Hey guys,
I've read through the forum and I got confused
Some people say we have a blue led indicator for bluetooth, some people say its only a bi-color LED (green and orange)..hhmmm..
the question is: Does Topaz have a blue LED indicator ?
if yes how can you set it up, so when ever your BlueTooth is on the LED indicator Flashes, or is On until bluetooth turns off
Thank you for the help
There is no blue LED indicator for bluetooth, so there is nothing to set up.
damn..
Thanks for the reply!!!
shuflie said:
There is no blue LED indicator for bluetooth, so there is nothing to set up.
Click to expand...
Click to collapse
realy? I'm shure, the left led is a multi-color led that also can "blue", so it is a question of software & programming. But i dont know we are able to change this settings. May be in the future, with new ROM's ?
Sorry for bad english, i hope you can understand it...........
By
Ferbie said:
realy? I'm shure, the left led is a multi-color led that also can "blue", so it is a question of software & programming. But i dont know we are able to change this settings. May be in the future, with new ROM's ?
Sorry for bad english, i hope you can understand it...........
By
Click to expand...
Click to collapse
I'm using a small software on my Blackberry which is changing led color depending on the event. You may customize as you wish (for those who wants to know, this soft's called berrybuzz)... For example, blicking green when you got sms, red when it's a mail, purple for missing phone calls, blue when bluetooth, etc...
That would be fantastic if we only could port that on our devices... But not sure the led is multi-color.
Ferbie said:
realy? I'm shure, the left led is a multi-color led that also can "blue", so it is a question of software & programming. But i dont know we are able to change this settings. May be in the future, with new ROM's ?
Sorry for bad english, i hope you can understand it...........
By
Click to expand...
Click to collapse
How do you know it is a multi-colour LED?
It would have been cheaper for them to use a single colour one
chch said:
How do you know it is a multi-colour LED?
It would have been cheaper for them to use a single colour one
Click to expand...
Click to collapse
hhmm, on low bat the led is "red" on full bat she's green. May be it is only a dual-color, but in the most htc-devices is biuld in a multi color (for example in prophet), so it makes my wonder, if not in TD2
I'm still hoping for a constantly blinking green "in service" light, I really miss this feature. If anyone knows of an app to do it, I'd be very grateful!
Related
One thing I really miss from my 8125 was the fact that when I had a missed call/email/VM/text, the amber LED would blink twice as fast as the regular green phone status light.
I know there are programs that will change the LED color for notifications on the Kaiser, but I would like to keep the current color configuration.
Does anyone know of a way in increase the blink speed of the amber LED when I have a missed call/email/etc.?
Thanks for any help.
i want to know this too , any1?
thnx
Yes, if you want to break your LED's you can do it
grizzley said:
Yes, if you want to break your LED's you can do it
Click to expand...
Click to collapse
as long as it's faster honey
definitely sounds good to me. missed calls having the delay between flashes decreased, or have it do double flashes. maybe the occasional beep or vibrate depending on setting for missed calls / texts
ziddey said:
as long as it's faster honey
definitely sounds good to me. missed calls having the delay between flashes decreased, or have it do double flashes. maybe the occasional beep or vibrate depending on setting for missed calls / texts
Click to expand...
Click to collapse
Well, it will break your LED's so in the end you have NO flashing LED's or sometimes LED's or wrong LED's. So, search, there are a few threads about it. They will be faster, but only IF they work. I haven't seen anyone that has gotten it to work correctly, especially on the Kaiser.
I sure wish there was a good solution to this...on my HTC Apache/6700 whenever I had a notification the LED would be orange and would flash twice as fast. Considering that in certain light conditions it's difficult to tell whether the light is orange or green, having it flash twice as fast is the perfect solution.
true , now we need a solution for this
On my mio a701 i had this feature , it was usefull
Hockey37 said:
I know there are programs that will change the LED color for notifications on the Kaiser, but I would like to keep the current color configuration.
Click to expand...
Click to collapse
Do you or anyone else have a link to instructions on how to change the color? If I could change notifications to red it might be easier to see than orange. Afaik red is only for low battery anyways and my battery is never low. It's not possible to search for a 3-letter string like "LED."
Thanks
kaiser notifications
kaiser notifications
for color leads changing
thats only for colors , not for speeds
Hockey37 said:
One thing I really miss from my 8125 was the fact that when I had a missed call/email/VM/text, the amber LED would blink twice as fast as the regular green phone status light.
I know there are programs that will change the LED color for notifications on the Kaiser, but I would like to keep the current color configuration.
Does anyone know of a way in increase the blink speed of the amber LED when I have a missed call/email/etc.?
Thanks for any help.
Click to expand...
Click to collapse
led port is different in devices.
can it use at htc touch to change color ?
I almost trade in my cruise, but I noticed that the LED on the earpice does not blink..we tried to plug the charger, does not turn orange or green..so I back out..the store dont want me to open a second one.
I saw a guy buying in Fortress (in HK, it's been here since last Friday), and it does not blink as well... well but it really looks like a LED on it..
looking for the brochures.....to check
Sure it's not just the light sensor?
