyone is saying search google , and also go to the cingular/att .com
common sense
Hey Guy's,
I would like flash my "French" HTC P4350 with the English official WM6. It has now the official French WM6 on it.
I have both Rom's, tried it with the ASerg cab file and yes did a soft reset before...but I always get the country ID error code!
In some of the forum threads it looks like it should be possible with the ASerg cab file, or is it only possible to flash "coocked" rom's with the ASerg Cab file?
My HTC P4350 is unbranded and no Sim lock, no Orange/Vodafone or any other operator **** on it...
Should I get it CID unlocked to flash an "other" official rom on my device? Are there some guy's who can confirm that it works with an CID unlock, before I pay 28€ ?
Thanks,
Yves
Wauw....a lot of feedback from all those "specialists" here.
I gues if it comes to flashing original roms they do not have a clou?!
Thanks for your help...
cfds said:
Wauw....a lot of feedback from all those "specialists" here.
I gues if it comes to flashing original roms they do not have a clou?!
Thanks for your help...
Click to expand...
Click to collapse
That's a bit harsh, don't you think? It's been slow in the forum, in general. You got a little impatient.
Now on to your question:
Aserg's policies only help when you are upgrading through a single os.nb, NOT when you're using a full fledged RUU. For that, you need a CID unlocked phone. You can:
1. Extract the Windows.NB (a.k.a. os.nb) from the RUU and flash it using the Aserg way.
2. Unlock your phone with the somewhat dangerous HardSPL.
Go and take the HardSPL rom, it is not dagenrous at all for P4350
After that you can flash any official Rom u want, but warranty has gone....
Yeah your right, I am impatient and would like to apologize!
HTC France "changed" my dutch Herald into a full French one, including the keyboard. It went in with a deffective touchscreen and sometimes it did a softreset when sliding the keyboard. It came back with new mainboard/touchscreen/keyboard, all under warranty...
I am not an expert if it comes in modifiyng flashing etc, so I would like to avoid using the HardSPL, seems a lot of people owe a brick after trying...
I will go for the CID unlock option...
Thanks for the feedback!
For my herald, I wanted to upgrade it to TOUCH IT but it didn't work.
At first my herald was unlocked and on the reboot screen it said "HTC."
Now after installing the Official RUU from the instructions, it now shows up tmobile and it's not unlocked anymore..=[
Does anyone have the HTC unlocked rom for my herald like it was before?
I really need it back.
Thanks for your help!
umchriswho said:
For my herald, I wanted to upgrade it to TOUCH IT but it didn't work.
At first my herald was unlocked and on the reboot screen it said "HTC."
Now after installing the Official RUU from the instructions, it now shows up tmobile and it's not unlocked anymore..=[
Does anyone have the HTC unlocked rom for my herald like it was before?
I really need it back.
Thanks for your help!
Click to expand...
Click to collapse
You flashed the Tmobile wing's Official RUU not the HTC official RUU. Unfortunately, there's no way to unlock it unless you USPL and run the REAL HTC RUU. I'm not 100% if that would work, though.
yeah that's what i want to do
I want the HTC REAL RUU back...do you know where i could get it?
http://rapidshare.com/users/5EWZ4
take one of your language
- put xda in bootloader
- flash
umchriswho said:
yeah that's what i want to do
I want the HTC REAL RUU back...do you know where i could get it?
Click to expand...
Click to collapse
WOW thanks!!!
I'm going to try it out now!!!
But if he overwrote the SPL with the Tmobile SPL, it will be locked and he won't be able to flash it very easily.
so after installing this, will it also be unlocked too or no?
just wondering
umchriswho said:
so after installing this, will it also be unlocked too or no?
just wondering
Click to expand...
Click to collapse
Only if you can figure out a way to flash it... and you can't flash it if it's locked. You can try the USPL way, but it's dangerous. I would research first.
yeah...it didn't go through....
it told me there was a invalid error...
any way i can get pass that?
what's USPL and how would it be dangerous?
could you also send me the link to it please?
umchriswho said:
yeah...it didn't go through....
it told me there was a invalid error...
any way i can get pass that?
