Dear all,
i am having problem with fist time flash.
Thats what i do:
usb sync the device with vista (wmdc upadated)
run on pc Rhodium-HardSPL_V2_00R3 in automatic mode - nothing happen
run on pc Rhodium-HardSPL_V2_00R3 in manual mode - the device restarts and after three color screen (bootmode) goes to grey screen with with bar and stop at 0% same on the pc after a while on pc i got error 262.
I have tried all the suggestion exsplaned on Hard spl forums
but i am still stuck on it.
Please can you help me
On boot screen i see Rhod10032M spl-0.87.0000
Thanks in advance
same here...
I'm having the same issue. Trying to change the HSPL, get to that gray screen and it sits on 0%, nothing happens. I have an HTC tilt 2 with At&t
Also, not having any luck with the SSPL Manual instal on the device. I copy it over to the device, attempt to run it and the whole thing freezes.
same here, conencted, synced, and tried running the hspl file, get an error, d/led enablerapinew.cab, cant install it, winrar opens it up. havent tried manual mode yet, and i dont plan on it much yet.
Looks like you are having problems.....I would hard Reset it, then go here, http://rhodium.htc-unlocks.com/
Takes you step by step and if you get into a jam, he will help you out.
http://forum.xda-developers.com/showpost.php?p=5084595&postcount=1132
This has been the bible to flashing hardspl. Be sure to follow all the steps provided.
Which roms, radios are currently installed on the devices? Some additional info on the devices might be useful to aide in troubleshooting.
If all else fails do as Pumpiron has suggested.
Please post in the existing thread instead of creating a new one.
Dave
Related
Hello everyone,
First - I'm really happy to have found this resource. I had no idea about all the cool things I could do to my phone. Thanks to everybody for all your hard work.
I spent a lot of time reading up with the goal of upgrading to a Windows Mobile 6 ROM. But now I need some help please, because I can't get my phone back!
I determined that my phone is a G4 (IPL/SPL of 2.16.0001). I attempted to load various WM6 Roms (TNT 4.0 Official and XDA Mobile 6), without success (error 300). Eventually, I succeeded in loading Wizard Love 2.26.10.2, and booted into Windows successfully. I then tried to load TNT 4.0 on. It got up to 100%, rebooted - and now I am stuck on the RGB / bootloader screen. Plugging in USB cable gives me the USB txt in the bottom left, but no response from the computer. The various RUU utilities I have tried to restore the phone back to Wizard Love or official iMate ROMs all fail - they can't seem to find the phone.
I would greatly appreciate any help. Thanks you in advance.
Regards,
Nick
Progress!
More research led me to find that WinXP should be able to install a new ROM without ActiveSync - in fact, you need to disable ActiveSync USB connections and end wscecomm.exe via task manager.
These steps allowed me to attempt flashing of a new ROM:
1. Uninstall device from device manager
2. Turn off device completely
3. Disable USB in ActiveSync
4. End process "wscecomm.exe" via Task Manager
5. Plug in phone, windows will detect and install as a Windows CE. This will make wscecomm.exe load again. End this before running the RUU tool
6. Run RUU. When detecting your phone, it will run wscecomm.exe. I kept ending it and crashing the RUU . RUU stops it itself.
7. Finally my phone was detected and I was able to proceed to flashing without an RUU error. Previously, i was getting error 260, 264, 300...
I was greedy and attempted to load XDA Mobile 6. It got to 99% and crashed. I will try and get back to Wizard Love.
If somebody could tell me what I am missing / doing wrong that would be great. To summarise:
- I have been able to install Wizard Love
- I have a G4 i-mate KJAM
- TNT 4.0 has reached 100%. On reboot, I only got boatloader.
- After many hours trying to fix, I finally was able to attempt to flash XDA 6 r2. It reached 99% before crashing
I will now try to put Wizard Love back on, but I really want to run WM 6.0 and am not very concerned about which flavour. Thanks for your help
No...You shouldn't use RUU for upgrading to WM6 because your G4 is not unlocked (You need to pay to unlock a G4, however it is not required if you don't use RUU).
Flash to Wizard Love, then get a copy of ShellTool and use it to flash the nk.nbf inside WM6 RUU.
no worries. I have the same phone and running XDA r2a, so it can be done!
Simply get hold of G4_step_by_step_install_wm6 I think theres a link to rapidshare on this forum, try search. (I will try get the link later on.) Follow the steps and it has shelltool which will extract th OS for and you can then install. Make sure you get the splash screens from XDA thread so you get the full package.
Good luck
G4_step_by_step_install: http://rapidshare.com/files/22275022/G4_step_by_step_install_wm6.rar.html
link: http://www.megaupload.com/?d=VRYOZ4GO
Read this: http://forum.xda-developers.com/showthread.php?t=293480
You need this: ftp://xda:[email protected]/Uploads/WIZARD/Unlocking/ShellTool_bugfixed.zip
G4_step_by_step_install_wm6 will give u step by step guide on what to do.
Thank you
Hey guys - thanks so much, I can't wait to get stuck into it.
You know I spent my whole weekend getting into this stuff and I'm sure I have only just scratched the surface!
