AT&T Tilt 8925 ( HTC ) SIM LOCK - Tilt, TyTN II, MDA Vario III General

CAN ANYONE HELP ME WITH THIS?
WHEN I INSERT MY NON AT&T SIM I GET THIS MESSAGE:
SIM LOCK
NETWORK IS LOCKED, PLEASE INPUT UNLOCK CODE.
I'VE TRIED JOCKY SIM UNLOCKER BUT I CAN'T GET IT TO WORK!!!!!!!!!!!!!!!!!!!!
WHAT COULD I BE DOING WRONG??????????????

nutty4u said:
CAN ANYONE HELP ME WITH THIS?
WHEN I INSERT MY NON AT&T SIM I GET THIS MESSAGE:
SIM LOCK
NETWORK IS LOCKED, PLEASE INPUT UNLOCK CODE.
I'VE TRIED JOCKY SIM UNLOCKER BUT I CAN'T GET IT TO WORK!!!!!!!!!!!!!!!!!!!!
WHAT COULD I BE DOING WRONG??????????????
Click to expand...
Click to collapse
You are hardspl'd but that doesn't mean that you are sim unlocked.
Did you follow all these steps from mskip's flashing guide ?
mskip said:
4. SIM and CID-Unlock [OPTIONAL]
For more reading go *HERE*
* YOUR DEVICE MUST BE SYNCHED WITH YOUR COMPUTER BEFORE RUNNING EACH STEP *
*Put your phone into Bootloader and update to a 6.1 Rom first if you get a black screen after Flashing the Patched Radio*
*If the program wont run u may need to install Microsoft .NET 2.0 on your computer to get it working*
1. Make a note of your current Radio in case you need to flash it back
2. Run KaiserUnlocker.exe, follow the instructions
(if you already have HardSPL on your phone you can skip straight to Step2)
3. After patched Radio has been flashed phone will restart and sync with the computer
4. On the Unlocker Program it should say Radio Patched at the bottom
5. Click on Step3 (Run Unlocker). This will bring up the Unlocker screen on your phone
6. If you want to check the status of your Sim Lock or CID Lock click the appropriate buttons
7. Click on Remove Sim Lock and Set CID, then click "Commit Changes"
Click to expand...
Click to collapse

Must i leave the foreign sim inside the phone will i complete this process?

ERRoR Connection
everytime i run the unocker i get the connection error! What's wrong? I tried changing the radio but still an error.

Sim lock help
It finally worked! Thanks To Denco 7 help! You Rock!!!!!!!!!!!!

Related

Issues unlocking G4 Wizard

Hi Guys,
New here so please be nice
I have read a load of the tutorials and threads here and have now attempted to CID unlock and SIM unlock my G4, I used the hard_SPL-G4 to CID unlock, which has worked well and I have managed to upgrade to WM6 THe problem that I have now is when I try to SIM unlock the phone, I am using Lokiwiz03 which runs and get the SIm unlock code, but I enter this into the phone and it seems to unlock ok as I get to the normal home page screen, now as soon as the phone tries to register onto the network it goes back to the Network is locked please enter unlock screen, if before the phone has tried to register I put it into flight mode, then everything is ok (except I cant make calls )
Does anyone have any ideas why this may be? SHould I have sim unlocked before CID unlocking?
Thanks in advance.
Syngress

Att Tilt How To Unlock Sim?

I HAVE ATT TILT
IN BOOTLOADER MODE IT SHOWS
KAISI*0
SPL-1.56.0000
CPLD-8
How can i unlock it? if I put any other sim rather then ATT its show SIM LOCK
Please help
Thanks
Maybe you should read the WIKI to start. But I used KaiserUnlocker to unlock my sim card, but that is what I did. You do what you want, but I would first suggest again that you READ THE WIKI.
maansii said:
I HAVE ATT TILT
IN BOOTLOADER MODE IT SHOWS
KAISI*0
SPL-1.56.0000
CPLD-8
How can i unlock it? if I put any other sim rather then ATT its show SIM LOCK
Please help
Thanks
Click to expand...
Click to collapse
just like kdkobes said please read the wiki. The question you ask has been answered many times, trust me i asked it. but the info is there.
and secondly, if you got the phone "legally" and are an att customer all you had to do is dial "611" from your phone get in touch with att and they will give you the sim unlock code for your device ... ; just tell them you are going oversees (use a country like pakistan were att doesn't provide service) and need the unlock code .. i did it and they gave me the code in 5 minutes. Or you can use pof's hardspl which will unlock your cid and sim install olipro's spl (enabling u to flash new roms to your phone).
But going back to statment one, please read the wiki
cheers,
sire
Calling AT&T vs. HARDSPL
If you get AT&T to give you a SIM Unlock code, do you still need to run HARDSLPL to install a cooked ROM?
jdmba said:
If you get AT&T to give you a SIM Unlock code, do you still need to run HARDSLPL to install a cooked ROM?
Click to expand...
Click to collapse
Yes. There you got your free answer without needing to search. Everyone gets one.
SIM Unlocking just allows you to put any GSM carriers SIM card in your phone and it will work. HardSPL changes the boot loader so you can update the Roms.

