I have already followed all steps from website, but still can't set the SPL.
Everytimes when X1 turn to 4 color bootloader mode, it will show no image, then back to 0% screen at last fail! Can anybody get help? Thanks a lot.
Hi there,
what do You mean by "finally fail"? Do You get a 262 error?
If so, I had the same problem. I disabled my anti-virus software, the firewall, disconnected all the unnecessary stuff from usb ports, tried different usb ports (and actually, differend PC)... and finally made it.
I really don't know, what such connection problems depend on. Maybe someone more experienced with rom updates will be able to give You more feedback. But I encourage You to keep on trying.
Good Luck!
pawartur said:
Hi there,
what do You mean by "finally fail"? Do You get a 262 error?
If so, I had the same problem. I disabled my anti-virus software, the firewall, disconnected all the unnecessary stuff from usb ports, tried different usb ports (and actually, differend PC)... and finally made it.
I really don't know, what such connection problems depend on. Maybe someone more experienced with rom updates will be able to give You more feedback. But I encourage You to keep on trying.
Good Luck!
Click to expand...
Click to collapse
Here is the answer take it from Blackstone kitchen:
Q: During the upgrade, the progress bar is moving. If the error message (ERROR [262] : UPDATE ERROR) appears, what should I do?
A: This may occur when the connection is lost, without power supply, computer host is down, or due to other unexpected cases. You will see that there’s still one progress bar displayed on the device but it is not moving any more. The device cannot get into the Wince screen, so you cannot connect with ActiveSync. This problem usually can be recovered. You just need to follow the instructions in the error message box, reset the device, and run RUU again. RUU will re-flash the whole image again.
Note: You should remove the battery and reset the Mobile Device.
Hope this help
Related
I tried to update my rom and it was working, until my laptop turned off. (I forgot to plug in the power cord). So I tried it again, and it was stuck in bootloader and so I tried to update it using a Official Cingular Rom. But it gives me an error 260 saying cannot connect. I then tried to use mtty (one of the guides on here) but there's no USB option. I tried this on 3 different computers. Any suggestions please?!
To access mtty with USB option, you need to kill the wcescomm process (or disable USB connection in ActiveSync).
Thanks for the reply but I did kill it and disable usb connections. Stll no USB shows up. Im using a pretty new laptop with XP
Are you sure your Wizard is in bootloader mode when you start mtty?
It's always in bootloader mode when it's on since the Rom Update Failed ( computer turned off).
I really don't know why I have this problem. It was working before, but then it failed, and now it wont connect
Try to flash it on another computer.
I suspect there are problems on the USB ports (And/Or software issues) of your computer...
In my first post I said I tried to flash it on 3 different computers ( I meant laptops.) I dont know why it wont work now though. It worked yesterday
If it helps before it gives me the 260 error it says my USB device is not recognizable.
Please, does anyone have anything?
Im getting realy worried and my warrantys expired
help me stuck on bootloader
what do i do when i downloaded mtty? im am stuck on the bootloader screen due to a 98percent error but right now i cant do anything but stay on the bootloader.
I downgraded so im back to
IPL 1.01
and SPL 2.25.
HELP me get out this screen please? I've tried almost everything i could search on this forum. thanks in advance. and thanks for the hard work on the great roms you guys have!
Is there any other way to revive my device? I've been trying for the past 2 days and it's still not working
TheTop- Flash a official rom to it
I have tried official Roms like the one from the htc website, should I just keep trying even if I get error 260?
dunno if it helps, but make sure that you're battery is charged at least 50%. It seems to be one of the requirements that are needed when you normally flash with the RUU after activesync hookup. I know that when I tried flashing below 50%, the program wouldn't work for me and boot out.
if it's below 50%, look for a friend to charge it and try again.
I posted this in the forum for the ROM but want to widen the audience. I am installing a ROM using RUU and keep getting communications errors. I have a partnership setup and it finds the phone perfectly. It detects the version and then reboots the phone fine. Both the PC and the Phone come up with the progress bar and sit at 0% for a minute and then I get a communications error and it fails. I tried this on an XP machine with activesync and on a vista machine with no luck. Anyone else ever had a similar issue with some ideas on what I can try?
Thanks,
Chris
tell me you have hard spl.
I don't actually but I did not brick my phone. I can yank the batter for a minute and then put it back in and it boots right back up. Could that utility make the communications issue resolve itself?
hardpl
Ok, I found this and it seems the process for installing this is the same as installing a new ROM and the communications issue happens here too. There has to be something simple I am missing. Anyone? Please!!
Hi there, I've been reading your forums since I got my diamond. You have done a great job here.
Until now, I have been able to learn almost everything I now from here. (I'm new to ppc). Nevertheless, I have come up with something I cannot resolve.
I had installed hard spl signed from olinex (1.30). And also upgraded my rom to 1.93 without any problem. But when I tried to do the same with the radio (I want to go from .05 to .08) I get 260 errors over and over.
