Even on my old phone, I used to enable the serial port in the hope sound would when the BT source is selected would come out of the car stereo - but it never worked
However, today i selected BT via the car stereo and volia it starting streaming from my handset, whenever I switched source, the phone track paused - awesome
Does it resume streaming after turning the engine off and back on?
Yes
Be interesting if others can try and report back, asked a friend with a Diamon 1 to try, did not work, handset wise i can't see a difference must be related to the car stereo, mine is Sony branded.
I'll be giving this a try when I get my handset (should be in the next couple of days).
I'll be using it with a JVC head unit and BT addon.
Battery drain
I've noticed everytime i get in hte car now my media player starts (well stays paused), i thought since its paused no issue.
But i got in the car with 42% battery, got out after 40mins, and had 22% !!!
I cannot seem to stop the car stereo connecting by disabling some of the 3 options:
1. Serial port;
2. Wireless stereo
3. Handsfree
If i disconneect serial port, it still plays, if i disconnect wireless stereo then bluetooth won't bond ... any ideas to stop the BT streaming to the car stero
Related
i have the vario 3 phone and have just been and bought a sony bt2500 car stereo which allows handsfree calls and also wireless music streaming via bluetooth from my phone. the handsfree works fine but when i turn off the car ignition i have to manually connect my phone again to the stereo so i can stream my music to the player, i know its not a big problem but its a bit of a pain in the ass, i was just wondering if there was way for the phone to recognise the stereo for wireless music streaming like it does for the bluetooth hands free calls as this connects automatically when i turn the stereo on. hope you can help me,.. thankyou
ive been wanting to stream music to my mates car sytereo when im in his car, but im not sure how its done with this phone can someone guide me
btw id prefer to use s2p as an interface as im sure its usable
I don't what s2p is but I stream to my stereo headset - no problem.
I can't imagine it being any different than setting up a headset. Put the car's bluetooth in setup mode and tell your phone to do a new bluetooth connection.
And if the car doesn't have built in BT, then you would need something like this>>>
http://fmbluetooth.com/
There is a thread for this already:
http://forum.xda-developers.com/showthread.php?t=403795&highlight=bt+stereo
I tried wired w/ the usb adapter before but I am using A2DP for wireless streaming. (Was using Sony DS-220 because it allows battery charging whle playing but recently change my head unit to JVC BT-1 with build in BT support)
You may want to read this thread as well: http://forum.xda-developers.com/showthread.php?t=382172&highlight=a2dp&page=2
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Sounds to me like it's an issue with the stereo, not the Kaiser.
Perhaps try disabling the handsfree service (for that pair) on the Kaiser? I can't remember exactly if you disable certain services.
cotc2001 said:
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Click to expand...
Click to collapse
I have an XCarLink and I have the same behaviour which is a bit annoying. I did a bit of searching a while ago but never got anywhere. If there is an (easy) answer to this I would be interested.
Andy
No it's def not the stereo , i've got it working sort of using A2DP toggle but it's not automatic.
Installed A2DP toggle and linked it to the audio manager on the kaiser.
So I just click the play button on my home screen and it kicks in the wireless stereo and launches the audio manager at the same time and it all works.
It's just annoying as I know that before I moved the stereo from my Honda civic to my hyundai Coupe all I had to do was just start audio manager and the wireless stereo kicked in automatically.
I've seen this too; I have a Sony BT5000 (basically the same as the OP), and I've seen it with both Wizard & Kaiser devices.
A bit more testing - expected behaviour?
I went out in the car earlier and had to do the 'set as wireless stereo' trick to get the BT streaming working with the XCarLink. When I switched off the engine and the head unit powered off the headset icon disappeared from the phone (which is normal) indicating there was no connection. I then left the car but left the bluetooth enabled on the phone instead of switching it off as I normally do. When I returned and drove off the partnership was re-established and the headset icon re-appeared and I was able to stream music etc without doing the 'set as wireless stereo' trick.
I tested this a couple of times and the behaviour was the same - i.e. leave BT enabled on the phone but switch on/off the XCarLink (car kit) and the partnership re-establishes each time with Wireless Stereo working. Switch BT off and then back on on the phone and you have to manually select Wireless Stereo.
Is this the expected behaviour or is there a trick to getting this working seamlessly?