"SIM Lock" Network Locked - Enter unlock code

Even after doing the Hard SPL the device is asking for unlock code if I insert a foreigh sim card.
I tried doing the USPL also. Same results.
After Hard SPL I also tried to install Touch_IT_wm6.1_Full_-Herald_P4350.zip ROM. It installed well but show same SIM locked error.
Please let me know the steps to start fresh and unlock the phone for international usage. I also wanted to load custom rOM but as SIM not supporting so not able to proceed further.
Apreciate any help in this regard.
Device: T Mob Wing (HERA110)
HardSPL is a cid unlock which does not sim unlock the phone. Seeing as how you have a tmobile wing, you should call tmobile and ask them for the unlock code. Just tell them you're going out of country

Unlocking Diamond (Sprint)

Are the instructions the same for the Non-CDMA? I don't want to brick my Sprint Diamond....
Thanks.
You will brick your phone if you try the gsm version of the unlock. I have a sprint diamond and i just unlocked it using this tutorial: http://forum.ppcgeeks.com/showthread.php?t=36062
What's the purpose to unlock a CDMA phone? I can understand to unlock a GSM phone, then you can use any other SIM card.
bonmotwang said:
What's the purpose to unlock a CDMA phone? I can understand to unlock a GSM phone, then you can use any other SIM card.
Click to expand...
Click to collapse
In order to load a custom ROM you must "unlock" the phone first. Thus, the need to unlock this CDMA phone first before playing around with cooked ROMs.
diamond doesn't responde after unlocking
hi to all PLZZ i need help
i install the unlocker without cheking the version cdma or the other version
and in the Pc the program shows then the program was installed 100%
but phone doesnt open any more i tryed hard reset but..nothing.
I don't know what t do plzz HELP M
Try taking battery out, then place it back on, press DOWN and POWER it should go into programming mode, try installing the right unlocker.

[Q]Sim locked after being unlocked for 6 months[Solved]

