Related
Hi all,
This has happened twice now - randomly and on different alarms (of the 3 you can set). I have been woken up with what sounds like a phased sound. It turns out the alarm has gone off twice - a fraction of a second apart. There are also two notification messages. I also had an instance of the alarm NOT going off at all (more worrying) despite being set.
Any ideas? A soft-reset seemed to work but then it came back this morning...
Odd!!!
R
rakh1 said:
Hi all,
This has happened twice now - randomly and on different alarms (of the 3 you can set). I have been woken up with what sounds like a phased sound. It turns out the alarm has gone off twice - a fraction of a second apart. There are also two notification messages. I also had an instance of the alarm NOT going off at all (more worrying) despite being set.
Any ideas? A soft-reset seemed to work but then it came back this morning...
Odd!!!
R
Click to expand...
Click to collapse
Yeah, it's an old problem. Duplicate notifications accumulate in the notifications queue. Use Sktools or Memmaid or Scarybear check notifications to clear the Duplicates from the queue. Be careful not to delete entries called repllog though (they are needed by Active Sync.)
It's a good idea to use one of the apps above to clear out on a fairly regular basis.
SKTOOLS
http://classic.pocketgear.com/software_detail.asp?id=14288&associateid=17
MEMMAID
http://www.pocketgear.com/en_US/html/display_product.jsp?id=prod5690734&s_kwcid=memmaid|733014010
Mike
It's really about time this was fixed. My old Magician used to do it too, and that was WM2003SE!
Eventually I got so fed up I started using SPB Time instead, as that doesn't double the alarms.
Where is this queue held? Is it a txt file, reg or inside a binary?
R
Forgot to give a link to the freeware Scarybear Check Notifications app:
http://www.scarybearsoftware.com/products.php
Mike
The Scarybear software does not work well with the Kaiser. I used the standard settings to clear dups, and it hosed ActiveSynch and firing of reminders. A restore to a backup restored functionality, and unfortunately the multiple alarms. (I get three for some alarms.)
Jim_R said:
The Scarybear software does not work well with the Kaiser. I used the standard settings to clear dups, and it hosed ActiveSynch and firing of reminders. A restore to a backup restored functionality, and unfortunately the multiple alarms. (I get three for some alarms.)
Click to expand...
Click to collapse
Good info!!
Personally I always thought Scarybear was a bit dodgy, but it is freeware (but that's maybe just me). I use Sktools and have not had a problem with losing the repllog entries for ASync.
It would be interesting to hear others confirm a problem with Scarybear or otherwise - anyone?
Mike
Yeah - I also toasted ActiveSync. My fault though - I removed a couple of entires, thought "this is easy" so removed all duplicates. BANG. Hard reset and rebuild later and I am now a bit wiser. Does anyone know which lines *are* the double alarms?
Well, for alarms created on the Alarms tab under the clocks and alarms settings, to clear dups one can uncheck any created alarms, do a soft reset, then go back and enable them again. This will clear the duplicates. For synched meeting noticed from the calendar, one can go in with scarybear and manually find dups and delete them one by one.
Alternatively, you can download and install "Task Manager" to check on the notification queue. In the queue, it'll state the time of which the particular event will take place. Find the problem maker and delete it.
I never had this problem with my Trinity before, but now with the TyTN II it's back to the old days of WM2003SE... i just can't believe that M$ still hasn't fixed this...!
Anyway; does anyone know of another FREEWARE app that fixes this (other than Scarybear) reliably? Preferably an app that does nothing other than cleaning out this DB...
i got a couple of issues:
- when someone calls, the phone seems to stutter and cutoff the first ring a bit. doesnt inspire confidence at all. the ringtone is the same file i used to have on my wizard and worked perfectly for years, so its not the file.
- the menu font size if ridiculously huge! i managed to make it smaller by changing the following registry keys:
HKLM\System\GDI\SYSFNT\Ht (from 1000 changed to 700)
HKLM\System\GWE\Menu\Barfnt\Ht (from 1000 changed to 700)
HKLM\System\GWE\Menu\Popfnt\Ht (from 1000 changed to 700)
and that brings the font size down, however the font glyphs like arrows/checkmarks/circles remain the same huge size. i attached a picture to explain.
how do i change the size of those glyphs?