Click to expand...
Click to collapse
...
I said it wouldn't let you flash it... because your phone is now CID Locked.
Did you try using USPL? Or just running the RUU?
there is a way of hard-spl.
if it is starting up.....
but i don´t know if it works for you after t-mob is on your device.
give it a try maybe.
it worked for me and many other....
umchriswho said:
yeah...it didn't go through....
it told me there was a invalid error...
any way i can get pass that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=343446&highlight=USPL
in that link, they talk about the USPL and flashing and said it was okay right?
they also said that JSPL would be better or something like that to flash...
all i need is the links to the program so that i can do it?
Anyone have any links to any of those two: USPL or JSPL?
Thanks
umchriswho said:
http://forum.xda-developers.com/showthread.php?t=343446&highlight=USPL
in that link, they talk about the USPL and flashing and said it was okay right?
they also said that JSPL would be better or something like that to flash...
all i need is the links to the program so that i can do it?
Anyone have any links to any of those two: USPL or JSPL?
Thanks
Click to expand...
Click to collapse
i sent you a pm
Does anyone know if flashing a valid SPL WHILE in USPL mode is safe? If it is, that'd be a great way to unlock these phones... if you can get your hands on a unlocked HTC RUU.
i have a tmobile wing and have a hard spl on it how do i go stock again??????
unpapi_4u said:
i have a tmobile wing and have a hard spl on it how do i go stock again??????
Click to expand...
Click to collapse
Back to the stock SPL? The only thing I can think off and it MAY NOT WORK OR BRICK YOUR DEVICE because I haven't tested it is using USPL to flash the stock RUU and hopefully that will overwrite the SPL.
From my understanding, the stock Tmo Wing RUU does have SPL and will over write it back to stock.
duprade said:
From my understanding, the stock Tmo Wing RUU does have SPL and will over write it back to stock.
Click to expand...
Click to collapse
Except that the HardSPL is coded not to let another SPL overwrite it. Using USPL should overwrite this lock.
duprade said:
From my understanding, the stock Tmo Wing RUU does have SPL and will over write it back to stock.
Click to expand...
Click to collapse
can't you strip the rom of the spl like on the wizard roms?
systematic said:
can't you strip the rom of the spl like on the wizard roms?
Click to expand...
Click to collapse
Yes. That will let you use any ROM, but if he wanted to go back to the stock SPL for warranty reasons, that would be the way to go, I would hope.
any one have USPL?
unpapi_4u said:
any one have USPL?
Click to expand...
Click to collapse
go to the open touch thread, you can find it in the first post there.
its not there.......anyone have a direct link?
unpapi_4u said:
its not there.......anyone have a direct link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=351966
i tried installing it but in step three the ruu dose work period.......any other way...or shuold i give up?
unpapi_4u said:
i tried installing it but in step three the ruu dose work period.......any other way...or shuold i give up?
Click to expand...
Click to collapse
I'm sorry. Please restate your post. I didn't quite understand it.
i found a eaiser way and u dont need a uspl all u need to do is get the stock ruu and run it. your phone is going to restart...simply put it back into bootloader mode without taking off the usb and your done!!!!!
unpapi_4u said:
i found a eaiser way and u dont need a uspl all u need to do is get the stock ruu and run it. your phone is going to restart...simply put it back into bootloader mode without taking off the usb and your done!!!!!
Click to expand...
Click to collapse
This will not overwrite HardSPL.
hey it just worked for me maybe some poeple should test it out 2
unpapi_4u said:
hey it just worked for me maybe some poeple should test it out 2
Click to expand...
Click to collapse
I don't understand. You HAD the HARDSpl installed in your phone? You ran the stock RUU and it automatically wrote the HardSPL even though the HardSPL was purposely coded not to allow that?
SO you say when installing a official RUU WITH SPL.nbh - the HArd-SPL will be overwritten??