It probably is, the scroll weel thing seems to do all the blinking.
its definitely a light sensor
Cheers
LB
Yes it’s a light sensor. I mentioned this in an earlier thread. It allows the backlight to adjust automatically to its surroundings.
Sorry evryone..just got mine...
It is the light sensor...too much on my Cruise...
ok, so there is no led on the diamond? that s not common for an htc, and that s not very convenient to know if you missed some calls or if your device if fully charged etc
bobcntsa said:
ok, so there is no led on the diamond? that s not common for an htc, and that s not very convenient to know if you missed some calls or if your device if fully charged etc
Click to expand...
Click to collapse
Lol there is an array of lights around the directional control. It lights up veyr nicely, and much more noticeably than the tiny LEDs on previous HTC devices. It glows with a slow pulsating when charging, and flashes when there is a missed call or SMS (according to your preference settings).
"It glows with a slow pulsating when charging" and when charging is over it stops pulsating or is a solid light ?
webvan said:
"It glows with a slow pulsating when charging" and when charging is over it stops pulsating or is a solid light ?
Click to expand...
Click to collapse
yes, solid light when fully charged
thanks, seems smarter than the good old green/orange led !
webvan said:
thanks, seems smarter than the good old green/orange led !
Click to expand...
Click to collapse
It's smarter and it blends in very nicely with the look of the phone.
Very nice at night when the phone is being charged in the dark
mkhattab said:
...Very nice at night when the phone is being charged in the dark
Click to expand...
Click to collapse
oh boy, i love this one, it looks like it inhales the energy. It's alive!!!
Let's be careful, it could be HAL !
And how u know if the phone is still on ?Is there no option to make the joistick blink while in standby?????
Pull out the stylus. If it's on, the screen will turn on.
webvan said:
thanks, seems smarter than the good old green/orange led !
Click to expand...
Click to collapse
especially for the color blind folks like me. i could never determine whether my device is fully charged without turning on.
thanks to htc, i can do that now...
Just got the new phone today. The LED lights aren't switched on by default. So when the phone is charging, have bluetooth switched on, missed calls etc.... nothing
In the sounds and notifications setup the tick box for the light is greyed out. Is there a registry setting to turn them on, or is my phone faulty ??
gaz_az
Do you mean the circle LED? Reading the manual they should flash or spin in a circle depending on whats happening. there is no Bluetooth light from what I can tell.
rolandrat said:
Do you mean the circle LED? Reading the manual they should flash or spin in a circle depending on whats happening. there is no Bluetooth light from what I can tell.
Click to expand...
Click to collapse
No not the circular light it works ok. There appears to be a small LED up beside the speaker (where your ear goes). It's not doing anything !
It's light sensor
tnacar said:
It's light sensor
Click to expand...
Click to collapse
Seriously !!??
I sort of miss the multicoloured flashing lights. Ah well
gaz_az said:
Seriously !!??
I sort of miss the multicoloured flashing lights. Ah well
Click to expand...
Click to collapse
yes its the autobacklight sensor
gaz_az said:
Seriously !!??
I sort of miss the multicoloured flashing lights. Ah well
Click to expand...
Click to collapse
lol
Loads of people seem to make that mistake. I haven't actually bothered to take a good look at that area in the pics available on the internet - I probably should...
gaz_az said:
Seriously !!??
I sort of miss the multicoloured flashing lights. Ah well
Click to expand...
Click to collapse
there are no "connectivity" indicator LEDs - ie WLAN BT Phone etc. only the indicator LED for missed call, unread email sms.
These changes have been merged into the latest nightly. Expect to see it in the new dinc build on 11/30/2010.
-------------
Hey fellow dinc users. We've been complaining for too long and now we can complain no more (or some more)
I've made a patch that fixes the led notifications so that green and amber blinks now. You can flash this over any version of cm 6.
The led blinks like stock, but the blink rate is not configurable.
-Flash in succession works for different notification colors.
Flash like any zip. Be sure to back up.
Bug: There seems to be an issue with the led light colors not being properly set by CM settings.. Here is a possible solution:
tdiman said:
Next: Bingo:
Set a custom color (somewhere in the pink-red range). Got a red LED immediately.
Now flash color, blink rate work as advertised.
Hopefully that helps narrow down the issue me and CUViper are seeing.
Click to expand...
Click to collapse
Devs: I've started a Gerritt issue for the fix. I'm not sure if I broke things for other phones.. so hopefully there'll be more contribution from other devs to get this into cm6.1..... update- they didn't like my generic liblights fix, so I've made a device specific one for our inc. It works right now, but I will clean up the file when I get a chance.
http://review.cyanogenmod.com/527
NEW: http://review.cyanogenmod.com/#change,681
Do you think this will work with RUBY?
shoman24v said:
Do you think this will work with RUBY?
Click to expand...
Click to collapse
I think it should. But please let us know if it doesn't!