HKLM\System\GDI\Ht (from 1000 changed to 700)
I can not find this value!!!!! I found the other 2, but not thus one.
oddball1 said:
HKLM\System\GDI\Ht (from 1000 changed to 700)
I can not find this value!!!!! I found the other 2, but not thus one.
Click to expand...
Click to collapse
it should be:
HKLM\System\GDI\SYSFNT\Ht (from 1000 changed to 700)
sorry about that, i corrected the original post as well.
come on, i can not be the only one whos bothered that an $800 device can not do its most basic job of RINGING PROBABLY!
no one else has that problem with first ring stuttering? the phone seriously seems to have trouble loading the phone app quickly enough when a call comes in, sometimes it even says "unknown caller" first before recognizing the number and showing the contact name.
Yeah, bit sluggish, thanx WM ?
I don't mind very much, I am not looking at phone waiting for it to ring My ringtone works fine btw?
Try this tweak for ring delay
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0\Sc ript - Change apw3r to apr
Descripion:
a = allow
p = play sound
w3 = wait/delay 3 seconds
r = repeat
f = backlight aan (f1)
v = trillfunctie aan (v0,v1,v2)
Credit should go to Oppainter for finding it
ATMinotaur said:
Try this tweak for ring delay
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0\Sc ript - Change apw3r to apr
Descripion:
a = allow
p = play sound
w3 = wait/delay 3 seconds
r = repeat
f = backlight aan (f1)
v = trillfunctie aan (v0,v1,v2)
Credit should go to Oppainter for finding it
Click to expand...
Click to collapse
Doesnt work on my Diamond even after a soft reset...
ATMinotaur said:
Try this tweak for ring delay
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0\Sc ript - Change apw3r to apr
Descripion:
a = allow
p = play sound
w3 = wait/delay 3 seconds
r = repeat
f = backlight aan (f1)
v = trillfunctie aan (v0,v1,v2)
Credit should go to Oppainter for finding it
Click to expand...
Click to collapse
This has been mentioned and tested many times in other threads. It does NOT work.
xwaiz said:
This has been mentioned and tested many times in other threads. It does NOT work.
Click to expand...
Click to collapse
Fair enough, didn't see posts saying it doesn't work (or I just didn't read those posts properly), and I hadn't properly tested it either.
I have the same problem with the ringtone. I use my own .wav file. I hope someone comes up with an answer, it is a pain ;(
pulp said:
come on, i can not be the only one whos bothered that an $800 device can not do its most basic job of RINGING PROBABLY!
no one else has that problem with first ring stuttering? the phone seriously seems to have trouble loading the phone app quickly enough when a call comes in, sometimes it even says "unknown caller" first before recognizing the number and showing the contact name.
Click to expand...
Click to collapse
Yes i have the same problems as you, more specifically:
1. Sometimes it rings just once and goes into "missed call" before I can pick up, and the caller tells me it rang many times and I didn't answer!
2. Unknown caller before the name is identified
3. HUGE fonts of the email header (From, Subject, etc).... I mean they take up half the freakin' screen. WTF?
1st ring cut off prob
gaz_az said:
I have the same problem with the ringtone. I use my own .wav file. I hope someone comes up with an answer, it is a pain ;(
Click to expand...
Click to collapse
If you are having problems that the first ring sounds a bit cut off, try converting the ringtone to MP3. I had the same problem with my ringtone (which was WAV). Then I converted it to MP3. The file now has become alot smaller in size (thus faster to load I think) and now my first ring sounds "whole" so to speak. Try it if you use WAV.
Please note that this problem does NOT solve the ringtone delay (it solves the 1st ring cut-off prob for me at least). The ring delay problem still exists after ringtone convertion to MP3 and as far as I know there hasn't been a solution for that yet.
ok, i have managed to get rid of the ringtune stuttering by converting it from .wav(150kb) to .mp3(30kb)
strange thing is i used the same exact .wav ringtune for a couple of years on my old Wizard and there was zero delay. which doesnt make any sense.
however, it still shows "unknown caller" sometimes before recognizing the contact name.
i am starting to think that the HTC phone skin is the culprit here, its simply making everything slow. i tried disabling it with Advanced Configuration but that renders the whole phone app unusable.
pulp said:
ok, i have managed to get rid of the ringtune stuttering by converting it from .wav(150kb) to .mp3(30kb)
strange thing is i used the same exact .wav ringtune for a couple of years on my old Wizard and there was zero delay. which doesnt make any sense.
however, it still shows "unknown caller" sometimes before recognizing the contact name.
i am starting to think that the HTC phone skin is the culprit here, its simply making everything slow. i tried disabling it with Advanced Configuration but that renders the whole phone app unusable.