I use Windows Vista x64 which seems to be problematic but for me worked at first. Anyway I also tried to run it on Xp and go 262 errors instead so no luck with that.
I have tried several things I've already read. Switching USB port, starting the flashing on bootloader, disabling advanced network functionalities from Usb to Pc, ...
The issue seems to be with my PC not dealing with the device when the tricolor screen appears. USB is written in the white band, and Vista seems to recognize an HTC usb device. But when I try to run the CustomRUU when already in the bootloader mode, the app doesn't even recognize the diamond.
Otherwise it recognises it, but when it changes to tricolor screen and the progress bar appears it gets stuck at 0% until the 260 appears.
I think I have run out of ideas right now. Could any of you lend a hand, please?
im pretty sure you need unsigned spl for flashing radios. i dont think radios are signed. i could be wrong, so maybe wait for some more replys before flashing. btw welcome
Thanks. I suppose I'll wait as you said but you are probably right about that. Anyway I suspect that sadly that's not the main problem. I have tried to reflash my rom, just for testing if it worked and ... 260 . Trying to reflash HardSpl or trying to install an unsigned version didn't work either. I've downloaded from different sources to make sure that the file being corrupted was not the problem. I don't know if I'm doing something wrong or I was just extremely lucky the first time it worked
Dear all,
i am having problem with fist time flash.
Thats what i do:
usb sync the device with vista (wmdc upadated)
run on pc Rhodium-HardSPL_V2_00R3 in automatic mode - nothing happen
run on pc Rhodium-HardSPL_V2_00R3 in manual mode - the device restarts and after three color screen (bootmode) goes to grey screen with with bar and stop at 0% same on the pc after a while on pc i got error 262.
I have tried all the suggestion exsplaned on Hard spl forums
but i am still stuck on it.
Please can you help me
On boot screen i see Rhod10032M spl-0.87.0000
Thanks in advance
same here...
I'm having the same issue. Trying to change the HSPL, get to that gray screen and it sits on 0%, nothing happens. I have an HTC tilt 2 with At&t
Also, not having any luck with the SSPL Manual instal on the device. I copy it over to the device, attempt to run it and the whole thing freezes.
same here, conencted, synced, and tried running the hspl file, get an error, d/led enablerapinew.cab, cant install it, winrar opens it up. havent tried manual mode yet, and i dont plan on it much yet.
Looks like you are having problems.....I would hard Reset it, then go here, http://rhodium.htc-unlocks.com/
Takes you step by step and if you get into a jam, he will help you out.
http://forum.xda-developers.com/showpost.php?p=5084595&postcount=1132
This has been the bible to flashing hardspl. Be sure to follow all the steps provided.
Which roms, radios are currently installed on the devices? Some additional info on the devices might be useful to aide in troubleshooting.
If all else fails do as Pumpiron has suggested.
Please post in the existing thread instead of creating a new one.
Dave
HTC Touch Pro2 (Boost) I put a Sprint TP2 on Boost mobile with the newest Energy ROM. Two days later, the screen went bad (not b/c of the ROM). I got a replacement phone and I cannot get it to unlock. I get errors (262 and 240) I have read for hours and tried several resets and still can't unlock the phone or maybe my terminology is incorrect? I cannot get the phone unlocked. I can't get Energy ROM to flash on this phone? Also, this phone runs out of battery power overnight without using it. HELP!
Johnhcfllc said:
HTC Touch Pro2 (Boost) I put a Sprint TP2 on Boost mobile with the newest Energy ROM. Two days later, the screen went bad (not b/c of the ROM). I got a replacement phone and I cannot get it to unlock. I get errors (262 and 240) I have read for hours and tried several resets and still can't unlock the phone or maybe my terminology is incorrect? I cannot get the phone unlocked. I can't get Energy ROM to flash on this phone? Also, this phone runs out of battery power overnight without using it. HELP!
Click to expand...
Click to collapse
error 262 means a USB connection problem - see Hard-SPL thread 1st and 2nd posts for USB connection troubleshooting tips.
http://forum.xda-developers.com/showthread.php?t=550131
I'm also curious...can't remember what error 240 means - what is the error text that goes with it?
ERROR [240] : FILE OPEN
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
Q: During the upgrade, the progress bar is moving. If the error message (ERROR [262] : UPDATE ERROR) appears, what should I do?
A: This may occur when the connection is lost, without power supply, computer host is down, or due to other unexpected cases. You will see that there’s still one progress bar displayed on the device but it is not moving any more. The device cannot get into the Wince screen, so you cannot connect with ActiveSync. This problem usually can be recovered. You just need to follow the instructions in the error message box, reset the device, and run RUU again. RUU will re-flash the whole image again.
Note: You should remove the battery and reset the Mobile Device.
Well I did that several times and keep getting the same error.
Johnhcfllc said:
Well I did that several times and keep getting the same error.
Click to expand...
Click to collapse
same? 240 or 262? for 262, did you check out the first two posts at the link?