Andy
That didnt' work for me. I even did a hard reset on my phone to see if there was something I had installed causing it not to relink.
If I had any hair, i'd be pulling it out by now
It's so frustrating knowing that I had worked it out once before but when it comes to the crunch you can't remember for the life of you how you did it.
Well i've been searching for an answer and found this here
http://forum.xda-developers.com/showthread.php?p=1318542#post1320648
@ debully>
There is a very simple fix to enable the Pioneer to recognise and connect to your phone. You see the Pioneer is searching for a phone or a Smartphone, the Trinity identifies itself as a PPC and so the Pioneer ignores it.
The Class of Device or CoD must be changed so that the Trinity identifies itself as either a phone or Smartphone.
If you change the Dword Data value in.... HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S\COD"
to 5374476 (decimal) and set bluetooth to discoverable in your Trin, you should find that it connects automatically.
It took me 8 months to find this out.
PS. I don't have the problem with not hearing the callers.
Click to expand...
Click to collapse
But it didn't work for me - on the plus side though I did find a really cool mortscript from the same guy which when I plug the kaiser into my car cradle/charger it recognises the car stereo (but doesn't set to "wireless stereo" and automatically loads up my media player
My search continues
EDIT: Ok found that once the initial partnership for wireless stereo is done, if I turn off the radio and turn it back on again, the partnership is lost as usual until I press channel 6 (pause) on my head unit and then it comes back on.
I have a stock T-Mobile Vario-3 from first release, no ROM updates, and I have an odd problem when connecting it to my car stereo via Bluetooth. Initially I thought it was a bug with my Pioneer head unit, but I've just got a new car and it's doing the same thing with the Renault factory-fitted unit.
When the (already paired) phone auto-connects via bluetooth, the car stereo reports that it is dialling the last number - although the phone does not actually dial, and the phone itself continues to work normally as if it is not connected.
If I reboot the Vario the problem seems to go away until after I have made another phone call, and then the problem returns again. On the old Pioneer head unit I could just cancel the 'phantom call' by selecting back to the radio or CD input, but on the new Renault the only control keys that work are volume, so I have to disconnect and reset the phone again to get it to connect correctly.
Once I get past this glitch, everything works perfectly - good stereo audio output for my MP3s with playback-control via the car's buttons, hands-free phone use, accessing the phone's Contacts directory via the car controls, etc.
Does anyone else have this problem, or know of a proper fix?
Or maybe someone is telling me that I really do need to get a Touch Pro 2....
Andre
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I think the answer lies in the question here,, Parrot Bluetooth Media Connection.
The stereo isn't 'smart' enough to determine that what is connecting to it is a Phone/MP3 and as such you wont be able to split the audio to have the phone play music and the Stereo take calls, it'll end up being one over the other.
One way around this would be to test with a completely different Bluetooth Headset to see if this allows music to be played on the Device and Calls to come through on the Headset,, failing that its going to have to be a potential dev jobby to split how the device sends its audio and to what specific device,,, if that lies with HTC and Android/Us or Pioneer/Parrot themselves,, might be worth asking whats the official standpoint on this with the Manufacturer and see if they are getting this same issue from multiple folks
uConnect and Bluetooth Media
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I have the same problem with my HTC One across four different ROMs, two GE and two Sense.
It's NOT an issue with my car stereo (uConnect system) as it works flawlessly on my Nexus 7 and VZW Galaxy Nexus. I prefer to have media (music, Ingress etc...) play over the phone. Only thing I want to play over the uConnect is the actual phone. No matter how many times I unselect media in the bluetooth settings it selects it again.
I see this is an old thread, anyone have any ideas?
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
deadman3000 said:
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
Click to expand...
Click to collapse
I've just installed Bluetooth Auto Connect have to go run some errands in a little while, I'll let you know if it helps out managing profiles or not.
If it works let me know what settings you used as I don't understand all the options lol.
bluetooth problem
Hi developers: Thanks Team Venom for a great ROM. I have only one problem. Rom 2.7 no problem with Bluetooth in the car. 3.1 Installation of clean and dirty disables bluetooth. Ten seconds connected and then disconnected. Again, connects and disconnects. So it all over again. It is in version 3.6 ... any change BT software? You can install the software separately BT? Or any other advice? Thank you very much
edit: I deleted the original settings in the car. Again the connection and still the same problem.