Click to expand...
Click to collapse
I'm glad the file conversion worked for you too. That's right, it's not the wav file that is corrupt, I also used mine for years on my old PPC. It's that the Diamond somehow does have difficulties starting up certain "tasks" when someone calls. It could very well be the TFL3D interface... Even with all the performance tweaks, the problems exist...
Maybe you can try to use the phone option of WM instead of TFL3d? I dunno if this works (haven't tested it myself) but maybe if you remove the tick of the TFL3D in the Start -> Settings -> Today (Items tab) and then soft reset, maybe the TFL3D interface won't start. This way you can try if you have the same delay problem with the phone interface of Windows Mobile... This way we know for sure the HTC TFL3D interface causes the problem here.
pulp said:
ok, i have managed to get rid of the ringtune stuttering by converting it from .wav(150kb) to .mp3(30kb)
strange thing is i used the same exact .wav ringtune for a couple of years on my old Wizard and there was zero delay. which doesnt make any sense.
however, it still shows "unknown caller" sometimes before recognizing the contact name.
i am starting to think that the HTC phone skin is the culprit here, its simply making everything slow. i tried disabling it with Advanced Configuration but that renders the whole phone app unusable.
Click to expand...
Click to collapse
i can confirm that changing from wav to mp3 remove/resolve the stattering.
no more breaks after first ring...
pulp said:
i got a couple of issues:
- when someone calls, the phone seems to stutter and cutoff the first ring a bit. doesnt inspire confidence at all. the ringtone is the same file i used to have on my wizard and worked perfectly for years, so its not the file.
- the menu font size if ridiculously huge! i managed to make it smaller by changing the following registry keys:
HKLM\System\GDI\SYSFNT\Ht (from 1000 changed to 700)
HKLM\System\GWE\Menu\Barfnt\Ht (from 1000 changed to 700)
HKLM\System\GWE\Menu\Popfnt\Ht (from 1000 changed to 700)
and that brings the font size down, however the font glyphs like arrows/checkmarks/circles remain the same huge size. i attached a picture to explain.
how do i change the size of those glyphs?
Click to expand...
Click to collapse
Hello,
did anyone fpund a solution to bring ont glyphs like arrows/checkmarks/circles to a smaller size?
Greets, Peter
"HUGE fonts of the email header (From, Subject, etc).... I mean they take up half the freakin' screen. WTF?"
Same here: Any one have an idea how to change this?
SK TOOLS check it out, everything you need
zmob123 said:
SK TOOLS check it out, everything you need
Click to expand...
Click to collapse
My problem with the menu symbols else?
Peter
zmob123 said:
SK TOOLS check it out, everything you need
Click to expand...
Click to collapse
i have looked at http://s-k-tools.com/index.html?sktools/m_feat.html there is nothing about font sizes, am i missing something?
@Tolar
i still have not found a way to make those glyphs small either, hopefully someone will figure it out eventually.
Hi
I just downloadet the programm "SMS reports eraser" from here: http://www.jgui.net/black/smsreportseraser/index.html
The problem is, that option "no sound" doesn't function on my diamond. I hate this sound on sms-delivery-reports ;-)
Can anybody help?
Use Schaps Advance Config instead
http://forum.xda-developers.com/showthread.php?t=317070
I'm author of SMS reports eraser.
Could you export and send me the registry of HTC Diamond? I will fix.
For now, you can just manually delete two sound files SMSREPORT... wav from root Windows directory.
to teddyen66:
I'm not sure, but the following:
"Use Schaps Advance Config instead
http://forum.xda-developers.com/showthread.php?t=317070 "
does not make, what my small apps does.
JGUI said:
I'm author of SMS reports eraser.
Could you export and send me the registry of HTC Diamond? I will fix.