I think it's fantastic that so many of you put so much work into this, and then also have time to guide people through the process.
Regarding the FTP links throughout these forums - They never seem to work for me. I get an error 550 - failed to change directory. These are links with usernameassword of xda:xda. The only link that worked had something different, along the lines of xdaupload:xda, can't remember for sure.
What am I doing wrong?
Just get the G4_step_by_step, forget everything else. Its on rapidshare. It has even a WM6 Rom in it so you can even that on your Wizard. But you can install XDA R2a also by following the step by step guide and knowing what to replace. Have you downloaded it? Its about 75MB but well worth every bit of it! You wont need anything else after that.
We learn from each other! Thats why we help others so they help us too
cochumbo said:
Regarding the FTP links throughout these forums - They never seem to work for me. I get an error 550 - failed to change directory. These are links with usernameassword of xda:xda. The only link that worked had something different, along the lines of xdaupload:xda, can't remember for sure.
What am I doing wrong?
Click to expand...
Click to collapse
The forum carried many ROMs before. Micro$oft had some opinion on this and hence the ROMs were all removed. Most of the 550 errors would be due to this.
kernelguy
My phone won't take the flash of ANY ruus!
It gives me the same error with everyone of them. I've been trying for like two hours, it always says image is corrupted. so i redownload, re-extract. same problem, I've tried all the ones I can find and none!
it's hard to help if you dont give any info
phone-wing, p4350, etc
ipl/spl -number
did u hard spl your phone
did u follow instructions given here
http://forum.xda-developers.com/showthread.php?t=358225
you've been on the site for a while so i assumed you have.
list the steps you took when flashing
give out more info and i'm sure someone will help
Yeah I read all the posts but I was still a little fuzzy.
SPL4.10.0000
IPL4.10.0000
Tmobile Wing
First I Hard Reset my phone, put it into flight mode, and ran the USPL program
It gets all the way to the point where it's showing the progress bar, at 3% everytime, my phone resets and it says the image file is corrupted.
I re-downloaded all of them numerous times, used different programs to extract them, reset my computer etc. etc. etc. same thing every time
have you tried the link i gave you, i also have 2 wings and successfully did it with both using this method, the way to check your ipl/spl is press the soft reset with holding down the camera key until the colored screen shows up and you will see it then, to go back just press the soft reset button to boot back to normal, go see here
http://wiki.xda-developers.com/index.php?pagename=HTC_Herald
this is the best place to start, i've read through alot of these pages before flashing my first rom and i'm actually flashed 22 different roms over the two phones with no problems except the ones that need the keyboard fix. i'm still new to these phones as you can see in my sig but i'm trying to learn as much as I can since I wanna be able to cook my own rom, later.
What OS are u using on you're computer some people have been having problems with Vista there is also a thread on that
No I'm on XP, do I have to Hard-SPL? I think maybe that's the problem?
Voila! You're my savior! Thanks a lot! It's working fine now
Hi, Guys.
I've searched and read every related thread I could find about this, but I'm having no luck.
The details of the phone are:
R:1.14.25.24
G:52.64.25.34H
D:1.59. dutty
I've been trying to put WM6.5 R9 Turbo on it from http://www.duttythroy.net/
It would boot to the point where I'd tap to set up the + points, then I'd set a password etc.. But the graphics were still in 3 color mode, if I turned it off and on again, it'd show the full colours. I've reached the desktop before, with the new pretty icons and reached parts of the rest of the interface, but it jams and is very crashy...
Any ideas guys?
Thanks.
have not looked good ...
for the last rom you have to use HardSPL 1.56
http://forum.xda-developers.com/showthread.php?t=431217
So with my 1.14.25.24 Touch HD, should it be possible to put the latest WM 6.5 roms on to it?
From that thread, I've downloaded the very top attachment, and placed that in my directory with the full BLACIMG.nbh file and the other files and I'm using that to flash... It's progressing, 20%, 21% etc...
Does that sound like I'm doing it right?
After I used the USPL file, which completed successfully, the bootloader now says 1.15xxxx..
Thanks for the help, really appreciated, I'm a techy programmer myself, but never felt so stumped by technology before...
Mike.
i-CONICA said:
So with my 1.14.25.24 Touch HD, should it be possible to put the latest WM 6.5 roms on to it?
From that thread, I've downloaded the very top attachment, and placed that in my directory with the full BLACIMG.nbh file and the other files and I'm using that to flash... It's progressing, 20%, 21% etc...
Does that sound like I'm doing it right?
After I used the USPL file, which completed successfully, the bootloader now says 1.15xxxx..
Thanks for the help, really appreciated, I'm a techy programmer myself, but never felt so stumped by technology before...
Mike.
Click to expand...
Click to collapse
Yes, you are able to flash latest WM 6.5 roms onto your device. From what I've read everything your doing sounds right. Once you have SPL 1.15.USPL you are reading to flash rom. Just follow guide and you'll be fine
Hi, I've used the HSPL 1.56 as advised and ran the ROM flash again, it completed successfully, and I get as far as the orange Windows screen after tapping to setup the screen, There's an orange scroll/progress bar and then the Phone restarts...