Let me do a backup and I'll try it out.
nice.. much appreciated! what's left in terms of issues? just the cam force close or are there others? once the cam's fixed.. i'd like to use cm as my daily
The camera really only fcs for 720p recording with autofocus. I might look into it over Thanksgiving.
The led issue was just really bugging me and I was getting impatient lol..
No, go. When I get a text it doesn't blink, or even stay on like it did.
shoman24v said:
No, go. When I get a text it doesn't blink, or even stay on like it did.
Click to expand...
Click to collapse
Sorry man, there must be other changes in Ruby that I don't know about. Have you tried changing the colors of your notifications? The driver only responds if it's green or red.
seanzer said:
Sorry man, there must be other changes in Ruby that I don't know about. Have you tried changing the colors of your notifications? The driver only responds if it's green or red.
Click to expand...
Click to collapse
I don't believe Ruby allows you to change the color of your LED. We only have two anyway
shoman24v said:
I don't believe Ruby allows you to change the color of your LED. We only have two anyway
Click to expand...
Click to collapse
You should try an led tester or handcent. An app that lets you change test the color of the led. I could recode the patch to default to green for all other colors, I believe that would make it work for MIUI. Pm me if you're willing to try it..
I think many users may want it blink for Ruby. Though, it does work just fine as it is being only solid. Reason I sorta perfer that is I'm not being tricked into thinking I have a notification. When it blinks I have to always take a second look at it
I tried LED Tester, only colors we have are green and red.
For the apps that have built in LED configuration, like handcent and kik. THey wouldn't even have the orange LED blinking right, which leads me to have it set to no blind in CMsettings and the app settings.
Will this fix work with those aswell?
mikeymop said:
For the apps that have built in LED configuration, like handcent and kik. THey wouldn't even have the orange LED blinking right, which leads me to have it set to no blind in CMsettings and the app settings.
Will this fix work with those aswell?
Click to expand...
Click to collapse
I'm not sure what you mean, but I can use handcent's settings to set the led color. Only green and red work though. For the apps that don't have a way to set the color, I can control it using cyanogen's settings under the led notifications menu.
I added some review comments in Gerrit for you. When I tried it myself, I wasn't able to get it working until I uncommented your BLINK_FILE writes.
This b0rks the green LED when charging above 90% Now both orange and green are lit.
Also rather then plain green flashing I get nothing :/
CUViper said:
I added some review comments in Gerrit for you. When I tried it myself, I wasn't able to get it working until I uncommented your BLINK_FILE writes.
Click to expand...
Click to collapse
When remove the comments, don't the blinks go sporadically?
I intended for the leds to be able to have both red and green, but it looks rediculous so I'm going to fix it.
seanzer said:
When remove the comments, don't the blinks go sporadically?
Click to expand...
Click to collapse
I'm not sure what you mean by sporadic. It's a quick blink about every two seconds, longer off than on. But with your comments in place, I don't get anything blinking lights at all. The solid charge light works, but blinking notification doesn't.
CUViper said:
I'm not sure what you mean by sporadic. It's a quick blink about every two seconds, longer off than on. But with your comments in place, I don't get anything blinking lights at all. The solid charge light works, but blinking notification doesn't.
Click to expand...
Click to collapse
Interesting, try setting different blink rates, it definitely works!
I'm posting a new version fixing the issue with both lights showing up.
Ok, this is weird. I built your second patch from Gerrit, pushed it out, rebooted, and then suddenly I was getting the opposite of before, now a long blink on with a short off. So I went into Advanced and chose "Reset all colors and apps", and now I can't get anything to blink at all. I'm about to give up and let you and others figure it out...
Can you tell what all the settings are for you? I have only the default "Miscellaneous" category, and I've tried "Always pulse" on and off. The other Advanced settings don't look like they should matter, but I have the rest all off. Then I go into the applications list and choose Gmail, set it to green or red, choose any blink rate, and then "Flash test" does nothing.
You should get a long blink with short off..
I just repeated what you did..
Reset all notifications,
Goto led settings for gmail,
Test flash does nothing,
pick green..even though it was already selected...
Test flash and it worked..
Not exactly sure why it doesn't work for you. lets see what the others say.
SO i have had a desire hd and oh that the charge led flashes green if the phone is on. Is something similar available for our nexus 1's?
PS: Please excuse my rubbish english.
IIRC there's an app that utilized the charging LED. I'll have to search for it.
baseballfanz said:
IIRC there's an app that utilized the charging LED. I'll have to search for it.
Click to expand...
Click to collapse
And? Did you find it?
race55 said:
And? Did you find it?
Click to expand...
Click to collapse
I know for a fact that Light Flow can control the charging LED.
Just tested it quickly; in 'Direct mode' with notification 'Phone signal' enabled, the charging LED is solid blue (I chose blue color).
You can choose blue, green, red (isn't working for me), orange, turquoise (=light blue), purple (=blue) and white (=pink)
Blink does it too. There's another one posted here somewhere I haven't foound.
https://market.android.com/details?...lt#?t=W251bGwsMSwyLDEsImltb2JsaWZlLmJsaW5rIl0.