For now, you can just manually delete two sound files SMSREPORT... wav from root Windows directory.
Click to expand...
Click to collapse
Hi
There are no souch soundfiles in windows root directory...
I think the problem is, that delivery-reports have the caracter of a normal sms. And because of that, the sound appears. Erasing the corresponding soundfile may not be the solution because then, normal sms will also play no sound.
I try to export the registry this evening. If anybody else could do this, I would be very happy
Regards
if you instralled from my original setup file: exe or cab (directly from my above link web page)
and if you still hear the special sound prior to the default notification, you use for notify about new sms...
that means, absolutely, you have two SMSREPORTERASER1.wav and SMSREPORTERASER2.wav files in Windows directory.
because this soud file is listen. and because my setup file installed/copied these files there.
probably you have locked the view of some files inside \windows folder.
don't afraid to delete these sound files, because it does not use as the default notification about new sms or something others. these files are used by my program only.
JGUI said:
I'm author of SMS reports eraser.
Could you export and send me the registry of HTC Diamond? I will fix.
For now, you can just manually delete two sound files SMSREPORT... wav from root Windows directory.
to teddyen66:
I'm not sure, but the following:
"Use Schaps Advance Config instead
http://forum.xda-developers.com/showthread.php?t=317070 "
does not make, what my small apps does.
Click to expand...
Click to collapse
No my mistake, in Advanced Config you can only turn sms notifications/reports off.
Sorry
Doesn't work for me too.
I have an WM6.1 ROM.
Normal SMS sound is the same has delivery report. No changes.
Did two soft reset... And it's the same.
Cheers
Working Ok on my Wizard, sound and delivery report to read
Installed in the SD Card
ps: Since this is generic app, I think that should be in the Development area ?
no, I think these theme should be in this thread ;-)
I hope the developer finds a solution soon, because this sound of sms-delivery is really annoying...
But did you noticed any changes or is the same sound has before?
In my case, i stayed with the same sound has before... Nothing changed...:S
Cheers
The only sound that you may activate or not, is the Woman/Man annouce, the other sound is the common sound of an SMS arriving, that probably you may change in Sounds and Notifications
I've mentioned that this app should be moved to Development area, since it is aplicable to any other devices
Pisca said:
The only sound that you may activate or not, is the Woman/Man annouce, the other sound is the common sound of an SMS arriving, that probably you may change in Sounds and Notifications
I've mentioned that this app should be moved to Development area, since it is aplicable to any other devices
Click to expand...
Click to collapse
No. The other sound should be "No sound" and it's not working... That is what i was saying.
Cheers
Yesterday i've uninstalled the aplication, but today when i wake up it said "Cannot run windows/smsreporteraser.exe"
When i installed it i configured to erase all reports at 6 a.m..
Now i've changed the clock to 5.59a.m but there was no message.
Hope it was only once...
Cheers
EDIT: Tried again with thw woman sound. Now it's playng the woman sound and then plays normal sms sound...:S
Cheers
I should clearer explain how this program works.
It tries to recognize, if the received SMS message is the delivery report.
If it is a report, it will play own sound (woman's, or man's, or nothing), and then allows system to process default Windows Mobile "new text message" notification. This one what you set in system's default Settings Notification dialog. There's no common between default system's notification and my program. My program just hold default notification (if this is a report message) for the time of own process, and then release it in normal way. Also, it set the timer to run deleting of all reports, in the specified moment in the future. If this moment will become, it will delete all reports in Inbox. This moment is calculated from the last received and recognized report message.
FOr example, you sent one SMS at 13:45 and then received report at 13:46. If you set the deleting time in my program to "2 hours" you can expect the report will disappear at 15:46.
But, if in the meantime, you sent some other SMS message, and got next delivery report, for example at 15:10, you should expect both reports will disappear at 17:10.
I think (and tested) this idea, these rules, are "logical", and very usuful for daily activities.
It's enough conveniently way to control, what your message was delivered, and what not.