I get to the smoky desktop background after it restarts, but it's in 3 colours, and is really unresponsive. Seems no different than it was before using the HSPL... If I turn off the screen and turn it back on again, it shows in full colour, but still quite unresponsive to touches and none of the softkeys do anything. It quickly crashes..
Any ideas what could have gone wrong?
Again, really appreciate the help.
i-CONICA said:
Hi, I've used the HSPL 1.56 as advised and ran the ROM flash again, it completed successfully, and I get as far as the orange Windows screen after tapping to setup the screen, There's an orange scroll/progress bar and then the Phone restarts...
I get to the smoky desktop background after it restarts, but it's in 3 colours, and is really unresponsive. Seems no different than it was before using the HSPL... If I turn off the screen and turn it back on again, it shows in full colour, but still quite unresponsive to touches and none of the softkeys do anything. It quickly crashes..
Any ideas what could have gone wrong?
Again, really appreciate the help.
Click to expand...
Click to collapse
Sounds like something went wrong when you flashed HSPL 1.56. Check your SPL in bootloader. Does it say SPL 1.56.Olinex?
No. It still says SPL-1.14.0000.
When I've run the HSPL 1.56 and it says it completed successfully... :S
These are the steps taken.
I've updated the vista driver for the USB connection.
Ran the USPL.exe which completed successfully "Happy flashing".
Ran the HSPL 1.56 as advised above, then ran BlackstoneRUUWrapper.exe which came with the WM6.5 Leo.
Now, the bootloader says SPL-1.14.000.
Thanks for the help so far.
You should really be posting this in the dummies guide thread.
Have you tried this:
Troubleshooting - manual SSPL
Boot up your phone.
Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
Go to step HSPL3 if successful.
Post any further queries in that thread
I am trying to HARDSPL my Tilt 2 and keeping getting not connected errors [264]. I have tried auto and manual. I placed the CAB file on the device and re-ran. I tried it in Win 7 and XP Mode. The deivce is connected, I can browse files thru the PC, Outlook is syncing, etc...
What will happen if I flash a new ROM without HARDSPL?
osu9400 said:
I am trying to HARDSPL my Tilt 2 and keeping getting not connected errors [264]. I have tried auto and manual. I placed the CAB file on the device and re-ran. I tried it in Win 7 and XP Mode. The deivce is connected, I can browse files thru the PC, Outlook is syncing, etc...
What will happen if I flash a new ROM without HARDSPL?
Click to expand...
Click to collapse
It won't flash at all.
Make sure you're running the file as administrator, other than that I have no idea what else you can try.
Hope this helps.
search for "enablerapinew.cab" and install
You need to post in the HardSPL thread, if you are having trouble with HardSPL
Thanks for the replies. I am making progress, but still not there.
I already had the enablerapinew.cab installed and I am using the manual flash method.
I "ran as admin" and it started the flash process. This time I got progress bars on-screen and on the device, but both stayed stuck at 0% until the flash utility timed out and walked me thru the recovery process.
I am using Windows Mobile Device Center 6.1.6965. It shows connected but drops the connection when the flash process starts. I assume this normal.
Any other suggestions.
osu9400 said:
Thanks for the replies. I am making progress, but still not there.
I already had the enablerapinew.cab installed and I am using the manual flash method.
I "ran as admin" and it started the flash process. This time I got progress bars on-screen and on the device, but both stayed stuck at 0% until the flash utility timed out and walked me thru the recovery process.
I am using Windows Mobile Device Center 6.1.6965. It shows connected but drops the connection when the flash process starts. I assume this normal.
Any other suggestions.
Click to expand...
Click to collapse
Hmm at least I helped a little, try updating the Device Centre to the newest, which I believe you acually.
A couple more things to try, one you need an active internet connection (can only assume you have this) and I found this on the HardSPL thread...
"if you get error msg for hard-spl program where it can not connect to device than use the cab that the hardspl program asks you to install on device: especially for tilt2 users.
Once you install the cab (on device), rerun the hard-spl program. DO NOT freak out as your device completely powers off. leave the usb cable plugged into device and computer and follow onscreen prompts."
Also make sure your radio is on (aka you have signal on your phone/it's not in airplane mode) and the basics such as the cable and the USB the device is plugged in to.
Once again, hope this helps
Problem soved. I published my answer in the Hard SPL thread.
http://forum.xda-developers.com/showthread.php?p=6518785#post6518785
Issue solved, Thread Closed
i tried to flash my xperia,and now i'm stuck.last time i flashed it without any problems.i've got touch flo on it ,and now i want something different.the problem is when i enter the hardspl the tricolor screen starts and then the white screen comes with loading..then i get the message connection error and i'm stuck on the loading screen...i've already tried hard reset....someone please help...
According to russell eclair blog and guide, your problem as you described is caused that you don't connect your X1 to Active Sync.
As it described, in HardSPL case is different to flashing ROM. So you have to connect your X1 to computer through Active Sync (unselect high speed @USB to PC) then you may run the hardSPL.
I have never had such problem so what I can tell is what I read on the russell eclair blog. If you need more information go to his blog (search it from google is allright). I hope it's helpful.