Something weird happened to me today, my gsm sim card stopped working and shows "invalid card, please contact customer care". Anyone know how can i confirm if this is simlock ?
OS: Sprint viper 4.3 (5.0.1) , edited sku_id to 42
kernel: 3.4.0-g53c7f19
baseband: 1.09.20.0209
firmware: 4.25.651.14
Few things to note:
- GSM/UMTS mode was fully operational from last december until today morning.(Calling/data/sms)
- i tested another GSM SIM(from another carrier) and gives same error, i tested my GSM SIM on another phone and it works
- restored TWRP backup(system,data,boot) to few days back when it was working and it still doesn't work
- flashed sense 7 mod (venom hub), and some updates to HTC service pack came along on play store (this was at least 2 weeks ago)
Solution (it seems that sprint can remotely lock our phones, so this is a temporary workaround ):
Vcek said:
I managed to unlock again by downgrading to 4.4.4 (venom 3.2.1) and followed this guide to unlock and surprisingly it worked.
htc one sim unlocker app is no longer on play store, instead use this code in terminal or adb shell(without quotes) : "am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity"
Click to expand...
Click to collapse
Same here.. have you tried the sim unlocking method again? Does the Hands Free Activation pop up?
zlebors said:
Same here.. have you tried the sim unlocking method again? Does the Hands Free Activation pop up?
Click to expand...
Click to collapse
No i didn't try unlocking again because I think the method only works with jellybean roms. Handsfree activation popped many times but it never completed.
I am currently backing up my internal memory because i will run some RUU installers and test some stuff.
When did this happen to you and what rom are you using ?did you install the sense 7 mod? did you install any htc updates?
Vcek said:
No i didn't try unlocking again because I think the method only works with jellybean roms. I am currently backing up my internal memory because i will run some RUU installers and test some stuff.
When did this happen to you and what rom are you using ?did you install the sense 7 mod? did you install any htc updates?
Click to expand...
Click to collapse
now phone keep asking for activation, because I did a reset from ##786#
that brings my phone to unactivated, I cannot do the unlocking because everytime I flashed sim_unlock.zip or trying to replace the Htcomadmspcs.apk and run the simunlockhelper.apk it gave me an error vDM client stopped.
I can not enter the OMADM Test Menu to press the sim lock.
zlebors said:
now phone keep asking for activation, because I did a reset from ##786#
that brings my phone to unactivated, I cannot do the unlocking because everytime I flashed sim_unlock.zip or trying to replace the Htcomadmspcs.apk and run the simunlockhelper.apk it gave me an error vDM client stopped.
I can not enter the OMADM Test Menu to press the sim lock.
Click to expand...
Click to collapse
i think you have to downgrade to use that file
Vcek said:
i think you have to downgrade to use that file
Click to expand...
Click to collapse
RUU Downgrade? Can not do that, I'm S-ON
Tried flashing 4.4.x roms,either vDM error still there or the Hands Free Activation
I should have not reset through ##786#
zlebors said:
RUU Downgrade? Can not do that, I'm S-ON
Tried flashing 4.4.x roms,either vDM error still there or the Hands Free Activation
I should have not reset through ##786#
Click to expand...
Click to collapse
I managed to unlock again by downgrading to 4.4.4 (venom 3.2.1) and followed this guide to unlock and surprisingly it worked.
htc one sim unlocker app is no longer on play store, instead use this code in terminal or adb shell(without quotes) : "am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity"
for your problem im not sure if it will work without downgrading, but it may be worth trying.
Vcek said:
I managed to unlock again by downgrading to 4.4.4 (venom 3.2.1) and followed this guide to unlock and surprisingly it worked.
htc one sim unlocker app is no longer on play store, instead use this code in terminal or adb shell(without quotes) : "am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity"
for your problem im not sure if it will work without downgrading, but it may be worth trying.
Click to expand...
Click to collapse
I did that adb command and able to enter the OMADM Test Menu on CM11 snapshot, but when I press the "sim lock", the vDM Client error pop up again.. I think its because non-activated status of the phone. It keep asking for an Activation
zlebors said:
I did that adb command and able to enter the OMADM Test Menu on CM11 snapshot, but when I press the "sim lock", the vDM Client error pop up again.. I think its because non-activated status of the phone. It keep asking for an Activation
Click to expand...
Click to collapse
did you replace the OMADM apk file and set the permissions properly and reboot ?
EDIT: you can downgrade the software without downgrading the firmware. (by installing a rom like viper 3.2.1 or any other custom kitkat sense rom)
Vcek said:
I managed to unlock again by downgrading to 4.4.4 (venom 3.2.1) and followed this guide to unlock and surprisingly it worked.
htc one sim unlocker app is no longer on play store, instead use this code in terminal or adb shell(without quotes) : "am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity"
for your problem im not sure if it will work without downgrading, but it may be worth trying.
Click to expand...
Click to collapse
Vcek said:
did you replace the OMADM apk file and set the permissions properly and reboot ?
Click to expand...
Click to collapse
I'll try it again..carefully
zlebors said:
I'll try it again..carefully
Click to expand...
Click to collapse
It works..!! but I have to rename the Htcomadmspcs.apk to .bak and Htcomadmspcs.odex to .bak via TWRP.
-reboot to TWRP
-mount system
-use TWRP file manager, navigate to system/app and rename both file mention above to .bak
-copy paste the modified Htcomadmspcs.apk, reboot to system
-run the simunlockhelper.apk and it will open a menu
-click on SIMLOCK, wait 3secs, back to simunlockhelper app
-switch network to GSM/UMTS, insert gsm sim, reboot the phone
-profit
I was S-ON with latest official Lolipop 5.0.2, flash back the software to Stock Rooted flashable 4.4.4 zip when doing this sim unlock.

Categories

Resources