IF you want to hear woman's or man's voice notification, it will play before the system's notification, but ONLY if: you set ring sound, you set "new text message" sound, and you set volume greater than zero. This prevents from hearing the sound when you use "silence" profile, vibrate only, or something like this. I've decided to include such rules, because different devices organize and use "profiles" in different ways, if any at all: most Smartphones use profiles, but not all touch-screen devices use. So my program checks the volume of notification sounds and ring sounds, to be sure you will not hear anything when you in the dark cinema. If you have better idea how to prevent the hearing in various types of mobile devices, please share.
So, if you use 6a.m. time for deleting, and even if you will uninstall this program, the timer will run up to this moment, and try to execute = delete reports. Only once.
There is no way to break the timer. What for?
Alternatively you can only use some special program, where you can review all your system's timers of notifications, and delete SMSREPORTSERASER manually.
... still awaiting for someone who send me HTC DIamond registry exported copy.
What I have to review inside, to fix sounds problem in this device.
I thought that we could have only your sound when receiving a delivery report.
When i receive a delivery report i ear both sounds (male/female) and normal sound, one after the other, and thought that was a bug.
Thanks anyway
Cheers
do you think, I should add option "not play the default sound notification" in case of delivery report received?
Yes! I think think that should be a good modification to the program.
Also think that mutch people whould apreciate.
Please do!
Cheers
JGUI said:
do you think, I should add option "not play the default sound notification" in case of delivery report received?
Click to expand...
Click to collapse
That would be perfect!
I just tried out your app, and it works very well. Cleared out yet one more problem from the Diamond!
But that last option you mention - that would fit very well imo.
I would really appreciate too....
could somebody send the registry-file to the developer of this appl.? Unfortunately I am to dumb to do this :-(
ok. I added the option "don't play default notification".
if you use such option, the systme's popup notification or sounds will not in use when new delivery report will arrive.
please redownload the new setup file, re-install, and - don't forget - make a soft-reset.
This is a collection of registry tweaks to allow greater control over the notifications in WM, including the ability to prevent repeating sounds for reminders. What it does is enable the controls in "Sounds & Notifications" that are normally unavailable for several types of notification.
It's a further enhancement of Juggalo_x's enhanced notifications, which has never been updated or particularly well explained (at least not on this website!) ... I have also included the low battery tweak, as suggested by juiceppc in that thread.
Large credit goes to fredjones32 for this guide with an explanation of the registry values and how the repeat check box can be enabled.
These are the notifications included:
ActiveSync: Begin sync
ActiveSync: End sync
Beam: Autoreceive
Connection disconnected
Connection established
Low battery
Messaging: Downloading MMS
Messaging: MMS downloaded
Messaging: MMS sent
Messaging: New e-mail message
Messaging: New MMS
Messaging: New MMS report
Messaging: New text message
Messaging: Sending MMS
Phone: Missed call
Phone: Voice mail
QuickGPS
Reminders
Wireless network detected
NB: Installing this CAB will turn off all notifications for all of the above events. If you go into Sounds & Notifications you will be able to turn on the ones you want again. This happens because the 'repeat' checkbox cannot be enabled without changing the registry value that controls which notifications are set. It is difficult to preserve the previous values during a simple CAB installation - but if anyone knows of a way please let me know. Detailed settings, for example sound file names, are not lost.
thanks mate
Hi Dave!
Thanks for this great piece of enhancement for all of our diamonds
I'm going to look into it!
Have a great weekend
Regards
Jeroen
Thanks Jeroen, let me know what you think.
you have a good one too!
Davey101 said:
Thanks Jeroen, let me know what you think.
you have a good one too!
Click to expand...
Click to collapse
Hi Dave! Thanks for your reply
I tested it yesterday...it's working great, except for one thing
I'd configured the notifications for text messages. I used the option repeat which was also available, so than I wont have to miss the alert about my messages...
But what happened, I heard every ten seconds my alert, I opened my message and It just went on and on and on....even though I already opened and read my text....that's quite strange/odd.....(hope you'll understand what I mean)
Did you had same behaviour on your device??
For the rest..I really really found it useful!
Many thanks again and I hope everybody is going to like it, just as I do!
Cheers
Jeroen
Hi Jeroen,
I don't use the repeat setting - I was mainly interested in being able to turn the repeat off for reminders! I use SPB Phone Suite on my phone, which allows you to configure sounds that repeat every few minutes until the original notification has been dismissed. The beauty of that system is that it is all configurable by profile, so when the phone switches itself into night mode the repeating sounds are turned off. It's not free but there must be some alternatives.