Please clarify your devicesttings.
i tried it again and i missed a step (my bad)
here are the steps that worked for me......
step 1 :run the uspl (in the botton link of these steps) but in step 3 of the uspl program the ruu isnt going to work..
step 2 : put ur phone in bootloader run the stock ruu and at 1% the phone is going to restart and get out of bootloader..
step 3:simply put it back into bootloader (without disconnecting it to your computer) and let the stock ruu run...after go thru the steps...the align the screen put a pasword ect.. let it update the windows (if u dont want it to update then just soft reset the phone before it starts) and then your done.
http://forum.xda-developers.com/showthread.php?t=351966
just thot i'd co-sign for unpapi_4u
verified: wing can go from hard-spl to stock spl via uspl
1. download uspl aka flash center and wing factory ruu
2. copy RUU_signed.nbh and SPL.nbh from wing factory ruu to flash center
3. run it
completed successfuly with no intervention, didnt have to put in boot loader
after flashing i checked (soft reset while holding camera button)
spl was 4.10.0000
Bootloader--Stuck
Hi,
After trying the above, I now get the bootloader screen... showing IPL 4.17.0001 and SPL 4.10.0000.. Try flashing it with
Stock--RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe [Error 226 Flash Write] &
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe [Invalid Vendor ID] & RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe [Invalid Vendor ID].
I also tried alot of the cooked rom v4.0/V4.4/OpenTouch 2.4/
HERALD.ASERG.23F.WM6.RUS.PS6.rar but also get error message as file corrupt [#270]
I had the hardSPL installed before this..Trying to got back to stock rom because I am selling the phone. Do you guys have any suggestion?
Which ROM can I use to make it work.
My phone is the Dopod C800
Thanks in advance..
Eddie
Guys, i've finally decided to flash my stock rom. It's orange one and info says is't SPL-1.14.0000
Now, but whenever i connect phone to computer it says "serial" on the bottom and i'm gettin warning usb device not recognized from computer.
Help pls..
Gixso said:
Guys, i've finally decided to flash my stock rom. It's orange one and info says is't SPL-1.14.0000
Now, but whenever i connect phone to computer it says "serial" on the bottom and i'm gettin warning usb device not recognized from computer.
Help pls..
Click to expand...
Click to collapse
Hi, do you have installed the correct drivers??
http://forum.xda-developers.com/showthread.php?t=524619
cheer dude, but i think i've sorted it. USB cable was connected through the hub, so pluged it in directly, voila! it worked lol..
Sorry for double post, bit noobish question.
so it shows my SP is 1.14.0000
what am is suppose to do next? use USPL or HSPL?
And what rom? first 1.56?
it's just way too confusing, well at least for me
Gixso said:
Sorry for double post, bit noobish question.
so it shows my SP is 1.14.0000
what am is suppose to do next? use USPL or HSPL?
And what rom? first 1.56?
it's just way too confusing, well at least for me
Click to expand...
Click to collapse
You can use USPL or HSPL. USPL will change your stock SPL only for a moment, so you can't be worry about warranty.
HSPL will change SPL and replace it. You can also restore stock SPL and delete HSPL from device before you give back device to the service.
but can i use any desired rom straight away? if so, why do i need to know what my spl is?
Gixso said:
but can i use any desired rom straight away? if so, why do i need to know what my spl is?
Click to expand...
Click to collapse
if you have stock ROM now and you want to change it to e. g. Miri 6.5 v25 ROM which is 1.56 based, you must first install official 1.56 ROM which replace youcy stock SPL to 1.56. Second you can flash it with USPL or HSPL to get e. g. Miri ROM.
rafalplus03 said:
if you have stock ROM now and you want to change it to e. g. Miri 6.5 v25 ROM which is 1.56 based, you must first install official 1.56 ROM which replace youcy stock SPL to 1.56. Second you can flash it with USPL or HSPL to get e. g. Miri ROM.
Click to expand...
Click to collapse
Ah i understand, first of all i need new official rom, which is 1.56 and then i can use basically any desired rom. Does flashing 1.56 rom means i'm gonna loose warranty on my phone?
Gixso said:
Ah i understand, first of all i need new official rom, which is 1.56 and then i can use basically any desired rom. Does flashing 1.56 rom means i'm gonna loose warranty on my phone?
Click to expand...
