Hello everybody. I'm french.
I've a little problem since few days cos my kaiser is fallen in water few seconds.
it run ok. but the blue led for bluetooth is always powered on. I've flahed with a new rom but the problem is always here.
Anybody can help me please ?
Hi my french friend!
I'm italian (o paese do sole e do mare...> acqua) e i've THE SAME problem..THE SAME
Seems a electronic issue ...
an integrated transistor seems shortcut .. flashed some hspl/roms/radios...nothing
I tried with programs to control the LEDs, but do not work (error when starts)
sigh
Hi zorrykid !
I think me to it's a shortcut. I wait and see drying after few days.
We are lucky it's run !
kondorxp said:
...I wait and see drying after few days...
Click to expand...
Click to collapse
try...good luck!
kondorxp said:
We are lucky it's run !
Click to expand...
Click to collapse
My kaiser got wet last summer in the rain. The leds worked quite strangely for couple days, but works fine now.
why do people think its a good idea to turn, or keep, their phone on after dropping it in water. that is usually why it stops working.
purgiaali said:
My kaiser got wet last summer in the rain. The leds worked quite strangely for couple days, but works fine now.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
noodles21o2 said:
why do people think its a good idea to turn, or keep, their phone on after dropping it in water. that is usually why it stops working.
Click to expand...
Click to collapse
Yess'! ahahah
Ok,
I've try some things...
led blue always fixed
1) wifi switched on = strong regular white flashes every second
at the same time
2) BT switched on = blue light emitting small flickering...as if stopped for a infinitesimal moment the blue light..
the electronic part that drives the LED is damaged, always switch on...
Someone can show me pictures of the area below the leds / speaker (photo, link)
Thank you
Yeah!
After more than 4 months my blue LED back to blink again.... incredible!!
Related
Is it normal that my device dont react on 10 points from both sides ?
10 points from both sides? I don't quite get what you mean here, can you elaborate a bit?
why do you need 10 detections at all?
These parts dont work on my device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mine either.
Fire up a drawing program and try and draw a line that starts at one side and finishes at the other, seems you can't.
Top to bottom is fine though.
Mine is inconsistent. when drawing from middle to left, it usually stops 5-20px from the edge. When drawing from middle to right, it stops 5-15 px from the edge. When drawing from outside left and into middle it starts on 1st pixel, when drawing from outside right into middle, it starts on 2nd-5th pixel.
This may be an explanation why A on qwerty keyboard is sometimes hard for me to hit with my big fingers.....
But, good to know im not alone, yea its hard to hit Q and P for me :/
last time i checked it works fine on stock rom, but on cm7 i cant use those edges either.
v10B stock rom/baseband/kernel all seems fine. well seems atleast.
OK, good to know but there is no Slovak ROM so i dont know what to flash as stock ^_^
That would be Euro Open
Or whatever other ROM you would like to use. There are differences, but there's nothing stopping you from using one not specifically for your country. Some releases may miss your language though..
IEski said:
OK, good to know but there is no Slovak ROM so i dont know what to flash as stock ^_^
Click to expand...
Click to collapse
stock on Slovak O2x is v10b Euro Open... i had that too, but now i have v10d uk, since it should be one of the latest...
IEski said:
These parts dont work on my device
Click to expand...
Click to collapse
I have an unresponsive area on my device as well, but at the bottom only not the sides...
Marked in yellow...
Hi guys, I have a problem, my Ace's screen isn't showing anything..
What happened:
Well, I was fine using Lewa..then after a sudden, weird colors came up, so I pulled the Battery and started the phone again..only the soft buttons made light up.
I know this is hardware because:
1. ADB picks up the device ( No errors in LOG)
2. These pictures:
Screenshot: ( Took with ADB )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Actual Screen: (Blank only BLN)
I can't take this back to repair, so have any of you encountered this problem and fixed it at home?
===============================================================================================================
Update:
I opened her up, guess what..water, lots and lots of it. And most of the water is around and on the Display adapter.
So I am going to try and clean it with Alcohol and if that fails I'll buy a new screen (Cheap about 20$)
Luckily I have 2 Ace's
Is the recovery working (displaying)?
Edit: i also have an problem like this so i had flashed the rom via odin.
Now its working fine..
No, it's hardware...i'll update the OP to show you why. And no it doesn't nothing does.
PulseDroid said:
No, it's hardware...i'll update the OP to show you why. And no it doesn't nothing does.
Click to expand...
Click to collapse
Ohh i see..
But how comes the water there?
In the actual meaning that the phone is totally packed only charger socket and headphone socket is opened..
It's not water it's moist..from the air. And no everything.
PulseDroid said:
It's not water it's moist..from the air. And no everything.
Click to expand...
Click to collapse
Don't try washing with alcohol unless you are sure...! You might get into a bigger trouble ! Just connect your phone to the charger & let it heat up. The moisture flies off by itself.
I used to have beautiful life before. Now I'm in engineering...!
Don't try washing with alcohol unless you are sure...! You might get into a bigger trouble ! Just connect your phone to the charger & let it heat up. The moisture flies off by itself.