I've just had a play with the normal repeating sounds and you're right, they're particularly ****ing useless.
thanks I really needed that
Davey 101,
Thank you for compilations.
Davey,
Thanks for this application. I've used a couple of your applications/suggestions before (I can't remember which one - bluetooth perhaps) and they all work great. Thanks for your great contribution.
By the way, I have installed this and it works on WM6.5 too.
Galvatron said:
Davey 101,
Thank you for compilations.
Click to expand...
Click to collapse
mitsi said:
Davey,
Thanks for this application. I've used a couple of your applications/suggestions before (I can't remember which one - bluetooth perhaps) and they all work great. Thanks for your great contribution.
By the way, I have installed this and it works on WM6.5 too.
Click to expand...
Click to collapse
Thanks, that means a lot.
thank you for developing this. now i won't have to go climb a bell tower. those repetitive reminders were more than just annoying while i was on a call driving and couldn't shut it of.
thanks again.
Turn off led
Davey101 how to turn off led light notifications, because this .cab is only unblocking options
any-way of making this work when phone is turned to vibrate mode? works great when phone is in ring mode for me!
Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.
Same problem here, but with new MMS. SMS notification works normally.
MMS work with the new ROM.
But the MMS notification has no sound and no vibration, even if checked in the settings.
me again
I just found out that the same problem happens when I get a new Email message - the device makes lights but no sound even though I set it to at the events area in windows mobile settings. When I press the play buttin there it playes the sound perfectly.
HELP PLEASE
Had the same problem, I managed to set an inbuilt ringtone. Maybe it is not as good as my own, but at least I can hear anything. Search for it.
Is the Wake up from new SMS enabled?
it is enabled
maurophp said:
Is the Wake up from new SMS enabled?
Click to expand...
Click to collapse
yes it is, but it does not seem to be working.
when i get a nes sms or email the phone just lights its round button.
and i am using a builtin ringtone. it calles Alert-Glass2
maurophp said:
Is the Wake up from new SMS enabled?
Click to expand...
Click to collapse
where can i enable wake up on new SMS?
murata said:
where can i enable wake up on new SMS?
Click to expand...
Click to collapse
you need diamond tweak for that - but as i said, it doesnt seem to work
help
ididid said:
Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.
Click to expand...
Click to collapse
Please Help ME...
ididid said:
Please Help ME...
Click to expand...
Click to collapse
I had problems with AZTOR rom and now i using Vic rom and i have no more problems with SMS.
maybe you can also try it.
rom cahnge
Cant change rom. If ill do it i will lose my importer warranty.
ididid said:
Cant change rom. If ill do it i will lose my importer warranty.
Click to expand...
Click to collapse
could you tell us wich rom version you are using at the moment
I am using Alarm4 if this does matter.
Tried my procedure?
kosherpig said:
1. Open TF3D Settings tab
2. Choose Sounds
3. Toggle last option two times (so it goes back to your current passing another)
4. Click More (right softkey)
5. Go to the second tab
6. Choose New SMS sound
7. Select some inbuild ringtone
8. Click OK
9. Repeat steps 4-8 skipping step 7
10. Test it.
Click to expand...
Click to collapse
me again
murata said:
could you tell us wich rom version you are using at the moment
Click to expand...
Click to collapse
ROM: 1.93.456.2 WWE
date: 7/10/08
ExtROM: 1.93.456.21
sorry for my bad english...
actually, i ever had this problem before, it is:
in the events area in windows mobile settings. if you press the play button, it playes the sound perfectly, but when a message is received, there is no alert sound...
that's because i changed the sms mode from "chat mode" to the traditional one (i just don't know how to express this, but i think you can understand) and when i change this back to normal, the sound comes back again
hope this can be helpful
Are these not working ringtones in MIDI format?
Just noticed setting a certain MIDI ringtone makes all MIDIs for this event fail.
(I switched to WMA and I am happier than with MID )
enable vibra
ididid said:
Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.
Click to expand...
Click to collapse
TRY: settings --> sounds¬ifications --> notifications (tab) --> Event: Messaging: New text message and check the "Vibrate" checkbox. Worked for me after updating rom 1.97 to 2.03