Click to collapse
you can get 1.56 ROM on official HTC Website- you You'll not lose the guarantee
but
Every unofficial ROM from XDA it's the loss of the guarantee, but you can restore stock ROM and go to service...
rafalplus03 said:
you can get 1.56 ROM on official HTC Website- you You'll not lose the guarantee
but
Every unofficial ROM from XDA it's the loss of the guarantee, but you can restore stock ROM and go to service...
Click to expand...
Click to collapse
wonder if could help me more, just tried to install official update to 1.56 but it says it's not compatible with my device.
Gixso said:
wonder if could help me more, just tried to install official update to 1.56 but it says it's not compatible with my device.
Click to expand...
Click to collapse
so you have to get deviceID from guy who can download it. Then you can install it using USPL/HSPL
Gixso said:
wonder if could help me more, just tried to install official update to 1.56 but it says it's not compatible with my device.
Click to expand...
Click to collapse
dnload and install hspl 1.56 olinex from the tutorial thread..
no need to update to official rom... jus a waste of tim..
if u dont want hspl then dnload 1.54 stock from the same thread and flash it.
use uspl nex tim onwards to flash new roms.
updatin to officials is a waste of time..
that's exactly what i'm doing right now. Downloading 1.54 update and then will install it and put on dutty'r extreme i think it's called. Is that correct procedure?
Talking about 1.56, what i ment is that i've downloaded updated and it wouldn't install. So guess will have to do it through the bootloader. Am i correct?
Last think i want is to damage my "gem" lol..;-)
Gixso said:
that's exactly what i'm doing right now. Downloading 1.54 update and then will install it and put on dutty'r extreme i think it's called. Is that correct procedure?
Talking about 1.56, what i ment is that i've downloaded updated and it wouldn't install. So guess will have to do it through the bootloader. Am i correct?
Last think i want is to damage my "gem" lol..;-)
Click to expand...
Click to collapse
well to dnload the update u need a serial number..
nd u always can flash from bootloader as it is the safest way.
the best advise i can give u is install hspl 1.56 olinex..
this is because in future if nethin goes wrong wid ur usb port u still can flash stock rom and spl.
if u use uspl it will not be possible...
and in any case fr warranty purposes also ull change spl from 1.54 to 1.14.
so why not 1.56.olinex to 1.14.
involves the same steps rite!!
cvchetan said:
well to dnload the update u need a serial number..
nd u always can flash from bootloader as it is the safest way.
the best advise i can give u is install hspl 1.56 olinex..
this is because in future if nethin goes wrong wid ur usb port u still can flash stock rom and spl.
if u use uspl it will not be possible...
and in any case fr warranty purposes also ull change spl from 1.54 to 1.14.
so why not 1.56.olinex to 1.14.
involves the same steps rite!!
Click to expand...
Click to collapse
May i ask you for a link? i can't find the 1.56 hspl olinex
Gixso said:
May i ask you for a link? i can't find the 1.56 hspl olinex
Click to expand...
Click to collapse
Try a little searching next time and abide by forum rules. HSPL 1.56 can be found here
Fallen Spartan said:
Try a little searching next time and abide by forum rules. HSPL 1.56 can be found here
Click to expand...
Click to collapse
cheers for you help, will do next time harder. Noob here and all is so confusing. Hope i ain't bothering anyone..
Gixso said:
cheers for you help, will do next time harder. Noob here and all is so confusing. Hope i ain't bothering anyone..
Click to expand...
Click to collapse
and hey dont be afraid to ask any questions..
it's better to ask the stupidest question rather than killin ur fone..
cvchetan said:
and hey dont be afraid to ask any questions..
it's better to ask the stupidest question rather than killin ur fone..
Click to expand...
Click to collapse
yeah i know been reading whole day, guess i will have a go now, just bit scared to brick it
got usb updated, got WMDC updated, got framework , ..
Gixso said:
yeah i know been reading whole day, guess i will have a go now, just bit scared to brick it
got usb updated, got WMDC updated, got framework , ..
Click to expand...
Click to collapse
You won't brick your phone. Thats why we are here, to prevent that happening. If your unsure of something, ask away. We can help you. All I ask is that you read and search first before posting.