Click to expand...
Click to collapse
No, no. It left a residue, and yes alcohol will work. I have been using it for about 2 months now with the residue on.
PulseDroid said:
No, no. It left a residue, and yes alcohol will work. I have been using it for about 2 months now with the residue on.
Click to expand...
Click to collapse
Fine then...
I used to have beautiful life before. Now I'm in engineering...!
Any idea what this is? Top of phone has that orange and green charging / notification light which shows up as a tiny dot in one of those little holes.
My phone has a green light that's constantly on for the past week or so on the bottom in one of the little holes directly below the H in HTC.
yuppicide said:
Any idea what this is? Top of phone has that orange and green charging / notification light which shows up as a tiny dot in one of those little holes.
My phone has a green light that's constantly on for the past week or so on the bottom in one of the little holes directly below the H in HTC.
Click to expand...
Click to collapse
Got a photo?
Well, no.. because I only have my cell phone camera. I could have a relative snap a photo tomorrow while I am over for Christmas, but just as easy to draw the dot on myself:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look under the H at the bottom. I'm pretty sure I've never seen this on until this past week or so. It's on constantly. That's the exact hole the light is in.
Glitter? No LED down there
Sent from my 831C using Tapatalk
use the front camera and hold your phone in a mirror to take the pic
I doubt it would be glitter. I doubt it has anything to do with the screen as even when the screen is off that light is on. I will try taking it in the mirror later, I'm just not sure if you'll see it as the holes are so small.
yuppicide said:
I doubt it would be glitter. I doubt it has anything to do with the screen as even when the screen is off that light is on. I will try taking it in the mirror later, I'm just not sure if you'll see it as the holes are so small.
Click to expand...
Click to collapse
It would be easy enough to tell if it is a light or something stuck in the hole. Turn off the device. If it is still there, it's not a light. Or the lights in the house (at night), if it is there, it's either a light or glow in the dark glitter.
Hi,
On my watch urbane, I have some red dots on the top of the screen. It's seems to be death pixel, so I tried some app to fix pixels, but it's doesn't work.
Anybody has this issue ? Or know if it's possible to do something ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks you.
johann673 said:
On my watch urbane, I have some red dots on the top of the screen.
Anybody has this issue ?
Click to expand...
Click to collapse
Mine too. I'm sending mine in to LG. Give them a call.
Mine got burnt pixels around october last year.
Wonder how expensive it is to get a fix, but also not sure if there is a reason to proceed as the watch is already not supported.
johann673 said:
Hi,
On my watch urbane, I have some red dots on the top of the screen. It's seems to be death pixel, so I tried some app to fix pixels, but it's doesn't work.
Anybody has this issue ? Or know if it's possible to do something ?
Thanks you.
Click to expand...
Click to collapse
Hello, did you ever figure out a fix by the way? I'm having the same problems in the lower left side of my screen. Ive searched online for days to no avail. Thanks in advance.
johann673 said:
Hi,
On my watch urbane, I have some red dots on the top of the screen. It's seems to be death pixel, so I tried some app to fix pixels, but it's doesn't work.
Anybody has this issue ? Or know if it's possible to do something ?
Thanks you.
Click to expand...
Click to collapse
Welcome to the charm of 1st generation P-OLED display.
Other than replacing the screen, I know of no fix for this.
And, in my experience, the dots will continue to grow.
I started out with 2 tiny dots either side of the "1".
Two years later, From "12" to "2" was pretty much wiped out...
Dropped her in the Yellow Breeches while fishing. About 2 ft deep quick running stream. Took about 10 minutes to find (it got dark and AOD was face up).
Worked perfectly right away (prune fingerprints never work) and until I got home an hour later, then saw this message. Still working perfectly fine at the moment, but will wait it out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks good to go!
nice demonstration! thanks for letting us know what happens if...
cheers
Thats pretty cool, totally an "thinking outside the box" feature.
Deadmau-five said:
Thats pretty cool, totally an "thinking outside the box" feature.
Click to expand...
Click to collapse
Same detection/response capability exists on the 4a which offers no moisture protection. Mine got inn the way of a toppled water glass (light splash) and immediately displayed this message. 15 min later was good to go. Could still use phone during this period, although I opted not to.
Nice feature... My 2xl got wet, no message though. When the battery was low, I naturally plugged it in and of course it cut off immediately. Now it only charges on certain chargers. Would have been nice to have that warning.
So, my "lesson learned" is, if your phone gets wet, do not plug it in until you are sure it is completely dry!
Gary.Plattenburg said:
Dropped her in the Yellow Breeches while fishing. About 2 ft deep quick running stream. Took about 10 minutes to find (it got dark and AOD was face up).
Worked perfectly right away (prune fingerprints never work) and until I got home an hour later, then saw this message. Still working perfectly fine at the moment, but will wait it out.
View attachment 5409865
Click to expand...
Click to collapse
Pixel 5a is not waterproof but it is water-resistant. its rating is IP67 which survives fresh water up to one meter for 30 mins max, so you're good to go.